HO Union X-3 Tankcar - Atlantic Refining #32642
Detail Variations:
Equipped with KC brakes
Rapidos model has been developed with the help of noted UTLX tank car expert Steve Hile. We are offering two distinct versions, the K-brake equipped cars, good before 1953, and the AB-brake equipped cars good from the 1940s onwards. In addition to brake equipment, our models will feature correct handbrake and coupler cut bar arrangements which differed depending on the brake equipment installed. Either Andrews or -Bettendorf- cast steel trucks will be fitted, depending on the era.
Other features of Rapidos model include:
Designed from original blueprints
Correct tank bolster pads
Correct 54inch diameter dome
Correct UTLX-style warning placard holders
Full underbody detailing with two distinct brake systems offered
Correct end platforms
Correct coupler cut bars and hand brake mountings
Semi-scale couplers and coupler boxes
Free-rolling turned metal wheels
Accurate paint and lettering
Multiple road numbers available per scheme.
HO GMD-1 - DCC & Sound - Canadian National (1900s Noodle w/ Red Cab) #1910
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
Athearn HO Scale - RTR 30,000 Gallon Ethanol Tank Car - CHSX - #3 - (3 pack)
Detailed Information
255080, 255088, 255095
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports, tank saddles and printed placards
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
100-ton roller bearing trucks
36in machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale upper and lower shelf knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18in
HO GE 44 Tonner Phase IV - DC/DCC/Sound - Pennsylvania #9333
The Rapido Trains HO scale GE 44-Tonner locomotive features:
Multiple phases and detail variations
Phase Ic (never offered before in plastic) both with and without lighted hood side number boards
Phase III with positionable top hood hatches
Phase IV
Heavy, die-cast chassis and fuel tank
Correct fuel tank skirting in two styles
Separately-applied door latches
Full cab interior
Photo-etched cab steps
Smooth running, strong coreless motor with dual flywheels
DC models are DCC ready with NEXT-18 decoder socket and speakers
DCC models are sound equipped with ESU decoders and sounds and include our own -Mo-Power- power capacitor
Pikestuff 1015 HO Shingle Roof
Color : Grey
5 x 8 inch piece
Kit - 150ft Scale w/4 Piers
The Rix Wrought Iron Highway Overpass for HO scales is modeled after the bridges built to span over railroad tracks. The Rix Highway Overpass Wrought Iron consist of 50 foot spans which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
Athearn G25586 - HO 33,900 Gallon LPG Tank - PROX #3 (3 Pack)
Multiple road numbers, unique numbers between singles and 3-packs
Three different body phases: early, flat panel, and late
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports and tank saddles
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
Full underframe detail featuring body-mounted brakes or truck-mounted brakes as per prototype
Printed placards, where appropriate
Body-mounted, McHenry? scale double-shelf knuckle couplers
100-ton trucks with animated rotating bearing caps and printed road numbers
Machined metal wheels with RP25 contours
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Weighted for optimum performance
Minimum radius: 18in - Recommended radius: 22in
HO Deluxe Gas Station Interior Detail Set (18)
Unfinished metal cast details to complete the look of your filling station interior. Floor jacks, tool chests, tires, air compressor, etc.
HO RTR 68Ft Bulkhead Flatcar - Canadian National CN #622409
Product Information
Moving large HO loads will be easy with these WalthersMainline 68Ft Bulkhead Flatcars! Used by Trailer Train / TTX and other railroad poweners, features of the models include:
One time run of these road numbers, order now - limited quantity available!
Based on Bethlehem BSH71A Cars
Prototypes introduced in 1979-80 and still built today
Used by TTX and railroad owners to handle sheet steel, crated and tarped cargo, building materials and other large loads
Detailed nailable -steel- floor
-Steel- bulkhead sheets
Detailed brake equipment
Die-cast metal underframe for outstanding performance loaded or empty
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) magnetic metal knuckle couplers
PLEASE NOTE - As these cars are the correct prototype length and feature detailed underbodies, a minimum radius of 24inch is suggested.
HO Lightweight Coach - Erie Lackawanna #1306
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
53Ft Railgon Gondola - Ready To Run - Delaware & Hudson #15026
(black, white, large name)
Product Information
A must-have model for any HO layout from the 1980s to the present, the WalthersMainline 53Ft Railgon Gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53Ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America. A great addition to your HO freight car fleet, the models feature:
Based on Railgon 310000 series cars
Used in nationwide pool service from 1980 to the present - many later leased and relettered by new operators
Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
100-ton roller-bearing trucks
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Styrene Gearbox Shims (20pk)
For #5, 9, 20-Series & 40-Series, & whisker couplers.
Any coupler using the #232 (NO.5) or #234 gear boxes.
Shims will need to be trimmed to work with #242 whisker gear boxes.
HO Scale Loading Dock Ramp - 4pkg
Forklift Dock Plates, package of 4
Evergreen Scale Models 2040 .040in Opaque White Polystyrene V Groove Siding (1 sheet)
.020in (.50mm)THICK X .040in ( 1.0mm) GROOVE SPACING X .011in (.28mm) GROOVE WIDTH. GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
6in X 12in
N Scale Standards Gauge
Designed and developed by the NMRA (National Model Railroad Association) Engineering committee, this pocket sized gauge enables you to check all important dimensions on your track and rolling stock as follows:
Gauge of track and turnouts
Flangeway depth and -check gauge-
Clearance
Height of loading platform
If cars do not run correctly, this gauge will help you pinpoint the trouble. Complete instructions come with each gauge
HO 1987 Chevrolet Caprice Sedan - New York Police Department - 75th Precinct #2907
This HO Scale 1987 Chevrolet Caprice Sedan from Brekina is based on the widely driven North American sedan. The model features a detailed injection-molded plastic body with fine decoration, interior seats and window glazing and chrome-plated parts as appropriate. This model is ideal for your 1980s and later street scenes.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO New Look Bus Kansas City Metro
Destination Sign:
Kansas City
Detail Variations:
Bus-o-rama Panels
Air Conditioner
Rear EIP Exhaust Package
4-window exit door
Late-style engine door
HO EMD SW1200 - DCC/Sound - Penn Central (ex NH) #9186
(Flexicoil Trucks)
Note: #9186 will NOT feature the larger Penn Central lettering on the hood.
The HO Scale Rapido SW1200 features:
- Designed from original blueprints and field measurements
- Heavy diecast frame, chassis and gearboxes for superior pulling power
- Rapidos renowned silky smooth-running drive system
- Working cab interior light and inspection lights
- Fully detailed Type A or Flexicoil trucks, as appropriate
- Full cab interior with working cab interior light and non-working fire extinguisher and fridge (where appropriate)
- Working headlights and illuminated number boards at both ends
- Some models have a rotary beacon or flasher/strobe as appropriate
- Separate handrails, including crash bars inside the cab
- Multiple exhaust stack and battery box door styles
- With or without working drop steps, as appropriate
- Incredible underbody piping and conduit detail - a Rapido hallmark!
- DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings from a 567 prime mover
HO 60ft Hi-Cube Plate F Boxcar - BNSF #761101
Bring your freight car fleet up to date in minutes with the Walthers Mainline(R) 60ft Hi-Cube Plate F Boxcar in HO Scale. Currently in service for a variety of railroads and TTX, these taller and longer cars offer shippers increased capacity making them a favorite for lumber, canned goods, beer, wine, steel, appliances and other manufactured goods that require protection in transit.
Features of the 60ft Hi-Cube Plate F Boxcar include:
-Limited edition - one time run of these roadnumbers
-Prototypes now in service with TTX and several railroads
-Used to haul lumber, beverages, canned goods, appliances and more requiring protection in transit
-Prototypically correct roof with both X and diagonal panels
-Separately applied latch bars
-Detailed underbody with cushioned underframe and brake gear with correct angle-mounted reservoir
-100-ton roller bearing trucks
-36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
HO Dash 9-44CW - DCC/Sound - KCS #4404
KCS FEATURES:
- Unique art per road number
- Clean patched areas where former BNSF logos resided
- K3LA Horn
ROAD NUMBER SPECIFIC FEATURES:
#4404
- Silver replacement horn
- faded stripes on the engine compartment
#4430
- PTC antennas
- replacement air conditioner from a Santa Fe Superfleet unit
DASH 9-44CW SERIES LOCOMOTIVE FEATURES:
- Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
- Etched, see-through walkway steps
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
Code 83 Inspection Pit
Perfect for use in loco servicing scenes, roundhouses, engine houses and more. Includes pit, Code 83 rail and details.
Total Length 11.7inch 297mm long
Shrink Tube Assortment (4pcs)
This assortment includes 6 inches each of 1/16, 3/32, 1/8, and 1/4 inch diameter tubing for insulating solder connections.
HO RTR SD40T-2 - DCC & Sound - Southern Pacific (SP 1990s) #8370
SP 1990s Era ROAD NUMBER #8370 FEATURES:
Red welded/removed nose gyralight
Snoot nose
relocated Nathan P-3 Horn
Standard forward ditchlights
Cab roof mounted bell
Faded paint
Missing/faded body and nose lettering
SD40T-2 SERIES LOCOMOTIVE FEATURES:
Fine scale handrails
Separately applied air tanks
See through cab windows
Welded ECAFB
Photoetch windshield wipers
LED Lighting
HTC truck sideframes
All-wheel electrical pickup
See-through dynamic brake fans
-Mushroom- nose vent on right side
Separately applied wire grab irons
Fully assembled and ready-to-run
Rubber trainline and MU hoses with silver ends
Standard Dash-2 cab, windows correct per prototype
See-through radiator grilles with new rear truck gearbox speific for the tunnel motor
Speed recorder attached to appropriate axle per prototype (except undecorated)
McHenry scale knuckle spring couplers
Highly-detailed, injection molded body
Painted and printed for realistic decoration
All-wheel drive with precision gears for smooth and quiet operation
5-pole motor with flywheels and multi-link drivetrain for troublefree operation
DCC Ready 21-pin NEM Quick Plug technology
Nickel plated, blackened machined wheels
Wheels with RP25 contours operate on all popular brands of track
Replacement parts available including motor brushes
Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
Patches applied and shaped per road number matching each corresponding side to the prototype
Duplicated look and feel of -In Service- equipment; -Tattered and Torn- just like the real thing
Some Prime for Grime models feature paint scheme variations
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard Econami Sound by SoundTraxx
Sound units operate in both DC and DCC
Sound units operate in both DC and DCC
All functions NMRA compatible in DCC mode
Full DCC functions available when operated in DCC mode
Some functions are limited in DC
Engine, horn, and bell sounds work in DC
Slow speed control
All functions NMRA compatible in DCC mode
CV chart included in the box
Excellent Slow speed control
Effect lighting (if applicable) using F5 and/or F6
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
Tangent Scale Models HO PS4750 Covered Hopper PVGX -Peavey Delivery 5-1980
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
PVGX -Peavey Delivery 5-1980- Peavey was a large grain products shipper with elevators scattered around the Midwest from Duluth-Superior to New Orleans, these cars were found on all corners of the North American railroad network, for example, cars photographed on the SP in San Luis Obispo! This Peavey blue car includes a sharp red-orange PEAVEY across the center of the car. Most small stenciling is white, and this car includes the distinctive North American Car leasing logo to denote its ownership status
HO Maxi I Well Cars - DTTX #73146 (5pk)
Era: 1971-1990, 1991-2009
MODEL FEATURES:
- Fine ladder detail
- Separately applied brake piping and trainline hoses
- Weighted for optimal performance
- Body-mounted McHenry lower shelf operating scale knuckle couplers
- Prototypically correct 33 and 38 inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
HO 65Ft Deck Truss Bridge Kit - Code 100 Nickel Silver Rail
Product Information
The Atlas HO Scale Code 100 65Ft Deck Truss Bridge is based on a commonly used bridge used across North America. The bridge is supplied with Code 100 nickel silver rail on its deck surface and is compatible with all Code 100 track. For track planning purposes it is 9inch(22.9cm) long - the same size as a standard piece of straight Snap Track.
N Scale AAR 40Ft Steel Boxcar - Ready to Run Silver Series - New York/ Susquehanna & Western
(green, black, yellow, -Suzy Q- Logo)
Product Information
This Bachmann Silver Series AAR 40ft Steel Boxcar is based on cars used for moving all kinds of freight that needed protection from theft and weather. These durable 40ft steel boxcars were once a common sight on railroads large and small. features a detailed injection-molded body with applied roofwalk, realistic decoration, metal wheels and E-Z Mate magnetic knuckle couplers.
HO 1942 Chrysler Station Wagon - South Sea Blue, Woody
HO PS-2-4427 High Side Covered Hopper - Milwaukee Delivery 3-1967 #97890
Product: Pullman-Standard PS-2CD 4427 ?High Side? Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36″ Wheels
? Milwaukee Road MILW ?Delivery 3-1967? wears the classic yellow and black graphics as applied to this 300-car order from Pullman-Standard in 1967. Tangent?s previous run from 2018 featured Milwaukee?s 1968 order of cars with gravity-pneumatic outlet gates. We have carefully replicated the lettering on every panel, bay and center sill from bold MILWAUKEE ROAD to the tiniest PS lot 9174 stencil number. All of the lettering is present and accurate. These cars feature Miner gravity gates and a PS ribbed-style roof hatch. The model also features 100-ton Barber S-2 trucks with rotating Timken caps. Each SKU number varies with CAPY, liner stencil and related Pullan date information. We hear you Milwaukee Road modelers, and your continued requests for more MILW Tangent covered hoppers in our correct shade of Federal Yellow!
Code 100 Streamline Three-Way Turnout w/Medium Radius - Electrofrog
Nominal radius: 36in (914mm)
Angle: 12 degrees
Length: 8-21/32in (220mm)
Lubricant - Lite Oil - 1/2oz
Multi-viscosity oil with an additive that reduces its tendency to thin out at high temperatures. Good general-purpose hobby lubricant for most light to medium load-bearing applications. Includes extension tip for hard-to-reach areas.
For use on:
- R/C bearings and linkages
- HO and larger scale model railroad side rods, gears, journals and motor bearing surfaces
- Workshop and garden tools, small appliances and casters
Viscosity: cSt; at 40 Degrees Celcius ...47
HO 40Ft Hi-Cube Dry Containers - Maersk Line (Big Logo) (3pk) Set #2
3 pack road numbers include : MSKU 261465/280290/289148
Body: Type A
Door: Type B
Latch: Type A
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Southern Pacific(TM) Rack / Flatcar #515436
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
Model Features:
- Scaled from field measurements & diagrams of a GO F59PH
- End metal handrails with plastic stanchions
- Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
- All-metal etched grilles
- Full cab interior
- Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
- Operating headlights, rear light, and ditch lights
- GO units feature functioning tri-color class lights (white, green and red)
- American units feature functioning red marker lights
- Accurate sounds recorded from a GM 12-710G3A
- DCC/Sound units come equipped with an ESU LokSound decoder
HO H21A 4-Bay Hopper - Pennsylvania (PRR Black, Plain Keystone) #695602
1961+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Thrall 5-Unit Rebuilt 40 Ft Well Car - Ready to Run - Santa Fe Leasing SFLC #1033 A-E
(yellow, black, yellow conspicuity stripes)
Expected Delivery: July 2020
Product Information
Modernize your HO Scale intermodal fleet in minutes with WaltherMainline Thrall Rebuilt 40Ft Well Cars! As the 53Ft container quickly became the standard for domestic shipping, older well cars built to carry 48Ft boxes soon fell out of favor with railroads. Most were only a few years old, so starting in 2003 Thrall began a rebuilding program that shortened the wells to the standard 40Ft on both single and five-unit cars. Today they can be seen carrying 20Ft and 40Ft containers in the well, with 40Ft and 53Ft units on top. Fully assembled and ready for service, the models feature:
-100- and 70-ton roller bearing trucks
-Correct 36Inch and 33Inch turned metal wheelsets
-Heavy die-cast metal frame for superb performance empty or loaded
-Finely molded 3-D brake rods with chains, brake piping and weld lines on body
-Separate deck-mounted brake detail with piping, IBC storage boxes and realistic walkways
-Proto MAX(TM) metal knuckle couplers
HO AutoFlood III RD Coal Hopper - UP/CMO #504360
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO 19,600 Gallon Tank Car - Tate & Lyle (Repaint) #51228
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Date: BLT 3-98
HO Greenville 86ft Double Plug Door Box Car - Erie Lackawanna #92078
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2A Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: August 2021
Erie Lackawanna (EL) -Original 1965- represents the first of four Erie Lackawanna orders for Greenville 86ft Double-Door box cars. Delivered in 1965, this group of 100 cars featured Center-of-Car Cushioning with truck mounted brakes. This car includes the large spelled out Erie Lackawanna on the left side of the car, and a large gold -Cushioned Car- and large white Erie Lackawanna diamond logo at the right side of the car. We sweat the little details too – our model is equipped with an accurate Ajax hand brake, Apex crossover platforms and 70T trucks with 33inch wheels and rotating Timken roller bearing caps. Remember those truck mounted brakes mentioned earlier? Yes, our trucks have the correct truck mounted brake beam to match that important detail. Finally, this Erie Lackawanna offering was part of the Fords Chicago Stamping Pool, resulting in an accurate Chicago Heights, Illinois return route stencil. Our EL masterpieces are available in six different numbers. EL Fans rejoice!
HO Value Line RTR - 13 Panel Coalporter - Conrail (EABS Yellow) #505171
Details:
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
Conrail rostered a large fleet of coalporter cars. Hollidaysburg Car shops rebuilt old triple hoppers, built in the mid-1960s, into the G52H, G52L and G52R class starting in 1991.
The orange ends denote that the car was used in one of two Electronic Air Braking System (EABS) Test Trains in 1996. One train had orange painted ends and one had yellow painted ends. EABS applies the brakes to every car of a train simultaneously via an electronic brake signal, allowing a train to stop smoothly in 30-70percent less distance than traditional brake-equipped trains.
Each of the two EABS equipped trains had a device called the Head End Unit (HEU) in the lead locomotive of that train. In -full electronic- mode, which required all cars in the train to be EABS equipped, the engineer used the HEU to apply the brakes. The HEU then electronically and simultaneously transmitted this information via intercar connectors to Car Control Units (CCU), which were mounted on every cars braking system. The CCUs adjusted the brake cylinder pressure accordingly until the HEU issued a different command. Every car then braked the same amount at the same time.
When Conrail finished their testing, they removed the systems from the cars and placed the train back into regular unit coal service. Eventually, the cars were assigned to other unit coal trains and general merchandise service. They retained their orange or yellow ends, with some cars never having their Car Control Units removed.
Some of the G52L class remained in service well into the 2000s, some lasting into 2012.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - BLUX #1008
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Walthers Kit -
-Typical of main facilities housing clay processing, mixing and molding operations
-Great for steam or diesel-era operations
-Highly detailed brick walls and arched windows with realistic thin frames
-Large one-piece brick smokestack
-2 large and 5 small brick stacks, with 12 pallets included for added realism
-Molded in two colors and clear
12-3/4 x 6-1/2 x 7in 31.8 x 16.2 x 17.5cm Cornerstone 4102 HO Brickworks
Trainman HO Thrall 4750 Covered Hopper - Canadian National (IC) #769564
Features:
-Weighted body
-Equipped with AccuMate Knuckle Couplers
-Trucks equipped with free-rolling metal wheels
-Accurate painting and lettering
AccuMate couplers are made under license from AccuRail, Inc.
HO FMC 4700 Covered Hopper - AFEX #106
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches
HO New Look Bus - SEMTA (Detroit) - 450 Detroit via Royal Oak - Deluxe #1560
All of our HO scale New Look Bus models include:
- Correct tubular profile traced from a 3D-scan of a real New Look Bus.
- Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
- Optional left-side emergency exit door, a trademark of the early production versions.
- Full interior including separate highback seats and grooved flooring.
- Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
- Steerable front wheels and REAL rubber tires.
- Three types of bumpers − steel, water and rubber.
- A wide variety of optional detail parts included.
- Separate advertisement frames included with each model.
- Pre-installed route destination signs for added realism.
- Working interior lights, headlights and tail lights.
- Pre-installed route destination signs for added realism
HO EMD SW9 - DCC & Sound - Illinois Central (IC Black Scheme) #467
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
Illinois Central:
Delivered in 1951
Road style end rails with drop steps
Short side handrails
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
Construction Site Mobile Office Kit
Seen at Construction Sites from 1980s to Present
Easy to Build
Must-Have for Modern Construction Sites
Add-On Windows, Doors & Air Conditioner
Printed Signs
Designed for Easy Assembly
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
Built-&-Ready Landmark Structures - Fill-er Up & Fix-er
Assembled - 6-5/32 x 5-13/62 inches (15.6 x 13.2 cm)
Heres an old-time full-service station that offers gas and repairs at one location. Details include old gas pumps, old and new tires, a pop machine, junk, signs and more.
HO EMD GP35 - Paragon4 Sound/DC/DCC - NYC #6146
(Black w/White)
Ubiquitous on American railroads, the EMD GP35 is a 4-axle diesel-electric locomotive built by EMD and subsequently General Motors Diesel in the mid 1960s. Over 1300 of these locomotives were produced, and they were operated by virtually every major railroad in the United States. Additionally 26 units were built for Canadian railroads and another 57 units were built for Mexican railroads. These freight locomotives were powered by EMD 567D3A 16-cylinder engines that generated 2500 horsepower.
List of individually controllable lights in our EMD GP35 models:
- Headlight
- Rear Light
- Mars Light (SP only)
- Numberboard Lights (Front & Rear)
- Front Classification Lights
- Rear Classification Lights
- Emergency Light (SP only)
- Rotary Beacon (where appropriate)
- Ditch Lights (where appropriate)
- Cab Light
Road-specific detail options that are prototypically accurate for each road name:
- Truck sideframes
- Dynamic brake hatch
- Open & closed type fans
- Short hood detail arrangement
- Long hood end detail arrangement
- High short hood option where accurate
- Horn type and location
- Bell location
- Multiple front pilot types
- Multiple rear pilot types
- Accurate cut lever types
- MU receptacle arrangement
- Multiple sunshade options
- Antenna type and location
- Wind deflector type
- Rooftop AC for ATSF type
- Rotary beacon type and location
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up
- ABS Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, Wipers, and Etched Metal Grills
- Prototypical Light Operation - accurate for each paint scheme
- Prototypically Accurate Sounds for the EMD GP35 Diesel Locomotive
- Metal Kadee-compatible Couplers (2)
- Will Operate on Code 70, Code 83, and Code 100 Rail
- Minimum Operating Radius: 18 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
HO FMC 5077 SSD Boxcar - BNSF #725684
MASTER MODEL FEATURES:
- Single or Double Sliding Door where appropriate
- Multiple body styles
- Metal knuckle couplers
- Plate B Box Car
- X-Panel Roof
HO Truss Log Car w/Load - Kit
Highly detailed logging equipment with die-cast center beam, metal trucks, ribbed back wheels, log bunks, and falling stakes. Comes with three unpainted plastic logs and couplers.
HO H21A 4-Bay Hopper - Pennsylvania (PRR Red, Shadow Keystone) #135423
1954+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504823
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127495
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO Plastic Pellet Transfer Facility - Kit
Product Information
Modeling a modern Plastic Pellet Transfer is easy with this Walthers Cornerstone kit! Derived from crude oil, plastics are first formed into tiny pellets which become the raw materials for everything from soda bottles to model railroad equipment. Lightweight and easily handled by pneumatic systems, the pellets are shipped in bulk in covered hoppers and stored on-site in vertical storage tanks. Large air compressors power these facilities, which feature a number of delivery pipes and control valves. When assembled, the Plastic Pellet Transfer is great by itself at trackside as a truck reload point for local deliveries. Its easily combined with other big industrial buildings, especially those in modern industrial parks, to create a custom plastics plant anywhere along your line. You can also use it model other types of pneumatic storage and delivery systems like those found at commercial bakeries, flour mills, chemical or fertilizer plants and many, many other industries found at modern industrial parks. The Plastic Pellet Transfer kit includes four storage silos, unloading piping for two hopper cars, walkways and railings, a compressor shed, piping and decal signs. Plus, molded-in cut lines are provided to make kitbashing fast and easy.
Dimensions:
19-5/8 x 4-1/16 x 8-1/4inch (49.8 x 10.3 x 21cm)
Fits 1970s to present
Four tall storage silos
Includes loading rack for two cars with piping and compressor shed
Overhead walkways
Decal signs
Easy-to-build plastic kit
Molded in appropriate colors
Gone Bust Block - Kit
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
#144 Standard Head All-Metal Whisker(R) Self-Centering Knuckle Couplers Short Underset Shank 2 Pair
All-metal -whisker- coupler with metal self-centering spring. Designed and tested for reliability, durability and long life. Compatible with Kadee HO couplers. Fits most HO scale equipment; can be used in place of No. 5 coupler.
N Scale AutoScenes - Pickem Up Truck
It aint pretty, but this old, rusty truck gets the owner around town just fine!
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - New York Central (NYC Green) #157247
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO ACF PD3500 Flexi Flo Hopper -
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990
Car No. 897878
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
RS-18u, DCC & Sound - CP Rail w/Multimark #1832
Era:1980-1998
The Rapido Trains RS-18u locomotive features include:
-Accurately designed using our 3D scan of a real RS-18 and measurements from an active RS-18u
-Completely redesigned chassis and shell for easier access and disassembly
-Operating headlights, rear lights, factory installed ditch lights and illuminated cab control stand
-Fully-operating tri-colour class lights on both front and rear
-Rapidos innovative dead straight metal side handrails with plastic stanchions, installed at the factory
-Unparalleled underframe detail including traction motor cables and other piping, re-railer and a ridiculous number of separately-applied parts
-Roadnumber-specific details including correct battery box louvers
-Highly detailed cab interior with detailed control stand, operators seats and back wall panels
-All-new, improved drive system for 100 percent reliable running in DC and DCC
-DC(Silent) (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
-Accurate sounds recorded from a real Alco 251B prime mover
HO Dash 9-44CW - DCC/Sound - Norfolk Southern #8888
NS FEATURES:
- Dash 9-40C
- As-delivered paint scheme
- Ditch lights both ends (flash when horn is blown on DCC/sound models)
- Nathan K5LAR24 horn
- Two firecracker antennas
- Spare knuckle box on walkway
DASH 9-44CW SERIES LOCOMOTIVE FEATURES:
- Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
- Etched, see-through walkway steps
GENESIS DIESEL LOCOMOTIVE FEATURES:
- Coupler cut levers
- MU hoses
- Trainline hose
- See-through cab windows
- Full cab interior
- Walkway tread
- Windshield wipers
- Lift rings
- Wire grab irons
- Sander lines
- DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
- Body-mounted McHenry operating scale knuckle couplers
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- LED Lighting for trouble free operation
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and ?printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds the model for safe storage
- Minimum radius: 18 inches ? Recommended radius: 22 inches
PRIMED FOR GRIME MODELS FEATURE
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Dual cube speakers for optimal sound quality
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
HO 50ft 6in Boxcar - CSX #136043
Features:
- Prototypical non-terminating corrugated ends
- Diagonal paneled roof
- Single 10-foot YSD design sliding door (non-operating)
- Detailed cross-member attachment rivets on the side sills
- Weighted, detailed underframes
- True scale dimensions with accurate details
- Equipped with AccuMate knuckle couplers
HO 50ft Covered Gondola - Southern #2213
MODEL FEATURES:
- 70-ton Roller Bearing trucks
- Removable cover
- Separately-applied brake wheel
- Weighted for optimum performance
- 33 inch machined metal wheels with RP25 contours operate on all popular brands of track
- Body-mounted McHenry operating scale knuckle couplers
- Fully-assembled and ready to run out of the box
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inch
PROTOTYPE AND BACKGROUND INFO:
Gondolas are low-sided railroad cars that are used for hauling bulky loads that don not need protection from the weather. The Roundhouse 50ft gondola is representative of larger cars that began appearing on the rails in the early 1950s, and many survive today working for modern roads and contractors.
HO 89ft Thrall Bi-Level Auto Carrier - BNSF #300296
Chances are your new mini-van, light truck, SUV or crossover took its first long trip by train aboard a Bi-Level Autorack like this Walthers Proto replica! Introduced in the late 1970s as demand for pick ups and similar vehicles increased, these 89ft 6in flatcars were fitted with racks with just two decks to provide more interior space for higher profile vehicles. A key part of Walthers Auto Series, these highly detailed and fully assembled HO models feature:
- One time run of these road numbers, order now - limited quantity available
- Prototypes introduced in 1970s and still going strong today
- Used to haul light trucks and similar vehicles
- Factory-installed grab irons, ladders and brake equipment
- Perfect car for Cornerstone(R) Auto Series kits, each sold separately
- Ultra-smooth rolling 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As Walthers Proto Auto Racks are the correct prototype length, a minimum 24 inch radius is recommended for operation.
HO B-50-15 Boxcar - As Built w/ Murphy Roof - Southern Pacific (1931 to 1946 scheme) #14807
Rapidos new HO scale model of these classic boxcars include a variety of unique details, including:
Accurate sides in both wood and steel styles
Viking and Murphy roofs
Corrugated and Dreadnaught ends
K- and AB-style brake systems as appropriate
Separate ladders and grab irons
All-new T-section trucks
Free rolling turned metal wheelsets
Carmer cut levers
Metal stirrup steps
Semi-scale couplers
Accurate paint and lettering
N Scale Single-Track Curved Viaduct (15in Radius)(2/pkg)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
Accent Shakers (2pcs)
-For plant hues and flowers
-Multiple opening sizes
-Easy fill
HO AutoFlood III RD Coal Hopper - BNSF (Wedge scheme) #699623
Special paint scheme identifying a car with two rotary couplers!!
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
HO - Long Barrel Ore Hopper - CN Mineral Brown #346500 OVR Special Run
The barrel ore hopper features:
2 different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Short barrel cars have correct truck mounted brake detail
Highly detailed gates and underbody detail
Different unloading wheels for long and short cars
Different end platform equipment between long and short cars
See-through, etched metal end platforms
Full end detail, including uncoupling levers
Separate grab irons and other freestanding parts installed at the factory
Kadee #158 couplers
Walthers HO 60ft Pullman-Standard Auto Parts Boxcar Cotton Belt St. Louis South Western
Model auto parts traffic in minutes with the WalthersMainline 60ft Pullman-Standard Double Door Auto Parts Boxcar (10ft and 6ft doors). Designed to provide easier access for loading and unloading with forklifts, the prototypes were used to handle heavy loads such as engines and transmissions. Features of these unique cars include:
Updated tooling features new car sides - perfect for use with Walthers Auto Series cars and kits available separately!
One time run of these road numbers, order now - limited quantity available
Based on cars with 10ft and 6ft side doors for easier loading/unloading
Prototypes handled heavier loads such as engines, transmissions and brake drums
In service from 1960s to 2000s
70-Ton Trucks
Correct 33in RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
HO Norfolk Southern G41A Repaint 1976 w/o Hoods PRR Shops G41A Coil Car
NS GP67 Repaint 2005+ is an exciting release for us. NS rebuilt some of their G41A cars around 2000 and placed them in the GP67 class. These rebuilds were changed from 6 troughs to 5 troughs to accommodate larger diameter coils. This major change, along with yellow trough bracing, makes these cars really stand out in the crowd. The Tangent offering picks up in 2005+, where the NS cars have received their conspicuity stripes. The troughs received not-so-subtle wide white stripes down the centerline of the car to assist loading. If you read the data carefully, you will find accurate 50 Year Life Extension stenciling and painted diamonds labeling the cars for HOT steel coil service. The 125-Ton trucks feature NS reporting mark and car numbers along with 38in wheels and rotating Timken caps. These are some HOT cars for the modern era.
SPECIFICATIONS:
Product: PRR Shops G41A Coil Car
Scale: HO Scale 1:87.1
Truck: Tangent 125-ton ASF Roller Bearing Trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 38in Wheels
N Scale 1978 Ford Fairmount Sedan - Medium Blue
Features:
Side view mirrors
Head and tail light glazing
Interior detail
Simulated rubber tires
Under carriage detail
N Scale Alco RS2 - DCC Factory-Installed Decoder - Canadian Pacific #8402
MODEL FEATURES:
Slow Speed Motor
Golden-White LED s
Directional lighting
Dual brass flywheels
Low-friction mechanism
Dynamic brakes
Factory-installed AccuMate magnetic knuckle couplers
Accurate painting and lettering
Product Information
This detailed Atlas Master Silver N Scale Alco RS2 diesel is a replica of the American Locomotive Companys versatile four-axle rod switcher introduced in late 1946. The successor to the popular RS1, the RS2 featured a rounded carbody, a cabside fuel filler cap and many upgrades. The most notable feature was its new 244 prime mover, which increased the horsepower to 1,500, a 500hp upgrade over the RS1. With the added horsepower, the RS2 was received well by railroads and just over 370 were constructed for the U.S. and Canada. They were used on general merchandise freight, coal trains coming back from the tipple and some were used in passenger service. This N Scale Alco RS2 features a slow-speed motor with dual flywheels, low-friction mechanism, directional golden-white LED lighting, a light board thats easily changed replaced with DCC decoder when you are ready, accurate decoration and AccuMate(R) magnetic knuckle couplers.
HO SD70 - DCC & Sound - Norfolk Southern/Horse head #2536
Detailed Information
NS FEATURES:
First time in NS -Horsehead- scheme
Units repainted by NS at various locations and times; each road number features unique decoration
Nathan K5LAR24 horn
NS-retrofitted toilet hatch & drain
Customer-installed spare knuckle brackets included
Large front plow
Air Conditioner
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Auto-Max Carrier - WRWK #68155
Era: 2016+
MODEL FEATURES:
- Separately applied ladders, brake rigging, stirrups, and handbrake details
- Simulated corrugated roof
- Full articulation with flexible diaphragm
- Safety striping
- 70-ton roller bearing trucks
- 33 inch machined metal wheels with RP25 contours
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
In 1999, Gunderson began production of the Auto-Max articulated auto rack car. This unique car can carry 22 SUVs on three sets of internal ramps. Measuring over 140 feet long and 20 feet tall from the railhead, the Auto-Max pushes the operational and clearance limits of the railroad industry.
N Scale NSC 64 Ft 6000 Cubic Gondola HS - MWCX #102874
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Microtrains Style Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Wheels with appropriate Bremco or Timken where appropriate
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - WINX #00064
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Northern-Light-and-Power-Powerhouse
Kit - 6-5/8 x 4-1/8inch 17 x 10.5cm
Generate new traffic for your railroad! A great destination for unit coal trains, this powerhouse makes a great stand-alone industry. Its also typical of generating stations run by industries and institutions.
HO SD70ACU - DCC & Sound - Progress Rail Leasing (PRLX) #7271
ETA: October 2023
Detailed Information:
PRLX FEATURES:
Nathan 5-chime horn
Large plow
Alternating flash ditch lights on both ends (Function in DCC)
In mid-2022, Progress Rail purchased a batch of ex-NS SD70ACUs. Some of them had a red -PRLX- hand-written over the old logo, and some others
were simply patched out completely as depicted in our models.
ROAD NUMBER SPECIFIC FEATURES:
#7271 Ex-NS patched to PRLX, originally UP. Forward light grey/primer radiator fan, slightly faded body
#7330 Ex-NS patched to PRLX, originally CIT. Full white upper cab -brow-, slightly faded body
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SD70ACU SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated number boards
See-through air intakes
Minimum radius: 18inch - Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Animated Roller Bearing Trucks
Coupler cut levers
Flexible MU hoses
Flexible trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
Lift rings
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin
NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes,
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Walthers SceneMaster 6050 HO Beef Cattle (16 pk)
Bring your HO farm scenes to life in minutes with this ready-to-use figure set! Molded in realistic poses
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Norfolk & Western Rack & Flatcar #412042
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
HO Scale - 1937 Studebaker Railway Express Agency Delivery Truck - Unpainted and Resin Cast Kit
HO Class D10k 4-6-0 - DC/Silent - Canadian Pacific #1078
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
HO SD60M Tri-Clops - DCC Ready - Hudson Bay Railway HBRY #6001
Detailed Information
HBRY FEATURES:
Ex-UP
Illuminated front number boards
Front ditch lights
Late notched nose
The Hudson Bay Railway is a Canadian short line formed in 1997 operating between Saskatchewan and Manitoba. It operates over 810 miles of former CN trackage. Recently, HBRY have been upgrading their locomotive fleet with ex UP SD60Ms painted into this beautiful blue and grey scheme.
ROAD NUMBER SPECIFIC FEATURES:
#6001
PTC antenna array
large UP plow
#6007
Firecracker antenna
large EMD plow
SD60M -TRI-CLOPS- SERIES LOCOMOTIVE FEATURES:
Coupler cut levers
Flexible Trainline and MU hoses
MU stands
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sanding lines
Lit number boards
Lit class lights, if equipped
Lit signal lights and/or beacons, if equipped
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
EMD HTC trucks with animated bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Accurately painted and printed paint schemes
Packaging securely holds for the model for safe storage
Minimum radius: 18inch Recommended radius 22inch
HO Valley Cement Plant - Kit
Product Information
The Walthers Cornerstone Valley Cement kit gives you the structures you need to add a realistic cement factory to your HO Scale steam- or diesel-era layout. Cement is one of the most popular of all building materials. Modern cement is made in special plants consisting of several buildings, each handling a step in the manufacturing process. Various raw materials arrive by rail and are kept under cover in the material storage building. Next, a conveyor moves these materials to the kiln building, where they are mixed in measured amounts. They are then fed into a rotary kiln, where heat starts a series of chemical reactions, and the rotation causes the heated material to form into small chunks. These pieces are fed into a crusher and ground into powder, which is stored for bulk shipment by road or rail. Valley Cement includes a beefy bulk material storage building, corrugated-metal processing structures, concrete silos with an attached hopper car loading facility, a tall smokestack and covered conveyors. Best of all, the rotary kiln connecting the processing buildings is easily motorized using the Walthers Motorizing Kit, 933-1050 (sold separately). This long, rotating cylindrical kiln will add motion and authenticity to your cement factory complex. Valley Cement is a great destination for Walthers ready-to-run covered hoppers and open-top coal and aggregate hoppers.
The complex as shown measures 40-1/2 x 23-1/4 x 11.5inch (102.8 x 59 x 29.2cm)
Valley Cement is just one of a wide variety of Cornerstone industrial buildings.
Four structures
Great for diesel-era scenes
Rotary kiln easily motorized with Motorizing Kit 933-1050
Realistic conveyors
Molded in appropriate colors
Easy-to-build plastic kit
HO - Siemens ACS-64 - DCC & Sound - Amtrak #619
Features:
DCC sound-equipped ACS-64 includes a TCS WOWSound CD-Quality 16-bit 44,100Hz decoder with Audio Assist
Sounds package includes: horn, bell, cooling fan/power inverter, pantograph extension and retraction, coupler close/release, brake release and application, momentum, crew alert, grade crossing quill, departing and arriving station announcements, and more
Keep-Alive device for uninterrupted operation, even over dirty track and remappable light functions, die-cast frame, and selector switch for choice between rail and pantograph operation.
Performs best on 22inch radius curves or greater
HO Scale 1:87
Product Measurements: L 9.5 in., W 1.5 in., H 2 in.
Retail Package Measurements: L 12.5 in., W 2 in., H 3.5 in.
HO PS-2 2893 3-Bay Covered Hopper - Chessie C&O #2063
MODEL FEATURES:
Separately applied round roof hatches
Photo-etched metal roof walk
Factory applied wire grab irons
Detailed outlets
Separate brake cylinder, valve, and air reservoir with wire brake plumbing
Weighted for optimum performance
33inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
Coupler lift bars, trainline hoses, brake hoses, and hardware
Body-mounted, McHenry scale knuckle couplers
Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
Machined metal wheels with RP25 contours operate on all popular brands of track
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Minimum radius: 18inch
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
HO 57ft Trinity 4750 3-Bay Covered Hopper - CSX #259389
FEATURES:
- One-time run of these roadnumbers, order now - limited quantity available!
- Prototypes introduced in 1990 - thousands still in service today
- Clerestory-style roof
- Late Trinity-style jacking pads and pulling tabs
- 1990s-era square cornered roof hatches
- Detailed hopper gates with vibrator brackets & outlets
- Perfect for serving Cornerstone(R) grain elevators, sold separately
- 100-ton trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Couples In Coats
Scenic Accents are colorful, action-packed HO scale figures that are superbly painted to capture the finest detail. There are over 144 different people and animals in all. Human figures include professional people, travelers, shoppers, walking, talking, running and sitting people. Four sets of animals include cats, dogs, horses, cows and sheep in various sizes, shapes and colors. Their fine features add the realism needed to bring any layout to life. Scenic Accents set the scene
Woodland Scenics Figures HO Goodbye People
Scene Master Hi Cube Refrigerator Container Evergreen
Prototypes in domestic service 1986 to late 2000s
Perfect load for new Walthers Proto Gunderson As-Built All-Purpose 48 Foot Well Cars (sold separately)
Based on common size and style
Improved door latch detail
Realistic loads for any well car
Clump Foliage - Light Green - Bag (57.7 in3)
Mix and match with other foliage to model medium to high ground covers, create variation in trees, shrubs and bushes and to landscape hillsides. Available in five colors and a fall mix. Use for all scales. Colorfast and blends naturally with other foliage. Attach to Tree Armatures with Hob-e-Tac. Attach to layout with Scenic Glue.
Van Hobbies - HO Brass CPR GP9 Chopnose Painted #1592
Display picture is accurate to the item being sold.
Pre-owned, but in great condition!
Comes in the original Box!
This brass unit has been painted to match the #1200 CPR Scheme
Please note that this item is final sale.
No refunds or exchanges.
1:87 Greyhound Canada Tribute Set (5 Different Schemes)
LIMITED EDITION!!
HO H21A 4-Bay Hopper - K Brakes - Pennsylvania (PRR Red, Circle Keystone) #175008
1930+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO ET44 Tier 4 - DCC Equipped - Kansas City Southern #5007
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO 36ft Old-Time Wood Boxcar - Cotton Belt #16796
Kadee 400 Metal Roundhead Screws 24pcs
0-48 by 1/8 inch
Plastruct ABS I Beam 1/4
Height: 1/4 (1.6mm)
Width: 1/8(3.2mm)
Thickness: .050 (1.3mm)
Length: 24 (600mm)
HO H21A 4-Bay Hopper - Pennsylvania (PRR Black, Plain Keystone) #695401
1961+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Dash 8-40CM - DCC & Sound - Canadian National: Stripes #2401
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
Metrolink #859
Teal Ribbon Repaint
Model Features:
•Scaled from field measurements & diagrams of a GO F59PH
•End metal handrails with plastic stanchions
•Incredible underframe details including traction motor cables and other piping, and a ridiculous number of separately applied parts
•All-metal etched grilles
•Full cab interior
•Heavy, die-cast chassis with Rapidos NEW coreless motor with dual flywheels and silky-smooth drive
•Operating headlights, rear light, and ditch lights
•GO units feature functioning tri-color class lights (white, green and red)
•American units feature functioning red marker lights
•Accurate sounds recorded from a GM 12-710G3A
•DCC/Sound units come equipped with an ESU LokSound decoder
Plastic Sunshades - Diesel F & E Units - pkg(4)
N Procor 5820 Covered Hopper - UNPX - Procor Blue Stencil #122110
The Rapido Trains N scale Procor 5820 cu ft Covered Hopper features:
Three styles of roof hatches: round, round with ribs and 20 inch vented cover
Two styles of outlet gates: pneumatic and Miner
Etched walkways
Spare hatches included in polybag to let modeler modify for different era
Full end cage details
Accurate paint and lettering
Multiple road numbers available for each scheme
HO 85Ft General American G85 Flatcar - GTTX (Brown) #300330
Product Information
WalthersMainline 85Ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40Ft, 45Ft and 48Ft trailers and 20Ft and 40Ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s. This HO Scale model is available in five different body configurations as appropriate for each roadname and era, with trailer hitches for piggyback TOFC or container pedestals for COFC service as appropriate. The 85Ft General American G85 Flatcar comes fully weighted for great performance loaded or empty, features underbody details with brake gear and is equipped with 70-ton roller bearing trucks, 33inch RP-25 turned-metal wheels and Proto MAX(TM) metal knuckle couplers.
One time run of these road numbers, order now - limited quantity available!
Prototypes handled trailers and containers from 1961 to the late 2000s
Several different size nameplates to match prototype cars
Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
Heavy die-cast metal center sill for excellent performance empty or loaded
Detailed underbody with brake gear
70-Ton roller bearing trucks
Correct 33inch RP-25 turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
PLEASE NOTE: Recommended minimum radius 24inch
Spray Can - Dark Earth (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
The AS line-up of spray paints are specifically developed to provide the subtle shades necessary for finishing both historical and modern aircraft models. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/48 scale sized plastic aircraft models or one 1/32 model. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
AK Interactive - FAQ 2 AFV Painting Techniques Book - 5th Edition
N Scale GSI 48Ft Bulkhead Flat Car - BC Rail #51701
Features:
Die-cast body
Detailed deck
Detailed bulkhead lattices
Read-to-run
Superb paint & Lettering
HO GP9RM Mother & Slug - DCC & Sound - Canadian National (Early) #7240, 241
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
The GP9RM Slug features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks with outside brake shoes or Flexicoil trucks
Traction motor details on gearbox
Detailed walkway tread
Metal side handrails
Footboard pilots or curved plate pilots on appropriate road numbers
Working head lights
Both models are available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
HO International Wide-Vision Caboose - Northern Pacific (1969) #10409
(Delivery 1969 w/ Pyle Lanterns)
Product: BN International Wide-vision Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber or Gould Caboose Roller Bearing with separate brake beam part as appropriate for each paint scheme
Wheels: CNC-Machined 33 inch Wheels
DC/DCC Lighting Features: Interior Lighting as well as lighted FRA Steady Red Lights
HO PTC Antenna for EMD (1/pk)
Weathering Powder 1oz (29.6ml) - Dusty Brown
1952 Ford/Cab Over Engine/Highway Tractor - Unpainted and Resin Cast Kit
N Procor 5820 Covered Hopper - UNPX - Procor W/ BF Goodrich #122157
The Rapido Trains N scale Procor 5820 cu ft Covered Hopper features:
Three styles of roof hatches: round, round with ribs and 20 inch vented cover
Two styles of outlet gates: pneumatic and Miner
Etched walkways
Spare hatches included in polybag to let modeler modify for different era
Full end cage details
Accurate paint and lettering
Multiple road numbers available for each scheme
N Built Ups Sunny Days Trailer
HO PS-2-4427 High Side Covered Hopper - TLDX Delivery Pillsbury 3-1967 #6771
Product: Pullman-Standard PS-2CD 4427 High Side Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with rotating Timken bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
TLDX Delivery Pillsbury 3-1967 shows a very highly-requested private lessee delivery scheme for the Pullman-Standard 4427. The model you already have of this TLDX car is kind of close, but isnt quite right! The Pillsbury billboard lettering fills the side of the car, from the large outlined letters to the round Pillsbury logo mounted on a square placard. What a classic. This car features all the Pillsbury phase details, including center sill supports between the bays, solid end running board supports, Miner gravity gates and ribbed-style roof hatches. The model is equipped with 100-ton Barber S-2 trucks with separately applied brake beams along with rotating Timken caps. This is a big lease scheme.
HO SP C-40-3 Steel Cupola Caboose - Southern Pacific (Gothic Large Modernized) #1112
1955+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
N Scale 60ft Coach Car - Wabash #1405
FEATURES:
- Based upon C&NW and CNJ prototypes
- Full scale dimensions and details
- All cars include separately applied window glazing, diaphragms and roof vents
- Observation car includes separately applied end railing details and a drumhead
- Detailed interiors (excluding baggage car)
- AccuMate operating knuckle couplers
HO Dash 8-40CM - DCC Ready - Quebec North Shore & Labrador: QNSL #401
Our HO Scale Dash 8-40CM Model Features:
Accurately scaled from prototype blueprints
Roadname-specific details including bell position, single or double rear headlights, with or without battery boxes behind cab, horns, CN or BCOL style ditch lights and more!
An insane amount of detail with air filters, many separate pipes and moulded traction motor cabling and air/control pipe runs.
Optional split cooling radiator for CN versions. (Polybag Kit)
Heavy, die-cast chassis with a powerful motor and dual flywheels
Etched metal, see-through steps
Operating headlights, ditch lights and rear lights
Operating factory-installed rock lights on BCOL locomotives
Operational white class lights
Operational sidestep lights, with track lights
Newly tooled accurate cab interior
Newly tooled fuel tank and trucks
Separate grab irons and handrails installed at the factory
DC/Silent (DCC Ready) or DC/DCC/Sound
(ESU LokSound) with twin sugar cube speakers
Factory-installed couplers mounted at the correct height
HO EMD SD9 - DCC & Sound - Chicago & North Western #6614
Chicago & North Western
- Rebuilt at the Oelwein Shops with chopped down nose - a first in HO Scale!
- Modified panels on side sills of locomotive
- Modified/plated over details of dynamic brake blister (Smooth plating over where grilles once were)
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
Woodland Scenics Figures HO Campers - Scenic Accents(R) -- With Tent & Accessories
All Scale Just Plug - LED Floodlight (2/pk)
Just Plug LED Landscape Lights shed some light on important features on your layout. Use Floodlights to cast a broad beam of light for illuminating buildings, landmarks and other large areas.
Just Plug Floodlights include two lights per package. They are designed and ready to plug into one port on the Just Plug Light Hub. Just Plug and you are done!
Dimensions: 6.1 mm W x 15 mm L (0.24 in x 0.59 in)
Wire Length - 36 in (91.4 cm)
Kit includes:
2 LED Floodlights with wire
1 Linker Plug
HO RTR 60Ft Pullman-Standard Bulkhead Flatcar (48Ft IL) - BNSF #545104
Product Information
Protect loads in transit on your HO line aboard the WalthersMainline 60Ft Pullman-Standard Bulkhead Flatcar. Designed to reduce damage to loads caused by end-to-end shifting, low-profile bulkheads were installed during 1968, giving the cars a unique appearance. Features of the models include:
One time run of these roadnumbers, order now - limited quantity available
Correct 8Ft 6inch tall bulkheads with bolt attachment details
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller-bearing trucks
Correct 33inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Flowers by Terry - Kit
Product Information
Flowers by Terry is part of the selection of Walthers Cornerstone brick storefront building kits patterned after those youll find in towns across the continent. Main Street hasnt changed much over the years and brick structures like this florists shop are built to last. Buildings tell a lot about your layout, especially in a business district adorned with colorful signs that set the time and place. Flowers by Terry combines a business on the first floor and apartments or offices on the second and third floors - typical of buildings constructed in the late 1800s through the 1930s and still in use today. Personalize your model with paint from your dealer, and add the finishing touch with the colorful signs in this easy-to-build kit.
The finished kit measures: 3 x 4 x 4-3/8inch (7.6 x 10.2 x 11.1cm)
See other Cornerstone HO business buildings here.
Three story brick corner structure
Fits 1880s to present
Perfect for small town or big city
Use with Cornerstone Merchants Row structures (sold separately) to create a business district
Works with Cornerstone Street System
Colorful printed signs, window treatments and awning
Molded in two colors
Windows and doors molded in place for fast assembly
Double Headed Double Ended Pin Vise
Metal double headed/ended pin vise with double reversible collets at each end.
Collets have four different size openings.
A must have!!
EMD Electrical Air Filter Box
HO Metal Yard Shed - Kit Set of 2 each 3 styles
Prefabricated metal structures have been part of the support facilities at rail yards, intermodal terminals and industrial parks since the 1950s, and the Cornerstone Modern Metal Yard Sheds are typical of smaller buildings, The kit includes a larger shed-office combo perfect for yard office or as a replacement depot, a single car garage and a small storage shed. Parts to build two of each structure are included:
Large Shed / Office
Measures: 2-1/8 x 2-13/16 x 1-1/2in 5.4 x 7.1 x 3.8cm
Single-Car Garage
Measures: 1-21/32 x 2-29/64 x 1-11/32in 4.2 x 6.2 x 3.4cm
Small Storage Shed
Measures: 1-27/64 x 1-45/64 x 1in 3.6 x 4.3 x 2.5cm
HO GMD SD40-2W - DCC & Sound - CNNA (Non Dynamic Map/ Oper. Strobe Lites) #5362
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
HO 60ft NSC 5150 3-Bay Covered Hopper - Archer-Daniels-Midland (ADMX) #52278
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Highly detailed body with raised panel weld seams
- Thin-profile roof-walk, stirrups, end ladders and platforms
- Trough-style roof hatches with handles
- Detailed brake gear and discharge outlets
- 100-ton roller bearing trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO AutoScenes - Ikes Ice Cream Truck
Ike needs only to ring the bell and the kids come running! Truck wheels spin. Set includes 3 children and Ike attached to the exit door of the truck.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
HO Code 100 Insulfrog Large Radius Turnout - Left Hand
If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail allows flange depths up to 1.6mm which means that both vintage and current stock will run happily together.
The wide range of turnouts and crossings in this series includes every type, and the geometry of this range has been cleverly designed to make it easy to build convenient, complex and aesthetically pleasing formations using combinations of small, medium and large radius turnouts and crossings.
Technical Specification:
Length: 258mm
Frog Angle: 12 Degrees
Radius: 1524mm
USE:
SL10 Conducting Rail Joiners: Nickel Silver for PECO Code 100 track
SL11 Insulated Rail Joiners for PECO Code 100 track
SL14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork
HO Scenic Accents - Jug Band (8pcs)
A set of six band members. There is a guitar player, a jug player, a banjo picker, a washboard strummer, a fiddler and a man strumming a wash tub bass!
HO AutoScenes - To the Lake
Lake-goers are loaded up, ready to go with their boat and vintage outboard motor in tow.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
HO RTR 68Ft Railgon Gondola - Canadian Pacific #355017
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
Brass M-5 Air Horn
Details West HO Scale locomotive Air Horns are based on those used on locomotives and cab car rooftops. Available in several designs to match a variety of prototypes, each part is a detailed brass casting.
Limestone Ballast - Matches Unitrack Roadbed - 7oz (200g)
Ballast is made from real pulverized limestone and matches Unitrack System roadbed.
HO Waterslide Decals - Rio Grande, Hood Diesels & Switchers (1962-1984)
Tangent Scale Models HO Greenville 86ft Quad Door Boxcar - PC- Delivery X-60-R 2-1970
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33in Wheels
Release Date: April 2022
Penn Central (PC) -Delivery X-60-R 2-1970- offers another big paint scheme for our customers. A big PC logo dominates the center of these cars, with a stacked Penn Central on the far left. Fans of the Penn Central expect the best from Tangent, and we aim to deliver just that. This 1970-built Greenville group features accurate End-of-Car Cushioning details, Gypsum crossover platforms and truck mounted brake hardware. This X-60-R order rides on 70-Ton Barber S-2 Birdsboro Roller Bearing Trucks, with 33in wheels and accurate rotating Brenco-6 roller bearing caps. These cars were part of the GM Lansing Stamping Plant car pool, with a return-when-empty stencil the GTW in Lansing, Michigan. These beauties are available with eight different road numbers!
HO Just Plug Lighted Vehicle - Station Wagon
The perfect family vehicle, with enough room to store your luggage and still have circulation in your legs all the way to grandmas!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
#1711 Roundhead Stainless Steel Screws 2-56 x 3/4 inch- 12pcs
Steel Mill Ingot Molds - 2 pcs
Molds are also sold separately. Kit includes 2 ingot molds and stools
HO Union Pacific Yard Master - Train Set
The power of a steam engine is guaranteed to be what you need to master any rail yard shunting job with ease. An 0-6-0 locomotive with Union Pacifics distinctive greyhound color scheme and slope tender sends a puff of smoke skyward as it prepares to position rolling stock for pickups, much like a game of strategy. Plan your moves, assemble a consist, and send freight on its way with the Yard Master!
This ready-to-run train set includes:
- Baldwin 0-6-0 steam locomotive with operating headlight, smoke, and slope tender
- gondola
- off-set cupola caboose
- body-mounted E-Z Mate couplers
- 36 inch circle of snap-fit E-Z Track including 11 pieces of curved track and 1 curved plug-in terminal rerailer
power pack and speed controller
- illustrated instruction manual
HO 50ft Ext-Post Hi-Cube Plug Boxcar - CRLE #119719
MODEL FEATURES:
- Separately applied brake wheel and stirrups
- Highly-detailed, injection-molded body
- Metal wheels with RP25 contours operate on all popular brands of track
- Minimum radius: 18 inches
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23001
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Leaf Flakes - Shaker 16oz - Rusty Orange
HO Magor 54Ft Flat Car - DODX - Early Repaint (Era:1975+) #38154
The Rapido Trains HO scale DODX Magor Flatcar features:
FIRST TIME IN PLASTIC!
Drawn from original blueprints, measurements and 3D scans
Fully-detailed underframe including piping and equipment
Correct Buckeye 3-axle trucks with incredible detail
Trucks have friction bearings or retrofitted roller bearings as appropriate
Metal knuckle couplers
Simulated wood deck design
Loads coming soon
HO 50ft NACC Boxcar - Penguin Ginger Ale #7004
MODEL FEATURES:
- Three road numbers
- Applied metal grab irons and etched end platforms
- Pullman Standard or Superior plug doors
- Pullman Standard or Stanray (Superior) roof (to match prototype)
- Ready-To-Roll 70 ton trucks
- Machined 33 inch metal wheels with RP25 contours
- Body mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- Minimum radius: 18 inches
HO GP18 - DCC & Sound - Lehigh Valley #302
Detailed Information
LV FEATURES:
Nathan 3-chime horn
Dynamic brakes
Winterization hatch
Forward facing fuel tank
Pilot mounted footboards
One of the anthracite roads of the northeast U.S., Lehigh Valley bought four GP18s (built in mid-1960) numbered 302-305. The units served throughout the 1960s and into the mid-1970s. Lehigh Valley was folded into the U.S. governments bailout of Penn Central and became a founding member of Conrail in 1976. The collection of four GP18s went on from Lehigh Valley to serve Conrail as 7496-7499. The units initially wore patched out Lehigh Valley dress with -CR- markings and all eventually saw repainting into Conrail blue. Among the four GP18s, 304 was rebuilt with a chopped nose during the time it worked for Lehigh Valley; the other three retained high short hoods.
ROAD NUMBER SPECIFIC FEATURES:
#302
1964 era Tuscan red scheme
#303
1964 era Tuscan red scheme
#305
1971 era Cornell Red scheme with large letters and barrier stripes. Modified -cut- conductors side skirt
Long hood mounted paper air filter box
Flat-top dynamic brake fan
GP18 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
-Nub- style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Accurately-painted and printed paint schemes
Body-mounted McHenry operating scale knuckle couplers
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
SOUND-EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
HO 40Ft Hi-Cube Dry Containers - Orient Overseas Container Line (OOCL) (3pk)
3 pack road numbers include : OOLU 818584/819809/977307
Body: Type A
Door: Type A
Latch: Type A
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - BLUX #1006
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
White River Productions - Railroad Model Craftsman, July 2024 - Magazine
Features:
Expanding St. Nicholas Yard - by JIM HERTZOG - Expanding a key yard facility for more operational enjoyment on this HO Reading layout..
Louisville & Nashville Bulkhead Flatcar - by JAMES KINKAID - A distinct class of 100 70-ton flatcars built by Pullman-Standard for L&N in 1963.
Backdating a Walthers Water Tank - by ROBERT SCHLEICHER - Simple modifications make this HO model fit right into turn-of-the-century layouts.
Weathering a Worn-Out Canadian National GP38-2W - by ANDREW CASTLE - Weathering an Athearn Genesis diesel to represent 40 years of hard service on CN.
Erecting Pennsy-Style Catenary in O Scale - by JOHN SETHIAN - Easy steps to build realistic compound electric catenary for traction layouts.
Departments:
Safety Valve - Letters from our readers
Receiving Yard - New product reports and industry news/compiled by Harry K. Wong
Test Track - In-depth reviews of new hobby products
Rail Books - The MDC Shay Handbook, 3rd Edition/review by Harry K. Wong
Timetable - Listings of railroad-related events contributed by our readers
Perspective - In Praise of Short Lines/Otto M. Vondrak
Boomer Trail - A photo gallery of work submitted by our readers
Branch Line on a Shelf - Electric Substation for The Milan Branch/Scott
Painting & Weathering - Rescuing a Kitten: Chessie System Alco S-4/Mile Callan
Diverging Points - Feed Me!/Jason Shron
Editor's Notebook - Commentary from your editor/Otto M. Vondrak
Dealer Directory - Listing of our favorite recommended hobby dealers
FEATURES:
- One time run of these road numbers, order now - limited quantity available
- Prototypes seen from coast-to-coast 1974 to the present
- Handles all types of general freight loading
- Used by Railbox and dozens of other railroads
Correct Plate B dimensions:
- 41ft 3in Truck Centers
- 15ft 2in Tall
- 10ft 8in Wide
- Fully assembled
- Correct 33in RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO & N Scale TSU-N18 Tsunami2 Sound Decoder for EMD-2 Diesels
Dimensions: 25 x 10.5 x 4.1mm
Max. Motor Stall Current: 1A
Max. Function Current: 100mA (each output)
Function Outputs: 6
Audio Amplifier: 1 Watt, 8-Ohm Load
DCC Track Voltage: 7.5V – 22V
Sound Channels: 16
BIG sound in a small package! The small size of our new Tsunami2 TSU-N18 decoder makes it ideal for both N and small HO models that come equipped with a NEXT18 socket. Installations can not get any easier. Simply plug this decoder in and enjoy all of the Tsunami2 features you know and love!
You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive dynamic digital exhaust, functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. Soundtraxx also offers a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12 in each diesel version), whistles (90), airhorns (40+), couplers, dynamos and more!
The TSU-N18 can be wired to a CurrentKeeper to maintain performance over dirty track and switches.
HO Scale G2 SD90MAC Diesel - DCC & Sound - Norfolk Southern #7287
Detailed Information
NS FEATURES:
Primed for Grime
Patches match prototype deletion of UP reporting marks
Different patch shapes, paint color, & slogans per road number
Former UP units; major spotting details remain the same
EOTD above left rear of fuel tank
This group consisted of 110 second-hand units in total, 100 coming from UP and 10 from CEFX. Purchased with rebuilding into SD70ACus in mind, but were used in service as-is for a time before being rebuilt.
SD90MAC SERIES LOCOMOTIVE FEATURES:
Brand new model previously only available in brass
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
Scaled from prototype resources including drawings, photographs, and more
Coupler cut levers
Rubber MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, and precision machined flywheels
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Warm White
No electrical knowledge or special tools needed, just plug and you are done. The Just Plug(TM) Lighting System is a quick and easy way to add realism and interest to new and existing layouts and other projects. Individual bulb brightness can be controlled, and the modular design allows for easy expansion. Just Plug is compatible with DCC and works for any scale.
Features
2 lights per pack
Includes 24 inches cables
Ready to plug into Light Hub (sold separately)
Adhesive-backed for simple installation
DCC Specialties RRamp Meter V1
- The only inexpensive device that accurately measures DCC Volts/Amps.
- Also measures AC and DC Volts/Amps.
- Costs less than DVMs that cannot measure DCC. Ver II rated at 10 Amps
- Measures true RMS Volts/Amps, +/- 2%.
- Suitable for all scales.
- No batteries required.
- Designed for Left/Right-hand use.
- PCB length 5.63 inches
GMD SD40-2f - DCC Ready - CP Rail (Round Porthole, White Stripe) #9015
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
Plaster Cloth - Narrow Roll (1 roll/pkg - 4 in x 5 yd, 5 ft2)
Narrow Roll - Specially sized for small areas/projects, Risers, Inclines/Declines and Road Riser. Packaged in resealable bag.
Plaster Cloth is the easy, convenient method for modeling lightweight land contours and terrain base. The plaster-coated cloth creates a durable hard shell, designed to accept Earth Colors Liquid Pigment, paints, plaster castings and landscape materials easily, with realistic results. Use to fill seams or gaps around rocks, tunnels, and terrain to blend terrain features.
HO 18 inches Straight Grab Irons (.008inch Formed Wire) - 20pkg
85Ft Budd 10-6 Sleeper UP Heritage Fleet - Ready to Run - Lighted - Union Pacific, Willie James #202
(Armour Yellow, gray, red)
Product Information
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
Perfect for fan trip and excursion service
Modern-Era UP excursion scheme
Factory-Printed Car Names and UPP reporting marks
Factory-installed grab irons
Prototypically accurate window tinting
Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24inch radius is recommended for operation.
Delivered new by Budd in 1950, this car started life as 10-6 sleeper -Pacific Domain.- Used as staff car #202 after 1972, it received the name -Cabarton- in 1980. Remodeled as a crew car with four bedrooms in 1989, it was renamed in early 2009 to honor long-time UP executive chef Willie James. Today, the car serves as a support center for the excursion trains, and includes both a large kitchen and dining/lounge area.
HO Scale - 1937 Studebaker COE Beverage Truck - Unpainted and Resin Cast Kit
HO 53ft Stoughton Containers - Swift, Set #1 (3pk)
MODEL FEATURES:
- Fully assembled
- Easily stackable
- Separately applied door closure rods
- Each container individually numbered
- Razor sharp printing and painting
N Scenic Accents(R) -- Depot Workers & Accessories
Foam Cutter Bow & Guide (Use w/#785-1435, Sold Separately)
This accessory increases the versatility of the Hot Wire Cutter (785-1435, sold separately), allowing cuts in material from 1/4 to 5inch thick or to cut at precise angles
HO 50ft PS 5277 Cu.Ft. Exterior Post Boxcar - CSX #142810
(ex-RF&P)
FEATURES:
- Laser Sharp Painting and Printing
- 33 inch InterMountain Precision Metal Wheelsets
- Kadee #178 Metal Knuckle Couplers
Date: COTS 5-89
Minimum Radius - 22 inches
HO Scale GP38 - DC/DCC Ready - CSX (Grey/ G Scheme) #2039
NOTE:
All artwork is subject to revisions before final production.
That -other- GP38 Locomotive features:
Measured from a living GP38
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with
plastic stanchions
Incredible underframe detail including traction motor cables,
air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, tri-colour class lights AND
ditch lights and beacons (where appropriate).
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells. (ATSF has correct -Switcher-style
steps)
See-through, etched steps
High short hood
Separately applied wire grabs
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches and air filters
And much, much more!
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
The GP38. That -other- Geep youve been waiting for! At long last there is a proto-specific, dynamically detailed, Electro-Motive
General Purpose -38- class locomotive. And it only took 50 years since the last straight 38 rolled out of La Grange, Illinois. This
venerable locomotive packed 2,000 hp, low or high short hoods and paved the way for future -GP- models to follow. 706 of these
four-axle beasts were manufactured at EMDs La Grange Plant, at the heart of railroad world. Of the 706 built, Penn Central, B&O
and Southern were the largest purchasers of this model. Southerns were unique in that they continued an age-old tradition of
ordering high short hoods for added crew safety. Their eye-pleasing black, white and gold striping along with their harmonious
Nathan P horns certainly made them fan favorites.
By the 90s, many GP38s were worn down and ready for a rebuild. Many roads either sold them to leasing companies or elected
to rebuild them to Dash 2 standards, some chopping the high hoods down. With the reduction of many four-axle locomotives on
class one rosters, many of these locomotives can still be found racking up miles on regional roads and shortlines. In fact, even some
tourist and museums have GP38s!
HO Bathtub Coal Gondola - MWCX (ex-CP) #100416
Built: 3-06
-All are Ready-to-Run
-Laser Sharp Painting and Printing
-36inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
-Minimum Radius - 22inch
HO Single BiLevel Commuter Car - CalTrain - Unnumbered Coach
San Francisco - Series 3
Note: Unnumbered coaches do not include decals. Decals are available from highball graphics.
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO Add-on Office/Showroom - Kit
This kit is designed with cut lines on the back side of the walls so that door and window locations are optional. Kit includes doors, windows, outside sign (no shown) and down spouts.
Dimensions: 36 wide x 28 deep scale feet / 5 x 3-7/8 inches.
Assorted Shortlines - Quebec Southern Hood Unit Diesels (1996+)
Detailed Information
MODEL FEATURES:
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
McHenry scale knuckle spring couplers installed
Painted and printed for realistic decoration
Weighted for trouble free operation
33in machined metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
The use of ice to refrigerate and preserve food dates back to prehistoric times. Through the ages, the seasonal harvesting of snow and ice was a regular practice of many cultures. By the turn of the 20th century, manufactured ice became more common. The Pacific Fruit Express (PFE), for example, maintained seven natural harvesting facilities, and operated 18 artificial ice plants. Their largest plant (located in Roseville, California) produced 1,100 tons of ice daily, and Rosevilles docks could accommodate up to 254 cars. At the industry’s peak, 1,200,000 tons of ice was produced for refrigerator car use annually.
A late-19th century wood-bodied reefer required re-icing every 250 miles (400 km) to 400 miles (640 km). The typical ice-bunker reefer from the 1920s were originally constructed with wood sheathing. Later, these early wood constructed cars would be replaced with steel constructed cars with plywood interiors by the 1940s. Vents in the bunker at the end of the car, along with slots in the wood floor racks, allowed cool air to circulate around the contents.
Specifications
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1940 - 1960
Minimum Age Recommendation: 14 years
Is Assembly Required: No
HO GE C30-7 - DCC Ready - Conrail #6603
Rapidos new HO scale C30-7 features:
Correct nose and body contours
High or Low headlights, as appropriate
Correct Rockwell or Adirondack trucks, as appropriate
Full traction motor casings details
Heavy, die-cast weight for heavy hauling
5-pole skew-wound motor with dual flywheels
Operating headlights and rear lights
Operating roof-top beacons and class lights, where applicable
Detailed underbody piping and conduit
Separate grab irons and handrails
Rapido is happy to announce the next in their series of classic General Electric locomotives, the C30-7 in HO scale.
The C30-7 was General Electrics improvement of the U30C locomotive, featuring a 16-cylinder 3,000 horsepower diesel engine. Built between September 1976 and May 1986, over 1100 units were produced for many of the Class I railroads across the United States for use primarily in heavy-haul freight. A fair number would go on to have extended careers with both short/regional lines and private industrial railroads, owing to the locomotives reliability and pulling power.
It is, perhaps, the most polarizing locomotive from the 1980s and early 90s. The C30-7 was GEs answer to the SD40-2. When one thinks of Powder River and coal, the C30-7 isnt far behind. Burlington Northern owned the most in the States, with just over 240 examples. Santa Fe was a distant second with 157 C30s.
The C30-7 later gave way to the similar C36-7, as well as various unique models such as the Conrail C30-7A and the BC Rail C36-8m, rebuilt from former Conrail C30-7s.
Acrylic Flat Colors - Flat Flesh - 3/4oz (23mL) Bottle
XF-15
Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrol resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly and can be blended easily.
When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077
X designated colors have a glossy finish while XF designated colors are flat finish.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Paint Retarder for a smoother brushstroke free finish.
HO EMD SD7 - DC/Silent - Southern Pacific (Black Widow) #5329
Southern Pacific
- Steam generator equipment details on short hood
- Correct Mars style -ash can- light on both ends of the locomotive
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
N Scale - Metal Industrial Fence (Scale Model) - Kit
PLEASE NOTE - This product is a miniature scale model / toy, not an actual fence.
Protect and secure all types of N Scale strutures, animal pens and more with the SceneMaster Metal Industrial Fence kit! Typical of chain-link fencing, the kit includes a fine aluminum mesh screening thats just 0.1mm thick with mesh sized at 1.2mm, perfect for N Scale. Easily customized or combined (additional kits each sold seprately) for a larger areas, the kit features:
Ultra-fine aluminum screening - 23-5/8 x 5/8inch 60cm x 16mm
32 fence posts
HO Scale H1b Hudson Steam - DCC & Sound - Canadian Pacific (Spans the World) #2814
-Late walkway
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO EMD SW9 - DC/ Silent - Generic Industrial Yellow - Unlettered
Photo says: Preliminary artwork and drawings. Subject to changes or revisions before production
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
HO B36-7 - DCC & Sound - Southern Pacific (Speed Lettering) #7758
The B36-7 Locomotive features:
Incredible underframe detail including piping, a ridiculous number of separately-applied parts and full cab interior
Dead straight metal side handrails with plastic stanchions
A crazy level of road-specific detail options, with different pilots, anticlimbers, plows, fuel tanks, air dryers, antennas, wind deflectors, headlight locations, air-conditioning units, different bodies, multiple nose and rear end styles, three versions of drop step and so on...
With or without class lights (as appropriate)
Conrail locomotives come with their unique -red bug eye- marker lights
Equipped with ditch lights - on front and/or rear - as appropriate
ATSF and Southern Pacific locomotives have Stratolite beacons
Three styles of operating, flashing ditch lights, front & rear (as appropriate)
Working headlights in correct location, switchable number boards at both ends and cab interior headlight
Metal Knuckle Couplers
All units come equipped with DCC/ESU LokSound
Spray Can - Aluminum Silver (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 66ft Bulkhead Flatcar - CNIS (Mineral Brown) #621008
FEATURES:
- Three different bulkhead variations
- Laser-cut wood deck (two styles)
- Four different jack pad styles
- Two different end sills
- Etched metal bulkhead end sheet
- Etched metal: deck, tiedown loops and cross over end platform
- Separate grab irons installed at the factory
- 100-ton Barber S-2-c trucks, with metal wheels
- Rapido metal knuckle couplers
Stack Only - Brass - 1pcs
N Scale NSC 64 Ft 6000 Cubic Gondola HS - AIMX (6 pkg) #2
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 6000 Gondola is used scrap and metal industries. Between scrap yards, resellers and steel plants. Cars can be seen found all over North America in either unit train or manifest train service.
Includes Road Numbers:
20001
20016
20084
20128
20186
20210
Era - Post 2018
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
HO RJ Frost Ice & Storage - Kit
Product Information
Next time youre in the grocery store, look at the incredible variety of fresh and frozen foods available. Most of them were grown and processed in another area, then shipped to facilities like the prototypes of Walthers Cornerstone RJ Frost Ice and Storage. Along they way, they spent some of their rail and truck journey in a cold storage plant. These buildings are commonly found in agricultural areas where foods are readied for shipment, and in large cities where the food is stored for pickup by local customers. This kit captures the look and feel of a large cold storage warehouse in a size that fits most layouts. The kit includes concrete walls, truck and railcar docks with canopies and a large rooftop cooling tower. Itll look great along your railroads industrial trackage or in small towns where multiple packing houses process perishables for shipment. As shown RJ Frost Ice and Storage measures: 11 x 11inch (28 x 28cm.)
RJ Frost Ice & Storage is just one of a wide variety of Cornerstone HO Scale industrial buildings.
Realistic concrete construction
Truck and railcar loading docks with canopies
Fits steam or diesel era
Great origin or destination for reefers and insulated boxcars
Realistic decals
Easy-to-build plastic kit
HO Kenworth T680 Sleeper Cab Tractor w/Moving Van Trailer - Wheaton
(white, black, maroon)
HO Single BiLevel Commuter Car - GO Transit (Late Scheme) - Unnumbered Coach
Toronto - Series 4
Note: Unnumbered coaches do not include decals. Decals are available from highball graphics.
The Rapido Bilevel Commuter Car features:
Accurate body shell designs with or without rivet details
Five windows or four windows on the lower level, as appropriate
Free-rolling, highly-detailed inside-bearing trucks with roller-bearing axles and metal wheelsets
Minimum 22inch radius curves
Full underbody and unrivaled interior detail
Accurate painting and lettering, both inside and out
Tinted windows
Metal side grab irons
Constant interior lighting in DC and DCC
Controllable cab car lighting in both DC and DCC
Cab cars pre-wired with a speaker and a 21-pin socket for full DCC/Sound functionality
HO GMD SD40-2f - DCC Ready - Canadian Pacific: Beaver Logo #9010
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
Detailed Information 3 Pack of 3 different road numbers
MODEL FEATURES:
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
McHenry scale knuckle spring couplers installed
Painted and printed for realistic decoration
Weighted for trouble free operation
33in machined metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
The use of ice to refrigerate and preserve food dates back to prehistoric times. Through the ages, the seasonal harvesting of snow and ice was a regular practice of many cultures. By the turn of the 20th century, manufactured ice became more common. The Pacific Fruit Express (PFE), for example, maintained seven natural harvesting facilities, and operated 18 artificial ice plants. Their largest plant (located in Roseville, California) produced 1,100 tons of ice daily, and Rosevilles docks could accommodate up to 254 cars. At the industry’s peak, 1,200,000 tons of ice was produced for refrigerator car use annually.
A late-19th century wood-bodied reefer required re-icing every 250 miles (400 km) to 400 miles (640 km). The typical ice-bunker reefer from the 1920s were originally constructed with wood sheathing. Later, these early wood constructed cars would be replaced with steel constructed cars with plywood interiors by the 1940s. Vents in the bunker at the end of the car, along with slots in the wood floor racks, allowed cool air to circulate around the contents.
Specifications
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1940 - 1960
Minimum Age Recommendation: 14 years
Is Assembly Required: No
N Scale RTL Turboliner - DCC & Sound - Amtrak (Phase III Late) Set #2
Road Numbers:
152, 173, 174, 175, 153
The Rapido N Scale Rohr Turboliner features:
Accurately designed using original blueprints and field measurements
Tinted windows, interior details and flicker-free interior lighting
Separate factory installed grab irons
Highly-detailed trucks including third-rail shoes
Working headlights, marker lights and cab-mounted strobe lights
Both Power Cars come with smooth, reliable drive systems for optimal performance
DCC models feature ESU sound decoders in each power car with accurate sounds sourced and remastered from original videos
All wheel electrical pickup. Yes, we mean every ... single ... wheel!
Rapido Trains Inc. is pleased to bring speed to the rails with the Amtrak Rohr Turboliner in N Scale!
In the early days of Amtrak, efforts were made to improve passenger services along key corridors. Following the success of the French-built RTG Turboliners in the mid-1970s in the Midwest, Amtrak turned to Rohr Industries in California to build modernized Turboliners for use along the Empire Corridor.
Entering service starting in September 1976, these new RTL Turboliners quickly proved their value, bringing passengers back to the rails. Equipped with third-rail shoes, they operated on electric power through New Yorks Grand Central Terminal (and later Penn Station), switching to gas-turbine power once out of New York City. Painted in Amtraks stunning red, white and blue Phase III paint scheme, they operated on most Empire Corridor services, as well as regular appearances on the Adirondack to and from Montreal in the early years. Occasional equipment needs even put the Turbos on other rare adventures outside their normal call of duty, including the Niagara Rainbow to Detroit via Southwestern Ontario, and the Maple Leaf to Toronto via Niagara Falls.
After nearly 20 years of service under their belts, Amtrak selected one RTL set in 1994 to be rebuilt into what would be called the RTL-II, incorporating several improvements including new turbines, a remodelled interior, a striking new demonstrator paint scheme, in addition to extending the lifespan of the set for several more years. While this set continued in service until 2003, no other RTL-II sets were ever commissioned.
Further redevelopments and improvements of the fleet into the RTL-IIIs was never fully realized, and all were retired from active service in 2004. Conventional equipment has since been utilized on the Empire Corridor services in place of the once mighty Turboliners.
HO Auto-Max Carrier - AOK #501533
Era: 1999+
MODEL FEATURES:
- Separately applied ladders, brake rigging, stirrups, and handbrake details
- Simulated corrugated roof
- Full articulation with flexible diaphragm
- Safety striping
- 70-ton roller bearing trucks
- 33 inch machined metal wheels with RP25 contours
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
In 1999, Gunderson began production of the Auto-Max articulated auto rack car. This unique car can carry 22 SUVs on three sets of internal ramps. Measuring over 140 feet long and 20 feet tall from the railhead, the Auto-Max pushes the operational and clearance limits of the railroad industry.
Earth Color Liquid Pigment - 4 Ounce Bottle-Stone Gray
This is an amazingly simple system for coloring terrain and plaster castings such as rocks, retaining walls, culverts and tunnel portals. Beginners get craftsman-quality results. The Earth Colors Liquid Pigment Concrete.Use to stain rocks, plaster castings and terrain. Water soluble colors can be diluted and blended in endless combinations to model a variety of scenic effects. Extremely concentrated for economical use, each bottle includes four ounces of liquid pigment. (Photo shows plaster rock casting, sold separately, stained with this color.)
Bowser 1290 HO Speaker Enclosure for 2 Sugar Cube Speaker Boxes
691-1290
Speaker Enclosure for 2 sugar cube speakers.
Box may be glued together or screwed together.
Speakers and screws not included.
16.4mm x 35.25mm x 9.5mm
4 mounting holes for 2mm screws
RTR 53Ft Jindo Container, UPSU (3pkg)
Era: 2007+
Primed For Grime
MODEL FEATURES:
Fully assembled
Newest vertical rib front
Easily stackable
Separately applied door closure rods
Each container individually numbered
Razor sharp printing and painting
HO 53ft Railgon Gondola - Railgon GONX #310144
(as-built; black, yellow)
A must-have model for any HO layout from the 1980s to the present, the Walthers Mainline 53ft Railgon Gondola will look great serving steel mills and other trackside customers! An outgrowth of its successful Railbox program, Trailer-Train designed and built the new 53ft gondolas especially for the demands of the steel industry, and the cars traveled all across North America.
A great addition to your HO freight car fleet, the models feature:
-Based on Railgon 310000 series cars
-Used in nationwide pool service from 1980 to the present - many later leased and re-lettered by new operators
-Prototypes built tough for handling scrap, pipe, beams and similar large bulk loads
-100-ton roller-bearing trucks
-Correct 36in turned metal wheelsets
-Proto MAX(TM) metal knuckle couplers
SD70MAC Diesel, DCC/ Ready - PRLX #9562
Era: 1994+
Primed For Grime
EMD SD70MAC WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
First time ever with front and rear Rubber MU hoses, Trainline hoses, Cut levers, and rear Spare
PRLX FEATURES:
Progress Rail ended up with quite a few ex BNSF units when their lease expired. While roaming the whole system, they were picked up by NS and CSX as extra lease power and can been still seen operating today.
LOCOMOTIVE FEATURES:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PROTOTYPE SPECIFIC INFORMATION
During the early-1990s, EMD teamed-up with German engineering company Siemens to produce a freight locomotive that was capable of providing AC-traction drive currents, and thus providing a high-horsepower rating and lower fuel consumption for railroads which had an ever-increasing demand for saving fuel consumption by using a lesser amount of units to haul most of their trains.
The EMD SD70MAC was first introduced in early 1993, and began production later-on during the same year after numerous tests and improvements were made. Since then, the EMD SD70MAC has been a staple of heavy freight lines across the country.
HO USRA Single-Sheathed Boxcar: NYC
Rapidos HO USRA Single-Sheathed Boxcar Features:
Accurate new tooling
Murphy 7-8 corrugated ends
KC or AB brakes as appropriate
Full underbody with separate brake rods and piping
Ajax power hand brake
Unique CP details
Accurate decoration
Fully decorated and assembled
Factory-installed Rapido semi-scale couplers
USRA Andrews trucks with in-line brake shoes
Blackened turned-metal wheels
HO 53ft Jindo Container - EMP ex-HUB Set #2 (3pk)
(#200413, 200427, 200475) (ORANGE/YELLOW)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting
HO RTR ACF 4650 3-Bay Hopper - Norfolk Southern #251064
Date: 8-92
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
Spray Can - German Gray (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 40Ft Hi-Cube Dry Containers - Hapag-Lloyd (Small Logo) (3pk)
3 pack road numbers include : HLXU 805919/806345/808871
Body: Type D
Door: Type A
Latch: Type A
Key Product Features:
Accurate dimensions per prototype measurements
Painted & detailed interior features
Operating doors can be positioned to model loading/unloading scenes
Road-specific body variations - 4 body variants in total
Road-specific door variations - 3 door variants in total
Road-specific lock/latch variations - 5 variants in total
Correct number and position of vents per prototype
True-to-scale corner fitting details
Twistlocks included to stack multiple containers for yard display or on rolling stock
The Aurora Miniatures HO Scale 40Ft Hi-Cube ISO Dry Container (45G1) was originally conceived in 2017. It was designed and manufactured exclusively by Aurora and sold bundled with various intermodal rolling stock models of our business partners in Asia and Europe. It received critical acclaim from hobbyists around the world as it was the first HO scale container model with real emphasis on road/company-specific details, along with extra features that make the model come to life, such as operating doors.
Aurora Miniatures is now proud to offer these exquisite containers as stand-alone 3-pack bundles for the North American market, with more paint schemes and container numbers than ever before.
HO 5820 Covered Hopper - Procor/UNPX (Low Black Solid) #122776
Era: 1990s+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
RTR 57Ft trinity 3-unit Spine Car - TTRX #361044
Expected time of arrival : April 2021
MODEL FEATURES:
Decorated models fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Precision die-cast metal spine structure
Etched metal walkways
Separately applied brake piping
Highly detailed customer applied trailer hitches
53Ft trailer and container are perfect loads for the 57Ft spine car
Fine ladder detail
Weighted for optimal performance
33Inch solid nickel silver wheels with RP25 contours operate on all popular brands of track
McHenry scale knuckle spring couplers installed
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Machined metal wheels
Minimum radius: 20Inch
PROTOTYPE AND BACKGROUND INFO:
Intermodal transportation requires specialized rail equipment which is, on occasion, too specialized. To allow more flexibility in loading containers and trailers at terminals all-purpose spine cars were developed. These cars can be configured to allow loading of trailers of varying lengths, from 28Ft pups to 53Ft high capacity units. With the trailer hitches collapsed containers can also be loaded. 40Ft, 45Ft 48Ft and 53Ft containers call all be accommodated on these cars as well as 20Ft models provided they are mounted to a chassis.
The prototype for our model is based on a Trinity-built car owned by the TTX Company. These 70-ton cars (TTX class RAF30A) numbered TTRX 360817-361116 first appeared on the rails in the late 1990s. The Athearn model is faithful to the prototype allowing modelers to load a variety of trailers and containers.
Specifications
PROTOTYPE MANUFACTURER: Trinity
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990s+
60Ft PS-1 Boxcar - Grand Trunk Western - BCR #383516
Beginning in the 1960s, automakers approached rail carriers with the desire for larger freight cars to transport auto parts from suppliers to manufacturing centers. In response, the 60Ft auto parts boxcar was introduced. Carrying a wide variety of auto components including engine blocks, transmissions, brake drums, and others, these cars were a fixture throughout North America for the next four decades and can still be found in service today. Often times, entire trains of auto parts and related cars could be seen near major production facilities as automakers switched to just-in-time delivery methods, requiring prompt deliveries from the railroads providing service. It was common to see trains consisting of 50Ft, 60Ft, and 86Ft boxcars, specially modified flat cars to carry lightweight chassis, and autoracks all destined for one auto or truck manufacturing facility. As the auto industry supply chains evolved and manufacturing facilities were consolidated, many of the 60Ft boxcars were used in other markets and could be found hauling a variety of goods including appliances, paper goods, cardboard, and similar items.
HO RTR 45Ft Fruehauf Z-Van Trailer - Southern Pacific #250068
Detailed Information
MODEL FEATURES:
Separately applied mud flaps
Rubber tires
Fully-assembled and ready to use out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
HO TM High-Cube Container - OVAU, Set #1
Contains Numbers: 60153, 60594, 60643, 60852
MASTER MODEL FEATURES:
Prototypical paint schemes
Simulated forklift pockets
Detailed chain securement
Fire port on one side
Enamel Product.
This enamel wash is specially designed to bring out the detail of the wooden covers typical of many warships. It can also be easily used for any other wooden subject.
Just shake well before use and you can apply it directly to your model to create contrast and depth in the details. Remove excess with a clean brush moist in Enamel Thinner. This is an enamel product and can by dissolved using our White Spirit or Odourless Turpentine.
The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - AIMX #23048
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
Stainless Steel Rolled Foil - 0.002 Thick x 12 inch Wide x 30 inch Long
-1 Roll
N Procor 5820 Covered Hopper - UNPX - Procor Blue Solid #122736
The Rapido Trains N scale Procor 5820 cu ft Covered Hopper features:
Three styles of roof hatches: round, round with ribs and 20 inch vented cover
Two styles of outlet gates: pneumatic and Miner
Etched walkways
Spare hatches included in polybag to let modeler modify for different era
Full end cage details
Accurate paint and lettering
Multiple road numbers available for each scheme
60ft Pullman-Standard Flatcar - Ready to Run -- BNSF Railway
The WalthersMainline 60ft Pullman-Standard Flatcar is perfect for all kinds of jobs on your 1960s and later HO Scale layout. Based on over 4,000 cars constructed by P-S beginning in the mid-1960s, many are still in service today. Over their careers these cars have hauled everything from logs to intermodal trailers and containers. These cars are available in various configurations and feature superbly detailed decks with the correct board pattern, realistic wood grain and bolt details. The 60ft Pullman-Standard General Service Flatcars are heavily weighted and come equipped with 33in turned-metal wheels and Proto MAX(TM) metal knuckle couplers for superior performance loaded or empty.
One time run of these road numbers, order now - limited quantity available!
Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20ft and 40ft containers, and 45ft or 48ft trailers
Superbly detailed decks match different prototype configurations
Correct board pattern with realistic wood grain and bolt details
Brake wheel cutout as appropriate
Heavily weighted for excellent performance loaded or empty
Detailed brake gear with piping
70-ton roller bearing trucks
Correct 33in turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO Alphabets - Extended Railroad Roman - White - Waterslide Decals
Peco SL 111 Nylon Insulating Rail Joiners HO Scale - Code 70, Code 75, Code 83
New part number for SL8311 for Code 83 Nylon Insulating Rail Joiners HO Scale
12 pc package
HO 57ft Trinity 4750 3-Bay Covered Hopper - CSX #259536
FEATURES:
- One-time run of these roadnumbers, order now - limited quantity available!
- Prototypes introduced in 1990 - thousands still in service today
- Clerestory-style roof
- Late Trinity-style jacking pads and pulling tabs
- 1990s-era square cornered roof hatches
- Detailed hopper gates with vibrator brackets & outlets
- Perfect for serving Cornerstone(R) grain elevators, sold separately
- 100-ton trucks
- Correct 36 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Chemical Tankcar - Procor #84937
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
HO Duplex Sleeper - Canadian National - Wet Noodle #1136 / Endeavour
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
Evans X72 Box car: Penn Central w/ Small Logo - Single Car #266500
Detail Variations:
As operated between 1973 to 1976.
6-pack includes the following numbers:
#266500
#266822
#266899
#269175
#269447
#269990
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
Kadee Quality Products, #1686 Roundhead Screws 12 Pcs
1-72 by 1/4 inch
stainless steel
HO AutoFlood III RD Coal Hopper - UP/CMO #504294
The AutoFlood III Coal Hopper features:
- Die-cast frame and floor for optimum car weight
- Full interior rivet and K-member details
- Super-detailed end cages including separate air and brake piping
- Barber S-2 100-ton Trucks with metal wheels
- Hopper bays feature highly-detailed outlet gates
- Etched, see-through end cross-over platforms
- Full end detail, including uncoupling levers
- Separate grab irons installed at the factory
- Accurate paint and lettering
- Removable coal load included
- Multiple road numbers available for each scheme
ITLA ScaleModels Inc HO 4157 York Industries Inc
Configurable into Multiple Build Combinations
walls can be arranged can be arranged in at least 12 combinations to fit your layout needs
3D laser etched detailed surfaces on every wall
Basic L-Shaped dimensions are 6in L x 4.75in W x 5.5in H
This kit will also stretch into -Shallow Relief- and -Full Flat- formats up to 18.25in L x 0.5in W x 5.5in H
40Ft Corrugated Container NYK Logistics 2pk
NYKU #812286(9) , NYRU #824354(1)
NATO Green Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO Farmers Market with Accessories.
HO 50Ft PCF B70 Boxcar - w/ Superior Doors - Golden West/ SP Patch #243867
The PC&F B-70-69/71/75 Boxcar features:
Separately applied metal grab irons
Scale sized draft gear with a detailed Hydra-Cushion underframe
Full underbody brake rigging
Multiple door styles as appropriate for each fleet
Road number specific number patches
Separately applied coupler cut levers
Separate door tracks
Factory-installed Rapido semi-scale knuckle couplers
Newly tooled 70 ton trucks with turned metal 33inch wheels
Rapido Trains Inc. is proud to announce another essential modern freight car, the Pacific Car & Foundry B-70-69/71/75 class boxcar in HO scale!
As the demand grew in the 70s for larger capacity boxcars, along with the need to replace aging 40ft cars, this series of 50ft double door boxes was produced by PC&F for the Southern Pacific and its subsidiary St. Louis Southwestern (SSW). Constructed between 1972 and 1975, these boxcars are 50ft-7inch in length with a capacity of either 5258 cu ft for standard cars, or 5119 cu ft for those equipped for DF (Damage Free) Loading. All B-70 boxcars feature Hydra-Cushion underframes and were delivered with either Youngstown or Superior doors.
Proving to be a versatile addition to the SP/SSW fleet, these boxcars were later rebuilt for Golden West Service and could be seen carrying goods across the USA, Canada, and Mexico. Many can still be seen on the rails today, whether in their original SSW or SP paint, as former Golden West cars stenciled back into SP, or under entirely new ownership.
Athearn G25587 - HO 33,900 Gallon LPG Tank - PROX #2 (3 Pack)
Multiple road numbers, unique numbers between singles and 3-packs
Three different body phases: early, flat panel, and late
Separately applied walkway platform, manway, outlet, ladders, brake rigging detail, safety rail supports and tank saddles
Photo-etched metal walkways and end platforms
Wire safety rails and end handrails
Full underframe detail featuring body-mounted brakes or truck-mounted brakes as per prototype
Printed placards, where appropriate
Body-mounted, McHenry? scale double-shelf knuckle couplers
100-ton trucks with animated rotating bearing caps and printed road numbers
Machined metal wheels with RP25 contours
Accurately painted and printed for prototypical realism
Highly detailed, injection-molded body
Coupler lift bars, trainline hoses, brake hoses, and hardware
Weighted for optimum performance
Minimum radius: 18in - Recommended radius: 22in
HO 34Ft Ribbed Hopper - Lehigh Valley (4 pkg) #2
Detailed Information
MODEL FEATURES:
Fully assembled and ready for your layout
Removable coal load in each car
Machined metal wheels
Mchenry scale knuckle spring couplers installed
A total of 9 different road numbers available for each road name
Minimum radius: 15inch
5 x 8 inches - 12.7 x 20.3cm
Based on older architectural prototypes, this structure will add interest to the tired parts of your layout s town. The kit includes finely detailed Hydrocal® castings, windows, signs and step-by-step instructions that walk you through each stage of construction from putting the kit together to painting and aging
HO FMC 4700 Covered Hopper - VUHX (3pk)
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches
Tru Color Paint - Acrylic - Tuscan Red - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
Red, Black, Gray Load, Black Trucks
The Schnabel cars unique design allows it to carry extremely heavy or oversized loads, such as generators and transformers for power stations, by making the load an element of the car. The two tapered lifting arms that hold the load resemble a birds beak, which gave the car its name Schnabel is from the German for carrying-beak-wagon -Tragschnabelwagen. Schnabel is a funny name for a seriously powerful freight car.
Features include:
16 sets of 125-ton roller-bearing trucks
prototypically correct 36 inch metal wheels
RP25 wheel contours
8 span bolsters
detailed transformer load
molded hydraulic lines and pumps
27.5 inches long
E-Z Mate Mark II couplers
This model performs best on 22 inch radius curves or greater.
HO 85ft General American G85 Flatcar - Southern Pacific #512089
Walthers Mainline 85ft General American G85 Flatcar is based on a widely used car built in the 1960s by General American. The prototypes handled 40, 45 and 48ft trailers and 20 and 40ft containers from 1961 to the 1980s. The cars appeared in passenger consists in the 1960s hauling expedited trailers and containers, and some were used for trailer-on-flatcar (TOFC) and container-on-flatcar (COFC) service into the late 2000s.
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Prototypes handled trailers and containers from 1961 to the late 2000s
- Several different size nameplates to match prototype cars
- Equipped with General American (GATC) hitches in both up and down positions or container pedestals as appropriate
- Heavy die-cast metal center sill for excellent performance empty or loaded
- Detailed underbody with brake gear
- 70-Ton roller bearing trucks
- Correct 33 inch RP-25 turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Add more realism in minutes with SceneMaster(TM) trailers and containers (sold separately)
- PLEASE NOTE: Recommended minimum radius 24 inches
HO AutoScenes - Fritzs Front Loader
These three guys are ready to do some heavy lifting around your layout with their equipment!
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
HO Single-Track Railroad Bridge Stone Abutment - Resin Casting
Approximate Dimensions: 3-1/4 x 5/8 x 5-3/4 inches
FEATURES:
- Common prototype design used with various types of bridges
- Fits steam, diesel and modern-eras
- Highly detailed parts
- Use with Cornerstone single-track bridges
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
Gunderson Multi-Max Auto Rack - CP SOO
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
N Scale 52Ft Mill Gondola - Wisconsin Central (3pkg)
Detailed Information
MODEL FEATURES:
Body-mounted McHenry knuckle couplers installed
Fully assembled and ready for your layout
Screw mounted trucks for accurate tracking
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
HO GMD SD40-2W - DC/DCC Ready - CN (Non Dynamic Sergeant Stripes) #5357
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
1956/72 IHC-190 Tandem Tractor - Unpainted and Resin Cast Kit
Erie Lackawanna #2516 (gray, maroon, yellow, gray Roof)
Add classic diesel power to your roster or collection with this series of ready-to-run and highly detailed models with featuring upgraded handrails (correct for all phases), 9 Ft 4 inch AAR B trucks, metal MU hoses, air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, can motor, flywheels, nickel silver wheels with RP-25 flanges and knuckle couplers. Models feature factory-installed ESU LokSound sound and DCC.
Extension Cable, Plug - Socket, Length: 48 inches (5pk)
Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is integrated into the switch machine). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
The Walthers Layout Control System Extension Cable features:
- Easily extend connections to Controllers or Power Distribution Block
- Pack of five cables, each 48 inches (1.2m) long
- Fully assembled with servo style connectors
Building the Right-Sized Layout - Softcover Book
Softcover Book by Thomas Klimoski
112 Pages
Have an extra spare room in your house? Downsizing your layout? Building The Right-Sized Layout is the perfect book to help with planning a room-sized layout for your home. This new book features 5 track plans covering details on how to create a manageable layout with space, time, and resources in mind.
Youll find:
Track planning strategies
Construction techniques
Room-planning concepts
Tips on operating once your layout is built
And more!
Featuring author Thomas Klimoskis Georgia Northeastern Railroad, as well as 3 other examples of small layouts, this planning book is a must-have for model railroaders.
N Scale Just Plug Lighted Vehicle - Midnight Ride
Revved up and ready to go, this timeless coupe is ready for a night time cruise under the stars!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic. Add a vehicle to a Just Plug light hub for easy installation. Just plug and you are done!
20mA per Vehicle
HO Custom U.S. Mail Sacks (4pk)
Painted and labeled with vintage U.S. Mail labels.
HO Vintage Trackside Structures - Kit
Small structures like these were a fixture of steam- and early diesel-era rail yards and engine terminals. The Vintage Trackside Structures kit makes them easy to model with parts for five authentic HO structures, typical ofprototypes used by railroads large and small.
Easily mixed and matched to fit your layout, features include:
- Great value with five complete structure kits
- Perfect for steam- and early diesel-era engine terminals, yards and more
- Adaptable to mines, logging camps and other period industries
- Parts molded in tan, dark green, dark gray and concrete colors
Measures:
Blacksmith Shop and Coal Box: 2-5/8 x 2-25/32 x 2-1/16 inches
Small Shed: 1-3/4 x 1-3/8 x 1-11/16 inches
Pump House: 2-1/4 x 2-3/32 x 2-7/16 inches
Water Closet/Outhouse: 1-3/8 x 1-5/32 x 1-15/32 inches
Engineering Office & Coal Box - 4-29/32 x 3-7/16 x 3-1/8 inches
HO NSC 3294 Mechanical Reefer - Canadian Pacific Railway (Script Logo) #286413
The Rapido NSC 3294 CP Mechanical Reefer features:
Separate grab irons installed at the factory
Wire stirrup steps
100-ton Barber S-2 trucks, with electrical pick-up metal wheels
Rapido Semi Scale metal knuckle couplers
Drawn from original blueprints and drawings
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe, including piping and mechanical equipment
Optional sound unit available for easy installation
HO FMC 4700 Covered Hopper - NAHX #900118
MODEL FEATURES:
- Separately-applied brake gear including brake wheel, brake wheel housing, chain, brake lever, air reservoir, -brake cylinder and triple valve
- 100-ton trucks with 36 inch solid machined nickel silver wheels with RP25 contours operate on all popular brands of track
- Factory applied roof walk, roof hatch, end details, ladders, and wire grab irons
- Two outlet grate variations
- Accurately painted and printed on a highly detailed, injection molded body
- See-through etched metal end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Weighted for optimum performance
- All 3-packs feature unique road numbers
- Minimum radius: 18 inches
Burlington Northern #513932
Limited edition - one time run of these roadnumbers
Used to haul coal all across US
In service mid-1960s to mid-2000s
New die cast underframe
New sloped sheet braces
New updated brake gear
Correct 36 inch turned-metal wheelsets
Proto MAX(TM) metal knuckle couplers
HO 36ft Chemical Tank Car - Vulcan Chemical/GATX #33776
FEATURES:
- One-time run of these road numbers, order now, limited quantity available!
- Newly tooled tank with bolted jacket
- Perfect for steam- and diesel-era freight service
- Prototypes carried all types of chemicals between producers and end-users
- Small chemical/pressure dome
- See-through platform
- Correct 33 inch turned metal RP-25 wheelsets
- Proto MAX(TM) metal knuckle couplers
HO 60ft PS Auto Box - Norfolk & Western/NW #600415
MODEL FEATURES:
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Fully detailed full cushion underframe
- Full underframe detail: air brake reservoir, control valve,
- Separately applied door closure rods, side ladders, metal grab irons and brake cylinder with plumbing and brake rod details
- etched metal end platforms
- 100-Ton roller bearing trucks with operating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Machined metal wheels
- Weighted for trouble free operation
- Multiple road numbers
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
During the 1960s, Ford Motor Company, Pullman Standard and Santa Fe pooled their resources to develop a standard boxcar to meet the transportation needs of automobile manufacturers in the United States. Delivered in 1965, the Pullman Standard auto parts boxcar is the most prolific example of this type of freight car. It ultimately changed the face of automobile manufacturing and rail transportation.
PRIMED FOR GRIME MODELS FEATURE:
- Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Some Prime for Grime models feature paint scheme variations.
HO 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - CSX #242121
FEATURES:
- One time run of these roadnumbers, order now - limited quantity available
- Prototypes in service from late 1980s to the present
- Separately molded and applied hopper gates
- Correct 36 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
12inch Long Brass Channel - 0.014inch Thick x (1/8 x 1/8 inch Leg Lengths)
Brass Channel (1 pc)
Leg Lengths: 1/8 x 1/8 inch
HO GMD SD40-2 - DCC & Sound - Ontario Northland #1731
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
Athearn HO - 40ft Ribbed 3-bay Ballast Hopper - Norfolk Southern - #1 - 4pack
994681, 994698, 994743, 994756
Removable load
Separately applied wire grab irons and brake wheel
Solid nickel silver wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
GMD SD40-2f - DCC and Sound - CP Rail (Round Porthole, White Stripe) #9002
Ready To Run with specific details!
Features:
-Air hoses
-Windshield wipers
-Grab irons
-Coupler lift bars
-Operating headlight
-Window glass
-Roadname specific details
-Roadname specific fuel tanks
-Can motor
-Flywheels
-Nickel silver wheels with RP25 flanges
-Knuckle couplers
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound Select decoder.
HO EMD GP15-1 Diesel - DCC Ready - Conrail (Operation Lifesaver) #1662
ETA: July 2023
Detailed Information
CR FEATURES:
Operating class lights
Leslie 3-chime horn
Small EMD plow
Front ditch lights
Single large Sinclair antenna
Conrail ordered 100 GP15-1s in 1979. Intended for secondary and branch line trains, they featured snowplows on both ends for bidirectional use. Signal boxes were also standard equipment, allowing the GP15s to be used for road service when required. Most survived till the end of Conrail in 1998. They then joined the NS and CSX locomotive fleets with many retaining their Conrail blue and white paint with NS or CSX patches.
ROAD NUMBER SPECIFIC FEATURES:
#1645
Small -Quality- logo
Hyatt bearings
small EMD plow on both ends
front ditch lights
#1662
-Operation Lifesaver- logo
Hyatt bearings
small EMD plow on front end
ditch lights on both ends
#1667
Large -Quality- logo
Timken bearings
small EMD plow on both ends
front ditch lights
GP15 SERIES LOCOMOTIVE FEATURES:
Operating Class Lights (DCC only)
Operating Number boards
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and ?printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Minimum radius: 18inch Recommended radius: 22inch
LEGENDARY LIVERIES
What are Legendary Liveries? An Athearn exclusive, they are the ultimate answer to -What if?- Featuring some of the most popular railroad paint schemes of all time, these models are perfect for collecting, proto-freelancing, or just plain fun! Whether company proposed paint schemes, canceled locomotive orders, or alternate takes on history, Legendary Liveries are fun and unique additions to any roster. Enjoy these items, and answer the ultimate railroad question of: -What if?-
HO Magnetic Signal Co. Model 13 Wigwag Flagman
Red LEDs purchased separately on this page. This model requires a control circuit if you want it lighted. The banjo is static.---- We cannot guarantee that other red LEDs will fit into this model. LEDs were developed in partnership with Richmond Controls.
Evergreen Scale Models 4080 .080in Opaque White Polystyrene V Groove Siding (1sheet)
50ft Pullman Standard PS-2 2893 3 Bay Covered Hopper-
Product Information
Revolutionize your HO railroad with WalthersProto 50ft Pullman-Standard PS-2 2893 Three-Bay Covered Hoppers! From their introduction in the 1950s, these large capacity cars quickly changed how shippers and customers handled a wide range of loads including grain, plastic pellets, potash and similar loads.
Features of the cars include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from 1950s to 1990s
Used for grain, aggregates, plastic pellets, potash and similar loads
Detailed body with separately applied round hatches, walk ways, end platforms, brake gear and more
Correct 33ft RP-25 metal wheelsets
Proto Max(TM) metal knuckle coupler
N Budd RDC-1 (Ph 2) - DC/Silent - Painted, Unlettered
NOTE: All RDCs (unless noted) come without numbers. Basic numbering decals will be provided with each unit that is not numbered.
The Rapido N scale RDC features:
- Designed from original blueprints and field measurements
- Accurate Phase 1 and Phase 2 body details
- Both fabricated and cast trucks, as appropriate
- Single-motor, all-wheel drive for unparalleled reliability
- All-wheel electrical pickup
- Directional headlights and red marker lights
- Flicker-free interior lighting
- Tinted windows and fully detailed interiors
- DC/Silent (DCC Ready) or DC/DCC/Sound (ESU LokSound)
- Factory-installed couplers mounted at the correct height
Bi-Level Auto Racks - BNSF New Image - Orange Rack on TTGX Flat Car #TTGX 965341
N Scale AutoFlood III RD Coal Hopper - BNSF Wedge scheme - Single Car, Double Rotary #699623
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO GMD SD40-2W - DCC & Sound - CNNA (Dynamic Map) #5356
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. DCC with Sound version features LokSound V5 decoder.
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
Power Supply - 12V
This is an alternate power supply for use with either the #22-018-1 Power Pack SX or #22-019 Smart Device Controller.
Outputs DC13.5V - 2.2A
N Scale Ore Car - CP Rail (Multi-Mark)
Features include all new tooling, detailed graphics, metal wheels, and E-Z Mate Mark II couplers!
N Scale Rib-Side Single-Door 50Ft Boxcar No Roofwalk - CN Inspection Car #412091
Built in 1977 by FMC for Hartford & Slocomb Railroad, these 50Ft boxcars with Barber Roller Bearing trucks were later operated by the New Orleans Public Belt. Eventually, Union Pacific received the cars and painted them in their boxcar red scheme, with ex-Missouri-Kansas-Texas -BKTY- reporting mark and GATX lettering.
HO H21A 4-Bay Hopper - AB Brakes - Pennsylvania (PRR Red, Circle Keystone) #190483
1935+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
HO Greenville 86Ft Quad Plug Door Box Car - Repaint 1979+ - Chessie B&O #492354
Product: Greenville 86ft Quad Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber S-2 Birdsboro Roller Bearing
Wheels: CNC-Machined 33inch Wheels
Release Date: January 2022
B&O Chessie -Repaint 1979+- offers one of the most classy railroad logos so frequently seen on freight cars over recent decades: the Chessie -sleeping cat.- This car has the largest Chessie logo you will ever see on an HO scale freight car! This group of cars represents the B&O Chessie Cumberland MD shops 1979 repaints of the original B&O cars, which were originally delivered in 1970. These cars stand out with the large yellow-painted doors, white -excess height- end painting, and galvanized silver roofs. They also include the safety-inspired -bowling ball- logo on them, as well as era-appropriate ACI and U-1 -wheel dot- stenciling! This Greenville car features Morton style crossover platforms, an Ajax hand brake housing, accurate End-of-Car Cushioning details with truck mounted brake hardware, and 70-Ton Barber S-2 Trucks with 33inch wheels and accurate -Timken- roller bearing caps. Interestingly, B&O was the second-largest purchaser of the Greenville quad door box cars, and these eye-catchers went literally everywhere. We are now offering four B&O Chessie numbers. Chessie fans can now rejoice!
Fine Turf - Weeds
25.2 Cubic Inches Per Package
Particle size is approximately 1/1000inch - 1/32inch (0.025 mm - 0.079 mm)
Use Weeds Fine Turf to model realistic grass, low ground cover and for highlighting and accenting landscape. It is colorfast and blends naturally with other foliage. Use for any scale.
HO Class D10g 4-6-0 - DC/Silent - Canadian Pacific #926
Of course, like any steam engine, the D10s appearance changed over the years with variations in headlights, fuel type, walkways and more becoming apparent across each of the classes. Rapidos D10 will feature many optional details to accurately portray D10s in several configurations and sub-classes, including:
Coal or Oil tenders
Raised or straight walkways
Centered or smokebox-top mounted headlights
Straight or angled front number boards
Two styles of power reversers
Straight or angled cylinder steam pipes
Two different bell locations
The D10s drive will incorporate our smooth-running gear drive with flywheel - as derived from our Royal Hudson locomotive - allowing sure and silent operation. All models will be DCC ready, and sound equipped models will be fitted with custom sound decoders that feature synchronized effects for the ultimate in realism. Lighting effects will include headlights, marker lights, number boards and flickering firebox.
The Rapido HO Scale CPR D10-class Ten Wheeler model features:
Designed from blueprints and field measurements
Factory-applied details specific for each road number
Smooth-running drive and heavy diecast weight centred above the drivers for exceptional pulling power
Blackened metal wheels and driving rods
Working head, marker and classification lights, as well as a flickering firebox light
DCC sound version includes synchronized chuff, accurate whistle, bell and many other effects!
Accurate and complete piping, underbody and tender details
Accurate paint and decoration
18inch Minimum radius (22inch recommended)
Please Note: Not all lighting effects available on silent versions.
User-controlled sound features only accessible on DCC-equipped layouts.
HO 89Ft Flatcar w/Bi-Level Shielded Auto Rack - Atchison, Topeka & Santa Fe #88007 (ATSF Rack)
Product Information
Add more automobile traffic to your HO freight operations with the WalthersMainline 89Ft Flatcar with Bi-Level Shielded Auto Racks. Based on open racks updated in the late 1970s-early 1980s with sheet metal side panels to reduce damage from vandalism en route, the prototypes were primarily used to deliver light trucks and vans. Ready for service, features include:
One time run of these road numbers, order now - limited quantity available
New body style!
Prototypes in service from late 1970s to 1980s hauling light trucks and vans
Detailed flatcar with Paragon II style rack with side shields
Die-cast metal underframe
Swinging drawbars for 24inch and larger curves
Modeler-applied bridge plates for early cars
Perfect for use with Walthers Cornerstone(R) Auto Series kits (sold separately)
Correct 33inch RP-25 metal wheelsets and 70-ton trucks
Proto MAX(TM) metal knuckle couplers
Tear & Plant Meadow Mat - Plowed Field
DIMENSIONS:
8-5/8 x 7-7/8 inches (21.9 x 20cm)
FEATURES:
- Can be used for HO, N, O or larger scales
- One piece foam casting
- Realistic texture and color
- Easily cut with utility knife for smaller areas
- Includes 10 separate grass tufts for extra detail
- Heat with hairdryer and bend to fit uneven terrain
#153 Short 1/4inch Shank
All-metal -whisker- coupler with metal self-centering spring. Designed and tested for reliability, durability and long life. Compatible with Kadee HO couplers. Fits most HO scale equipment; can be used in place of No. 5 coupler.
HO ET44 Tier 4 - DCC Equipped - Kansas City Southern #5012
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO 70-Ton 12-Panel Hopper - Erie Lackawanna #33676
Blt.3-74
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
HO 40ft ACF Modernized Welded Boxcar - Pennsylvania Railroad #87510
FEATURES:
- Brand-new body style!
- One time run of these road numbers, order now - limited quantity available
- Prototypes used in general freight service from late 1960s to 1980s
- Based on cars rebuilt to comply with new safety standards including the following:
- No running boards or mounts on roof
- Tall ladders and molded roof-mounted grab iron at B (brake wheel end) only
- Short ladders at A end
- Detailed 10-panel body
- 8ft Youngstown doors
- Late Stanray 4/4 improved Dreadnaught ends
- Stanray diagonal panel roof
- Correct 33 inch turned metal RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
HO Gunderson 6276 50Ft Plate F Boxcar - AOK #115072
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
HO 40 Steel Side Box Car - Wabash NJI&I (Flour Loading) -Ready to Roll- No.1624
HO Gunderson 6276 50Ft Plate F Boxcar - AOK #115128
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - DEAX #11133
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO ACF 3560 Covered Hopper - Georgia Pacific #1000
Features:
-True scale dimensions with accurate details
-Weighted, detailed underframes
-Equipped with AccuMate Knuckle Couplers
-Trucks equipped with free-rolling metal wheels
-Accurate painting and lettering
HO EMD GP40 - DCC Ready - SSW/ Cotton Belt #7607
1966+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
N Scale Louvered Wall Vents - pkg(2)
12x12 scale feet / 15/16 x 15/16 inches.
HO Scale NSC 73Ft Centerbeam Flatcar - BC Rail #730447
The HO Scale NSC 73Ft Centerbeam Flatcar features:
Multiple side sill variations with different winch and ratchet configurations
Multiple top truss configurations; early Z pattern and standard closed pattern with and without tie-down brackets
Two deck configurations; early with risers and mid without risers
Two underbody configurations
Multiple end cage variants
Multiple brake stand options
Multiple truck types (six to be exact!)
Factory-installed rubber airhoses
See through eroded metal crossover platforms
Fully detailed underbodies with full brake piping & rigging
Factory-installed metal grab irons and coupler lift bars
Free rolling, metal wheelsets
HO Scale SD30C-ECO - DC/DCC Ready - Canadian Pacific #5038
The SD30C-ECOs have been delivered in two batches:
the first batch was comprised of unit numbers 5000-5019 (delivered in 2013) and the second batch included units 5020-5049. (delivered in 2015/16)
All of the SD30C-ECOs were rebuilt from -donor- SD40-2s and were given brand new pilots, fuel tanks, cabs, and noses, but retained the frames, steps, and trucks of their donor units. (as well as a great deal of the internal mechanical parts) The long hoods of the donor units were cut up and some components were spliced into the rebuild construction, so the rear-most section of the long hood containing the cooling fans and angled radiator grids is all new material but the section of the long hood between the rear wall of the cab and the back of the DB blister is retained from the donor unit. This means that there are several variations of exhaust hatches and traction motor blower ducts depending on which class of SD40-2 the donor unit came from. Most units in both orders were built from Canadian donor units and have GMD ladder-style steps and end platform handrails, but there are a few units mixed into both orders that were built from American donor units and have the angled steps and handrail profile characteristic of La Grange-built SD40-2s. Despite the unit-to-unit inconsistencies owing to the varied classes of the donor units, there are (luckily) a few spotting differences that are consistent between the two batches of rebuilds.
Units 5000-5019 are not locotrol equipped and all feature a single tubular -radome- on the cab roof that encloses all antennae. (GPS, EOT, and radio) All units from this order have standard road numbers but no additional information or lettering on the cab sides. Horns are mounted on top of the conductors side of the long hood just behind the DB fans, and the bells are located under the frame on the conductors side, just ahead of the fuel tank.
HO 53Ft Gunderson Husky-Stack Well Car - TTX (As Delivered) (2pkg) #645547, 645978
Does not include containers
Road Numbers Include:
645547
645978
The Rapido Trains HO scale Gunderson 53Ft Husky Stack well car features:
See-through etched metal walkways
Fully die-cast body for exceptional weight and balance
Injection moulded plastic end handrails and brake components
Accurate painting and lettering
Free-rolling 70-ton trucks with 33inch metal wheels
Metal knuckle couplers
HO EMD FT A+B Set - DC/Silent - Reading (Black & Green) #256A + 256B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
Rescue Firefighters
Six Firefighters to the rescue! They come in various action poses, fighting fires and saving lives. Includes three attached hoses and a fire hydrant.
HO SD45-2 - DCC Ready - Seaboard Coast Line SCL #2045
SCL FEATURES:
Seaboard Coast Line Predecessor Atlantic Coast Line began purchasing SD45s in 1968 and after the merger with Seaboard Airline the trend continued. By 1974 though EMD had a new upgraded version, the SD45-2 and SCL purchased 15 of them.
SD45-2 LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Fully-assembled and ready-to-run
Minimum radius: 18inch - Recommended radius: 22inch
N Scale Curved Roadbed Track Section - 15-Degree 12-3/8 inch (315mm) Radius (4pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO EMD SD70M-2 Diesel - DCC & Sound - Providence and Worcester Railroad P&W #4301
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
PW FEATURES:
Former FEC units
Repainted into orange and black
Horns mounted on the side of the long hood; separate horn styles for each road number
P&Ws two units were originally painted orange and brown and ran for several years in this guise. In 2021 they were repainted into the orange-and black scheme of parent company Genesee and Wyoming.
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Lightweight Coach - GTW - 1954 Scheme #4884
This new run of cars features many improvements:
- Track-powered interior lighting with capacitor controlled by our (often imitated, never duplicated)
Rapido Lighter
- Improved design and assembly to prevent warping
- Tighter connections between the body and the roof
- Lightweight Coaches and Duplex Sleepers feature new Trane air conditioner details
- New couplers designed for more reliable operation when pulled or pushed
- Redesigned, free-rolling trucks
- All of this is in addition to the incredible underbody detail, multi-color interior, skirts or stairs (as
appropriate) and extremely fine painting and decoration, down to the end door car names and
numbers!
This run of the Super Continental Line comprises three car styles:
- Lightweight Coach
- 8-4-4 Duplex Sleeper (4-8-4 in Canada)
- 10-5 Sleeper
HO Budd Coach: Painted, Unlettered
Rapido is pleased to announce the Superior Stainless Budd Coaches, as well as VIA Rail HEP1 & HEP2 Coaches, in HO Scale.
All 30 Coaches were delivered to Canadian Pacific in 1954 and 1955 and were initially numbered in the 100-series under Canadian Pacific. All but one of the original coaches were transferred to VIA Rail Canada in 1978 and, save for those damaged in derailments, are all still in use today. They form the backbone of most of VIA Rail Canadas services to this day, found not only on the busy Quebec City-Windsor corridor, but on all other services across the country, including The Canadian, Ocean, Hudson Bay and northern Quebec services.
Beginning in the late 1980s, VIA Rail upgraded its entire ex CPR Budd stainless steel fleet with Head End Power (referred to as HEP), which allowed newer locomotives to be able to heat the trains without the need for aging steam generator cars. These cars are called HEP1 cars and are typically found on long-distance trains today. Many coaches and baggage cars can also be found in intercity service on the Quebec City-Windsor corridor.
Additionally, VIA Rail began purchasing second-hand Budd cars throughout 1990s from Amtrak and other second/third/forth-hand owners to supplement its fleet and allow for expansion. These cars would be completely rebuilt as either first class VIA 1 Cars or Coaches and were called HEP2 cars. These cars contain pass-through MU (multiple unit) cables and are almost exclusively found in intercity service on the Quebec City-Windsor corridor.
Our models are based on the original, steam-heated Canadian Pacific cars. However, we have tooled new HEP2 car sides as well as both HEP1 and HEP2 car ends.
Most of the Budd cars originally purchased by Canadian Pacific, as well as those bought used by VIA Rail, continue to form an integral part of both intercity and long distance services to this day. They will no doubt find a suitable use on your model railroad too.
Each Rapido Superior Stainless Coach includes:
- Realistic stainless steel finish
- HEP2 cars feature an all-new side window arrangements
- HEP1 and HEP2 cars feature all-new end tooling with HEP receptacles and cables
- HEP1 and HEP2 cars feature working end marker lights
- Track-powered interior lighting compatible with DC and DCC layouts
- Full underbody detail including separate air, steam and electrical lines
- Separate metal grab irons, stirrups and end gates
- Accurate D22 brake equipment and piping
- Super-detailed 41-NDO-11 trucks with end frames
- Full, multi-color interior detail
- 3D CP beaver shields on CPR models
- Sprung diaphragms
- Metal Macdonald-Cartier knuckle couplers
HO Chocolate Factory - Kit
Here is a great trackside industry for your contemporary HO railroad! The Cornerstone Chocolate Factory is typical of regional specialty producers supplying chocolate to other food producers. A super value with three detailed structure kits and accessories, check out these additional features:
- Separate two-story brick office
- Large main building w/truck pull-in and loading dock
- Railcar and truck receiving building
- Gravity-feed upright storage tanks
- Pipe bridge w/piping
- Unloading/loading rack for tank cars, hoppers and semi-trailers
- Roof-top vents and three large air conditioners, electrical equipment box and meters, truck docks with weather bellows, roadside sign
- Easily adapted to other modern industries w/road and rail access
- Molded in 4 colors with clear acetate
DIMENSIONS:
Main Building: 20-13/16 x 9-3/8 x 6-3/16 inches (53 x 23.7 x 15.6cm)
Receiving Building: 8-7/8 x 5-15/16 x 4-1/2 inches (22.4 x 15.1 x 11.6cm)
Storage Tanks: 4-7/16 x 2-3/16 x 7-1/2 inches (11.2 x 5.54 x 19cm)
Office: 5-29/32 x 3-1/2 x 2-15/16 inches (15 x 9 x 7.4cm)
HO 60ft PS Flatcar - Trailer Train/VTTX #97611
(yellow, black TT logo)
FEATURES:
- One time run of these road numbers, order now - limited quantity available!
- Based on 4000+ cars built by Pullman-Standard in service from the mid-1960s to today!
- Backbone of the TTX 60ft flatcar fleet - similar cars used by many railroads
- Used to ship all types of general freight as well as auto and truck frames, canisters, farm equipment, construction machinery, military vehicles, containers, logs, lumber, building materials, 20 and 40ft containers, and 45 or 48ft trailers
- Superbly detailed decks match different prototype configurations
- Correct board pattern with realistic wood grain and bolt details
- Brake wheel cutout as appropriate
- Heavily weighted for excellent performance loaded or empty
- Detailed brake gear with piping
- 70-ton roller bearing trucks
- Correct 33 inch turned metal wheelsets
- Proto MAX(TM) metal knuckle couplers
Anti-Glare Panels Lt Bl&Maro
HO Greenbrier 7550 cf 60' Plate F Boxcar - BKTY (UP Yellow) #160085
Aurora Miniatures North America Inc. is proud to offer the HO Greenbrier 7550 cf 60? Plate F Boxcar, in multiple road name-specific and era-specific detail variations. The replica of this iconic 21st century 60? boxcar shares the same epic design philosophy and attention to detail as our previously-released 50? version. No other model train manufacturer?s previous attempts come close to matching the Aurora treatment! DO NOT SETTLE FOR SECOND BEST? AURORA MINIATURES IS #1!
Model Features:
The ultimate, end-all HO scale model of this popular boxcar!
Based on multiple variations of the 60? Plate F boxcars built by The Greenbrier Companies from 2003 to present day.
All-new model, meticulously designed using various prototype resources with unrivalled accuracy and attention to detail.
Highly detailed, injection-moulded plastic body with accurately rendered detail variations.
Separately applied ladders, handrails, grab irons, coupler cut levers and air hoses.
Fully replicated underbody details: control valve, two-sided release road with mounts, empty/load sensor, diagonally mounted air reservoir, brake cylinder, low-mounted brake rods, full piping details connecting all components.
Separately applied vertical wheel handbrake with release lever, handbrake chain and bell crank on B-end.
Near-scale size draft gear box with side key detail and cushion detail.
Aurora-designed 100-ton roller-bearing freight car truck system with sideframe variations, fully replicated bolster & center plate detail, side bearing and brake beams.
NMRA RP-25, Code 110, machined metal 36? wheelsets featuring rotating bearing caps, prototypical wheel contour and axle tapering.
Rotating ?Timken? or ?Brenco? bearing caps, per prototype.
Aurora Janney scale head couplers installed.
Precision painting and lettering.
Multiple road numbers offered for each paint scheme.
HO 53Ft 6Inch AAR 70 Ton Flatcar - Pere Marquette #16615
Date: BLT 1-43
-All are Ready-to-Run
-Laser Cut Wood Deck
-Laser Sharp Painting and Printing
-33inch InterMountain Metal Wheelsets
-Metal Knuckle Couplers
Minimum Radius - 18inch
HO International Wide-Vision Caboose - Northern Pacific (1969) #10411
(Delivery 1969 w/ Pyle Lanterns)
Product: BN International Wide-vision Caboose
Scale: HO Scale 1:87.1
Truck: Tangent 70-Ton Barber or Gould Caboose Roller Bearing with separate brake beam part as appropriate for each paint scheme
Wheels: CNC-Machined 33 inch Wheels
DC/DCC Lighting Features: Interior Lighting as well as lighted FRA Steady Red Lights
EVODX - Evolution Express Advanced 5A/8A Duplex Starter Set
Everything you need to get started with Advanced Digitrax Command Control.
Evolution Express is perfect for most home and club layouts wanting Duplex Radio control out of the box.
It offers excellent speed control, prototypical consisting, the full range of programming features and much more.
Maximum capacity, maximum features. Take it to the Max with Evolution Express!
Evolution Express Duplex Set Includes:
DCS210+ Command Station/Booster With Intelligent AutoReverse
DT602D Super LocoNet Throttle
UR93 Duplex Radio Transceiver Panel
PS615 Power Supply
PS14 Power Supply (For UR93)
Evolution Manual
The DT602D Advanced Super Throttle & DCS210 Advanced Command Station Offers:
Works with compatible LocoNet systems
Color 2.4in LCD Display Screen
Full Duplex radio when paired with a UR92 or compatible Duplex Transceiver (sold separately)
Advanced menu system and displays
Built-in scrolling help and prompting
Soft ON/OFF switch, with zero OFF power-drain
Advanced display Power Saving for longer wireless battery operation
Throttles are now powered in wireless modes by 3 AA cells! No more 9V batteries to remove!
Can use recharged AA batteries
Works in standard tethered, IR or Radio Duplex modes
Duplex Scan for available Networks and radio signal strength. Run without cords!
All throttles come with a LocoNet cord that can be unplugged, and is replaceable
Dual throttle controls let you control two locos simultaneously
Run locomotives with encoder click knobs for both speed and direction control
Full numeric keypad makes loco selection simple
Control light and sound effects functions with the press of a button
Control 29 functions (F0-F28).
Function active/inactive indicators
Convenient step-by-step throttle option set up
Supports simplified decoder programming
Simplified 2 or 4 digit addressing setup
Over 9,000 locomotive decoder addresses
Supports turnout and stationary decoder control
Over 2000 turnout decoder addresses
Fast clock display
Recall feature
Advanced Route editor
Big System Capacity for Big Layouts:
Run up to 100 addresses at the same time on your system.
Run up to 100 throttles at the same time on your system.
Over 9000 Locomotive Addresses:
Address 00 for operation of one loco or MU consist without decoders
Two Digit Addressing is easy to use. (Address 01-127)
Four Digit Addressing lets you use the road number of your engines as their addresses. (Address 0128-9000+)
5 or 8 Amps of Power to Run More Trains:
Selectable Scale Voltage for Safe Operation in ALL Scales
Customizable Voltage Settings
5 amps of power with included PS615 power supply
8 amps with PS2012E power supply (sold separately)
Function Control:
Control 29 functions (F0-F28).
Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder capabilities).
Two DCC Outputs are Better than One!
Use one output for programming decoders while the other runs the layout. No need to shut down the layout to program decoders!
Use one output for a braking section while the other runs the layout.
Decoder Programming:
Built in read/write programmer lets you program and read back CV values.
Supports Paged programming (Digitrax preferred method). Also supports direct, register and ops mode programming
Consisting:
Supports Universal consisting (Digitrax preferred method). Allows ALL locos to be consisted prototypically, even analog locos.
Advanced consisting and Basic consisting, too!
Nested consisting where consists can be consisted together.
Stationary Decoders, Turnout Control & Turnout Position Reporting:
Access to stationary decoder control for turnouts and other devices.
DT602 reports turnout position based on last command sent.
Control 2000+ stationary decoder addresses.
Routes:
Turnout List/Route capability to simplify complex yard operations.
EZ routes button for simplified Command Station route programming
Customizable System Options:
Turn audible warnings on or off.
Set up purging options.
Multi-format command station mode.
Loco Reset button for easy system purging
UR93 Duplex Radio Transceiver Panel:
Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support).
More than double the radio range of UR92 Duplex units.
Plug and Play setup, PS14 Universal power supply included.
Compatible to be mixed with UR92 LocoNet Duplex Radio systems, for added coverage and reception.
Status LEDS.
Supports combinations of DT602D/DE and DT500D, DT400D and UT4D Duplex Radio throttles.
UR93E available for countries that require EN-300-328 Wireless conformity.
Expandability:
Evolution is just the beginning for large, complex layouts that emphasize prototypical operations.
With LocoNet you can add more boosters, throttles, power management, detection, transponding, signaling and much more.
DCS210+ comes with 3 LocoNet ports for easy expandability and a USB Interface!
Other Advanced Features:
IPL updatable firmware for continued product improvements
Device Query and Device Statistics to help with troubleshooting
Input Mode to help set up detection on your layout
Uses Expanded slots
Evans X72 Box car: Conrail Large Logo - Single Car #269325
Detail Variations:
As operated between 1976 to the 1990s.
6-pack includes the following numbers:
#266873
#266899
#269252
#269325
#269377
#269423
The Rapido X72 Boxcar features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Separate door posts, door latches and coupler cut levers
Fully-detailed underframe including separate piping and equipment
Detailed cushion draft gear with Kadee #158 whisker couplers
Fully-detailed 70-ton trucks with 33Inch metal wheels
Auto Rack Loading Ramp - Kit - Yellow
Metallic Black Lacquer Finish Paint
10 ml
Lacquer Paints
Tamiya Color bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
Colors may vary slightly from Tamiya Color Acrylics and Sprays with the same name.
HO 70 Ton 13 Panel 3-Bay Hopper Car - Pennsylvania (H37B Simplified) #272517
Ready to Run.
Features:
Crisp details and sharp painting and printing,
metal wheels and knuckle couplers
HO RTR 37ft 2980 Cubic-Foot 2-Bay Covered Hopper - Santa Fe (ATSF) #350037
Product Information
Serve a wide range of HO industries with the 37ft 2980 Cubic-Foot Two-Bay Covered Hoppers from WalthersMainline. Based on prototypes introduced in the late 1980s, they can be found hauling cement, fracking sand, roofing granules and similar loads. Features of the layout-ready models include:
One time run of these roadnumbers, order now - limited quantity available
Prototypes in service from late 1980s to the present
Separately molded and applied hopper gates
Correct 36inch turned metal wheelsets
Proto MAX(TM) metal knuckle couplers
Perfect for serving Glacier Industrial Sands (#933-4035) and Rail-to-Road Aggregate Transfer (#933-4036) both sold separately
1956-72 IHC-190/LaFrance Pumper - Unpainted and Resin Cast Kit
HO EMD SD70ACe Diesel - DCC Ready - Progress Rail (EMDX) #2121
SD70ACe SERIES LOCOMOTIVE FEATURES:
Flexible rubber trainline hose
Flexible rubber MU hoses
Etched see-through steps
Lift rings
Lit Number Boards & Truck Lights
Sander lines
Minimum radius: 18inch - Recommended radius: 22inch
PRLX FEATURES:
Late production units with isolated cabs and PTC antennas
Large inverter cabinet grills
Front and rear ditch lights
Due to surplus production line capacity, Progress Rail outshopped several locomotives in the early 2020s (some sources indicate that these units were to be part of a Norfolk Southern order). The two units on offer here are known as -Tier 4 Credit SD70ACes-, and are produced using -banked- credits that are obtained from the production of tier 4 emissions-compliant units.
GENESIS DIESEL LOCOMOTIVE FEATURES:
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
Eight-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
Coupler cut levers
MU hoses
HO Greenbrier 7550 cf 60' Plate F Boxcar - LRS #141073
Aurora Miniatures North America Inc. is proud to offer the HO Greenbrier 7550 cf 60? Plate F Boxcar, in multiple road name-specific and era-specific detail variations. The replica of this iconic 21st century 60? boxcar shares the same epic design philosophy and attention to detail as our previously-released 50? version. No other model train manufacturer?s previous attempts come close to matching the Aurora treatment! DO NOT SETTLE FOR SECOND BEST? AURORA MINIATURES IS #1!
Model Features:
The ultimate, end-all HO scale model of this popular boxcar!
Based on multiple variations of the 60? Plate F boxcars built by The Greenbrier Companies from 2003 to present day.
All-new model, meticulously designed using various prototype resources with unrivalled accuracy and attention to detail.
Highly detailed, injection-moulded plastic body with accurately rendered detail variations.
Separately applied ladders, handrails, grab irons, coupler cut levers and air hoses.
Fully replicated underbody details: control valve, two-sided release road with mounts, empty/load sensor, diagonally mounted air reservoir, brake cylinder, low-mounted brake rods, full piping details connecting all components.
Separately applied vertical wheel handbrake with release lever, handbrake chain and bell crank on B-end.
Near-scale size draft gear box with side key detail and cushion detail.
Aurora-designed 100-ton roller-bearing freight car truck system with sideframe variations, fully replicated bolster & center plate detail, side bearing and brake beams.
NMRA RP-25, Code 110, machined metal 36? wheelsets featuring rotating bearing caps, prototypical wheel contour and axle tapering.
Rotating ?Timken? or ?Brenco? bearing caps, per prototype.
Aurora Janney scale head couplers installed.
Precision painting and lettering.
Multiple road numbers offered for each paint scheme.
HO GE U50 Diesel - DCC & Sound - Southern Pacific #9950
ETA: July 2023
Detailed Information
SP FEATURES:
SP Style -Big Hole- Emergency light (Flash function in DCC only)
Classification lights (Function in DCC only)
Working Truck lights
Number board lights
MU hoses
Separate see-through air intake grills
Due to the increase of better highways in the 1950s the trucking industry was beginning to siphon off time sensitive traffic from the railroads. Consequently, in the late 1950s the Southern Pacific and the Union Pacific railroads were seeking ways to increase the horsepower of their locomotives to help improve train speeds without having to add more locomotives to their trains. The SP was striving to improve transit times on their Sunset Route freights and was utilizing large groups of lower horsepower locomotives to do so. One method to achieve these goals was to mount two complete prime movers on one chassis. UP asked the 3 major locomotive builders at that time to submit proposals using this concept. In response, General Electric created their 5,000-horsepower U50 model, a design which utilized two 2500-horsepower prime movers. SP decided to give 3 of them a try, receiving them in the summer of 1964, but chose not to order any others. They spent most their early service lives working on SPs Sunset Route and ended their SP careers in the 1970s working in drag freight service in the Los Angeles Basin in California. All three were scrapped by 1979.
U50 SERIES LOCOMOTIVE FEATURES:
Illuminated truck lights
Illuminated classification lights
Illuminated number boards
See-through air intakes
4-cube speakers
Minimum radius: 18inch Recommended radius: 22inch
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Wire grab irons
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and printed paint schemes
Fully-assembled and ready-to-run
Packaging securely holds the model for safe storage
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Four cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lash up with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Evergreen Scale Models - Opaque White Polystyrene T Shape .092In x 14In (4 pcs pkg)
Micro Engineering 15106 - HOn3 Code 70 #6 Turnout - Right Hand
Micro Engineering Turnouts for H0n3 are available as left or right hand in code 70 rail.
Inevitably UK modellers as what radius they are but the diverging route on a US (or real railway) turnout isnt a curve but instead it diverges at and angle. The only curved elements being to connect the two straight routes. The number, in this case #6 is the angle between them as 1 in 6
International 7600 3-Axle Tank Truck with Tank Trailer - Red Cab - Chrome tanks
HO FCA 52ft 100-Ton Bulkhead Flatcar - CWLX #200023
NO LOAD PROVIDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of pipe and other pipe products to oil field and oil producer sites, various sizes of pipe, and colour end threaded rods.
Era - 2016 to Present
Model Features:
- Accurate side stake profiled based on real measurements.
- Re-inforced ends and prototypical flooring
- Correct size air reservoir and brake levers in -release- position
- Metal wheels and knuckle coupler
- Coupler Cut bars and correct air hoses
- All new model designed up using industry sources, and field measurements
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating wheel caps, with appropriate Bremco or Timken where appropriate
- Empty/load equipment full detail
HO Gunderson 6276 50Ft Plate F Boxcar - TTX (2016) #506858
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
Model Wash - Dark Green - 35ml Bottle
Model Wash is a range of washes created with a unique water-based formula. The product provides the model painter with new techniques for rendering the processes of ageing and exposure to the elements. Colors with a matt finish and of high capillarity, formulated to bring forth the minute details of the panels of the model and the contrasts produced by the wear and accumulated grime caused by operative and weather exposure. The versatility of Model Wash makes the product equally useful for a quick shading as for the creation of caked dust and dirt around the details of the model, such as rivets and panel lines. The washes are also used as a filter, applied in a uniform manner on the model to modify the base color. Model Wash can be applied by brush and airbrush and dries very quickly so that after some 20 minutes the painting or weathering process can be continued. Painting tools are cleaned with water.
SAFETY: Model Wash is not flammable, and does not contain solvents.
PACKAGING: 35 ml bottle with a flip top/eyedropper closure.
APPLICATIONS: Model Wash Dark Green is recommended for all models painted in green, and is also perfect for camouflage colors and natural scenes with vegetation, rivers and lakes.
Carrier Reefer Unit
Kit - Fits Any Semi Reefer Trailer
NO More to be Made Again !!!
HO AutoScenes - Billy Browns Coupe
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
Includes 11 horns
The Rapido Trains Diesel Horn Variety Pack includes: K3L, K3LR, M3H, M3HR (3 Versions), M5, 2 Leslie Single Chimes, K5LA and a Hancock Air Whistle.
Plastruct 91360 Tinted Mirrored Sheer- Silver (2pcs pkg)
100x300x1mm
N Scale Household Posters & Signs - 1940-50s (41)
41 full color household and related products posters & signs from the 1940s and 50s. Unique weathering and application instructions included in all poster/sign packs.
HO Auto-Max Carrier - BNSF/Large Circle #314192
Era: Late 2000+
MODEL FEATURES:
- Separately applied ladders, brake rigging, stirrups, and handbrake details
- Simulated corrugated roof
- Full articulation with flexible diaphragm
- Safety striping
- 70-ton roller bearing trucks
- 33 inch machined metal wheels with RP25 contours
- Weighted for optimum performance
- Body-mounted McHenry operating scale knuckle couplers
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
In 1999, Gunderson began production of the Auto-Max articulated auto rack car. This unique car can carry 22 SUVs on three sets of internal ramps. Measuring over 140 feet long and 20 feet tall from the railhead, the Auto-Max pushes the operational and clearance limits of the railroad industry.
Western Coal Flood Loader - Kit
32 x 4-1/2 x 16 81.3 x 11.4 x 40.6cm - Conveyor Sections; 7-1/16inch 18cm Ea
The basic building includes a variety of roof-top machinery that puts realistic detail in this highly visible location. Modular conveyor sections can be arranged in a variety of ways, or combined with other buildings like the New River Mining Company, (933-3017) or Glacier Gravel (933-3062) to model a complete scene. And, the stackable silo sections allow you to easily build a tall or short structure that can fit where overhead clearance may be limited.
HO 200-Ton Crane w/Tender - Norfolk Southern/Orange #92545
MODEL FEATURES:
Rotating boom
Boom raises and lowers
Blocks raise and lower
Flat car with boom support arms
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Weighted for trouble free operation
Trucks with machined metal wheels and RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18in
PROTOTYPE AND BACKGROUND INFO:
The first railroad cranes relied on locomotives for positioning around the work site. Some big cranes required water tenders to power their steam boilers to operate and rotate the boom. Many of these cranes lasted into the late 1970s and 1980s before being converted to diesel. Some cranes were constructed as diesel towards the end of the steam era. Standard pulling operations for a 200 ton crane required at least 5 idler cars between the locomotive and the crane when in transit from one location to another. The reason was for more braking power as these cranes were often just as heavy, or perhaps heavier, than a single locomotive of the time.
HO ALCo RS-3, Phase 3 - DCC Ready - Burlington Northern #4081
FEATURES:
- air hoses
- windshield wipers
- grab irons
- coupler lift bars
- operating headlight
- window glass
- fuel tank
- can motor
- flywheels
- blackened wheels with RP25 flanges and knuckle couplers
- Analog (DC) version features 21 pin plug for DCC
- DCC/Sound version features LokSound V5 decoder
N Tall Steel Viaduct 40ft Bridge Connector
The Micro Engineering Company was founded in 1964 and over the years has become one of the leading companies in the US manufacturing model railway accessories. They started of producing scale model railway track in a single gauge then expanded this into a long line of track and track accessories in HO, N, G and O gauge scales. They then branched out into a wide range of highly detailed injection molded styrene kits including buildings, girder bridges, trackside accessories and much much more.
These tall steel viaducts are some of the most spectacular, impressive and interesting bridges on the railways. They are used to span wide and/or steep valleys, often replacing the old wooden trestle bridges. The bridges are beautifully detailed and are often the center piece of the modellers layout. The bridge connector kit is used for connecting 2 N gauge Tall Steel Viaduct Bridge kits together to form a longer bridge. The kit includes 1 x 40ft span and 1 x 4 story tower. Detail includes bent and tower cross bracing, cross lacing, gusset plates and extensive rivet detail.
The bridges are easy to assemble pre-colored injection molded styrene kits that require assembling and glueing. An illustrated instruction sheet is included to enable you to build the bridge of your dreams for your model railway.
Specs:
Scale: N
Materials: Injection molded styrene
Assembly: Requires assembling and glueing
Painting: Pre-colored, does not require painting
Dimensions: Length 3in
HO ET44 Tier 4 - DCC & Sound - CN/100th Anniversary #3242
Road number 3108 Has a black cab roof; does not have the circle graphic on the nose
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
SubTerrain System - Foam Risers (2in)
4/pkg - 2 x 2-1/2 x 24 inches (5.08 cm x 6.35 cm x 60.9 cm)
Risers are generally used with incline/decline starters to create varying grades on your layout. Risers are easily flexed to form curves and work on plywood or foam bases. To install, pin in place with foam nails and attach with foam tack glue or low temp foam glue gun and glue sticks.
HO Scale Whisker Metal Couplers & Scale Gearboxes - Medium (9/32in) Centerset Shank (2pair)
The #178 Kadee Magne-Matic Coupler features a Scale Metal Whisker Coupler (a smaller head coupler which is more to scale and is patterned after the type E couplers), insulated Scale Draft Gear Box and Lid with rear and center screw holes for mounting.
2-56 screws are the most commonly used for center hole.
0-48 or 0-80 screws are used for rear hole.
Screw length will very depending on the mounting situation.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.
Package Includes:
(2) Pair #178 Scale Whisker Metal Couplers - Medium Centerset Shank
(2) Pair #178 Scale Snap-Together Gearboxes and lids
(2) #625 Knuckle Springs
Evergreen Scale Models 117 Opaque White Polystyrene Strips 14in .015x.156 (10pcs pkg)
HO EMD FT A+B Set - DC/Silent - Milwaukee (1948 Repaints) #35D + 35C
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
N Scale 3230 Covered Hopper - TXI (GBRX) #65004
Features:
- All new tooling
- Ready to run
- Injection molded plastic
- Fine scale detail
- Etched metal roofwalks
- Crisp painting and printing
- Magnetic couplers
- Metal wheelsets
The Trinity 3230 Pressure Differential (PD) covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
HO NSC 3800 Covered Hopper - TH&B (Delivery Scheme) #1515
They are back, again! The famous Rapido 3800 cu.ft. Cylindrical Hoppers make a triumphant ~THIRD~ return with new road numbers and paint schemes!
FEATURES INCLUDE:
- Round-hatch or Trough-hatch design
- Correct Dofasco S-2 100-ton trucks
- Two body variations with 6- or 11-side panels
- Three brake equipment variations and optional additional air reservoir on NSC cars (if applicable)
- Etched running boards and brake crossover platform
- Factory-installed air pipes and coupler cut levers
- Finely molded plastic walkway supports and end cages
- Full separate air piping and brake equipment details
HO Canadian Pacific Locomotives (Solid Beaver Logo) 2017+ - Waterslide Decal
HO Scale 85 ACF Dome Diner - Union Pacific 8008 (Heritage Fleet, City of Portland; yellow, gray)
In response to many requests, Walthers is pleased to announce HO models of the historic Union Pacific train honoring the late President George H. W. Bush, which will include a WalthersMainline SD70ACe 4141, and select WalthersProto cars from the Heritage Fleet. Each car comes fully assembled for operation or display, with a variety of features as noted below. Perfect for fan trips and special events behind 4141 and other UP power
First time with factory-printed UPP numbers and car names
Baggage car includes full-color Presidential Seal decal
Finished in modern-era UP excursion scheme
Factory-installed grab irons
Prototypically accurate window tinting as appropriate
Delivered new from American Car & Foundry in 1955 as 8008, this car was sold to the original Auto Train in 1972 and remained on its roster until 1981. A year later it was transferred to Kansas City Southern, where it was to be renumbered as car 19, but never saw service. UP reacquired the car in 1990 and named it for its Chicago-Portland Streamliner that ran from 1935 to 1971.
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24inch radius is recommended for operation.
HO ACF 5250 Covered Hopper - General American (GACX) #60423
Features:
Ready to run
Injection molded plastic
Fine scale detail
Etched metal roof walk
Metal knuckle couplers
Road specific hatch and outlet configurations
Road specific roof walk variations
Three body style variations
Separately applied wire grab irons and wire brake lines
Crisp painting/printing
Free-rolling 100-ton trucks
HO Highway Pier
The Rix Highway Overpass for HO scale is modeled after the bridges built during the 1930s and 1940s to span over railroad tracks. This style of bridge was used all over the country and is common to most people. The pier is designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy!
Contains: 1 pier only.
HO 60ft PS Auto Box - Norfolk & Western/NW #600429
MODEL FEATURES:
- Accurately painted and printed for prototypical realism
- Highly-detailed, injection-molded body
- Fully detailed full cushion underframe
- Full underframe detail: air brake reservoir, control valve,
- Separately applied door closure rods, side ladders, metal grab irons and brake cylinder with plumbing and brake rod details
- etched metal end platforms
- 100-Ton roller bearing trucks with operating bearing caps
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Machined metal wheels
- Weighted for trouble free operation
- Multiple road numbers
- Minimum radius: 22 inches
PROTOTYPE AND BACKGROUND INFO:
During the 1960s, Ford Motor Company, Pullman Standard and Santa Fe pooled their resources to develop a standard boxcar to meet the transportation needs of automobile manufacturers in the United States. Delivered in 1965, the Pullman Standard auto parts boxcar is the most prolific example of this type of freight car. It ultimately changed the face of automobile manufacturing and rail transportation.
PRIMED FOR GRIME MODELS FEATURE:
- Faded base colors matched to the prototype, the perfect starting point for adding grime and rust
- Patches applied and shaped per road number matching each corresponding side to the prototype
- Duplicated look and feel of In Service equipment; Tattered and Torn just like the real thing
- Some Prime for Grime models feature paint scheme variations.
HO 1/87 New Look Bus (Deluxe) - Miami-Dade #195
The Rapido Trains HO scale New Look Bus models features:
-Correct tubular profile traced from a 3D-scan of a real New Look Bus.
-Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
-Optional left-side emergency exit door and either single- or dual-stream rear doors
-Full interior including separate bench seats and grooved flooring.
-Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
-Steerable front wheels and REAL rubber tires.
-Three types of bumpers − steel, water and rubber.
-A wide variety of optional detail parts included.
-Separate advertisement frames included with each model.
-Pre-installed route destination signs for added realism.
-Working interior lights, headlights and tail lights.
-Installed as appropriate
A 9-12 volt DC power supply (not included) is required to power the lighting features.
.100in Opaque White Polystyrene Board and Batten Siding (1 Sheet)
.040in (1.0mm) THICK X .100in (2.5mm) GROOVE SPACING (BOARD), .020in (.50mm) RIB WIDTH (BATTEN)
6in x 12in SHEET
HO RTR 55 F-100 Panel Truck - Police/Black
MODEL FEATURES:
- Ford licensed model
- Factory assembled with detail parts applied
- Molded cab interior with separately applied steering wheel
- Clear window glazing
- Rubber tires
Tru Color Paint - Acrylic - Ontario Northland Light Blue - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
Enamel Pigment Fixer - 35mL
High quality pigment fixer for modeling!
Recommended product to adhere pigments to the surfaces of your models and bases. Use capillary effect to allow fluid to flow over pigment powder. Once dried, pigments are permanently adhered to the surface and return to dry color!
N Procor 5820 Covered Hopper - UNPX - No Procor Logo #123590
The Rapido Trains N scale Procor 5820 cu ft Covered Hopper features:
Three styles of roof hatches: round, round with ribs and 20 inch vented cover
Two styles of outlet gates: pneumatic and Miner
Etched walkways
Spare hatches included in polybag to let modeler modify for different era
Full end cage details
Accurate paint and lettering
Multiple road numbers available for each scheme
Dry Transfer Decals - Black Roman Numbers
Font sizes: 1/16, 3/32, 1/8, 3/16 inch (1.58, 2.38, 3.17, 4.76 mm)
One sheet: 4 x 5 inches (10.1 x 12.7 cm)
HO Procor 20,000 Gallon General Purpose Tank Car - Turbo Resources - CGTX / Era: 1976+ - #20276
The Rapido Trains HO scale Procor GP20 Tank Car features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Photo-etched metal walkways
Detailed vent stacks, loading hatches, air tanks and braking equipment
Metal knuckle couplers
Early style features 70-ton trucks with 33in wheels and an exposed drain valve
Late style features 100-ton trucks with 36in wheels and a reinforced drain valve housing
Introducing the all new N scale Pacific Car & Foundry B-100-40 boxcar from Rapido Trains Inc!
With 250 cars delivered exclusively to the Southern Pacific in 1976, these exterior-post boxcars featured a 5195-cu ft capacity, full Hydra-Cushion underframe, 12ft doors, Car Pac loaders and the iconic half-height waffle sides. Used across the SP system, these utilitarian boxcars could be seen throughout the USA and Canada. Most of the series are still in service today, many for SP successor Union Pacific and others in short line service.
Several cars from this series were purchased from the SP by Amtrak in the mid-1990s for use in express service on most trains across the system. These cars had some minor modifications including the large wheel door handle, brackets for the end of train device and struts added to the trucks for extra stability at higher speeds.
Rapido?s N Scale B-100-40 model features:
Separately applied cut levers and end ladders
Detailed Hydra-Cushion underframe
Full underbody brake rigging
Separately applied door latch mechanism
Accurate paint and lettering
Road number specific paint patches where appropriate
N Scale Short Barrel Ore Hopper - CN Scale Test Car #52284
The Rapido Trains N scale NSC Barrel ore hopper features:
Two different car bodies representing short and long barrel hoppers
Super-detailed underbody including all separate air and brake piping
Correct 100-ton Barber S-2 Trucks with metal wheels
Highly detailed hopper gates and underbody detail
Different end platform equipment between long and short cars
See-through, etched metal end platforms
HO Silver Series - ALCo S2 - Standard DC - Canadian National #8139
Built by the American Locomotive Company (Alco) the low-hood S-2 was introduced in 1940 to replace Alco?s earlier high-hood switchers. The 1000 horsepower S-2 was a turbocharged version of the S-1. There were 1,502 S-2s sold to North American Railroads. The versatility of the S-2s was evidenced by their service on class 1 shortline and industrial railroads. Atlas? version is back in service, with new tooling, as well as a sound-equipped version for modeler enjoyment.
Features Include:
- NMRA 8-Pin Socket for DCC (Silver Series Model)
- Redesigned & retooled hood, cab & chassis
- The first plastic HO-scale model of an S-2 Locomotive to include accurate body panel details
- Option for horizontal or vertical radiator shutters
- Fine scale handrails
- Separately-applied grab irons, coupler cut levers, air hoses, piping, etc.
- Redesigned truck frames with separately applied detail
- Directional LED lighting (includes cab rear headlight)
- Die-cast chassis for improved pulling performance
- Chassis retooled for optional DCC/sound
- 5-pole skewed armature motor for reliable operation
- Dual-flywheels for maximum performance at all speeds
- Factory-equipped with AccuMate knuckle couplers
- Exceptional painting and printing
HO Scale 17,600 Gallon Tank Car - GATX (Service Driven) #4456
Features:
- Three separate styles of manway / platform / ladder arrangements (used as appropriate per road name)
- Fine scale railings
- Separately applied brake rigging
- Separately applied manway ?clamshell?-style cover (used when appropriate per road name)
- 100-Ton Roller Bearing Trucks
- Accurate painting and printing
- Full stand-alone brake system details
- Bottom outlet valve detail
- Stand-alone heater coil pipes
- Highly detailed body with prototypical jacket seams
- See-through top platform grating
- AccuMate couplers
Flat Brushable Acrylic - Brown - 1oz
Tru Color Flat Brushable Color Acrylic Paint is ideal for any model that requires a flat finish. Great for weathering and drybrushing, this solvent-based acrylic paint can be thinned using 709-15 Tru-Color Paint Thinner and drying time can be extended using 709-310 Retarder. Thinner can also be used to make Flat Brushable Color Acrylic Paints sprayable.
HO 1/87 New Look Bus (Deluxe) - Los Angeles SCRTD #1047
The Rapido Trains HO scale New Look Bus models features:
-Correct tubular profile traced from a 3D-scan of a real New Look Bus.
-Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
-Optional left-side emergency exit door and either single- or dual-stream rear doors
-Full interior including separate bench seats and grooved flooring.
-Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
-Steerable front wheels and REAL rubber tires.
-Three types of bumpers − steel, water and rubber.
-A wide variety of optional detail parts included.
-Separate advertisement frames included with each model.
-Pre-installed route destination signs for added realism.
-Working interior lights, headlights and tail lights.
-Installed as appropriate
A 9-12 volt DC power supply (not included) is required to power the lighting features.
HO 1/87 New Look Bus (Deluxe) - Long Island MSBA #671
The Rapido Trains HO scale New Look Bus models features:
-Correct tubular profile traced from a 3D-scan of a real New Look Bus.
-Era-correct rear engine door available in early (2nd generation) or late (4th generation) styles.
-Optional left-side emergency exit door and either single- or dual-stream rear doors
-Full interior including separate bench seats and grooved flooring.
-Etched-metal interior stanchions, stamped-metal handrails and separate farebox
and steering wheel parts installed.
-Steerable front wheels and REAL rubber tires.
-Three types of bumpers − steel, water and rubber.
-A wide variety of optional detail parts included.
-Separate advertisement frames included with each model.
-Pre-installed route destination signs for added realism.
-Working interior lights, headlights and tail lights.
-Installed as appropriate
A 9-12 volt DC power supply (not included) is required to power the lighting features.
HO Andrews (1898) Trucks w/33 Inch Ribbed Back Wheels (1 Pair)
Metal Fully Sprung Trucks Features:
- Ready-To-Mount #148 Metal Whisker Couplers
- Code 110 (.110) #523 33 inch Ribbed Back Wheels
- Accurate Markings
- Incredible Detail True to Prototype
- Non-Magnetic Metal Wheels
- Highly Flexible Sprung Trucks
- Metal Side-frames & Fully Sprung Bolster
- Smooth tracking Free Rolling Contoured Insulated Plastic Axles
- RP-25 Free Rolling Wheels
- #637 HO Scale Truck Springs
Package Includes:
- (2) Each #510 Andrews (1898) Trucks with Coupler Platform (assembled)
- (2) Each #148 Metal Whisker Couplers
- (2) Each Coupler Gearbox
- (2) Each 0-48 Screw
- (2) Each Insulated Bushing
- (2) Each #209 Gray Insulating Fiber Washers .010 inch
- (2) #622 Knuckle Springs
The Andrews truck is also a turn of the century design that was long lived. It represents one of the first steps in the development of the modern freight truck with its cast frame. The journal boxes are bolted to the main frame. This truck was used through the end of the 1950s although by that time was only used in lighter applications such as refrigerator cars. Andrews trucks are probably still used were logging railroads remain in operation.
PRLX ex Warbonnet #236
Expected in November 2020
Locomotive features:
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and –printed paint schemes
LED Lighting for realistic appearance
Coupler cut levers
MU hoses
Trainline hose
See through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Sound equipped models also feature:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
PRLX features:
All PRLX locomotives are Primed for Grime with road numberspecific patches and fading
Many of BNSFs SD75Ms were in storage by 2014-2015. The 20plus year old units were definately past their prime at this point, however, most of them still had a future. Norfolk Southern bought a total of seven units, to become NS 2800-2806. In addition, Progress Rail Leasing (PRLX) bought a large group of the units. They arrived to PRLX wearing several paint schemes, including the Santa Fe Warbonnet as well as BNSFs Heritage II paint. The units were hastily patched and placed into service, as of this writing they are leased to CN and KCS, but future leasing assignments are likely.
Primed for grime models feature:
Duplicated look and feel of -In Service- equipment, -Tattered and Torn- just like the real thing
Faded base colors matched to the prototype
Patches applied and shaped per roadnumber matching each corresponding side to the prototype
Perfect starting point for adding grime and rust
Round Brass Wire .012inch Diameter (HO Scale 3/4inch) pkg(4) 12inch long each
Ideal for modeling all types of pipes, railings, etc., brass wire is easily bent to fit your appliactions. Size is outside diameter in HO Scale inches, followed by actual dimensions.
HO Gunderson / Greenbrier 6276 50Ft Plate F Boxcar - FBOX #504995
Aurora Miniatures North America Inc. is pleased to offer a second run of the the Greenbrier / Gunderson 6276 cf 50ft Plate F Boxcar with single plug door in HO scale. From 2004 to present day, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. Most of these boxcars are assigned to paper service.
Series-Specific Features:
FBOX 504800-505199, TTX Class XGH52 built in 2004 by Gunderson-Concarril in Sahagun City, Hidalgo, Mexico.
Early version roof with all horizontal panels.
Early version carbody with tack boards.
Early version 12' plug door.
Early version underbody components arrangement, control valve mounted on same side as the air reservoir.
Barber S-2-HD-9C trucks.
Series-Specific Painting and Lettering:
Model depicts as-delivered appearance of the prototype boxcar.
TTX Black/White Speed Logo on upper right side of car.
Italic Railcar Pooling Experts slogan and website located below logo.
Next load, any road slogan and logo on upper left side of car.
English-only markings on door.
General Model Features:
The first and only HO scale model of this modern 50ft boxcar!
All-new model, meticulously designed from various prototype resources.
Highly detailed, injection-moulded plastic body with accurately shaped grid sides.
Separately applied ladders, handrails, door rods and track, air brake system components and piping, coupler cut levers and air hoses.
Near-scale size draft gear box with side detailing.
100-ton roller-bearing trucks with fully replicated bolster & center plate detail, side bearings and brake beams. Appropriate truck side frames per prototype.
NMRA RP-25, Code 110, machined metal 36 inch wheelsets featuring prototypical wheel contour and axle tapering.
Animated rotating roller-bearing caps.
AuroraJanney scale head couplers installed.
Precision painting and printing.
18 road numbers available for this paint scheme.
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.125 (10pcs pkg)
SubTerrain System Foam Accessories Adhesives
Perfect for securing Risers and Inclines from the Subterrain System, this adhesive works well on most materials, such as foam, cork, Homasote and wood. Its specially formulated to dry completely when applied between foam sections, unlike most common white glues. Great for gluing large sheets, or thin and narrow pieces, simply apply a bead and press together. By applying a bit of Foam Tack Glue to both surfaces and allowing them to dry for a few minutes, it can be used as a contact cement.
HO PROCOR 20,000 Gallon General Purpose Tank Car - Irving Oil - NCTX / Era: 1972+ - #22570
The Rapido Trains HO scale Procor GP20 Tank Car features:
Drawn from original blueprints and drawings
Artworks sourced from original design drawings and photos
Photo-etched metal walkways
Detailed vent stacks, loading hatches, air tanks and braking equipment
Metal knuckle couplers
Early style features 70-ton trucks with 33in wheels and an exposed drain valve
Late style features 100-ton trucks with 36in wheels and a reinforced drain valve housing
HO 73Ft Center Partition Car - Union Pacific #275189
Features:
Riserless Floor Design
Detailed stirrups
Simulated tie-loops
Ratchets
Partition cable hooks
22 wire grabs
Etched cross-over walks
Wire Brake Rods
Detailed Jack Pads
Newly Tooled 286k trucks
Detailed Pull Plates
See-Through Top Chord Holes
Simulated cable slots
Detailed lift plates
Prototypical lettering and markings
Recommended 22inch radius
MODEL FEATURES:
- Two GATX classes represented: 282-series and 486-series
- Finely detailed walkways
- Full underbody plumbing and rigging
- 100-ton roller-bearing trucks with rotating bearing caps
- Accurately painted and printed for prototypical realism
- Separate wireform grab irons, etched metal coupler platforms
- Body-mounted, McHenry operating scale knuckle couplers
- Full underframe detail: air brake reservoir, control valve, and brake cylinder with plumbing and brake rod details
- 36inch Machined metal wheels with RP25 contours operate on all popular brands of track
- Correct walkways, manways, and load/unload plaques per series
- Correct transfer plumbing per prototype series and end (A-end or B-end)
- Detailed, soft vinyl transfer hoses that bend as the car negotiates curves
- Fully-assembled and ready-to-run out of the box
- Highly-detailed, injection-molded body
- Coupler lift bars, trainline hoses, brake hoses, and hardware
- Minimum radius: 18inch - Recommended radius: 22inch
- 282-series era: 1977 to present
- 486-series era: 1982 to present
HO GP38 Gold - DCC Sound - NORFOLK WESTERN #4127
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate? knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
AccuMate? couplers are made under license from AccuRail, Inc.
Sound Features for Gold Series :
(DCC Operation)
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F31 .
Follows all NMRA DCC standards and recommended practices
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes ?on the fly? are provided for true realism
HO Brake Gear Sets - Hand Brake & Valve (2pk)
Concrete Segmental Bridge Set A, One Complete Bridge - Plastic Kit
Ends & Segments
Expand with Set B #4391
Era: 1970s+
Found across the United States, Modern Concrete Segmental Bridges have replaced literally thousands of aging wooden or early concrete styles of the past.
Featuring generic parts and easy construction, railroads across the country have been using this bridge style for decades due to its low cost, expandability, ease of maintenance, and durability.
Model Description:
Our model faithfully recreates the prototype down to small details like bolt heads! Featuring the same expandability as the prototype, this product is available in two sets:
- Set (A) with (2) two ends and (3) three segments.
- Set (B) with (3) three additional segments.
Dimensions:
- Length (Set A - End to End): 6.85inch (scale 50 feet)
- Width (Trackbed): 1.80inch (scale 13 feet)
- Width (Outside): 2.63inch (scale 19 feet)
- Segment Length: 1.92inch (scale 14 feet)
- Height (floor to bottom): 1.15inch (scale 8.3 feet)
Model Features:
Features:
- Easy to Assemble!
- Injection-Molded Plastic
- Light Gray Concrete Color
- Perfect for 1970+
- Ultra-Common Design
- Extremely Accurate Detail
- Fine-Scale Handrails
12 inch Long Round Music Wire - 0.032inch Diameter pkg(4)
Round Music Wire - package of 4
Outside Diameter: 0.032inch
N Scale Kaolin Tank Car - ACFX #71928
Features:
100-ton roller-bearing trucks
Separate safety bars
Accurate painting and lettering
AccuMate couplers
AccuMate couplers are made under license from AccuRail, Inc
N Procor 5820 Covered Hopper - UNPX - Procor Blue Solid #122770
The Rapido Trains N scale Procor 5820 cu ft Covered Hopper features:
Three styles of roof hatches: round, round with ribs and 20 inch vented cover
Two styles of outlet gates: pneumatic and Miner
Etched walkways
Spare hatches included in polybag to let modeler modify for different era
Full end cage details
Accurate paint and lettering
Multiple road numbers available for each scheme
HO Alco RS3-M Chop Nose - DCC & Sound - Delaware & Hudson: Bi Centennial #506
Photo courtesy Mike Herman Family
Delivery Expected Early 2024
Details:
RS-3 units #4115, #4106, #4107, #4113, #4122, #4112, #4119, and #4128 were rebuilt by Morrison Knudsen into RS-3m units (numbered #501-508, respectively) between December of 1975 and March of 1976. The locomotives were re-engined with the 2,000 horsepower ALCo 12-cylinder 251C engine, and the long hood was raised six inches to accommodate the larger engine. The dynamic brakes were also moved to a box behind the cab.
HO Flexible Textured Freight Car Load Sheets - Medium Stone Rip Rap
Product Information
Add realistic loads to open freight cars or trucks (sold separately) with these unique loads from Chooch Enterprises. Molded in flexible vinyl thats easily cut to fit with scissors or hobby knife, each features realistic texture and surface detail, and can be finished with most acrylic paints (sold separately) for added realism.
Measures: 11-1/2 x 3-1/2inch (29.2 x 8.8cm)
HP-BCS Airbrush - Value Set
Iwata Eclipse Series airbrushes are known for their versatility. Eclipses high flow allows it to atomize a wider variety of liquids with less need for reducing or thinning. Eclipse Series offers a broad spray range, as compared to other airbrushes, where it is possible to achieve a controlled fine line to controlled wide spray.
Iwata Eclipse HP-BCS Siphon Feed Dual Action Airbrush comes with a 2 oz bottle and is a great choice for those who intend to use a larger volume of spray medium. One of the benefits of siphon feed airbrushes is that you can purchase additional bottles and prefill them with your favorite colors. This allows you to achieve quick color changes.
Iwata Eclipse Series airbrushes feature an exclusive Compression Fit Nozzle that is easy to clean and assemble. The Quick-Flush Cutaway Handle allows easy access to the Needle so that you can quickly empty the paint reservoir for cleaning. Iwatas Spring-Steel Needle resists breakage and our needle packings are solvent resistant for longevity. Iwata Eclipse airbrushes come with an Eclipse Head Cap Spanner that is used to remove the Head Cap when accessing the Nozzle. Also included is Iwata Lube, which is used to lubricate the Needle and Main Lever mechanism. Hugely popular, Iwata Eclipse Series airbrushes offer all-star versatility.
Set includes Iwata Airbrush Hose, Medea Airbrush Cleaner, Com-Art Acrylic Colour in Opaque Ultramarine, and Airbrush Users Guide.
HO Scale H1b Hudson Steam - DCC & Sound - Canadian Pacific (Beaver Shield) #2807
-Late walkway w/smoke deflectors
Designed by Chief of Motive Power & Rolling Stock Henry Blane Bowen, Canadian Pacifics H1a and H1b class
4-6-4 Hudson locos were state-of-the-art steam power when delivered. A total of twenty locos were delivered
in two batches of ten each. The first batch, numbers #2800-2809, were delivered in 1929 and classified H1a. The second ten, numbers #2810-2819, were delivered in 1930 and were classified H1b. These locomotives were used on mainline passenger trains across the CPs system. So successful were they that CP used their design as the basis for its -Royal Hudsons- seven years later, which were designated as class H1c through H1d. Both classes survived intact until the end of steam, with the first retirements not coming until 1957.
Rapidos H1a/b HO scale models are based on our hugely successful Royal Hudson. We are offering several
different detail variations which allow you to model these locos at any point throughout their service life,
including the preserved #2816.
Features include:
Designed from prototype drawings and measurements
Road number specific factory applied details for each unit
Separately applied metal hand rails and grabs
Blackened wheels and driving rods
Correct cylinders and valve gear
Smooth-running drive train
Accurate and complete piping, under body and tender details
Correct coal tenders for regular service units
Correct oil tender for the post-restoration version of #2816
Early or later style walkways
-Elephant Ear- smoke deflectors on correctly numbered models
-Flickering- fire box in detailed cab (DCC controlled)
Working head light, classification lights, interior cab light and back up lights (DCC controlled)
Metal Macdonald-Cartier Knuckle Couplers mounted at correct height
DCC sound version includes synchronized chuff, accurate whistles, bells, air pumps, generator,
safety valves and many other effects! (Not all sound features of DCC sound units will function
in DC mode)
Accurate paint and decoration
22inch Minimum radius
HO Custom Line Code 83 - #6 Right Hand Turnout
Custom-Line Turnouts are prototypically accurate, featuring blackened metal frogs and rivetless switch points that provide superior electrical conductivity. These turnouts can be powered using an under-table switch machine or standard remote and manual code 83 switch machines. All Custom-Line Turnouts have the same geometry as the current Atlas code 100 versions, for drop-in installation in Atlas and other layout plans.
Please note that you cannot substitute a Custom-Line for a Snap-Switch as their geometries are different.
HO Central Air Conditioner Unit - Kit (3pk)
Use for larger commercial or residential units. Kit includes 3 each laser-cut adhesive backed laser-board and basswood air conditioner units. Easy to assemble tab and slot construction and most of the parts are peel-n-stick. Parts are laid out on carrier sheet by paint color for easy painting.
HO Scale Thrall 53Ft Articulated Well Car Set - TTX (Blue Ex-BRAN) #888685 (3pkg)
Features:
Each car consists of three wells--A,B & C.
Walkway variants specific to prototype
Etched metal detailing
Detailed air reservoirs
Detailed brake valves
Sharp hand grabs and stirrups
Runs on 18inch radius
Recommended for 22inch radius
Floor pin holes for Atlas and other brands of containers
Product Information
When the domestic intermodal container market settled out in the late 90s, the 53Ft long container emerged the winner. Car builders responded with new wells of like size to accommodate the new standard. Introduced in series service in early 2000, Thralls triple 53Ft articulated well car was certainly the best looking of the 53Ft wells. Angular wheel cutouts, 3 flared-bottom wide and 8 narrow side posts give this intermodal age well car character.
HO NSC 60ft Ingot Flat Car - HPJX National Steel Car
THE LOAD IS INCLUDED!
AN OTTER VALLEY EXCLUSIVE!!
Description:
Handles the movement of Ingot loads
Era - 2013 to Present
Model Features:
Accurate floor tie downs with ingot loads
Re-inforced ends and prototypical flooring
Correct size air reservoir and brake levers in release position
Metal wheels and kadee knuckle coupler
Coupler Cut bars and correct air hoses
All new model designed up using industry sources, and field measurements
Separately applied ladders,
Fully detailed underbody
Near-scale size draft gear box with specialized cushion detail
Crisp painting and lettering per prototype.
Rotating wheel caps, with appropriate Bremco or Timken where appropriate
Empty/load equipment full detail
HO 85ft ACF Dome Diner Coach - Union Pacific (Missouri River Eagle) #7011
Heritage Fleet (Armour Yellow, Gray, Red)
A key part of Union Pacifics public relations programs, 48 historic passenger cars, three restored steam locomotives and an A-B-A set of E9 diesels make up the famed Heritage Fleet. Many were originally purchased for the City Streamliners, and have been carefully restored and updated to full operating condition. Today, the cars and E9s are finished in a modern Armour Yellow scheme, and the cars carry names of important cities, famous trains and key people in the railroads long history. In service, these rolling goodwill ambassadors travel system-wide and beyond, to attend a wide range of public and special events every year.
-Perfect for fan trip and excursion service
-Modern-Era UP excursion scheme
-Factory-Printed Car Names and UPP reporting marks
-Factory-installed grab irons
-Prototypically accurate window tinting
-Proto MAX(TM) metal knuckle couplers
PLEASE NOTE: As these cars are the correct prototype length and feature full underbody detail to match the prototypes, a minimum 24in radius is recommended for operation.
UPP 7011 Missouri River Eagle was built as UP Dome Coach 7011 in November 1958 and is named for the Missouri Pacific train serving St. Louis and Omaha from 1940 to 1971, MPs first and last diesel-powered streamliner.
Rooftop Details Set - Unpainted Castings
HO 50Ft FMC 5077 Double Door Box - Southern Pacific SP #246084
MODEL FEATURES:
Separately applied grab irons, end ladders and brake wheel
Photo-etched cross-over platform
33inch machined metal wheels with RP25 contours
Weighted for optimum performance
Body-mounted McHenry operating scale knuckle couplers
Highly-detailed, injection-molded body
Painted and printed for realistic decoration
Minimum radius: 18inch
HO RTR ACF 4650 3-Bay Hopper - Norfolk & Western #171077
Date: NEW 6-74
This InterMountain Railway Co. ready-to-run HO Scale ACF 4650 Cubic Foot 3-Bay Covered Hopper features a detailed injection-molded body, etched-metal parts where appropriate, fine decoration, appropriate trucks with InterMountain metal wheelsets and magnetic knuckle couplers. The ACF 4650 Cubic Foot 3-Bay Covered Hopper will look great as part of your 1960s and later freight consists.
1952 Ford/Cab Over Engine/Refrigerated Truck - Unpainted and Resin Cast Kit
HO Greenville 86Ft Double Plug Door Box Car - Ann Arbor (Delivery 1978) #10013
Product: Greenville 86Ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Ann Arbor (AA) -Delivery 1978- offers one of the most distinctive railroad logos to come out of the 1970s: the Ann Arbor -Ferry in the Fog.- Built in November of 1978, this group of 20 cars represents the final Greenville 86Ft boxcars built. They were leased by the Michigan Interstate, who operated the State of Michigan-owned Ann Arbor at this time. The cars worked out of Fords Saline, Michigan plant, carrying chrome and trim parts around to Ford assembly plants and parts warehouses. These Tangent models feature an accurate late-Greenville body with 5 grab irons on the left and right sides of the car. The car is equipped with body-mounted brake rigging hanging down from the underframe and 100-Ton trucks with rotating Timken roller bearing caps, just like the prototype. The Freightmaster End-Of-Car Cushioning details really pop, since Ann Arbor painted the face of the striker orange, a detail we were very diligent to duplicate. The Ann Arbor Railroad System lettering is carefully replicated on this model, from the big Ann Arbor Ferry Boat down to the small black and white assignment stencils.
HO EMD GP40 - DCC Ready - Canadian National (Large Noodle) #4014
1967+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Street Accessories
This set includes, six parking meters, manhole covers, fire hydrants, trash cans, resting benches, street corner mailbox, a vintage folding-door telephone booth and a woman rummaging in her purse for some change.
Set contains 18 pieces. Colors may vary from actual product.
HO Procor 3000CuFt Aluminum Hopper w/o Handrails - UNPX/No Wordmark #127428
The Procor Sodium Chlorate Covered Hopper features:
Correct outlet gates with sparger fittings
Etched roof walks and end walkways
Separate roofwalk handrails as appropriate
Separate grab irons installed at the factory
Full end cage details
All-new 100-ton Ride Control trucks with HydraShox integrated hydraulic snubbers
Etched placards included in polybag
Accurate paint and lettering
Multiple road numbers available for each variation
Available in singles or multi-packs
HO GMD SD40-2W - DC/DCC Ready - CNNA (Non Dynamic Map/ Oper. Strobe Lites) #5362
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
2-11/32 inch Vertical Railing (2pcs)
Use for hand rails, stair rails, roof trusses, grating and other steel structures. Precision Injection Molded in Styrene Plastic. May also be used for trellises, fencing window bars, etc.
SCALE
ALL
MATERIAL
STYRENE
COLOR
VARIOUS
HEIGHT IN INCHES
2-11/32
HEIGHT IN MM
59.5mm
WIDTH IN INCHES
1/4
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
.085
THICKNESSS IN MM
2.2mm
LENGTH IN INCHES
5
LENGTH IN MM
125mm
HO 30ft Galvanized Steel Grain Bin - Kit
(Narrow - 2.66 inch Corrugation)
Corrugated steel grain bins are a staple in any agricultural setting, placed on farms, elevators, industries, and beside railroad tracks. Used with a variety of farm commodities, these bins provide a safe, dry place to store that commodity until it goes to market.
With several styles to choose from, these grain bins will look right at home on your layout. They feature prototypical corrugations, realistic galvanized steel appearance, various side sheet heights, and a variety of diameters.
Narrow corrugation bins have corrugations spaced a scale 2.66 inches and the rings are 32 inches tall. Wide corrugation bins have corrugations spaced 4 inches apart with 44 inch tall rings.
All bins are easy to assemble - just stack the rings, glue them together, attach the roof and you are done! Every ring comes as one solid piece, so no time consuming and messy assembly of individual side sheet pieces to create each ring, saving you time and frustration!
What size bin will fit your space? Try our grain bin size calculator or printable template.
https://www.iascaled.com/store/GrainBinSizeCalculators
https://iascaled.com/docs/ho-bin/GBM-HO.pdf
HO 40ft Fruehauf Trailer - Penn Central #295532
Era: 1971-1990, 1991-2009, 2010-Present Day
MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- 2 or 4 door rods per prototype
- Wheeled or shoe-style landing gear per prototype
- Fully-assembled and ready to use out of the box
- Highly-detailed, injection-molded body
HO Greenville 86ft Double Plug Door Box Car - Missouri Pacific #271650
Product: Greenville 86ft Double Plug Door Box Car
Scale: HO Scale 1:87.1
Truck: Tangent 100-Ton -Low Profile- Barber S-2-C Roller Bearing
Wheels: CNC-Machined 36inch Wheels
Release Date: August 2021
Missouri Pacific (MP) -Original 1968- represents another frequently-requested paint scheme! MP ordered five different lots of Greenville auto parts box cars, and this lot was the largest at 157 units. The prototypes were delivered with MP -buzzsaw- logos on the right side of the car, and economical -Cushion Car- lettering on the left. Of course, as any self-respecting MP modeler will tell you, there is so much more to MP lettering than slapping a buzzsaw on the car. Tangents industry-leading artwork has duplicated the distinctive and intricate MP lettering style from the reporting marks down to the smallest stencils. The cars offered in this run were assigned to Fords Chicago Stamping Pool, resulting in an accurate Chicago Heights, Illinois return route stencil. Center-of-Car Cushioning draft gear detail variation with yellow end handles? Check. Distinctive Klasing 1150 hand brake? Check. Accurate Apex crossover platforms? Check. 100-Ton -Low Profile- Barber S-2-C Roller Bearing Trucks with 36inch wheels and rotating Timken caps? Check, check and check! These cars lasted in original paint into the late 1980s and went everywhere. Our models are available with your choice of six road numbers, with three cars showing 8-68 build dates and three cars showing 9-68 build dates. Collect all six while you can!
N Scale 50Ft NACC Box - Delaware & Hudson D&H #28037
MODEL FEATURES:
Three road numbers
Etched metal stirrup steps
Detailed, molded underframe
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
N-scale 70 ton trucks
Machined 33inch metal wheels
Body mounted McHenry operating scale knuckle couplers
Weighted for optimum performance
Minimum radius: 9 3/4inch
HO ET44 Tier 4 - DCC Equipped - CN Heritage/Illinois Central #3008
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO EMD FT A+B Set - DC/DCC/Sound - Great Northern (GN As Delivered) #402-A + 402-B
Rapidos New FT Features:
-Close-coupling system for great appearance on straights and curves
-Drawbar or coupler connections between A and B units
-Multiple styles of number boards, installed as appropriate
Correct nose and windshield contours
Three styles of dynamic brake hatch, installed as appropriate
Steam generator hatch installed as appropriate
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
-Working headlights, ground lights, number boards and back-up lights
-Full underbody details including piping and draft gear
Separate grab irons and handrails
-Numerous road-specific details
Full, multi-color interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) options
Accurate sounds
-For the first time ever in plastic!
Rapidos all-new HO scale FT locomotive models have many features never offered before in an FT model. These include a close coupling system to keep the A and B units close together on straights, yet still allow operation on model railroad curves. Units can be coupled with either a drawbar connection or couplers, mimicking the prototype. Three versions of dynamic brake hatch will be offered. Three- and four-digit lighted number boards will also be produced. Many road-specific details will be made including different nose door arrangements, unique pilot and truck details, as well as rebuilt number boards. Full underbody details will be offered, including the massive coupler draft gear at each end of each A+B Set. A complete cab interior rounds off the model.
Power will be provided by Rapidos proven five-pole motor with dual flywheels, backed up with our MoPower capacitor system for uninterrupted operation. All models will be DCC-ready, and sound-equipped models will feature ESU V5 decoders and full lighting effects as appropriate.
HO RTR 70 Ton 2-Ballast Hopper with Side Chutes - GTWI
#85661
Ready to Run.
Features: Crisp details and sharp painting and printing, metal wheels and knuckle couplers.
Built-&-Ready Landmark Structures - Deuces Bike Shop
Assembled - 5 x 6 inches (12.7 x 15.2cm)
Spice up the seedy side of your layout town with historical flare. This fully assembled structure represents a nostalgic easy rider setting with incredible detail. Exterior details include a weathered metal roof and siding, signs and decals, an old pop machine and a fenced yard loaded with a junkyard dog, old bike parts and other details.
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - Middle CWSX #140089
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Knuckle coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO Through Plate-Girder Bridge - Kit (Single or Double)
FEATURES:
- One of the most common North American railroad bridge designs
- Fits steam, diesel and modern eras
- Used to cross short distances of about 30 to 100Ft (9.1 to 30.4m)
- Includes parts to build as a single or double-track bridge
- Easily added to new or existing scenery
- Authentic rivets and other details
- Molded in dark gray plastic
As shown the Through Plate-Girder Bridge is 6 inches long and can be built several tracks wide by combining kits.
FEATURES:
-fully assembled and factory finished
-accurate Z-brace side posts or Hat channel ribs
-factory installed grab irons
-fully detailed underbody
-correct era-specific trucks
-magnetic metal knuckle couplers at the correct height and painted
-free-rolling turned metal wheelsets
-full interior detail
-positionable drop ends
High Self Adhesive Lavender Tuft Strips - 6mm (10 strips)
10 6mm high self adhesive lavender tuft strips, each approximately 130mm long, to stick down wherever required on your layout or diorama.
HO GE ES44AC GEVO - ESU Sound & DCC - Canadian Pacific #8910
FEATURES:
One time run of these roadnumbers, order now - limited quantity available
The most popular prototype diesel in North America
Thousands in service from 2003 to the present
ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
- Multiple realistic lighting effects
21-pin DCC plug
2- or 4-vent dynamic brake vent as appropriate
Easily handles 18 inch radius curves (22 inch or larger recommended)
Six powered axles per unit
LED Lighting includes:
- Correct headlight position per prototype
- Working front ditch lights
Three truck styles to match prototypes:
- Standard high-adhesion
- Steerable (nonworking)
- C4 A1A center idler axle
Same powerful drive as WalthersProto(R) locos featuring:
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Dual machined brass flywheels
- Heavy die-cast metal chassis
- Constant and directional LED lights
Correct profile radiator grilles and rooftop walkway surface details
Molded drill starter points for grab irons - easily added with the GE ES44 Evolution Series Diesel Detail Kit (910-250, sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Fully assembled
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
N Scale Graffiti Decal Set - Contemporary Graffiti Set #3 - Waterslide Decals
Tangent Scale Models PS4750 Covered Hopper- MKT- Original 12-1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
MKT Original 12-1979 in the eye-catching green scheme with the large yellow MKT painted on the flanks of the car. Like our BN models, the Tangent PS4750 is the only model on the market to match MKTs one and only order of PS4750s, from the jacking pads, brake system, roof hatches, etc. Check out the prototypical Ellcon-National Peacock D-1600 hand brake and the Brenco-3 style rotating roller bearing caps!
5/16 inch OD Round Brass Tube 0.014inch Thick x 12inch Long
Round Brass Tube 0.014inch Wall thickness x 12inch Long (1 pc)
Outside Diameter: 5/16 inch
HO 50ft Evans Cushion Coil Car - DT&I #1165
Designed to speed loading and unloading while protecting large steel coils in transit, the Walthers Proto(R) 50ft Evans Cushion Coil Car is a great way to add steel traffic to any HO layout. These cars feature updated tooling with removable angled, round or glass fiber hoods.
Additional features include:
- One time run of these road numbers, limited quantity available - order now!
- Based on cars in service 1970s to early 2000s
- Prototypes carry larger steel coils used to make automobiles, appliances and food packaging
- Matching, removable hoods in angled, round and glass fiber styles with lifting and stacking brackets
- Fully assembled with etched metal walkways, grab irons, underframe cushioning device, separate brake gear, and more!
- Detailed body with V-shaped load cradle and separate restraints
- Heavy die-cast metal frame for enhanced performance
- 100-ton roller-bearing trucks
- Correct 36 inch RP-25 metal wheelsets
- Proto MAX(TM) metal knuckle couplers
- Detail your new coil cars in minutes with the Cornerstone Steel Coil Load (#933-1499), sold separately)
- Great for use with Walthers Steel and Auto Industry Series!
HO Pullman Standard (PS) - White Covered Hopper Data - 4750 cu ft - Decals
Scale: HO Scale
Equipment Type: Data (White)
Description: Pullman Standard (PS) - Data - White - Covered Hopper Data - 4750 cu ft - HO Scale
N Scale AutoFlood III RD Coal Hopper - CEFX #600593
The Rapido Trains N scale AutoFlood III Rapid Discharge Coal Hopper features:
Die-cast frame and floor for optimum car weight
Full interior rivet and K-member details
Super-detailed end cages including air and brake piping
Barber S-2 100-ton Trucks with metal wheels
Hopper bays feature highly-detailed outlet gates
Separately applied end cross-over platforms
Separately applied uncoupling levers
Accurate paint and lettering
Removable coal load included
Multiple road numbers available for each scheme
Available in singles or multi-packs
HO EMD SD9 - DCC & Sound - Chicago, Burlington & Quincy #831
-yellow frame
Chicago, Burlington & Quincy
- Phase IV (First time for a plastic model!)
- Higher short hood with a corresponding cab height
- Cornered-off section on the long hood behind the cab
- Two 48inch radiator fans as opposed to the normal (four) 36inch fans
- Conduit pipes were removed from the top of the radiator
- No ladders on the short hood end
The Rapido Trains HO scale EMD SD7, SD9 and SD10 Locomotive features:
Measured from a living SD9
Road-specific details for each model variant
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND beacons (where appropriate).
Highly detailed cab interior
Correct fuel and water tank arrangements per road
Multiple styles of stepwells
See-through, etched steps
High short hood and modified -chopped- short hood where appropriate
Appropriate cab or nose headlights
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
And much, much more!
HO RTR 68Ft Railgon Gondola - CSXT #491028
Product Information
Modernize your HO freight operations in minutes with the WalthersMainline 68Ft Railgon Gondola! Introduced as a replacement for older 50Ft cars in the Railgon and many railroad fleets, this layout-ready model features:
One time run of these road numbers, order now - limited quantity available!
Prototypes in service from 2010 to the present with TTX and railroad owners
Used to carry all types of finished steel products, scrap and similar bulk loads
Authentic prototype details include:
-See-through square load tie-downs along top chord
-17-rib sidewalls
-Straight sill
Detailed brake gear
100-ton trucks with correct 36inch turned metal RP-25 wheels
Proto MAX(TM) metal knuckle couplers
1/8In Fluorescent Blue Rod (7pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
BLUE
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
Star Wars Blue Squadron Resistance X Wing Fighter Model Kit
1-72 Scale Model Kit
- Includes two sticker options and two canopies
- Wings open and close
- Adjustable style canopy and seated pilot
- Laser effect
- Landing gear
- No Glue Required
- Made in Japan
HO CSX Diesels (1989-2002) Diesel - Blue, Grey, & Yellow Scheme - Decals
Circa: 1989-02
Scale: HO Scale
Equipment Type: Diesel - Blue, Grey, & Yellow Scheme (YN2)
Description: CSX Diesels (1989-2002) -Diesel - Blue, Grey, & Yellow Scheme- - Waterslide Decal - HO Scale
Intermountain Railway Company 14-Panel Coalporter(R) Coal Gondola Mitsui Rail Capital MBKX (silver, blue)
#301020
HO PC&F 5241 CUFT - Boxcar - Olympic Railroad (OLYR) - Single Car #74814
Accurately scaled from prototype measurements and photos
Three door styles
Full underbody detail
Separate wire grab irons
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
HO Alco FA-1 - DCC & Sound - Canadian Pacific (Script Scheme) #4025
Rapidos new HO scale FA-1 and FB-1 feature:
Correct nose and windshield contours
Flat or angled number boards as appropriate
Dynamic and non-dynamic brake versions
Air- or water-cooled turbo exhaust stacks
Etched side and fan screens
Heavy, die-cast chassis
5-pole motor with dual flywheels
Operating headlights, class lights and back-up lights
Full underbody piping and conduit
Separate free-standing grab irons and handrails
Many railroad-specific details installed or included
Full, multi-color cab interior
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (featuring ESU LokSound) options
Accurate sounds
HO GMD SD40-2 - DCC & Sound - CP Rail #5867
Plows Both ends
Expected Delivery: December 2023
Ready To Run with Locomotive specific details.
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers.
Analog (DC) version features 21 pin plug for DCC, DCC with Sound version features LokSound V5 decoder.
HO MLW M630 - DCC & Sound - CP Rail (Multimark) #4508
8inch stripe w/ water expansion tank and ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
Athearn HO GP7/9 Set Blomberg B Assy (4)
HO Gunderson 6276 50Ft Plate F Boxcar - Illinois Central IC #21018
Aurora Miniatures is pleased to offer the Gunderson (Greenbrier) 6276 cf 50Ft Plate F Boxcar with single 12Ft plug door in HO scale, in multiple road name and era specific detail variations.
From 2004 onwards, thousands of these cars were built by The Greenbrier Companies at its various facilities across the United States and Mexico. It is an excellent representation and proof of the 50Ft boxcars continued existence in 21st century railroading. Most of these boxcars can be seen in paper service across the North American continent.
First Run: Late production (2016+) version in 6 paint schemes.
Formed Wire Grab Irons - 18in Drop Type (100pcs)
Weathering Powder 1oz (29.6ml) - Dark Gray
SD45-2 - DCC/Sound - CSX (Solid Grey) #8951
Detailed Information
NEW FEATURES:
•All-new LED lighting
•Rubber MU hoses for durability
•Models equipped with DCC+Sound will have the new 645E3 20-cylinder prime mover recording by SoundTraxx
The effort continues to enhance Athearn Genesis models per customer requests and feedback. There has been a lot of activity behind the scenes; we are excited to include new features often requested, to the SD45-2 and upcoming Genesis models.
CSX FEATURES:
•EMD large style snow plow
•Firecracker antenna
•Leslie RS5L horn air horn
•Nose mounted headlight
•Small anticlimber
•Chickenwire radiator grilles
LOCOMOTIVE FEATURES:
•Safety tread on walkways
•Fine-scale handrails for scale appearance
•Factory applied wire grab irons
•Windshield wipers
•See through cab windows
•Detailed and painted cab interior
•Sliding side cab windows
•Metal lift rings
•Fully-assembled and ready-to-run
•DCC-ready features Quick Plug plug-and-play technology with a 21-pin NEM connector
•Scaled from prototype resources including drawings, photographs, and more
•Accurately painted and printed paint schemes
•Body mounted McHenry operating scale knuckle couplers
•Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
•All-wheel drive with precision gears for smooth and quiet operation
•All-wheel electrical pickup provides reliable current flow
•Wheels with RP25 contours operate on all popular brands of track
•New LEDs for trouble free operation
•Bi-directional constant lighting so headlight brightness remains constant
•Heavy die-cast frame for greater traction and more pulling power
•Packaging securely holds for the model for safe storage
•Minimum radius: 18in
•Recommended radius: 22in
SOUND EQUIPPED MODELS ALSO FEATURE:
•Onboard DCC decoder with SoundTraxx Tsunami2
•Sound units operate in both DC and DCC
•Some functions are limited in DC
•Engine, horn, and bell sounds work in DC
•All functions NMRA compatible in DCC mode
•Slow speed control
•Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
•Many functions can be altered via Configuration Value (CV) changes
•CV chart included in operators manual
PROTOTYPE INFO:
The SD45-2 was an initial success; it was a complete improvement or upgrade as part of EMDs Dash 2 line; it had little to almost absolutely no flaws during the early stages of production and during the models official introduction. It was both popular and compatible with the original SD45 as well, with its large 20-cylinder engine. The SD45-2 lasted somewhat longer than most SD45 units on various owners rosters.
HO GMD-1 - DCC & Sound - Canadian National (1900s Green) #1912
In this release, Rapido is featuring two of the most requested versions of their GMD-1: the four-axle original 1900-series as well as the 1400-series rebuilds, each available in a variety of accurate paint schemes.
The Rapido GMD-1 Fourth Run features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Flexicoil trucks
Separate grab irons
Accurate sounds for both original and rebuilt units
Working ditch lights on 1400 series locomotive
Front and rear plows or pilot footboards where appropriate
Minimum 18inch curve radius recommended
DCC/Sound equipped units feature ESU V5 decoders
N Scale Straight Track - 7-5/16 inches (4pk)
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
Scenic Accents(R) - Animal Figurines - Yorkshire Pigs (12/pkg)
HO NSC 64 Ft 6400 CuFt Scrap and Trash Gondola - TROX #3532
AN OTTER VALLEY EXCLUSIVE!!
Description:
The NSC 64Ft Gondola is used mainly in the construction and waste disposal industries hauling waste to transfer sites. Additional users use it for light to medium density steel and other scrapping materials from scrapper/ shrearer to end user. Cars can be seen found all over North America in either unit train or manifest train service.
Era: Post 2000
Model Features:
- Accurate ends and sloting based on field measurements.
- Different offset slots for 7 rung and 8 rung ladder cars
- All new model designed up using industry sources, and field measurements
- Correct size air reservoir and brake levers in -release- position
- Metal wheels
- Coupler Cut bars and correct air hoses
- Kadee scale coupler
- Separately applied ladders,
- Fully detailed underbody
- Near-scale size draft gear box with specialized cushion detail
- Crisp painting and lettering per prototype.
- Rotating roller-bearing wheel caps, with appropriate Bremco or Timken where appropriate
HO GP38 Gold - DCC Sound - NORFOLK WESTERN #4108
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate? knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
AccuMate? couplers are made under license from AccuRail, Inc.
Sound Features for Gold Series :
(DCC Operation)
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F31 .
Follows all NMRA DCC standards and recommended practices
Sound Functionality Features:
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes ?on the fly? are provided for true realism
HO GMD SD40-2W - DC/DCC Ready - CNNA (Map) #5338
Ready To Run with Locomotive specific details. Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, road name specific details, roadname specific fuel tanks, can motor, flywheels, nickel silver wheels with RP25 flanges and knuckle couplers. Analog (DC) version features 21 pin plug for DCC
New Lighting: Operating Headlight, Rear Light Ditch Lights, Class Lights, Stepwell Lights, Walkway Lights, Track Inspection Light
CN CLASS GF-30T DETAILS: Dynamic Brakes, T-Shaped Winterization Hatch, Ditch Lights, Standard Cooling Fans, Chicken Wire Grills, Snow Shields, Non Silenced Exhaust Stack, Class Lights
CN CLASS GF-30U DETAILS: Corrugated Grills, Delivered Non-Dynamic Some Had Dynamics added Later, Q-Fans, Exhaust Silencer, Snow Shields, Standard Winterization Hatch, Ditch Lights, Class Lights
HO 30-Series Plastic Couplers w/Gearboxes - Medium (9/32in) Overset Shank (2pair)
This industry leading coupler features plastic standard coupler with metal knuckle, and #621 torsion centering spring and comes complete with #233 insulated draft gearbox and lid. The #32 Magne-Matic Metal Coupler is designed mostly for body mounting with limited space either above or below the mounting platform, with or without Draft Gear Box Lid and with Draft Gearbox Lid either on top or bottom.
Note: The 30-Series Torsion Spring can be mounted either below or above the coupler shank, but must always be mounted between the Coupler Spring Lid and Draft Gearbox.
The 142 Whisker Metal Coupler mounted in a #252 Snap-together Gearbox is equivalent to the #32 Coupler. The Whisker Coupler mounted in a #252 Snap-together Gear box makes for simple and easy assembly.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.
PACKAGE INCLUDES:
(2) Pair #32 Plastic Shank Couplers - Medium Overset Shank
(2) Pair #621 Torsion Centering Spring
(2) Pair #233 Gearboxes & Lids
(2) Pair #210 Washers
(2) Pair #256 - 2-56 Screws
(2) #622 Knuckle Springs
#32 Plastic Coupler Features:
-Material - Metal Knuckle, Plastic Coupler Shank
-Shank Length - Medium (9/32in) (center hole to back of coupler head)
-Coupler Offset - Overset
-Knuckle Spring - #622
-Centering System - Standard Shank
-Centering Spring - #621 Torsion Centering Spring
-Head - Standard Head
-Works With - #233 draft gearboxes
GLa 2-Bay Hopper: Cambria & Indiana #1692
Detail Variations:
Single Car
As operated from the 1930s to the 1950s
Features:
All-new tooling
Scaled from original blueprints
Die cast frame and floor for optimum weight
Full interior rivet and bracing details
Factory installed wire grab irons
K- or AB-brake gear installed as appropriate
Factory installed Kadee #158 couplers in narrow draft gear box
Turned metal wheels in correct PRR 12D-F8 trucks
Accurate paint and lettering
Multiple road numbers available for each paint scheme and railroad
Detail Variations:
As operated from the 1930s to the 1950s
6-pack includes the following numbers, all individually packaged:
#1501
#1523
#1579
#1692
#2005
#2021
Walthers Cornerstone Bridge Piers 2 pack
Building realistic N Scale bridges is easy with the Cornerstone Bridge Pier kit, with parts to build your choice of two Single- or Double-Track Piers featuring:
Common prototype design used with various types of bridges
Fits steam-, diesel- and modern-eras
Simulates poured concrete construction
Build with or without cutwater ends for extra realism
Molded cut lines for easy height adjustment to 2-11/16, 2-3/16 or 1-3/4in 6.8, 5.5 or 4.4cm
Molded in gray plastic
Use with Cornerstone Single-Track Arched Pratt Truss Bridge (933-3870), Double-Track Truss Bridge (933-3242), Through Plate-Girder Bridge (933-3820), and Abutments (933-3881) each sold separately - adaptable to most model bridges
Tru Color Paint - Acrylic - Genesse & Wyoming Yellow - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
HO Scale Santa Fe Refrigerator Car -El Capitan #34811
RR27 CLM
HO SP C-40-3 Steel Cupola Caboose - Texas and New Orleans (T&NO Delivery Scheme) #416
1940+
The Rapido Trains HO scale SP C-40-3 Caboose features:
Multiple window styles based on the era
Multiple roofwalk configurations based on the era
Working roof marker lights where appropriate
Full, painted interior
Operating interior lights
Multiple optional parts based on era
Full underframe details
Factory-installed semi-scale couplers
HO 1937 AAR 40Ft Boxcar - Round Corner Ends - Lackawanna (DL&W Phoebe Show) #51212
The Rapido Trains HO scale1937 AAR Boxcar features:
Accurately scaled from prototype blueprints and photos
Multiple end, roof and door variations
Correct brake wheels and housings
Correct running boards
Full underbody detail
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
Multiple road numbers available for each paint scheme
Tangent Scale Models HO PS4750 Covered Hopper RREX- Klemme Coop Iowa 4-1979
Product: Pullman-Standard PS-2CD 4750 Covered Hopper
Scale: HO Scale 1:87.1
Truck: Tangent 100-ton Barber S-2 trucks with prototype-specific rotating bearing caps and separate brake beam part
Wheels: CNC-Machined 36in Wheels
RREX -Klemme Coop Iowa 4-1979- is our private grain elevator selection in this release of PS4750s. This car is a stunner and our next pink Iowa coop offering, with large Klemme Coop lettering and the smaller Klemme, Iowa underneath. This is a very sharp looking car and goes well with our previous pink car offerings! Details include accurate body-mounted brake hardware with center-tube linkage and Miner Selflok outlet gates.
HO ET44 Tier 4 - DCC Equipped - CN Heritage/Elgin, Joliet and Eastern #3023
The Officially Licensed GE ET44 -Tier 4 GEVO- from InterMountain continues our tradition of excellence in this series of modern, GE-built locomotives. This all-new model features finely molded parts, railroad specific details, prototype based color representation with laser sharp painting and printing inlcuding the numerous miniature labels accurately represented. Our all-new Tier 4 drive is smooth, heavy (approx. 1.6 lbs), and powerful with an all new larger motor.
OPERATING LED LIGHTING INCLUDES:
-Front headlight, -Correct scale sized front ditch lights, -Number Boards, -Rear headlight, -Front & Rear Walkway Lights, -Correct scale sized rear ditch lights (road name specific), -Correct scale sized front & rear RED DPU lights on Canadian National units.
OTHER DETAILS INCLUDE:
-Spinning bearing caps on both ends of all 6 axles on the trucks, -Accurate GE style traction motor detail on 3rd and 4th axles, -Wheel flange lubricator detail, -Accurate dark cab side window tint, -See through etched metal grilles on the radiator cab roof, dynamic brake area, and body (body grilles have accurate corrugations), -Real brake chain, - Real tow chain (road name specific), -Separate underframe piping detail, -LSL lights (CSX & NS), -Etched metal walkway steps (road name specific), -Accurate PTC Antenna Arrays on cab roof (road name and number specific), -Accurate Nathan Airchime K5HL Horn, -Road name specific front/rear handrails, -Formed wire nose to walkway handrail, -Rear rock pilot on CN units, -See-through etched metal walkway panels on CN units. All of this along with numerous etched metal and wire details.
-Sound locomotives released in 2021 are factory equipped with ESU LokSound 5 DCC sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Sound locomotives released prior to 2021 are factory equipped with ESU LokSound Select sound decoders featuring accurately recorded Tier 4 GEVO sounds played through dual -sugar-cube- type speakers.
-Non-sound locomotives released in 2021 are factory equipped with ESU LokPilot 5 DCC decoders.
-Non-sound locomotives released prior to 2021 are factory equipped with ESU LokPilot V4.0 non-sound decoders.
-DC only customers may reserve models with a dealer as -DC only-. Note that some lighting functions may not operate correctly or at all when a locomotive is converted to DC only. DC only locomotives are non-sound only.
The first release of this model showcased the -as-delivered- version with the -square exhaust- for all roads except Norfolk Southern which never received any units with the square exhaust.
The second release features the GE modified -angled exhaust- version for all roads except Navajo Mine Railroad which received the -square exhaust- for their two units.
HO EMD GP40 - DCC & Sound - Union Pacific #594
1997+
The Rapido Trains HO scale GP40 locomotive features:
Road-specific details for each model
Rapidos innovative dead straight metal side handrails with plastic stanchions
Incredible underframe detail including traction motor cables, air filters and a silly number of separately-applied parts
Road-specific battery box doors
Separate grab irons and handrails installed at the factory
Operating headlights, rear lights, white class lights AND ditch lights and beacons (where appropriate)
Highly detailed cab interior
Correct fuel tank sizes per road number
Multiple styles of stepwells
See-through, etched steps
Separately applied wire grab
Appropriate cab or nose headlights
Multiple truck sideframes tooled
Multiple dynamic-brake hatches
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound - ESU LokSound V5 Decoder
Mo-Power capacitor
-Ever experience a loss of power? Experience it no more with the all-new -Mo-Power- capacitor.
Designed by Rapido with the guidance of ESU LokSound, this handy electrical component, which is integrated with the main PCB board, ensures you run uninterrupted from a momentary loss of track power. It will provide anywhere from two to five seconds of juice, depending on the Rapido locomotive.
Ultra Thin Kerf Razor Saw - 42 TPI
The thinnest razor saws available with ultra thin .008inch thick metal blades. #150 is ideal for super fine cuts in wood & plastic w/o splitting or ragged edges. #200 offers longer wear in metal cutting applications. Both have shorter cutting depths plus steel backs for greater blade stability.
The thinnest razor saws available with ultra thin .008inch thick metal blades. #150 is ideal for super fine cuts in wood & plastic w/o splitting or ragged edges. #200 offers longer wear in metal cutting applications. Both have shorter cutting depths plus steel backs for greater blade stability.
Spray Can - Light Green (100mL)
This product is considered HAZARDOUS. Shipping restrictions may apply. This item may not be shipped by air.
Tamiya TS clear-coat spray is a synthetic lacquer that cures in a short period of time. The spray paint is extremely useful for painting large model surfaces. Tamiya spray paints are not affected by acrylic or enamel paints, therefore, following the painting of the entire assembly, details can be added or highlighted using enamel and/or acrylic paints.
Allow paint to fully cure before using clear coat. This will prevent the clear coat from cracking due to different cure rates from the paint underneath. For best results allow up to one week. Make sure to test clear coating over decals before applying to a finished project. Applying clear coat can harm some decals.
NOTE: TAMIYA TS paint is not designed to be used with clear Polycarbonate/LEXAN R/C body shells. The paint will flake off. For Polycarbonate applications please use Tamiya PS spray paint.
HO 50ft FMC Combo Door Boxcar - Railbox/ABOX (Late) #50035
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Weighted for optimum performance
- Minimum radius: 18 inches
- Body-mounted, McHenry operating scale knuckle couplers
- Fully assembled and ready for your layout
- Machined metal wheels with RP25 contours operate on all popular brands of track
- Accurately painted and printed for prototypical realism
- Highly detailed, injection-molded body
PRIMED FOR GRIME MODELS FEATURE:
- Duplicated look and feel of In Service equipment
- Faded base colors matched to the prototype
- Perfect starting point for adding grime and rust
RTR 60Ft Gundreson Box Car - MTNR #175138
MODEL FEATURES:
Fully assembled and ready for your layout
Separately applied wire grab irons and etched end platforms
Weighted for optimum performance
Razor sharp painting and printing
36Inch metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Minimum radius: 18Inch
PROTOTYPE HISTORY:
The modern 100 ton, high-cube, 60Ft boxcar has become ubiquitous in the modern rail scene. These cars are designed to carry a myriad of loads, from auto parts to forest products.These boxcars are a fixture to any modern freight train.
The RTR model depicts accurately a Gunderson built boxcar. Many paint schemes from the extremely similar Trenton/Greenbrier built cars are also offered as close -stand-in- type models.
Specifications
PROTOTYPE MANUFACTURER: Gunderson
COUPLER STYLE: McHenry Scale Knuckle
ERA: 1990+
Norfolk Southern NS 169775 - Protect II
Built: RBLT 7-99
The Evans 100 Ton Coil Car carries coiled steel. This car is brown with brown hoods. The BNSF lettering is white on the car and white on the hoods. The model is equipped with metal wheelsets and Kadee® couplers.
HO EMD GP35 - Paragon4 Sound/DC/DCC - CP Rail #5012
(Multimark w/5 Inch Stripes)
Ubiquitous on American railroads, the EMD GP35 is a 4-axle diesel-electric locomotive built by EMD and subsequently General Motors Diesel in the mid 1960s. Over 1300 of these locomotives were produced, and they were operated by virtually every major railroad in the United States. Additionally 26 units were built for Canadian railroads and another 57 units were built for Mexican railroads. These freight locomotives were powered by EMD 567D3A 16-cylinder engines that generated 2500 horsepower.
List of individually controllable lights in our EMD GP35 models:
- Headlight
- Rear Light
- Mars Light (SP only)
- Numberboard Lights (Front & Rear)
- Front Classification Lights
- Rear Classification Lights
- Emergency Light (SP only)
- Rotary Beacon (where appropriate)
- Ditch Lights (where appropriate)
- Cab Light
Road-specific detail options that are prototypically accurate for each road name:
- Truck sideframes
- Dynamic brake hatch
- Open & closed type fans
- Short hood detail arrangement
- Long hood end detail arrangement
- High short hood option where accurate
- Horn type and location
- Bell location
- Multiple front pilot types
- Multiple rear pilot types
- Accurate cut lever types
- MU receptacle arrangement
- Multiple sunshade options
- Antenna type and location
- Wind deflector type
- Rooftop AC for ATSF type
- Rotary beacon type and location
Industry-leading Model Features:
- Paragon4 Sound & Control System featuring ROLLING THUNDER
- Integral Dual-Mode Decoder with Back EMF for Superb Slow Speed Operation in DC and DCC
- Precision Drive Mechanism Engineered for Heavy Towing and Smooth Slow Speed Operation
- All Wheel Electrical Pick-up
- ABS Body with Die Cast Chassis for Maximum Tractive Effort
- Premium Caliber Painting
- Prototypically Accurate Paint Schemes and Road Numbers
- Many Separately Applied Details such as Handrails, Grab Irons, Horn, Bell, Wipers, and Etched Metal Grills
- Prototypical Light Operation - accurate for each paint scheme
- Prototypically Accurate Sounds for the EMD GP35 Diesel Locomotive
- Metal Kadee-compatible Couplers (2)
- Will Operate on Code 70, Code 83, and Code 100 Rail
- Minimum Operating Radius: 18 inches
Paragon4 Sound & Control System Features:
- Operates in DC & DCC with improved DC speed control (use DCMaster for DC Sound)
- Built-In extra capacitance to navigate imperfect track
- Pro Lighting Mode offers individual control of all lights on model
- Switcher Mode for precise low speed control
- Record & Play Operation - Records and plays back sounds and movements once or repeatedly for automatic operation
- High Resolution Audio
- Quillable Horn for various whistle lengths and patterns
- Choice of 3 selectable Horns
- Alternate Whistle / Horn where applicable for locomotive with air horn and steam whistle - both the main whistle and alternate can be easily played
- Adjustable bell ringing interval for faster or slower bell
- Numerous user-mappable functions with available keys
- Multiple realistic passenger and crew sounds play on command
- Grade Crossing Automatic Signal
- Automatic Forward / Reverse Signal
- Prime Mover sound intensity varies with load
- Individually adjustable sound volumes for each effect
- EZ Reset Button for quick return to factory default settings
Tru Color Paint - Acrylic - SP Scarlet Red - 1oz
Tru-Color Railroad Color Acrylic Paint is a line of airbrush-ready paint accurately matched to colors used by railroads across the continent. The acrylic solvent based paint that is designed to be airbrushed directly from the bottle without thinning. The paint is designed for use on plastic models with no priming necessary, although you can use a primer if desired. Brass models must be sandblasted or treated before applying Tru-Color or the paint will not adhere properly. No additional gloss coat is necessary before applying decals to gloss or semi-gloss colors. Use acetone for airbrush cleanup, but do NOT thin Tru-Color Paint with acetone. Recommended airbrush pressure is 28 to 35psi. Not mixable with any other brands of paint, but can be sprayed over most fully cured colors from other manufacturers (experiment on a small section before proceeding).
1947-55 32Ft Fruehauf Aerovan w/ Mayflower Decals - Unpainted and Resin Cast Kit
N Scale Laser-Cut 2-Lane Curved Wood Grade Crossing - 9-11in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
N Scale Bettendorf Trucks w/ long ext. couplers (1pair)
HO Chemical Tankcar - Staley #4925
Detailed Information
MODEL FEATURES:
Separately applied brake wheel
Fully-assembled and ready to run
Highly-detailed, injection-molded body
Wireform safety handrails
Painted and printed for realistic decoration
Machined metal wheels
Weighted for trouble-free operation
Wheels with RP25 contours operate on all popular brands of track
Body-mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing
Interior plastic blister carton safely holds model for convenient storage
Minimum radius: 15inch
HO U33B - DCC/Sound - Guilford (Boston & Maine) #192
FEATURES:
- Flush-mounted radiator screens and air intake screens on the long hood - early phase
- Built-out area on the top of the front and rear pilots - early phase
- Corrugated radiator and air intake screens, with a flat pilot face - late phase
- Optional separate electrical equipment box will be included on the left side walkway behind the cab per the prototype
- AAR-B or Blomberg trucks will be used when appropriate
- Separately-applied detail parts including: windshield wipers, metal grab irons, coupler cut levers, fine scale handrails & more!
- Five pole skewed armature motor with dual flywheels for optimum performance at all speeds
- Directional lighting with Golden-white LEDs
- Blackened metal wheels
ATLAS MASTER GOLD (DCC/SOUND):
- ESU LokSound decoder, supporting all DCC programming modes
- Flexible mapping of function keys F0 to F31
- Follows all NMRA DCC standards and recommended practices
- Lighting effects to match the prototype, including Gyralight and Mars light where appropriate
- Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
SD70ACu - DCC Ready - Norfolk Southern #7312
NS FEATURES:
-Rebuilt from UP SD90MAC cores at the Juniata Locomotive facility
-Rebuilt units have added rear ditch lights per NS prototype
-Rebuilt units have 5-chime horn per prototype
-High headlight location per NS practice
-All selected road numbers have deck mounted ditchlight placement
-NS style PTC antenna array
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately-painted and –printed paint schemes; using railroad supplied paint chips for accuracy
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See-through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE:
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
9ml pan (D) - Raw Umber Tint
Each PanPastel Color is loaded with the highest quality artists pigments; and is made using a unique manufacturing process requiring minimal binder, resulting in rich, ultra soft and low dust colors. PanPastel Colors can be mixed for an infinite palette of colors.
Each pan contains 9ml (0.30 fl oz) of color. 40percent more than the average pastel stick, and yielding approx. 4-5 times more coverage.
HO Trinity 3230 Covered Hopper - Greenbrier Management Services (BNBX) #95495
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
The Trinity 3230 Pressure Differential covered hopper is essentially a smaller version of TrinityRails 5660 PD. The smaller version was developed from the base design introduced by Thrall Car in the late 1990s.
The smaller size enables the cars to be loaded with heavier ladings such as cement and various grades of fly ash. Most of the cars are operated by Railcar (Leasing) companies or Shippers.
Weathering Sponge Brush - Medium
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.156 (7pcs pkg)
HO Scale 17,600 Gallon Tank Car - ADM (Leaf & Conspicuity Stripes) #17283
Features:
- Three separate styles of manway / platform / ladder arrangements (used as appropriate per road name)
- Fine scale railings
- Separately applied brake rigging
- Separately applied manway ?clamshell?-style cover (used when appropriate per road name)
- 100-Ton Roller Bearing Trucks
- Accurate painting and printing
- Full stand-alone brake system details
- Bottom outlet valve detail
- Stand-alone heater coil pipes
- Highly detailed body with prototypical jacket seams
- See-through top platform grating
- AccuMate couplers
Built-&-Ready Landmark Structures - Country Store Expansion
Assembled - 6-7/16 x 5-1/2 inches
(16.4 x 14cm)
The general store is expanding and construction is well underway on the new addition.
HO PA-2 + PB-2 Demonstrator Set - DCC Ready - Alco-General Electric #8375
The 2nd Run ALCO PA and PB Features:
Photo courtesy of NHRTHA
Correct nose and roof profiles 3D-scanned from the prototype
Loads of roadname-specific details
ATSF re-powered units feature unique roof blister and EMD style
fans
A units and A-B sets available
Dynamic or non-dynamic brake versions, where appropriate
Full underbody piping and conduit
Separate grab irons and handrails installed at the factory
Etched-metal grilles, where appropriate
Lit number boards
Full cab interior
Operating Gyralite or red Mars light, where appropriate
Rapidos proven drive system
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options
ESU LokSound V5 Decoder
HO 40Ft Boxcar w/ Late Improved Dreadnaught Ends - Great Northern (Big Sky Blue) #5177
Rapido Trains Inc.s new model of the GN 12-panel boxcars feature:
Accurate sides
Early or Late Improved Dreadnaught Ends as appropriate
Diagonal panel roofs
Accurate welded underframes will full underbody piping and detailing
Correct 6ft Youngstown doors
Free rolling ASF Ride-Control trucks with turned metal wheelsets
Rapido semi-scale couplers
Accurate paint and lettering
Multiple road numbers per scheme
HO 45ft CIMC Container - Hanjin
(blue, white)
FEATURES:
- Based on common size & style used worldwide
- Fully-assembled & ready to use
- Colorful paint & lettering schemes
- Separate door latch details
- Realistic loads for WalthersMainline(R) & WalthersProto(R) well cars, sold separately
- Great detail for terminals, highways & industrial scenes
Dimensions: 70 X 60 Scale Feet / 9-5/8 X 8-1/4 Inches. Color as shown
This kit is designed with cut lines on the back side of the walls so that door and window locations are optional. Kit includes doors, windows, roof vents and down spouts.
HO EMD SW9 - DC/ Silent - Boston & Maine (B&M As Delivered) #1231
Boston & Maine:
Delivered in 1952
-Trash can- style spark arrestors
Deck mounted side handrails
Hood mounted number boards (road number specific)
Working double Pyle headlights
The Rapido Trains HO scale SW9 locomotive features:
Highly detailed cab interior
See-through metal etched parts
Many road specific details
Heavy diecast frame
Diecast gear boxes for added weight
Rapido Semi Scale metal couplers
Full LED lighting, including: operating beacons/flashing lights where appropriate
DC/Silent (21-pin DCC Ready) or DC/DCC/ESU LokSound
Featuring the Rapido MoPower capacitor
ProtoThrottle - Blue Face Plate
The ProtoThrottle Realistic Control Stand Throttle mimics a standard EMD control stand including full detent throttle and reverser handles, a spring-loaded horn handle, a push-on/push-off bell button, and fully programmable front and rear headlights with a setting for ditch lights. In addition, the ProtoThrottle comes with a robust faceplate machined from aluminum, including prototype bezels, and anodized to give the look and feel of a real control stand.
FEATURES:
- Fully wireless throttle
- Eight detent throttle handle
- Reverser handle with centered position
- Brake handle and spring-loaded horn handle
- Push-on/push-off bell button
- Front and rear headlight knobs with dim and ditch light settings
- Auxiliary buttons that can be assigned to any DCC function
- Works with any standard DCC decoder
- Interfaces to any DCC system (with separate receiver specific to your DCC system)
- Highly configurable to suit your operating style
- Designed and built in the USA!
- Securely store your throttle with the ProtoThrottle Pocket (sold separately)
- EMD-style knob and handle upgrades available from Scottys Model Shop
Specifications:
- Approximate Dimensions: 7.6(L) x 3.2(W) x 3.0(H) inches
- Approximate Weight: 15oz
- Powered by 2x AA batteries (not included)
Wall-Mount Gooseneck Light - Just Plug - pkg(2)
HO 60ft Bulkhead Flatcar - PGE #16099
MODEL FEATURES:
- Separately applied end details and brake wheel
- 33 inch machined metal wheels with RP25 contours
- Body-mounted McHenry operating scale knuckle couplers
- Painted and printed for realistic decoration
- Fully-assembled and ready to run
- Highly-detailed, injection-molded body
- Painted and printed for realistic decoration
- Minimum radius: 18 inches
PROTOTYPE AND BACKGROUND INFO:
Specialized load handling equipment has long been used to secure loads in railroad freight service. One of the most common forms used on flatcars is the addition of bulkheads to the ends of the car. Bulkhead ends not only make it easy to load pulpwood, but also keep regular items like lumber, building materials and pipe loads from shifting in transit.
Alco RS-11, 2nd Run - Diesel Locomotive - DCC Ready - Delaware & Hudson - Lightning Stripe #5000
Our Second Run RS-11 Models feature:
Correct hood and roof profiles 3D scanned from the prototype
Operating number boards, headlights, class lights and cab control stand lighting
Working inspection lights in the inspection light castings
Straight metal side handrails with plastic stanchions
Huge amount of newly-tooled roadname-specific details
Full underbody piping, conduits and steam lines, where appropriate
Correct roadname-specific corner steps
Separate grab irons and handrails installed at the factory
Heavy, die-cast chassis and full, multi-color interior
New, rock-solid 5-pole skew-wound motor with dual flywheels and Rapidos renowned silky-smooth drive
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound (ESU LokSound) available
Accurate sounds recorded from a real Alco 251B prime mover
HO 1974 Checker Sedan Taxi - Checker Cab Detroit, Michigan
1940-49 REO Speedwagon Refrigerated Truck - Unpainted and Resin Cast Kit
N Scale RTL Turboliner - DCC & Sound - Amtrak (Phase III Late) Set #4
Road Numbers:
156, 179, 180, 181, 157
The Rapido N Scale Rohr Turboliner features:
Accurately designed using original blueprints and field measurements
Tinted windows, interior details and flicker-free interior lighting
Separate factory installed grab irons
Highly-detailed trucks including third-rail shoes
Working headlights, marker lights and cab-mounted strobe lights
Both Power Cars come with smooth, reliable drive systems for optimal performance
DCC models feature ESU sound decoders in each power car with accurate sounds sourced and remastered from original videos
All wheel electrical pickup. Yes, we mean every ... single ... wheel!
Rapido Trains Inc. is pleased to bring speed to the rails with the Amtrak Rohr Turboliner in N Scale!
In the early days of Amtrak, efforts were made to improve passenger services along key corridors. Following the success of the French-built RTG Turboliners in the mid-1970s in the Midwest, Amtrak turned to Rohr Industries in California to build modernized Turboliners for use along the Empire Corridor.
Entering service starting in September 1976, these new RTL Turboliners quickly proved their value, bringing passengers back to the rails. Equipped with third-rail shoes, they operated on electric power through New Yorks Grand Central Terminal (and later Penn Station), switching to gas-turbine power once out of New York City. Painted in Amtraks stunning red, white and blue Phase III paint scheme, they operated on most Empire Corridor services, as well as regular appearances on the Adirondack to and from Montreal in the early years. Occasional equipment needs even put the Turbos on other rare adventures outside their normal call of duty, including the Niagara Rainbow to Detroit via Southwestern Ontario, and the Maple Leaf to Toronto via Niagara Falls.
After nearly 20 years of service under their belts, Amtrak selected one RTL set in 1994 to be rebuilt into what would be called the RTL-II, incorporating several improvements including new turbines, a remodelled interior, a striking new demonstrator paint scheme, in addition to extending the lifespan of the set for several more years. While this set continued in service until 2003, no other RTL-II sets were ever commissioned.
Further redevelopments and improvements of the fleet into the RTL-IIIs was never fully realized, and all were retired from active service in 2004. Conventional equipment has since been utilized on the Empire Corridor services in place of the once mighty Turboliners.
HO 53ft Jindo Container - EMP ex-FEC Set #2 (3pk)
(#968402, 968423, 968437) (BLUE/YELLOW)
FEATURES:
- Side corrugations with an 8-55-8 arrangement
- Front wall with 10 vertical corrugations
- Roof with 6-54-6 corrugations
- 1-3-1 beveled doors
- Placard Holders on front wall, sides and door
- Crisp, accurate lettering and painting
HO GE Dash 9-40CW - DCC & Sound - Norfolk Southern NS #9773
NS FEATURES:
Front and rear ditch lights (Alternately flash in DCC mode)
High-mounted head light and number boards
K5 horn
Electronic brakes
Graham White Electronic bell
Delivered new in 2003 from GE, NS took delivery of class 9745-9811 Dash 9-40CW locomotives. Some unique features include: electronic bell, high mounted headlight, and electronic parking brake. We are offering both versions of the front cab schemes to choose from!
ROAD NUMBER SPECIFIC FEATURES:
#9754 -White face- scheme
#9773 -Unibrow- scheme
#9806 -Unibrow- scheme
Dash 9-44CW SERIES LOCOMOTIVE FEATURES:
Illuminated ground lights above front trucks, front and rear walkway lights, and number boards
Etched, see-through walkway steps
DCC equipped models feature dual cube speakers for optimal sound quality
GENESIS DIESEL LOCOMOTIVE FEATURES:
Coupler cut levers
MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Windshield wipers
Lift rings
Wire grab irons
Sander lines
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Body-mounted McHenry operating scale knuckle couplers
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for trouble free operation
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Packaging securely holds the model for safe storage
Minimum radius: 18inch - Recommended radius: 22inch
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO Scale - 46/47 Mercury Half Ton Flatbed- Unpainted and Resin Cast Kit
Lift Rings - Alco FA/PA Century Type - pkg(12)
HO UAC TurboTrain Completion Pack: VIA Set #2
#263-257-254 + IC-34 #264
The HO scale Turbo 2.0 features:
Designed from original United Aircraft blueprints
New, smooth-running drive system with excellent slow-speed performance
Completely redesigned Single Axle Trucks with free rolling, needlepoint axles
Every wheel on the train picks up power for rock-solid reliability
Unique Canadian and American versions
Accurate colors on Amtrak models approved by Amtrak
Three different Power Dome Cars and six different Intermediate Cars for total accuracy
Bright, golden-white LED headlights and redesigned, roof-mounted SMD interior lighting system
ESU LokSound V5 decoders and high-quality speakers in each Power Dome Car
The only accurate TurboTrain sounds recorded from the last surviving prototypes in 1982
Will easily negotiate curves down to 18inch radius
Works on DC or DCC
Available in 3-car and 5-car sets, with 4-car Canadian add-on sets to make the complete 9-car train
Turbo 2.0 is not compatible with the 2008 model.
Parking Meter pkg(14) - Yellow
N Scale Code 80, Large Radius, Curved Turnout - Right Hand
This ever-popular trackage system for N offers a choice of either wooden or concrete type sleeper flexible track and a wide range of turnouts and crossings in both Insulfrog and Electrofrog types.
Suitable for all makes of N Gauge trains and compatible with PECO Setrack.
Technical Specification:
Length: 160mm
Frog Angle: 8 Degrees
Radius: 457 x 914mm
Recommended to be used with:
SL-310 Conducting Rail Joiners: Nickel Silver for PECO Code 80/55 track
SL-311 Insulated Rail Joiners for PECO Code 80/55 track
SL-14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork
Atlas - N Scale GP-9 TT - Gold DCC Sound - Wabash #493
Features:
Powered low friction drive
Blackened metal wheels
Dual brass flywheels
Directional lighting
Golden-white LEDs
AccuMate couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
AccuMate couplers are made under license from AccuRail, Inc
Atlas - N Scale GP-9 TT - Gold DCC Sound - Wabash #495
Features:
Powered low friction drive
Blackened metal wheels
Dual brass flywheels
Directional lighting
Golden-white LEDs
AccuMate couplers
DCC Operation Features (GOLD LOCOMOTIVES ONLY)
Supports all DCC-programming modes
DCC includes RailCom and RailComPlus, with 14, 28 or 128 speed steps and with 2-digit and 4-digit addressing.
Flexible mapping of function keys F0 to F28.
A total of 6 DCC function outputs are available, and all can be function mapped (disable, brightness, light effects) individually
AccuMate couplers are made under license from AccuRail, Inc
Atlas HO Scale EMD GP38, Gold Series- With ESU LokSound DCC, Norfolk Southern #5634
Atlas Item #: 10003242
MODEL FEATURES:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately-installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
Additional features included but not installed (GP-40s only)
Electrical cabinet air filter box (ECAFB)
Two engine compartment roof vents which were added by many railroads sometime after delivery
SOUND & DCC FEATURES FOR GOLD SERIES:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices.
Over 20 sound effects are available, including engine start-up and shutdown, prime mover sounds through all eight notches, bell, air horn, air compressor, dynamic brakes and more.
There are 16 user-selectable horns, 2 user-selectable bells, and 2 user-selectable synchronized brake squeals.
Manual and Automatic Notching modes with the ability to change modes on the fly are provided for true realism.
Prototype Overview:
In 1966 EMD introduced a new line of locomotives based on the 16-cylinder 645-series prime mover. The
40-series included a six-axle and four-axle model, the latter being the GP40. A total of 1,145 units were
produced between 1966 and 1972. These turbocharged 3,000hp locomotives were used primarily in road
freight service. The GP40 was a versatile locomotive that could be found across the US hauling drag freights
over mountain passes and leading high-speed intermodal trains across flat terrain. Three rooftop radiator fans
at the rear of the long hood differentiate a GP40 from its lower horsepower counterpart, the GP38, which has
two fans at this location.
Concurrent with GP40 production, EMD offered a lower horsepower, non-turbocharged locomotive based on the
same 645-series prime mover. The four-axle GP38 was rated at 2,000 hp and had the advantage of costing less
than the GP40. A total of 727 units were produced between 1966 and 1971 when the model was superseded.
The wheelbase of the GP38 was identical to that of the GP40. Both units shared the same EMD road-switcher
style body that was introduced with the GP35 in 1963. A desire for standardization caused the GP38 to share
the same wheelbase, frame and many external components as the GP40. The GP38 was purchased by large and
small roads alike. It was routinely found in local and road freight service throughout the US. Many GP38s and
40s are still in service today, either having been rebuilt or modified. A locomotive that has withstood the test of
time.
Many options exist on the Atlas GP38 and GP40 models. Some of these are: Long hood with or without dynamic
brakes, multiple fuel tanks, high or shoot hoods, and more.
HO Track Maintenance Crew (6)
HO 60ft Gunderson Boxcar - RailNet/RNEX #752033
MODEL FEATURES:
- Separately applied wire grab irons and etched end platforms
- Body-mounted McHenry operating scale knuckle couplers
- Fully assembled and ready-to-run
- Razor sharp painting and printing
- Weighted for optimum performance
- 36 inch metal wheels with RP25 contours
- Minimum radius: 18 inches
HO GP9RM - DCC & Sound - Canadian National (Large Noodle) #7008
The GP9RM Locomotive features:
Heavy diecast frame with super detailed piping and traction cables
Detailed Blomberg trucks, with and without outside brake shoes
Traction motor details on gearbox
Working track lights, class lights, control stand lights and flashing belt pack light on select mother-slug sets (Late sets)
Multiple battery box styles
Spark arrestors or open exhaust stacks as appropriate
Metal side handrails
Working ditch lights on 4000, 4100 and 7000 series locos
Front and rear plows or curved plate pilots on appropriate road numbers
Footboard pilots on mother units
Detailed walkway tread
Available as DC/Silent (21-pin DCC Ready) or
DCC/ESU LokSound
In the early 1980s, CN embarked on a rebuild program in their Pointe Ste. Charles shops to extend the operating lives of the GP9s. The -GP9RM- was the result, which was divided into three groups: The 4000/4100 series were rebuilt as road units, the 7000 series as switchers and the 7200/200 series as -mother- and -slug- pairs. The slugs lacked a prime mover, instead drawing power from the mother to operate the traction motors. The long hoods were cut down and ballast added to help weigh them down.
The GP9RM fleet included a chopped short hood, addition of three coloured marker lights on both ends, the bell moved to the side of the hood and the dynamic brake blister converted to intake filters. Internally, the units had upgraded 16-645C prime movers and improved electrical systems. The 4000/4100 series road units were changed to have the short hood end designated as the front, with the control stand reoriented, while the 7000/7200 switchers retained the long hood designated as the front. As with any rebuild project, there were differences from one loco to the next as well as minor changes over the ten year rebuild program. One could see these locos all across the CN North American system.
The Rapido GP9RM represents the locomotives rebuilt from the original phase II GP9 locomotives, with details corresponding to the earliest rebuilds, right on up to the last, in 1988. The biggest variation of the slug rebuilds was the use of Blomberg and Flexicoil trucks. Both variations are represented! Starting in 1994, CN applied Belt-Pack remote control systems to the 7200/200 series locomotives. Some of these new features included extra antennas and strobe lights ? all details that will be featured on the 7200 series from Rapido!
Ultra Fine Red Sable Brush - Size 5/0
HO Trinity 3230 Covered Hopper - Lafarge North America (LAFX) #60143
FEATURES:
- Ready to run
- Injection molded plastic
- Fine scale detail
- Separately applied wire grab irons
- Separately applied wire cut levers
- Etched metal roofwalks
- Crisp painting and printing
N Scale Track-Bed - 24ft Continuous Roll
Track-Bed Roll offers a smooth application. It deadens sound, requires no pre-soaking like cork, remains flexible and will not dry out or become brittle. Aligns well with cork or Homasote applications. Also works great for H0n3 and Hon30 gauge.
Install easily with Foam Tack Glue (#1444). Pin in place with Foam Nails (#1432).
1 roll/pkg- 1/8 inch depth x 1-1/4 inches wide x 24 feet long
Ballast - Medium Light Gray - Shaker (57.7 in3)
Use ballast and coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads, and coal piles. Available in several colors and sizes, you can mix and match for a superior realistic effect. Ballast and coal are lightweight and easy to use. Watch the Woodland Scenics video about how to apply it and attach with scenic cement!
ALLERGY CAUTION: Ballast contains tree nut by-products.
HO MLW M630 - DCC & Sound - CP Rail (Multimark) #4579
5inch stripe, Large Multi-mark w/out water expansion tank, no ditch lights
Exec = Executive Line: Ready to Run, super detailed, numbered, with DCC and Sound or Analog (DC).
DCC and Sound version features LokSound V5 decoder.
Bowser does not recommend LOK sound locos for use on DC layouts.
HO ACF 50Ft 6In Boxcar - Railbox (Large Logo) #32745
FEATURES:
Prototypical non-terminating corrugated ends
Diagonal paneled roof
Single 10-foot YSD design sliding door (non-operating)
Detailed cross-member attachment rivets on the side sills
Weighted, detailed underframes
True scale dimensions with acccurate details
Equipped with AccuMate knuckle couplers
HO MP15AC - DCC & Sound - CSX #1161
Detailed Information
CSX FEATURES:
Early YN3 repaints
Operating front and rear ditch lights
Timken bearing caps
Horn style per road number
CSX operates a large group of MP15ACs of L&N and SCL heritage. Many have been repainted into the -YN3- scheme of dark blue and yellow.
ROAD NUMBER SPECIFIC FEATURES:
#1161
RV style air conditioner
#1179
Strobe lights
spare coupler knuckles on rear pilot
#1180
CSX angled-style ditch lights on rear
spare coupler knuckles on rear pilot
LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Windshield wipers
Lift rings
Blomberg-B trucks
Sander lines
Directional constant lighting
Walkway Tread
Fine-scale Celcon handrails for scale appearance
Headlight brightness remains constant
Separately applied photo-etched metal and injection molded detail parts
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Accurately-painted and –printed paint schemes
McHenry scale knuckle couplers - Kadee compatible
Fully-assembled and ready-to-run
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds model for safe storage
Replacement parts available
Minimum radius: 18inch
NEW FEATURES:
Operating ditch lights (if equipped)
Operating ground lights
Newly designed motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
SOUND EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Excellent low-speed operation
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
HO 70-Ton Covered Hopper - Soo Line - #8951
FEATURES:
- Crisp details
- Sharp painting and printing
- Metal wheels
- Knuckle couplers
HO 40ft Fruehauf Trailer - Mo-Pac #202241
Era: 1971-1990, 1991-2009, 2010-Present Day
MODEL FEATURES:
- Separately applied mud flaps
- Rubber tires
- 2 or 4 door rods per prototype
- Wheeled or shoe-style landing gear per prototype
- Fully-assembled and ready to use out of the box
- Highly-detailed, injection-molded body
HO Scale 40Ft Down-Line Regulator Assembly Kit
The natural poles in this kit come already painted depicting weather-stained, pressure treated wood. The other parts are cast in metal -just like the prototype- and ready to be painted. The kit comes with everything that you see in the picture, including the wires needed to make this look like the real thing Duro Brand CA glue recommended. The transformers in this kit feature our large sized transformers.
A word about our Power Pole Kits: A 30 Ft. HO Scaled pole would be 4.1 inches in height. A 40 Ft. pole would be 5.5 inches. These poles are sharpened on the base and are slightly taller than these dimensions to allow for pole insertion into your scenery.
HO FGE 57Ft Mechanical Reefer - DCC & Sound - BNSF #795010
Detailed Information
57Ft MECHANICAL REEFER FEATURES:
Available with onboard SoundTraxx sound
Scaled from prototype manufacturers drawings and field measurements
Repaints often vary by road number in the size and style of the reporting marks, car numbers and patch shapes
See-through protective screens on the genset end
Detroit Diesel 2-71 Genset visible inside
End wall corrugation visible inside
Inner refrigerator bulkhead
See through end platforms
Two different exhaust stack types: straight pipe with -flapper- or T-shaped -smokejack- per prototype and era
Full underframe detail including Keystone cushioning, air brake reservoir, control valve, brake cylinder, brake plumbing, and fuel tank
Factory applied end ladders and door closure rods
Trainline hoses with silver ends
Three different coupler cut lever styles per prototype
Body-mounted or truck-mounted brakes per prototype
McHenry operating scale knuckle couplers
100-ton roller bearing trucks with rotating bearing caps
Fully-assembled and ready-to-run
Accurately painted and printed for prototypical realism
Highly-detailed, injection-molded body
Machined metal wheels with RP25 contours
Weighted for trouble-free operation
Minimum radius: 18inch - Recommended radius: 22inch
PRIMED FOR GRIME MODELS FEATURE
Duplicated look and feel of -In Service- equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE
Sound recorded from actual genset
Sound randomly cycles on and off
Utilizes minimum track power
Raise and lower the volume by adjusting the potentiometer
Large Spotlight - Just Plug - pkg (2)
HO EMD F40PH - DCC & Sound - Grand Canyon Railway #237
Product Information
Power your favorite Amtrak(R) or regional commuter trains in style with a WalthersMainline F40PH on the job! Built especially for passenger duties, the prototypes entered service in 1976 and many are still going strong today. Based on Phase 2b prototypes, the models feature:
One time run of these roadnumbers, order now - limited quantity available
Factory-installed vertical hand rails
Molded drill starter points for grab irons (sold separately)
RP-25 metal wheels
Proto MAX(TM) metal knuckle couplers
Fully assembled
21mtc connector
ESU Sound for DCC and DC layouts featuring:
- 4 function outputs with brightness control by CV
- Fully DCC compatible
- 14, 28, 128 speed steps
- Dual mode DC and DCC
- 4 air horns changeable by CVs
- 2 bells changeable by CVs
- Full 8-notch prime mover sounds
- Compressor
- Dynamic brake
Same powerful drive as WalthersProto(R) locos featuring
- Five-pole skew-wound motor
- 14:1 gear ratio
- Helical-cut gears for quiet operation and easy multiple unit operation
- All-wheel drive and electrical pickup
- Heavy die-cast metal chassis
- Constant and directional LED lights
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use power packs that exceed an 18V rating. This includes MRC 1300-series power packs which have known issues with our decoders.
Alternate horns and bell sounds can be programmed on the sound decoder using these CVs:
Horns: CV163 = 0 - Nathan K5LH (default)
CV163 = 1 - Nathan K5HLL
CV163 = 2 - Nathan K5H
CV163 = 3 - Nathan K5LLA
Bells: CV164 = 0 - Graham White E-Bell (default)
CV164 = 1 - GE Steel Bell
HO 5820 Covered Hopper - EHSX (Essex Hybrid) (3pk)
Includes the following numbers, all individually packaged:
#122857
#123034
#123054
Era: 2005+
The Procor 5820 Covered Hopper features:
- Three styles of roof hatches: round, round with ribs and 20 inch vented cover
- Two styles of outlet gates: pneumatic and Miner
- Etched roof walks and end walkways
- Separate grab irons installed at the factory
- Spare hatches and different outlet gates included in polybag to let modeler modify for era
- Full end cage details
- Two styles of trucks: Barber S-2 and Dofasco (Barber S-2 on first run ONLY)
- Accurate paint and lettering
- Multiple road numbers available for each scheme
HO H21E 4-Bay Hopper - Pennsylvania (PRR Black, Plain Keystone) #748099
1961+
The Rapido Trains HO scale H21 Hoppers features:
Accurately scaled from prototype blueprints and photos
K or AB brake systems as appropriate
Die-cast chassis for great operating weight
Full inside and outside rivet detail
Separate wire grab irons
Correct detail variations for each sub-class, including center sill, sides, ends and details
Rapido semi-scale metal couplers
Free-rolling trucks with turned metal wheels
Accurate paint and decoration
So what makes Rapidos different?
Yes, H21 models have been available before. So what makes Rapidos worth the upgrade?
First-ever offering of the H21E!
State-of-the-art modern tooling with crisp details.
Full and correct interior detail, quite visible on an HO hopper.
Full separate grab irons and details (rather than molded on) making them comparable with most current freight car models.
All-metal semi-scale couplers provide improved appearance and operation.
Free rolling turned metal wheels installed at the factory.
Evergreen Scale Models - Opaque White Polystyrene Half Round .06In x 14In (5 pcs pkg)
N Scale 48ft Rib-Side Container - APC #482013
These 48ft rib-side containers are aluminum with red vertical band and large Red Eagle logo on both sides. At 48ft in length, these containers are commonly seen filling the space in the bottom position of intermodal well-cars, with equal-length or longer containers above them. Now branded American President Lines, APL operates container ships, and intermodal rail and truck services around the world.
U23B Gold DCC/Sound - C&O Chessie #2309
MASTER MODEL FEATURES:
Snow plow (included when appropriate per road name)
Separately-applied scale detail parts include: windshield wipers, metal grab irons, coupler cut levers, multiple-unit hoses, trainline hoses, fine scale handrails, drop steps and more!
Five pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting with Golden-white LED s
Blackened metal wheels
Additional features:
21-pin Socket for DCC (Silver Series Model)
Detailed cab interior with crew
Exceptional painting and printing
Factory-equipped with AccuMate knuckle couplers
DCC Operation Features:
Supports all DCC-programming modes
Flexible mapping of function keys F0 to F28.
Follows all NMRA DCC standards and recommended practices