Athearn Genesis G70667 HO SD70M CSX/YN3 DCCw.Tsunami Sound No.4699
HO SD70M CSX YN3
Athearn Genesis G70666 HO SD70M CSX/YN3 DCCw.Tsunami Sound No.4696
HO SD70M CSX YN3
Athearn Genesis G70665 HO SD70M CSX/YN3 DCCw.Tsunami Sound No.4689
HO SD70M CSX YN3
Athearn Roundhouse 12630 HO GP38-2 HLCX DCC No.3849
Athearn Roundhouse HO GP38-2 HLCX
Athearn Roundhouse 12629 HO GP38-2 HLCX DCC No.3839
Athearn Roundhouse HO GP38-2 HLCX
Athearn Roundhouse 12628 HO GP38-2 HLCX DCC No.3828
Athearn Roundhouse HO GP38-2 HLCX
Athearn Roundhouse 12627 HO GP38-2 GATX Black and Blue, DCC No.2246
Athearn Roundhouse HO GP38-2 GATX
Athearn Roundhouse 12626 HO GP38-2 GATX Black and Blue, DCC No.2344
Athearn Roundhouse HO GP38-2 GATX
Athearn Roundhouse 12625 HO GP38-2 GATX Black and Blue, DCC No.2339
Athearn Roundhouse HO GP38-2 GATX
Athearn Roundhouse 12624 HO GP38-2 GATX Black and Blue, DCC No.2103
Athearn Roundhouse HO GP38-2 GATX
Athearn Genesis G70558 HO SD70M EMDX Maroon/Silver DCC Ready No.7020
HO SD70M EMDX
Athearn Genesis G70557 HO SD70M EMDX Maroon/Silver DCC Ready No.7017
HO SD70M EMDX
Athearn Genesis G70556 HO SD70M EMDX Maroon/Silver DCC Ready No.7006
HO SD70M EMDX
Athearn Genesis G70555 HO SD70M EMDX Maroon/Silver DCC Ready No.7003
HO SD70M EMDX
Athearn Genesis G70658 HO SD70M EMDX Maroon/Silver DCC w/Tsunami2 Sound No.7020
HO SD70M EMDX
Athearn Genesis G70657 HO SD70M EMDX Maroon/Silver DCC w/Tsunami2 Sound No.7017
HO SD70M EMDX
Athearn Genesis G70656 HO SD70M EMDX Maroon/Silver DCC w/Tsunami2 Sound No.7006
HO SD70M EMDX
Athearn Genesis G70655 HO SD70M EMDX Maroon/Silver DCC w/Tsunami2 Sound No.7003
HO SD70M EMDX
Rapido 223516 HO GMD F9B with ESU LokSound DCC, CPR/8 in Red Stripes No.4478
HO GMD F9B with ESU LokSound DCC, CPR/8 in Red Stripes
Rapido 223513 HO GMD F7B with ESU LokSound DCC, CPR/8 in Red Stripes No.4427
HO GMD F7B with ESU LokSound DCC, CPR/8 in Red Stripes
Rapido 223512 HO GMD F9B with ESU LokSound DCC, CPR/5 in Red Stripes No.4475
HO GMD F9B with ESU LokSound DCC, CPR/5 in Red Stripes
Rapido 223510 HO GMD F7B with ESU LokSound DCC, CPR/5 in Red Stripes No.4442
HO GMD F7B with ESU LokSound DCC, CPR/5 in Red Stripes
Rapido 223509 HO GMD F7B with ESU LokSound DCC, CPR/5 in Red Stripes No.4431
HO GMD F7B with ESU LokSound DCC, CPR/5 in Red Stripes
Rapido 044032 HO FM H16-44, Standard DC, Canadian Pacific No.8724
HO FM H16-44, Standard DC, Canadian Pacific
Rapido 044031 HO FM H16-44, Standard DC, Canadian Pacific No.8721
HO FM H16-44, Standard DC, Canadian Pacific
Rapido 044030 HO FM H16-44, Standard DC, Canadian Pacific No.8713
HO FM H16-44, Standard DC, Canadian Pacific
Rapido 044531 HO FM H16.44, With Sound & DCC, Canadian Pacific No.8721
HO FM H16.44, With Sound & DCC, Canadian Pacific
Rapido 044530 HO FM H16.44, With Sound & DCC, Canadian Pacific No.8713
HO FM H16.44, With Sound & DCC, Canadian Pacific
Rapido 044529 HO FM H16.44, With Sound & DCC, Canadian Pacific No.8710
HO FM H16.44, With Sound & DCC, Canadian Pacific
Rapido 044028 HO FM H16-44, Standard DC, Canadian National As Delivered Scheme No.2213
HO FM H16-44, Standard DC, Canadian National As Delivered Scheme
Rapido 044027 HO FM H16-44, Standard DC, Canadian National As Delivered Scheme No.2210
HO FM H16-44, Standard DC, Canadian National As Delivered Scheme
Rapido 044026 HO FM H16-44, Standard DC, Canadian National As Delivered Scheme No.2206
HO FM H16-44, Standard DC, Canadian National As Delivered Scheme
Rapido 044025 HO FM H16-44, Standard DC, Canadian National As Delivered Scheme No.2203
HO FM H16-44, Standard DC, Canadian National As Delivered Scheme
Rapido 044528 HO FM H16.44, With Sound & DCC, Canadian National As Delivered No.2213
HO FM H16.44, With Sound & DCC, Canadian National As Delivered
Rapido 044527 HO FM H16.44, With Sound & DCC, Canadian National As Delivered No.2210
HO FM H16.44, With Sound & DCC, Canadian National As Delivered
Rapido 044526 HO FM H16.44, With Sound & DCC, Canadian National As Delivered No.2206
HO FM H16.44, With Sound & DCC, Canadian National As Delivered
Rapido 044525 HO FM H16.44, With Sound & DCC, Canadian National As Delivered No.2203
HO FM H16.44, With Sound & DCC, Canadian National As Delivered
Rapido 044024 HO FM H16-44, Standard DC, Virginian As Delivered Scheme No.49
HO FM H16-44, Standard DC, Virginian As Delivered Scheme
Rapido 044022 HO FM H16-44, Standard DC, Virginian As Delivered Scheme No.42
HO FM H16-44, Standard DC, Virginian As Delivered Scheme
Rapido 044021 HO FM H16-44, Standard DC, Virginian As Delivered Scheme No.39
HO FM H16-44, Standard DC, Virginian As Delivered Scheme
Rapido 044524 HO FM H16.44, With Sound & DCC, Virginian Yellow & Black Scheme No.49
HO FM H16.44, With Sound & DCC, Virginian Yellow & Black Scheme
Rapido 044523 HO FM H16.44, With Sound & DCC, Virginian Yellow & Black Scheme No.47
HO FM H16.44, With Sound & DCC, Virginian Yellow & Black Scheme
Rapido 044522 HO FM H16.44, With Sound & DCC, Virginian Yellow & Black Scheme No.42
HO FM H16.44, With Sound & DCC, Virginian Yellow & Black Scheme
Rapido 044520 HO FM H16.44, With Sound & DCC, Penn Central Black Scheme No.5170
HO FM H16.44, With Sound & DCC, Penn Central Black Scheme
Rapido 044519 HO FM H16.44, With Sound & DCC, Penn Central Black Scheme No.5166
HO FM H16.44, With Sound & DCC, Penn Central Black Scheme
Rapido 044518 HO FM H16.44, With Sound & DCC, Penn Central Black Scheme No.5163
HO FM H16.44, With Sound & DCC, Penn Central Black Scheme
Rapido 044517 HO FM H16.44, With Sound & DCC, Penn Central Black Scheme No.5161
HO FM H16.44, With Sound & DCC, Penn Central Black Scheme
Rapido 044516 HO FM H16.44, With Sound & DCC, Norfolk & Western Blue Scheme No.144
HO FM H16.44, With Sound & DCC, Norfolk & Western Blue Scheme
Rapido 044515 HO FM H16.44, With Sound & DCC, Norfolk & Western Blue Scheme No.143
HO FM H16.44, With Sound & DCC, Norfolk & Western Blue Scheme
Rapido 044514 HO FM H16.44, With Sound & DCC, Norfolk & Western Blue Scheme No.141
HO FM H16.44, With Sound & DCC, Norfolk & Western Blue Scheme
Rapido 044513 HO FM H16.44, With Sound & DCC, Norfolk & Western Blue Scheme No.139
HO FM H16.44, With Sound & DCC, Norfolk & Western Blue Scheme
Rapido 044512 HO FM H16.44, With Sound & DCC, New Haven McGinnis Scheme No.1612
HO FM H16.44, With Sound & DCC, New Haven McGinnis Scheme
Rapido 044510 HO FM H16.44, With Sound & DCC, New Haven McGinnis Scheme No.1605
HO FM H16.44, With Sound & DCC, New Haven McGinnis Scheme
Rapido 044509 HO FM H16.44, With Sound & DCC, New Haven McGinnis Scheme No.1600
HO FM H16.44, With Sound & DCC, New Haven McGinnis Scheme
Rapido 044506 HO FM H16.44, With Sound & DCC, Milwaukee Road Orange & Black Scheme No.432
HO FM H16.44, With Sound & DCC, Milwaukee Road Orange & Black Scheme
Soundtraxx 810159 - JST 21-PNEM Adapter
Soundtraxx 810159 - JST 21-PNEM Adapter
Rapido 083619 - HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - CSX #9998
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - CSX #9998
Rapido 083117 - HO EMD F40PH Ph2 w/ditch lights - DCC Ready - AMT Montreal Transit #274
HO EMD F40PH Ph2 w/ditch lights - DCC Ready - AMT Montreal Transit #274
Rapido 083617 - HO EMD F40PH Ph2 w/ditch lights - DCC/SOund - AMT Montreal Transit #274
HO EMD F40PH Ph2 w/ditch lights - DCC/SOund - AMT Montreal Transit #274
Rapido 083616 - HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - AMT Montreal Transit #271
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - AMT Montreal Transit #271
Rapido 083615 - HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - Agawa Canyon #106
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - Agawa Canyon #106
Rapido 083614 - HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - Agawa Canyon #105
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - Agawa Canyon #105
Rapido 083613 - HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #289
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #289
Rapido 083612 - HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #283
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #283
Rapido 083611 - HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #242
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #242
Evergreen Scale Models 9905 - .010in Combo Transparent Polystyrene Sheet Pack (5 Sheets)
Evergreen Scale Models 9905 - .010in Combo Transparent Polystyrene Sheet Pack (5 Sheets)
Evergreen Scale Models 9904 - .010in Yellow Transparent Polystyrene Sheet (2 Sheets)
Evergreen Scale Models 9904 - .010in Yellow Transparent Polystyrene Sheet (2 Sheets)
Evergreen Scale Models 9903 - .010in Green Transparent Polystyrene Sheet (2 Sheets)
Evergreen Scale Models 9903 - .010in Green Transparent Polystyrene Sheet (2 Sheets)
Evergreen Scale Models 9902 - .010in Blue Transparent Polystyrene Sheet (2 Sheets)
Evergreen Scale Models 9902 - .010in Blue Transparent Polystyrene Sheet (2 Sheets)
Evergreen Scale Models 9901 - .010in Red Transparent Polystyrene Sheet (2 Sheets)
Evergreen Scale Models 9901 - .010in Red Transparent Polystyrene Sheet (2 Sheets)
Evergreen Scale Models 9125 - .125in Plain Opaque White Polystyrene Sheet (1 Sheet)
Evergreen Scale Models 9125 - .125in Plain Opaque White Polystyrene Sheet (1 Sheet)
Evergreen Scale Models 9100 - .100in Plain Opaque White Polystyrene Sheet (1 Sheet)
Evergreen Scale Models 9100 - .100in Plain Opaque White Polystyrene Sheet (1 Sheet)
Evergreen Scale Models 9080 - .080in Plain Opaque White Polystyrene Sheet (1 Sheet)
Evergreen Scale Models 9080 - .080in Plain Opaque White Polystyrene Sheet (1 Sheet)
Evergreen Scale Models 9060 - .060in Plain Opaque White Polystyrene Sheet (1 Sheet)
Evergreen Scale Models 9060 - .060in Plain Opaque White Polystyrene Sheet (1 Sheet)
Evergreen Scale Models 9030 - .030in Plain Opaque White Polystyrene Sheet (2 Sheets)
Evergreen Scale Models 9030 - .030in Plain Opaque White Polystyrene Sheet (2 Sheets)
Evergreen Scale Models 9020 - .020in Plain Opaque White Polystyrene Sheet (3 Sheets)
Evergreen Scale Models 9020 - .020in Plain Opaque White Polystyrene Sheet (3 Sheets)
Evergreen Scale Models 9015 - .015in Plain Opaque White Polystyrene Sheet (3 Sheets)
Evergreen Scale Models 9015 - .015in Plain Opaque White Polystyrene Sheet (3 Sheets)
Evergreen Scale Models 9010 - .010in Plain Opaque White Polystyrene Sheet (4 Sheets)
Evergreen Scale Models 9010 - .010in Plain Opaque White Polystyrene Sheet (4 Sheets)
Evergreen Scale Models 9009 - .005in Plain Opaque White Polystyrene Sheet (3 Sheets)
Evergreen Scale Models 9009 - .005in Plain Opaque White Polystyrene Sheet (3 Sheets)
Evergreen Scale Models 9008 - Plain Opaque White Polystyrene Three Sheet Assortment Pack
Evergreen Scale Models 9008 - Plain Opaque White Polystyrene Three Sheet Assortment Pack
Evergreen Scale Models 9007 - .015in Clear Oriented Polystyrene Sheet (2 Sheets)
Evergreen Scale Models 9007 - .015in Clear Oriented Polystyrene Sheet (2 Sheets)
Evergreen Scale Models 9006 - .010in Clear Oriented Polystyrene Sheet (2 Sheets)
Evergreen Scale Models 9006 - .010in Clear Oriented Polystyrene Sheet (2 Sheets)
Evergreen Scale Models 9005 - .005in Clear Oriented Polystyrene Sheet (3 Sheets)
Evergreen Scale Models 9005 - .005in Clear Oriented Polystyrene Sheet (3 Sheets)
Evergreen Scale Models 4544 - .125in Opaque White Polystyrene Board and Batten Siding (1 Sheet)
.125in Opaque White Polystyrene Board and Batten Siding (1 Sheet)
Evergreen Scale Models 4543 - .100in Opaque White Polystyrene Board and Batten Siding (1 Sheet)
.100in Opaque White Polystyrene Board and Batten Siding (1 Sheet)
Evergreen Scale Models 4542 - .075in Opaque White Polystyrene Board and Batten Siding (1 Sheet)
.075in Opaque White Polystyrene Board and Batten Siding (1 Sheet)
Evergreen Scale Models 4530 - .125in Opaque White Polystyrene Corrugated Siding (1 Sheet)
.125in Opaque White Polystyrene Corrugated Siding (1 Sheet)
Evergreen Scale Models 4528 - .080in Opaque White Polystyrene Corrugated Siding (1 Sheet)
.080in Opaque White Polystyrene Corrugated Siding (1 Sheet)
Evergreen Scale Models 4527 - .060in Opaque White Polystyrene Corrugated Siding (1 Sheet)
.060in Opaque White Polystyrene Corrugated Siding (1 Sheet)
Evergreen Scale Models 4526 - .040in Opaque White Polystyrene Corrugated Siding (1 Sheet)
.040in Opaque White Polystyrene Corrugated Siding (1 Sheet)
Evergreen Scale Models 4525 - .030in Opaque White Polystyrene Corrugated Siding (1 Sheet)
.030in Opaque White Polystyrene Corrugated Siding (1 Sheet)
Evergreen Scale Models 4524 - .040in x .500in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
.040in x .500in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
Evergreen Scale Models 4523 - .040in x .375in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
.040in x .375in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
Evergreen Scale Models 4522 - .040in x .250in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
.040in x .250in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
Evergreen Scale Models 4521 - .040in x .1875in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
.040in x .1875in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
Evergreen Scale Models 4518 - 1/2in x 1/2in Opaque White Polystyrene Sidewalk (1 Sheet)
Styrene Sidewalk Sheet - 1/2in x 1/2in Opaque White Polystyrene Sidewalk (1 Sheet)
Evergreen Scale Models 4517 - 3/8in x 3/8in Opaque White Polystyrene Sidewalk (1 Sheet)
Styrene Sidewalk Sheet - 3/8in x 3/8in Opaque White Polystyrene Sidewalk (1 Sheet)
Evergreen Scale Models 4516 - 1/4in x 1/4in Opaque White Polystyrene Sidewalk (1 Sheet)
Styrene Sidewalk Sheet - 1/4in x 1/4in Opaque White Polystyrene Sidewalk (1 Sheet)
Evergreen Scale Models 4515 - 3/16in x 3/16in Opaque White Polystyrene Sidewalk (1 Sheet)
Styrene Sidewalk Sheet - 3/16in x 3/16in Opaque White Polystyrene Sidewalk (1 Sheet)
Evergreen Scale Models 4507 - 1/2in x 1/2in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4507 - 1/2in x 1/2in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4506 - 1/3in x 1/3in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4506 - 1/3in x 1/3in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4505 - 1/4in x 1/4in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4505 - 1/4in x 1/4in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4504 - 1/6in x 1/6in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4504 - 1/6in x 1/6in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4503 - 1/8in x 1/8in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4503 - 1/8in x 1/8in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4502 - 1/12in x 1/12in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4502 - 1/12in x 1/12in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4501 - 1/16in x 1/16in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4501 - 1/16in x 1/16in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4250 .250in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4250 .250in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4188 .188in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4188 .188in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4150 .150in Opaque White Polystyrene Novelty Siding (1sheet)
Evergreen Scale Models 4150 .150in Opaque White Polystyrene Novelty Siding (1sheet)
AK Interactive 600 - Size 5/0 Synthetic Round Brush
Size 5/0 Synthetic Round Brush
Evergreen Scale Models 4125 .125in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4125 .125in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4109 .109in Opaque White Polystyrene Novelty Siding (1sheet)
Evergreen Scale Models 4109 .109in Opaque White Polystyrene Novelty Siding (1sheet)
Evergreen Scale Models 4101 .100in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4101 .100in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4100 .100in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4100 .100in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4083 .083in Opaque White polystyrene Novelty Siding (1Sheet)
Evergreen Scale Models 4083 .083in Opaque White polystyrene Novelty Siding (1Sheet)
Evergreen Scale Models 4081 .080in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4081 .080in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4080 .080in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4080 .080in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4067 .067in Opaque White Polystyrene O Scale Freight Car Siding (1sheet)
Evergreen Scale Models 4067 .067in Opaque White Polystyrene O Scale Freight Car Siding (1sheet)
Evergreen Scale Models 4062 .060in Opeque White Polystyrene Novelty Siding (1sheet)
Evergreen Scale Models 4062 .060in Opeque White Polystyrene Novelty Siding (1sheet)
Evergreen Scale Models 4061 .060in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4061 .060in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4060 0.60in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4060 0.60in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4051 .050in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4051 .050in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4050 .050in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4050 .050in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4041 .040in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4041 .040in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4040 .040in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4040 .040in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4037 .037in Opaque White Polystyrene HO scale Freight Car Siding (1sheet)
Evergreen Scale Models 4037 .037in Opaque White Polystyrene HO scale Freight Car Siding (1sheet)
Evergreen Scale Models 4031 0.30in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4031 0.30in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4030 .030in Opaque White Polystyrene V Groove Siding (1 Sheet)
Evergreen Scale Models 4030 .030in Opaque White Polystyrene V Groove Siding (1 Sheet)
Evergreen Scale Models 3047 .047in Opaque White Polystyrene Passenger Car Siding (1Sheet)
Evergreen Scale Models 3047 .047in Opaque White Polystyrene Passenger Car Siding (1Sheet)
Evergreen Scale Models 3035 .035in Opaque White Polystyrene Passenger Car Siding (1sheet)
Evergreen Scale Models 3035 .035in Opaque White Polystyrene Passenger Car Siding (1sheet)
Evergreen Scale Models 3025 .025in Opaque White Polystyrene Passenger Car Siding (1sheet)
Evergreen Scale Models 3025 .025in Opaque White Polystyrene Passenger Car Siding (1sheet)
Evergreen Scale Models 2125 .125in Opaque White Polystyrene V Groove Siding (1 Sheet)
Evergreen Scale Models 2125 .125in Opaque White Polystyrene V Groove Siding (1 Sheet)
Evergreen Scale Models 2100 .100in Opaque White Polystrene V Groove Siding (1 Sheet)
Evergreen Scale Models 2100 .100in Opaque White Polystrene V Groove Siding (1 Sheet)
Evergreen Scale Models 2080 .080in Opaque White Polystyrene V Groove Siding (1Sheet)
Evergreen Scale Models 2080 .080in Opaque White Polystyrene V Groove Siding (1Sheet)
Evergreen Scale Models 2067 .067in Opaque White Polystyrene O Scale Freight Car Siding (1 Sheet)
Evergreen Scale Models 2067 .067in Opaque White Polystyrene O Scale Freight Car Siding (1 Sheet)
Evergreen Scale Models 2060 .060in Opaque White Polystyrene V Groove Siding (1 Sheet)
Evergreen Scale Models 2060 .060in Opaque White Polystyrene V Groove Siding (1 Sheet)
Evergreen Scale Models 2050 .050in Opaque White Polystyrene V Groove Siding (1 Sheet)
Evergreen Scale Models 2050 .050in Opaque White Polystyrene V Groove Siding (1 Sheet)
Evergreen Scale Models 2040 .040in Opaque White Polystyrene V Groove Siding (1 sheet)
Evergreen Scale Models 2040 .040in Opaque White Polystyrene V Groove Siding (1 sheet)
Evergreen Scale Models 2037 .037in Opaque White Polystyrene HO Scale Freight Car Siding (1 Sheet Pack)
Evergreen Scale Models 2037 .037in Opaque White Polystyrene HO Scale Freight Car Siding (1 Sheet Pack)
Evergreen Scale Models 2030 .30in Opaque White Polystyrene V Groove Siding (1 Sheet pack)
Evergreen Scale Models 2030 .30in Opaque White Polystyrene V Groove Siding (1 Sheet pack)
Evergreen Scale Models 2025 - Opaque White Polystyrene V Groove Siding 0.025in(1 piece)
Evergreen Scale Models 2025 - Opaque White Polystyrene V Groove Siding 0.025in(1 piece)
Evergreen Scale Models 2020 - Opaque White Polystyrene N Scale Freight Car Siding .020In x 6In x 12In (1 sheet pkg)
Evergreen Scale Models - Opaque White Polystyrene N Scale Freight Car Siding .020In x 6In x 12In (1 sheet pkg)
Evergreen Scale Models 9517 - Plain Opaque Black Polystyrene Sheet .080In x 6In x 12In (1 pc pkg)
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .080In x 6In x 12In (1 pc pkg)
Evergreen Scale Models 9516 - Plain Opaque Black Polystyrene Sheet .060In x 6In x 12In (1 pc pkg)
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .060In x 6In x 12In (1 pc pkg)
Evergreen Scale Models 9515 - Plain Opaque Black Polystyrene Sheet .040In x 6In x 12In (2 pcs pkg)
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .040In x 6In x 12In (2 pcs pkg)
Evergreen Scale Models 9514 - Plain Opaque Black Polystyrene Sheet .030In x 6In x 12In (2 pcs pkg)
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .030In x 6In x 12In (2 pcs pkg)
Evergreen Scale Models 9513 - Plain Opaque Black Polystyrene Sheet .020In x 6In x 12In (3 pcs pkg)
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .020In x 6In x 12In (3 pcs pkg)
Evergreen Scale Models 9511 - Plain Opaque Black Polystyrene Sheet .010In x 6In x 12In (4 pcs pkg)
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .010In x 6In x 12In (4 pcs pkg)
Evergreen Scale Models 8612 - Opaque White Polystyrene HO Scale Strips (6x12) .066In x .135In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (6x12) .066In x .135In x 14In (10 pcs pkg)
Evergreen Scale Models 8610 - Opaque White Polystyrene HO Scale Strips (6x10) .066In x .112In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (6x10) .066In x .112In x 14In (10 pcs pkg)
Evergreen Scale Models 8608 - Opaque White Polystyrene HO Scale Strips (6x8) .066In x .090In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (6x8) .066In x .090In x 14In (10 pcs pkg)
Evergreen Scale Models 8606 - Opaque White Polystyrene HO Scale Strips (6x6) .066In x .066In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (6x6) .066In x .066In x 14In (10 pcs pkg)
Evergreen Scale Models 8412 - Opaque White Polystyrene HO Scale Strips (4x12) .043In x .135In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (4x12) .043In x .135In x 14In (10 pcs pkg)
Evergreen Scale Models 8410 - Opaque White Polystyrene HO Scale Strips (4x10) .043In x .112In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (4x10) .043In x .112In x 14In (10 pcs pkg)
Evergreen Scale Models 8408 - Opaque White Polystyrene HO Scale Strips (4x8) .043In x .090In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (4x8) .043In x .090In x 14In (10 pcs pkg)
Evergreen Scale Models 8406 - Opaque White Polystyrene HO Scale Strips (4x6) .043In x .066In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (4x6) .043In x .066In x 14In (10 pcs pkg)
Evergreen Scale Models 8404 - Opaque White Polystyrene HO Scale Strips (4x4) .043In x .043In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (4x4) .043In x .043In x 14In (10 pcs pkg)
Evergreen Scale Models 8212 - Opaque White Polystyrene HO Scale Strips (2x12) .022In x .135In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x12) .022In x .135In x 14In (10 pcs pkg)
Evergreen Scale Models 8210 - Opaque White Polystyrene HO Scale Strips (2x10) .022In x .112In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x10) .022In x .112In x 14In (10 pcs pkg)
Evergreen Scale Models 8208 - Opaque White Polystyrene HO Scale Strips (2x8) .022In x .090In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x8) .022In x .090In x 14In (10 pcs pkg)
Evergreen Scale Models 8206 - Opaque White Polystyrene HO Scale Strips (2x6) .022In x .066In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x6) .022In x .066In x 14In (10 pcs pkg)
Evergreen Scale Models 8204 - Opaque White Polystyrene HO Scale Strips (2x4) .022In x .043In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x4) .022In x .043In x 14In (10 pcs pkg)
Evergreen Scale Models 8203 - Opaque White Polystyrene HO Scale Strips (2x3) .022In x .033In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x3) .022In x .033In x 14In (10 pcs pkg)
Evergreen Scale Models 8202 - Opaque White Polystyrene HO Scale Strips (2x2) .022In x .022In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x2) .022In x .022In x 14In (10 pcs pkg)
Evergreen Scale Models 8112 - Opaque White Polystyrene HO Scale Strips (1x12) .011In x .135In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x12) .011In x .135In x 14In (10 pcs pkg)
Evergreen Scale Models 8110 - Opaque White Polystyrene HO Scale Strips (1x10) .011In x .112In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x10) .011In x .112In x 14In (10 pcs pkg)
Evergreen Scale Models 8108 - Opaque White Polystyrene HO Scale Strips (1x8) .011In x .090In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x8) .011In x .090In x 14In (10 pcs pkg)
Evergreen Scale Models 8106 - Opaque White Polystyrene HO Scale Strips (1x6) .011In x .066In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x6) .011In x .066In x 14In (10 pcs pkg)
Evergreen Scale Models 8104 - Opaque White Polystyrene HO Scale Strips (1x4) .011In x .043In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x4) .011In x .043In x 14In (10 pcs pkg)
Evergreen Scale Models 8103 - Opaque White Polystyrene HO Scale Strips (1x3) .011In x .033In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x3) .011In x .033In x 14In (10 pcs pkg)
Evergreen Scale Models 8102 - Opaque White Polystyrene HO Scale Strips (1x2) .011In x .022In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x2) .011In x .022In x 14In (10 pcs pkg)
Evergreen Scale Models 769 - Opaque White Polystyrene T Shape .321In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .321In x 14In (2 pcs pkg)
Evergreen Scale Models 768 - Opaque White Polystyrene T Shape .257In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .257In x 14In (2 pcs pkg)
Evergreen Scale Models 767 - Opaque White Polystyrene T Shape .198In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .198In x 14In (3 pcs pkg)
Evergreen Scale Models 766 - Opaque White Polystyrene T Shape .141In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .141In x 14In (3 pcs pkg)
Evergreen Scale Models 765 - Opaque White Polystyrene T Shape .123In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .123In x 14In (3 pcs pkg)
Evergreen Scale Models 764 - Opaque White Polystyrene T Shape .092In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .092In x 14In (4 pcs pkg)
Evergreen Scale Models 763 - Opaque White Polystyrene T Shape .073In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .073In x 14In (4 pcs pkg)
Evergreen Scale Models 762 - Opaque White Polystyrene T Shape .056In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .056In x 14In (4 pcs pkg)
Evergreen Scale Models 761 - Opaque White Polystyrene T Shape .035In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .035In x 14In (4 pcs pkg)
Evergreen Scale Models 757 - Opaque White Polystyrene Z Channel .250In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Z Channel .250In x 14In (2 pcs pkg)
Evergreen Scale Models 756 - Opaque White Polystyrene Z Channel .188In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Z Channel .188In x 14In (3 pcs pkg)
Evergreen Scale Models 755 - Opaque White Polystyrene Z Channel .156In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Z Channel .156In x 14In (3 pcs pkg)
Evergreen Scale Models 754 - Opaque White Polystyrene Z Channel .125In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Z Channel .125In x 14In (3 pcs pkg)
Evergreen Scale Models 753 - Opaque White Polystyrene Z Channel .100In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Z Channel .100In x 14In (4 pcs pkg)
Evergreen Scale Models 752 - Opaque White Polystyrene Z Channel .080In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Z Channel .080In x 14In (4 pcs pkg)
Evergreen Scale Models 751 - Opaque White Polystyrene Z Channel .060In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Z Channel .060In x 14In (4 pcs pkg)
Evergreen Scale Models 297 - Opaque White Polystyrene Angle .250In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Angle .250In x 14In (2 pcs pkg)
Evergreen Scale Models 295 - Opaque White Polystyrene Angle .156In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Angle .156In x 14In (3 pcs pkg)
Evergreen Scale Models 294 - Opaque White Polystyrene Angle .125In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Angle .125In x 14In (3 pcs pkg)
Evergreen Scale Models 293 - Opaque White Polystyrene Angle .100In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Angle .100In x 14In (4 pcs pkg)
Evergreen Scale Models 292 - Opaque White Polystyrene Angle .080In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Angle .080In x 14In (4 pcs pkg)
Evergreen Scale Models 291 - Opaque White Polystyrene Angle .060In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Angle .060In x 14In (4 pcs pkg)
Evergreen Scale Models 286 - Opaque White Polystyrene H-Column .188In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene H-Column .188In x 14In (3 pcs pkg)
Evergreen Scale Models 285 - Opaque White Polystyrene H-Column .156In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene H-Column .156In x 14In (3 pcs pkg)
Evergreen Scale Models 284 - Opaque White Polystyrene H-Column .125In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene H-Column .125In x 14In (3 pcs pkg)
Evergreen Scale Models 283 - Opaque White Polystyrene H-Column .100In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene H-Column .100In x 14In (4 pcs pkg)
Evergreen Scale Models 282 - Opaque White Polystyrene H-Column .080In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene H-Column .080In x 14In (4 pcs pkg)
Evergreen Scale Models 281 - Opaque White Polystyrene H-Column .060In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene H-Column .060In x 14In (4 pcs pkg)
Evergreen Scale Models 279 - Opaque White Polystyrene I-Beam .375In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .375In x 14In (2 pcs pkg)
Evergreen Scale Models 278 - Opaque White Polystyrene I-Beam .312In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .312In x 14In (2 pcs pkg)
Evergreen Scale Models 277 - Opaque White Polystyrene I-Beam .250In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .250In x 14In (3 pcs pkg)
Evergreen Scale Models 276 - Opaque White Polystyrene I-Beam .188In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .188In x 14In (3 pcs pkg)
Evergreen Scale Models 275 - Opaque White Polystyrene I-Beam .156In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .156In x 14In (3 pcs pkg)
Evergreen Scale Models 273 - Opaque White Polystyrene I-Beam .100In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .100In x 14In (4 pcs pkg)
Evergreen Scale Models 272 - Opaque White Polystyrene I-Beam .080In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .080In x 14In (4 pcs pkg)
Evergreen Scale Models 271 - Opaque White Polystyrene I-Beam .060In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .060In x 14In (4 pcs pkg)
Evergreen Scale Models 268 - Opaque White Polystyrene Channel .312In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .312In x 14In (3 pcs pkg)
Evergreen Scale Models 267 - Opaque White Polystyrene Channel .250In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .250In x 14In (3 pcs pkg)
Evergreen Scale Models 266 - Opaque White Polystyrene Channel .188In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .188In x 14In (3 pcs pkg)
Evergreen Scale Models 265 - Opaque White Polystyrene Channel .156In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .156In x 14In (4 pcs pkg)
Evergreen Scale Models 264 - Opaque White Polystyrene Channel .125In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .125In x 14In (4 pcs pkg)
Evergreen Scale Models 263 - Opaque White Polystyrene Channel .100In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .100In x 14In (4 pcs pkg)
Evergreen Scale Models 262 - Opaque White Polystyrene Channel .080In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .080In x 14In (4 pcs pkg)
Evergreen Scale Models 261 - Opaque White Polystyrene Channel .060In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .060In x 14In (4 pcs pkg)
Rapido 402021 HO - 53Ft High Cube Container - Clarke- Transforce (2-pack 539630 and 539653)
53Ft High Cube Container - Clarke- Transforce (2-pack 539630 and 539653)
Rapido 402017 HO - 53Ft High Cube Container - CP - Red (2-pack 732333 and 732382)
53Ft High Cube Container - CP - Red (2-pack 732333 and 732382)
Rapido 402016 HO - 53Ft High Cube Container - CP - Gray(2-pack 731775 and 731788)
53Ft High Cube Container - CP - Gray(2-pack 731775 and 731788)
Rapido 402015 HO - 53Ft High Cube Container - CN Intermodal (2-pack 287785 and 287865)
53Ft High Cube Container - CN Intermodal (2-pack 287785 and 287865)
Evergreen Scale Models 259 - Opaque White Polystyrene Rectangular Tubing .250In x .375In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Rectangular Tubing .250In x .375In x 14In (2 pcs pkg)
Evergreen Scale Models 258 - Opaque White Polystyrene Rectangular Tubing .188In x .312In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Rectangular Tubing .188In x .312In x 14In (2 pcs pkg)
Evergreen Scale Models 257 - Opaque White Polystyrene Rectangular Tubing .125In x .250In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Rectangular Tubing .125In x .250In x 14In (3 pcs pkg)
Evergreen Scale Models 256 - Opaque White Polystyrene Square Tubing .375In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Square Tubing .375In x 14In (2 pcs pkg)
Evergreen Scale Models 255 - Opaque White Polystyrene Square Tubing .312In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Square Tubing .312In x 14In (2 pcs pkg)
Evergreen Scale Models 254 - Opaque White Polystyrene Square Tubing .250In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Square Tubing .250In x 14In (2 pcs pkg)
Evergreen Scale Models 253 - Opaque White Polystyrene Square Tubing .188In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Square Tubing .188In x 14In (3 pcs pkg)
Evergreen Scale Models 252 - Opaque White Polystyrene Square Tubing .125In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Square Tubing .125In x 14In (3 pcs pkg)
Evergreen Scale Models 250 - Opaque White Polystyrene Quarter Round .10In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Quarter Round .10In x 14In (3 pcs pkg)
Evergreen Scale Models 249 - Opaque White Polystyrene Quarter Round .08In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Quarter Round .08In x 14In (3 pcs pkg)
Evergreen Scale Models 248 - Opaque White Polystyrene Quarter Round .06In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Quarter Round .06In x 14In (4 pcs pkg)
Evergreen Scale Models 247 - Opaque White Polystyrene Quarter Round .04In x 14In (5 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Quarter Round .04In x 14In (5 pcs pkg)
Evergreen Scale Models 246 - Opaque White Polystyrene Quarter Round .03In x 14In (5 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Quarter Round .03In x 14In (5 pcs pkg)
Evergreen Scale Models 244 - Opaque White Polystyrene Half Round .125In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Half Round .125In x 14In (3 pcs pkg)
Evergreen Scale Models 243 - Opaque White Polystyrene Half Round .10In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Half Round .10In x 14In (3 pcs pkg)
Evergreen Scale Models 242 - Opaque White Polystyrene Half Round .08In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Half Round .08In x 14In (4 pcs pkg)
Evergreen Scale Models 241 - Opaque White Polystyrene Half Round .06In x 14In (5 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Half Round .06In x 14In (5 pcs pkg)
Evergreen Scale Models 240 - Opaque White Polystyrene Half Round .04In x 14In (5 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Half Round .04In x 14In (5 pcs pkg)
Evergreen Scale Models 236 - OD Opaque White Polystyrene Tubing .50In x 14In (2 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .50In x 14In (2 pcs pkg)
Evergreen Scale Models 234 - OD Opaque White Polystyrene Tubing .438In x 14In (2 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .375In x 14In (2 pcs pkg)
Evergreen Scale Models 232 - OD Opaque White Polystyrene Tubing .375In x 14In (2 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .375Inx 14In (2 pcs pkg)
Evergreen Scale Models 231 - OD Opaque White Polystyrene Tubing .344In x 14In (2 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .344In x 14In (2 pcs pkg)
Evergreen Scale Models 230 - OD Opaque White Polystyrene Tubing .312In x 14In (3 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .312In x 14In (3 pcs pkg)
Evergreen Scale Models 229 - OD Opaque White Polystyrene Tubing .281In x 14In (3 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .281In x 14In (3 pcs pkg)
Evergreen Scale Models 228 - OD Opaque White Polystyrene Tubing .250In x 14In (3 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .250In x 14In (3 pcs pkg)
Evergreen Scale Models 227 - OD Opaque White Polystyrene Tubing .219In x 14In (3 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .219In x 14In (3 pcs pkg)
Evergreen Scale Models 226 - OD Opaque White Polystyrene Tubing .188In x 14In (4 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .188In x 14In (4 pcs pkg)
Evergreen Scale Models 225 - OD Opaque White Polystyrene Tubing .156In x 14In (4 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .156In x 14In (4 pcs pkg)
Evergreen Scale Models 223 - OD Opaque White Polystyrene Tubing .093In x 14In (6 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .093In x 14In (6 pcs pkg)
Evergreen Scale Models 222 - OD White Polystyrene Rod .062In x 14In (8 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .062In x 14In (8 pcs pkg)
Evergreen Scale Models 221 - OD White Polystyrene Rod .047In x 14In (10 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .047In x 14In (10 pcs pkg)
Evergreen Scale Models 220 - OD White Polystyrene Rod .035In x 14In (10 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .035In x 14In (10 pcs pkg)
Evergreen Scale Models 219 - OD White Polystyrene Rod .025In x 14In (10 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .025In x 14In (10 pcs pkg)
Evergreen Scale Models 218 - OD White Polystyrene Rod .02In x 14In (10 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .02In x 14In (10 pcs pkg)
Evergreen Scale Models 217 - Opaque White Polystyrene Rod and Tube Assortment (7 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Rod and Tube Assortment (7 pcs pkg)
Evergreen Scale Models 214 - OD White Polystyrene Rod .125In x 14In (4 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .125In x 14In (4 pcs pkg)
Evergreen Scale Models 213 - OD White Polystyrene Rod .10In x 14In (5 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .10In x 14In (5 pcs pkg)
Evergreen Scale Models 212 - OD White Polystyrene Rod .08In x 14In (6 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .08In x 14In (6 pcs pkg)
Evergreen Scale Models 211 - OD White Polystyrene Rod .04In x 14In (10 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .04In x 14In (10 pcs pkg)
Evergreen Scale Models 210 - OD White Polystyrene Rod .03In x 14In (10 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .03In x 14In (10 pcs pkg)
Evergreen Scale Models 199 Opaque White Polystyrene Strips 14in .250x.250 (3pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .250x.250 (3pcs pkg)
Evergreen Scale Models 196 Opaque White Polystyrene Strips 14in .188x.188 (4pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .188x.188 (4pcs pkg)
Evergreen Scale Models 187 Opaque White Polystyrene Strips 14in .125x.156 (6pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .125x.156 (6pcs pkg)
Evergreen Scale Models 189 Opaque White Polystyrene Strips 14in .125x.250 (5pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .125x.250 (5pcs pkg)
Evergreen Scale Models 188 Opaque White Polystyrene Strips 14in .125x.188 (6pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .125x.188 (6pcs pkg)
Evergreen Scale Models 186 Opaque White Polystyrene Strips 14in .125x.125 (6pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .125x.125 (6pcs pkg)
Evergreen Scale Models 179 Opaque White Polystyrene Strips 14in .10x.250 (6pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.250 (6pcs pkg)
Evergreen Scale Models 178 Opaque White Polystyrene Strips 14in .10x.188 (7pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.188 (7pcs pkg)
Evergreen Scale Models 177 Opaque White Polystyrene Strips 14in .10x.156 (7pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.156 (7pcs pkg)
Evergreen Scale Models 176 Opaque White Polystyrene Strips 14in .10x.125 (7pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.125 (7pcs pkg)
Evergreen Scale Models 175 Opaque White Polystyrene Strips 14in .10x.10 (8pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.10 (8pcs pkg)
Evergreen Scale Models 169 Opaque White Polystyrene Strips 14in .08x.250 (7pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.250 (7pcs pkg)
Evergreen Scale Models 168 Opaque White Polystyrene Strips 14in .08x.188 (8pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.188 (8pcs pkg)
Evergreen Scale Models 167 Opaque White Polystyrene Strips 14in .08x.156 (8pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.156 (8pcs pkg)
Evergreen Scale Models 166 Opaque White Polystyrene Strips 14in .08x.125 (8pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.125 (8pcs pkg)
Evergreen Scale Models 165 Opaque White Polystyrene Strips 14in .08x.10 (8pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.10 (8pcs pkg)
Evergreen Scale Models 159 Opaque White Polystyrene Strips 14in .06x.250 (8pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.250 (8pcs pkg)
Evergreen Scale Models 164 Opaque White Polystyrene Strips 14in .08x.08 (9pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.08 (9pcs pkg)
Evergreen Scale Models 158 Opaque White Polystyrene Strips 14in .06x.188 (9pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.188 (9pcs pkg)
Evergreen Scale Models 157 Opaque White Polystyrene Strips 14in .06x.156 (9pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.156 (9pcs pkg)
Evergreen Scale Models 156 Opaque White Polystyrene Strips 14in .06x.125 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.125(10pcs pkg)
Evergreen Scale Models 155 Opaque White Polystyrene Strips 14in .06x.10 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.10 (10pcs pkg)
Evergreen Scale Models 154 Opaque White Polystyrene Strips 14in .06x.08 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.08 (10pcs pkg)
Evergreen Scale Models 153 Opaque White Polystyrene Strips 14in .06x.06 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.06 (10pcs pkg)
Evergreen Scale Models 149 Opaque White Polystyrene Strips 14in .04x.250 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.250 (10pcs pkg)
Evergreen Scale Models 148 Opaque White Polystyrene Strips 14in .04x.188 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.188 (10pcs pkg)
Evergreen Scale Models 147 Opaque White Polystyrene Strips 14in .04x.156 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.156 (10pcs pkg)
Evergreen Scale Models 146 Opaque White Polystyrene Strips 14in .04x.125 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.125 (10pcs pkg)
Evergreen Scale Models 145 Opaque White Polystyrene Strips 14in .04x.10 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.10 (10pcs pkg)
Evergreen Scale Models 144 Opaque White Polystyrene Strips 14in .04x.08 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.08 (10pcs pkg)
Evergreen Scale Models 143 Opaque White Polystyrene Strips 14in .04x.06 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.06 (10pcs pkg)
Evergreen Scale Models 142 Opaque White Polystyrene Strips 14in .04x.04 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.04 (10pcs pkg)
Athearn Genesis G75611 HO - SD60M Diesel Tri-Clops - DCC/Sound - NS #6807
NS #6807
Athearn Genesis G75608 HO - SD60M Diesel Tri-Clops - DCC/Sound - CP #6258
CP #6258
Athearn Genesis G75510 HO - SD60M Diesel Tri-Clops - DCC Ready - CP #6261
CP #6261
Athearn Genesis G75509 HO - SD60M Diesel Tri-Clops - DCC Ready - CP #6260
CP #6260
Athearn Genesis G75508 HO - SD60M Diesel Tri-Clops - DCC Ready - CP #6258
CP #6258
Athearn Genesis G75605 HO - SD60M Diesel Tri-Clops - DCC/Sound - BNSF #9236
BNSF #9236
Athearn Genesis G75604 HO - SD60M Diesel Tri-Clops - DCC/Sound - BNSF #9212
BNSF #9212
Evergreen Scale Models 139 Opaque White Polystyrene Strips 14in .03x.250 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.250 (10pcs pkg)
Evergreen Scale Models 138 Opaque White Polystyrene Strips 14in .03x.188 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.188 (10pcs pkg)
Evergreen Scale Models 137 Opaque White Polystyrene Strips 14in .03x.156 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.156 (10pcs pkg)
Evergreen Scale Models 136 Opaque White Polystyrene Strips 14in .03x.125 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.125 (10pcs pkg)
Evergreen Scale Models 135 Opaque White Polystyrene Strips 14in .03x.10 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.10 (10pcs pkg)
Evergreen Scale Models 134 Opaque White Polystyrene Strips 14in .03x.08 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.08 (10pcs pkg)
Evergreen Scale Models 133 Opaque White Polystyrene Strips 14in .03x.06 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.06 (10pcs pkg)
Evergreen Scale Models 132 Opaque White Polystyrene Strips 14in .03x.04 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.04 (10pcs pkg)
Evergreen Scale Models 131 Opaque White Polystyrene Strips 14in .03x.03 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.03 (10pcs pkg)
Evergreen Scale Models 129 Opaque White Polystyrene Strips 14in .02x.250 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.250 (10pcs pkg)
Evergreen Scale Models 128 Opaque White Polystyrene Strips 14in .02x.188 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.188 (10pcs pkg)
Evergreen Scale Models 127 Opaque White Polystyrene Strips 14in .02x.156 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.156 (10pcs pkg)
Evergreen Scale Models 126 Opaque White Polystyrene Strips 14in .02x.125 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.125 (10pcs pkg)
Evergreen Scale Models 125 Opaque White Polystyrene Strips 14in .02x.10 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.10 (10pcs pkg)
Evergreen Scale Models 124 Opaque White Polystyrene Strips 14in .02x.08 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.08 (10pcs pkg)
Evergreen Scale Models 123 Opaque White Polystyrene Strips 14in .02x.06 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.06 (10pcs pkg)
Evergreen Scale Models 122 Opaque White Polystyrene Strips 14in .02x.04 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.04 (10pcs pkg)
Evergreen Scale Models 121 Opaque White Polystyrene Strips 14in .02x.03 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.03 (10pcs pkg)
Evergreen Scale Models 120 Opaque White Polystyrene Strips 14in .02x.02 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.02 (10pcs pkg)
Evergreen Scale Models 119 Opaque White Polystyrene Strips 14in .015x.250 (10pcs pkg)
Evergreen Scale Models 118 Opaque White Polystyrene Strips 14in .015x.250 (10pcs pkg)
Evergreen Scale Models 118 Opaque White Polystyrene Strips 14in .015x.188 (10pcs pkg)
Evergreen Scale Models 118 Opaque White Polystyrene Strips 14in .015x.188 (10pcs pkg)
Evergreen Scale Models 117 Opaque White Polystyrene Strips 14in .015x.156 (10pcs pkg)
Evergreen Scale Models 117 Opaque White Polystyrene Strips 14in .015x.156 (10pcs pkg)
Evergreen Scale Models 116 Opaque White Polystyrene Strips 14in .015x.125 (10pcs pkg)
Evergreen Scale Models 116 Opaque White Polystyrene Strips
Evergreen Scale Models 115 Opaque White Polystyrene Strips 14in .015x.100 (10pcs pkg)
Evergreen Scale Models 115 Opaque White Polystyrene Strips
Evergreen Scale Models 114 Opaque White Polystyrene Strips 14in .015x.080 (10pcs pkg)
Evergreen Scale Models 114 Opaque White Polystyrene Strips
Evergreen Scale Models 113 Opaque White Polystyrene Strips 14in .015x.060 (10pcs pkg)
Evergreen Scale Models 113 Opaque White Polystyrene Strips
Evergreen Scale Models 112 Opaque White Polystyrene Strips 14in .015x.040 (10pcs pkg)
Evergreen Scale Models 112 Opaque White Polystyrene Strips
Evergreen Scale Models 111 Opaque White Polystyrene Strips 14in .015x.030 (10pcs pkg)
Evergreen Scale Models 111 Opaque White Polystyrene Strips
Evergreen Scale Models 110 Opaque White Polystyrene Strips 14in .015x.020 (10pcs pkg)
Evergreen Scale Models 110 Opaque White Polystyrene Strips
Evergreen Scale Models 109 Opaque White Polystyrene Strips 14in .010x.250 (10pcs pkg)
Evergreen Scale Models 109 Opaque White Polystyrene Strips
Evergreen Scale Models 108 Opaque White Polystyrene Strips 14in .010x.188 (10pcs pkg)
Evergreen Scale Models 108 Opaque White Polystyrene Strips
Evergreen Scale Models 107 Opaque White Polystyrene Strips 14in .010x.156 (10pcs pkg)
Evergreen Scale Models 107 Opaque White Polystyrene Strips
Evergreen Scale Models 106 Opaque White Polystyrene Strips 14in .010x.125 (10pcs pkg)
Evergreen Scale Models 106 Opaque White Polystyrene Strips 14in .010x.125 (10pcs pkg)
Evergreen Scale Models 105 Opaque White Polystyrene Strips 14in .010x.100 (10pcs pkg)
Evergreen Scale Models 105 Opaque White Polystyrene Strips
Evergreen Scale Models 104 Opaque White Polystyrene Strips 14in .010x.080 (10pcs pkg)
Evergreen Scale Models 104 Opaque White Polystyrene Strips
Evergreen Scale Models 103 Opaque White Polystyrene Strips 14in .010x.060 (10pcs pkg)
Evergreen Scale Models 103 Opaque White Polystyrene Strips
Evergreen Scale Models 102 Opaque White Polystyrene Strips 0.010x0.040x14in (10pcs pkg)
Evergreen Scale Models 102 Opaque White Polystyrene Strips 0.010x0.040x14in (10pcs pkg)
Evergreen Scale Models 101 Opaque White Polystyrene Strip 0.010x0.030in (10pcs pkg)
Evergreen Scale Models 101 Opaque White Polystyrene Strip 0.010x0.030in (10pcs pkg)
Evergreen Scale Models 100 Opaque White Polystyrene Strips 14in .010x.020 (10pcs pkg)
Evergreen Opaque White Polystyrene Strips 14in .010x.020 (10pcs pkg)
Athearn 18429 HO Scale - RTR 50 Ft NACC Box - DM&E #5536
RTR 50 Ft NACC Box - DM&E #5536
Athearn 18428 HO Scale - RTR 50 Ft NACC Box - DM&E #5534
RTR 50 Ft NACC Box - DM&E #5534
Athearn Genesis G67146 - LED Replacement - No Lens/Deck Mount Ditch Light (12)
LED Replacement - No Lens/Deck Mount Ditch Light (12)
Athearn Genesis G67145 - LED Bulb - Long/Standard Length 6.35mm (12)
LED Bulb - Long/Standard Length 6.35mm (12)
Athearn Genesis G67143 - LED Bulb - Standard Length 3.00mm (12)
LED Bulb - Standard Length 3.00mm (12)
Atlas 20005672 - HO Gunderson Multi-Max Auto Rack - Kansas City Southern #696070
Gunderson Multi-Max Auto Rack - Kansas City Southern #696070
Atlas 20005670 - HO Gunderson Multi-Max Auto Rack - Kansas City Southern #696033
Gunderson Multi-Max Auto Rack - Kansas City Southern #696033
Atlas 20005669 - HO Gunderson Multi-Max Auto Rack - Kansas City Southern #696018
Gunderson Multi-Max Auto Rack - Kansas City Southern #696018
Iconic Replica 87-0177 - 1:87 Van Hool CX45 MotorCoach: New Facade - ABC Van Hool (Gray)
Van Hool CX45 MotorCoach: New Facade - ABC Van Hool (Gray)
Bowser 42375 - HO RTR 100 Ton 3-Bay Open Hopper - D&H ex Reading #9708
100 Ton 3-Bay Open Hopper - D&H ex Reading #9708
Evergreen 85 - Canopy Glue - 2oz (59.1mL)
Canopy Glue - 2oz (59.1mL)
Atlas 175 - HO Code 100 Custom-Line(R) Crossing - 60-Degree
HO Code 100 Custom-Line(R) Crossing - 60-Degree
AK Interactive 4063 - Brown Earth Deposits
Brown Earth Deposits
AK Interactive 4062 - Light Dust Deposits
Light Dust Deposits
AK Interactive 4113 - Dark Rust Deposits
Dark Rust Deposits
AK Interactive 4112 - Medium Rust Deposits
Medium Rust Deposits
AK Interactive 4111 - Light Rust Deposits
Light Rust Deposits
AK Interactive 4120 - Burnt Vehicles Weathering Set
Burnt Vehicles Weathering Set
Rapido 133009-2 - HO ACF PD3500 Flexi Flo Hopper - PC/Conrail Scale Test Car Version 3(996H) -inservice 1969 No. CR 80027
PC/Conrail Scale Test Car Version 3(996H) -inservice 1969 No. CR 80027
Rapido 133010-6 - HO ACF PD3500 Flexi Flo Hopper - Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990 No. 897885
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990 No. 897885
Rapido 133010-5 - HO ACF PD3500 Flexi Flo Hopper - Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990 No. 897878
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990 No. 897878
Rapido 133010-4 - HO ACF PD3500 Flexi Flo Hopper - Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990 No. 897868
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990 No. 897868
Rapido 133010-3 - HO ACF PD3500 Flexi Flo Hopper - Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990 No. 897857
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990 No. 897857
Rapido 133010-2 - HO ACF PD3500 Flexi Flo Hopper - Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990 No. 897851
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990 No. 897851
Rapido 133010-1 - HO ACF PD3500 Flexi Flo Hopper - Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990 No. 897833
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990 No. 897833
Rapido 133008-6 - HO ACF PD3500 Flexi Flo Hopper - Conrail CR Version 3(996H) Conrail Repaint-inservice 1976 No. 897794
Conrail CR Version 3(996H) Conrail Repaint-inservice 1976 No. 897794
Rapido 133008-3 - HO ACF PD3500 Flexi Flo Hopper - Conrail CR Version 3(996H) Conrail Repaint-inservice 1976 No. 897712
Conrail CR Version 3(996H) Conrail Repaint-inservice 1976 No. 897712
Rapido 133008-2 - HO ACF PD3500 Flexi Flo Hopper - Conrail CR Version 3(996H) Conrail Repaint-inservice 1976 No. 897690
Conrail CR Version 3(996H) Conrail Repaint-inservice 1976 No. 897690
Rapido 133008-1 - HO ACF PD3500 Flexi Flo Hopper - Conrail CR Version 3(996H) Conrail Repaint-inservice 1976 No. 897684
Conrail CR Version 3(996H) Conrail Repaint-inservice 1976 No. 897684
Rapido 133003-6 - HO ACF PD3500 Flexi Flo Hopper - NYC As Delivered (963H) - In Service 1965 No,885893
NYC As Delivered (963H) - In Service 1965
Rapido 133003-4 - HO ACF PD3500 Flexi Flo Hopper - NYC As Delivered (963H) - In Service 1965 No.885873
NYC As Delivered (963H) - In Service 1965
Rapido 133003-3 - HO ACF PD3500 Flexi Flo Hopper - NYC As Delivered (963H) - In Service 1965 No.885836
NYC As Delivered (963H) - In Service 1965
Rapido 133003-1 - HO ACF PD3500 Flexi Flo Hopper - NYC As Delivered (963H) - In Service 1965 No.885827
NYC As Delivered (963H) - In Service 1965
Plastruct 91365 Tinted Mirrored Sheet - Brass/Gold (2pcs pkg)
Plastruct 91365 Tinted Mirrored Sheet - Brass/Gold (2pcs pkg)
Plastruct 91364 Tinted Mirrored Sheet - Smoke (2pcs pkg)
Plastruct 91364 Tinted Mirrored Sheet - Smoke (2pcs pkg)
Plastruct 91363 Tinited Mirrored Sheet - Deep Gold (2 pcs pkg)
Plastruct 91363 Tinited Mirrored Sheet - Deep Gold (2 pcs pkg)
Plastruct 91361 Tinted Mirrored Sheet - Bronze (2pcs pkg)
Plastruct 91361 Tinted Mirrored Sheet - Bronze (2pcs pkg)
Plastruct 91360 Tinted Mirrored Sheer- Silver (2pcs pkg)
Plastruct 91360 Tinted Mirrored Sheer- Silver (2pcs pkg)
Plastruct 91253 Clear Plastic Sheet .060 (2pcs pkg)
Plastruct 91253 Clear Plastic Sheet .060 (2pcs pkg)
Plastruct 91252 Clear Plastic Sheet .030 (2pcs pkg)
Plastruct 91252 Clear Plastic Sheet .030 (2pcs pkg)
Plastruct 91251 Clear Plastic Sheet .030 (3pcs pkg)
Plastruct 91251 Clear Plastic Sheet .030 (3pcs pkg)
Plastruct 91301 Flouresecent Styrene Sheet Blue (2pcs pkg)
Plastruct 91301 Flouresecent Styrene Sheet Blue (2pcs pkg)
Plastruct 91008 Grey ABS Sheet .125 (2pcs pkg)
Plastruct 91008 Grey ABS Sheet .125 (2pcs pkg)
Plastruct 91005 Gray ABS 0.060 (2pcs pkg)
Plastruct 91005 Gray ABS 0.060 (2pcs pkg)
Plastruct 91007 Grey ABS Sheets .100 (2pcs pkg)
Plastruct 91007 Grey ABS Sheets .100 (2pcs pkg)
Plastruct 90450 1:16 ABS Stairway
Plastruct 90450 1:16 ABS Stairway
Plastruct 90449 1:16 ABS Grey Stairway
Plastruct 90449 1:16 ABS Grey Stairway
Plastruct 90448 1:24 ABS Grey Stairway G scale
Plastruct 90448 1:24 ABS Grey Stairway G scale
Plastruct 91887 Brick Paper Sheet (2pcs pkg)
Plastruct 91887 Brick Paper Sheet (2pcs pkg)
Plastruct 91883 Red Brick Patterned Plastic Sheet (2pcs pkg)
Plastruct 91883 Red Brick Patterned Plastic Sheet (2pcs pkg)
Plastruct 91881 Brown Brick Paper Sheet (2pcs pkg)
Plastruct 91881 Brown Brick Paper Sheet (2pcs pkg)
Plastruct 91875 Random Grey Stone Paper Pattern Sheet (2pcs pkg)
Plastruct 91875 Random Grey Stone Paper Pattern Sheet (2pcs pkg)
Plastruct 91874 White Rose Marble Paper Sheet (2pcs pkg)
Plastruct 91874 White Rose Marble Paper Sheet (2pcs pkg)
Plastruct 91873 White Black Marble Paper Sheet (2pcs pkg)
Plastruct 91873 White Black Marble Paper Sheet (2pcs pkg)
Plastruct 91862 Blue Snowflake Square Tile Paper Sheet (2pcs pkg)
Plastruct 91862 Blue Snowflake Square Tile Paper Sheet (2pcs pkg)
Plastruct 91861 Brown Tile Paper Sheet (2pcs pkg)
Plastruct 91861 Brown Tile Paper Sheet (2pcs pkg)
Plastruct 91857 Light Hardwood Floor Paper Pattern Sheet (2pcs pkg)
Plastruct 91857 Light Hardwood Floor Paper Pattern Sheet (2pcs pkg)
Plastruct 91856 Reddish Brown Hardwood Floor Paper (2pcs pkg)
Plastruct 91856 Reddish Brown Hardwood Floor Paper (2pcs pkg)
Plastruct Walnut Wood Paper Sheet (2pcs pkg)
Plastruct Walnut Wood Paper Sheet (2pcs pkg)
Plastruct 91854 Wood Paper Sheet Mahogany (2pcs pkg)
Plastruct 91854 Wood Paper Sheet Mahogany (2pcs pkg)
Plastruct 91853 Wood Paper Sheet (2pcs pkg)
Plastruct 91853 Wood Paper Sheet (2pcs pkg)
Rapido 133002-6 - HO ACF PD3500 Flexi Flo Hopper - NYC As Delivered (941H) - In Service 1964 #885823
NYC As Delivered (941H) - In Service 1964 #885823
Plastruct 91852 Oak Wood Sheet (2pcs pkg)
Plastruct 91852 Oak Wood Sheet (2pcs pkg)
Rapido 133002-3 - HO ACF PD3500 Flexi Flo Hopper - NYC As Delivered (941H) - In Service 1964 #885809
NYC As Delivered (941H) - In Service 1964 #885809
Plastruct 91851 Maple Paneling Sheet (2pcs pkg)
Plastruct 91851 Maple Paneling Sheet (2pcs pkg)
Rapido 133002-2 - HO ACF PD3500 Flexi Flo Hopper - NYC As Delivered (941H) - In Service 1964 #885804
NYC As Delivered (941H) - In Service 1964 #885804
Plastruct 91004 ABS Sheet .040 (3pcs pkg)
Plastruct 91004 ABS Sheet .040 (3pcs pkg)
Plastruct 91003 ABS Sheet .030 (4pcs pkg)
Plastruct 91003 ABS Sheet .030 (4pcs pkg)
Plastruct 91002 ABS Sheet 0.02 (5pcs pkg)
Plastruct 91002 ABS Sheet 0.02 (5pcs pkg)
Plastruct 91001 ABS .010 Grey Sheet (5pcs pkg)
Plastruct 91001 ABS .010 Grey Sheet (5pcs pkg)
Plastruct 90223 ABS 3/8 Rectangle Tube (5pcs pkg)
Plastruct 90223 ABS 3/8 Rectangle Tube (5pcs pkg)
Plastruct 90222 ABS 5/16 Rectangle Tube (5pcs pkg)
Plastruct 90222 ABS 5/16 Rectangle Tube (5pcs pkg)
Plastruct 90221 ABS 1/4 rectangle Tube (6pcs pkg)
Plastruct 90221 ABS 1/4 rectangle Tube (6pcs pkg)
Plastruct 90205 ABS 3/8 Square Tube (4pcs pkg)
Plastruct 90205 ABS 3/8 Square Tube (4pcs pkg)
Plastruct 90204 ABS 5/16 Square Tube (4pcs pkg)
Plastruct 90204 ABS 5/16 Square Tube (4pcs pkg)
Plastruct 90203 ABS 1/4 Square Tube (5pcs pkg)
Plastruct 90203 ABS 1/4 Square Tube (5pcs pkg)
Plastruct 90202 ABS 3/16 Square Tube (6pcs pkg)
Plastruct 90202 ABS 3/16 Square Tube (6pcs pkg)
Plastruct 90201 ABS 1/8 Square Tube (7pcs pkg)
Plastruct 90201 ABS 1/8 Square Tube (7pcs pkg)
Plastruct 90366 ABS 1-1.25inch Strip Stock Dark Grey (4pcs pkg)
Plastruct 90366 ABS 1-1.25inch Strip Stock Dark Grey (4pcs pkg)
Plastruct 90365 ABS 1.25 x 24 Plastic Strip Stock (5pcs pkg)
Plastruct 90365 ABS 1.25 x 24 Plastic Strip Stock (5pcs pkg)
Plastruct 90362 ABS 1-1.25 in Strip Stock Light Grey (4pcs pkg)
Plastruct 90362 ABS 1-1.25 in Strip Stock Light Grey (4pcs pkg)
Plastruct 90361 1in ABS Strip (5pcs pkg)
Plastruct 90361 1in ABS Strip (5pcs pkg)
Plastruct 90108 OD 3/8 Butyrate Tubing (5pcs pkg)
Plastruct 90108 OD 3/8 Butyrate Tubing (5pcs pkg)
Plastruct 90107 OD 5/16 Butyrate Tubing (6pcs pkg)
Plastruct 90107 OD 5/16 Butyrate Tubing (6pcs pkg)
Plastruct 90106 OD 1/4 Butyrate Tubing (7pcs pkg)
Plastruct 90106 OD 1/4 Butyrate Tubing (7pcs pkg)
Plastruct 90105 OD 3/16 Butyrate Tubing (9pcs pkg)
Plastruct 90105 OD 3/16 Butyrate Tubing (9pcs pkg)
Plastruct 90104 OD 1/8 Butyrate Tubing (10pcs pkg)
Plastruct 90104 OD 1/8 Butyrate Tubing (10pcs pkg)
Plastruct 90103 OD 3/32 Butyrate Tubing (10pcs pkg)
Plastruct 90103 OD 3/32 Butyrate Tubing (10pcs pkg)
Plastruct 90102 O D 1/16 Butrate Coated Wire (12pcs pkg)
Plastruct 90102 O D 1/16 Butrate Coated Wire (12pcs pkg)
Plastruct 90101 O D Butyrate Coated Wire (15 pcs pkg)
Plastruct 90101 O D Butyrate Coated Wire (15 pcs pkg)
Plastruct 90408 ABS 1in Warren Open Web Truss (2pcs pkg)
Plastruct 90408 ABS 1in Warren Open Web Truss (2pcs pkg)
Plastruct 90407 ABS 3/4 Warren Open Web Truss (2pcs pkg)
Plastruct 90407 ABS 3/4 Warren Open Web Truss (2pcs pkg)
Plastruct 90406 ABS 5/8 Warren Open Web Truss (2pcs pkg)
Plastruct 90406 ABS 5/8 Warren Open Web Truss (2pcs pkg)
Plastruct 90405 ABS 1/2 Warren Open Web Truss (2 pcs pkg)
Plastruct 90405 ABS 1/2 Warren Open Web Truss (2 pcs pkg)
Plastruct 90401 ABS 1/8 Warren Open Web Truss (2pcs pkg)
Plastruct 90401 ABS 1/8 Warren Open Web Truss (2pcs pkg)
Plastruct 90482 HO ABS Stair Rail (2pcs pkg)
Plastruct 90482 HO ABS Stair Rail (2pcs pkg)
Rapido 133001-1 - HO ACF PD3500 Flexi Flo Hopper - FMC Chemicals SHPX (996H) - In Service 1966 #76002
FMC Chemicals SHPX (996H) - In Service 1966 #76002
Plastruct 90481 N ABS Stair Rail (2pcs pkg)
Plastruct 90481 N ABS Stair Rail (2pcs pkg)
Plastruct 90471 N ABS Hand Rail (2pcs pkg)
Plastruct 90471 N ABS Hand Rail (2pcs pkg)
Plastruct 90442 HO ABS 2 in Stair (2pcs pkg)
Plastruct 90442 HO ABS 2 in Stair (2pcs pkg)
Plastruct 90441 N scale ABS 2 in Stair (2pcs pkg)
Plastruct 90441 N scale ABS 2 in Stair (2pcs pkg)
Plastruct 90284 - 5/32In Fluorescent Yellow Rod (5pcs)
5/32In Fluorescent Yellow Rod (5pcs)
Plastruct 90283 - 1/8In Fluorescent Yellow Rod (7pcs)
1/8In Fluorescent Yellow Rod (7pcs)
Plastruct 90282 - 3/32In Fluorescent Yellow Rod (8pcs)
3/32In Fluorescent Yellow Rod (8pcs)
Plastruct 90281 - 1/16In Fluorescent Yellow Rod (10pcs)
1/16In Fluorescent Yellow Rod (10pcs)
Plastruct 90274 - 5/32In Fluorescent Red Rod (5pcs)
5/32In Fluorescent Red Rod (5pcs)
Plastruct 90273 - 1/8In Fluorescent Red Rod (7pcs)
1/8In Fluorescent Red Rod (7pcs)
Plastruct 90272 - 3/32In Fluorescent Red Rod (8pcs)
3/32In Fluorescent Red Rod (8pcs)
Plastruct 90271 - 1/16In Fluorescent Red Rod (10pcs)
1/16In Fluorescent Red Rod (10pcs)
Plastruct 90264 - 5/32In Fluorescent Green Rod (5pcs)
5/32In Fluorescent Green Rod (5pcs)
Plastruct 90263 - 1/8In Fluorescent Green Rod (7pcs)
1/8In Fluorescent Green Rod (7pcs)
Plastruct 90262 - 3/32In Fluorescent Green Rod (8pcs)
3/32In Fluorescent Blue Rod (8pcs)
Plastruct 90261 - 1/16In Fluorescent Green Rod (10pcs)
1/16In Fluorescent Green Rod (10pcs)
Plastruct 90254 - 5/32In Fluorescent Blue Rod (5pcs)
5/32In Fluorescent Blue Rod (5pcs)
Plastruct 90253 - 1/8In Fluorescent Blue Rod (7pcs)
1/8In Fluorescent Blue Rod (7pcs)
Plastruct 90252 - 3/32In Fluorescent Blue Rod (8pcs)
3/32In Fluorescent Blue Rod (8pcs)
Plastruct 90251 - 1/16In Fluorescent Blue Rod (10pcs)
1/16In Fluorescent Blue Rod (10pcs)
Plastruct 90294 - 1/4In Acrylic Round Rod (10pcs)
1/4In Acrylic Round Rod (10pcs)
Plastruct 90293 - 3/16In Acrylic Round Rod (20pcs)
3/16In Acrylic Round Rod (20pcs)
Plastruct 90292 - 1/8In Acrylic Round Rod (30pcs)
1/8In Acrylic Round Rod (30pcs)
Plastruct 90291 - 1/16In Acrylic Round Rod (40pcs)
1/16In Acrylic Round Rod (40pcs)
Plastruct 90946 - G (1:24) Custom Spiral Staircase (1pc)
G (1:24) Custom Spiral Staircase (1pc)
Plastruct 90944 - G (1:24) Custom Right Turn Staircase (1pc)
G (1:24) Custom Right Turn Staircase (1pc)
Plastruct 90942 - G (1:24) Custom Left Turn Staircase (1pc)
G (1:24) Custom Left Turn Staircase (1pc)
Plastruct 90940 - G (1:24) Custom Straight Staircase (1pc)
G (1:24) Custom Straight Staircase (1pc)
Plastruct 90947 - O (1:48) Custom Spiral Staircase (1pc)
O (1:48) Custom Spiral Staircase (1pc)
Plastruct 90945 - O (1:48) Custom Right Turn Staircase (1pc)
O (1:48) Custom Right Turn Staircase (1pc)
Plastruct 90943 - O (1:48) Custom Left Turn Staircase (1pc)
O (1:48) Custom Left Turn Staircase (1pc)
Plastruct 90941 - O (1:48) Custom Straight Staircase (1pc)
O (1:48) Custom Straight Staircase (1pc)
Plastruct 90426 - 1:16 ABS LADDER (2pcs)
1:16 ABS LADDER (2pcs)
Plastruct 90425 - G (1:24) ABS LADDER (2pcs)
G (1:24) ABS LADDER (2pcs)
Plastruct 90424 - 1:32 ABS LADDER (2pcs)
1:32 ABS LADDER (2pcs)
Plastruct 90423 - O (1:48) ABS LADDER (2pcs)
O (1:48) ABS LADDER (2pcs)
Plastruct 90434 - G (1:24) Ladder with Safety Cage (1pc)
G (1:24) Ladder with Safety Cage (1pc)
Plastruct 90433 - 1:32 Ladder with Safety Cage (1pc)
1:32 Ladder with Safety Cage (1pc)
Plastruct 90432 - O (1:48) Ladder with Safety Cage (1pc)
HO Ladder with Safety Cage (1pc)
Plastruct 90447 - G (1:24) ABS 2Ft-6In STAIR (1pc)
G (1:24) ABS 2Ft-6In STAIR (1pc)
Plastruct 90445 - #1 (1:32) ABS 2Ft-6In STAIR (1pc)
#1 (1:32) ABS 2Ft-6In STAIR (1pc)
Plastruct 90444 - O (1:48) ABS 3Ft-0In STAIR (1pc)
O (1:48) ABS 3Ft-0In STAIR (1pc)
Plastruct 90443 - O (1:48) ABS 2Ft-6In STAIR (1pc)
O (1:48) ABS 2Ft-6In STAIR (1pc)
Plastruct 90476 - 1:16 ABS Hand Rail (1pc)
1:16 ABS Hand Rail (1pc)
Plastruct 90475 - G (1:24) ABS Hand Rail (1pc)
G (1:24) ABS Hand Rail (1pc)
Plastruct 90474 - 1:32 ABS Hand Rail (1pc)
1:32 ABS Hand Rail (1pc)
Plastruct 90486 - 1:16 ABS Stair Rail (1pc)
1:16 ABS Stair Rail (1pc)
Plastruct 90485 - G (1:24) ABS Stair Rail (1pc)
G (1:24) ABS Stair Rail (1pc)
Plastruct 90484 - #1 (1:32) ABS Stair Rail (1pc)
#1 (1:32) ABS Stair Rail (1pc)
Plastruct 90483 - O (1:48) ABS Stair Rail (1Pc)
O (1:48) ABS Stair Rail (1Pc)
Plastruct 90122 Brass Insert Wire .058 (10pcs pkg)
Plastruct 90122 Brass Insert Wire .058 (10pcs pkg)
Plastruct 90121 Brass Insert Wire .045 (10pcs pkg)
Plastruct 90121 Brass Insert Wire .045 (10pcs pkg)
Plastruct 90174 Butyrate Half Round Profile 3/8 (3 pcs pkg)
Plastruct 90174 Butyrate Half Round Profile 3/8 (3 pcs pkg)
Plastruct 90173 Butyrate Half Round Profile 5/16 (4pcs pkg)
Plastruct 90173 Butyrate Half Round Profile 5/16 (4pcs pkg)
Plastruct 90172 Butyrate Half Round Profile 1/4 (4pcs pkg)
Plastruct 90172 Butyrate Half Round Profile 1/4 (4pcs pkg)
Plastruct Butyrate Half Round Profile 3/16 (4pcs pkg)
Plastruct Butyrate Half Round Profile 3/16 (4pcs pkg)
Plastruct 90352 ABS Rod 1/4 (5pcs pkg)
Plastruct 90352 ABS Rod 1/4 (5pcs pkg)
Plastruct 90351 ABS ROD 1/8 (5 pcs pkg)
Plastruct 90351 ABS ROD 1/8 (5 pcs pkg)
Plastruct 90086 ABS TEE 1/4 (4pcs pkg)
Plastruct 90086 ABS TEE 1/4 (4pcs pkg)
Plastruct 90085 ABS TEE 3/16 (5 pcs pkg)
Plastruct 90085 ABS TEE 3/16 (5 pcs pkg)
Plastruct 90084 ABS TEE 1/8 (7pcs pkg)
Plastruct 90084 ABS TEE 1/8 (7pcs pkg)
Plastruct 90083 ABS TEE 3/32 (8pcs pkg)
Plastruct 90083 ABS TEE 3/32 (8pcs pkg)
Plastruct 90082 ABS TEE 1/16 (8pcs pkg)
Plastruct 90082 ABS TEE 1/16 (8pcs pkg)
Plastruct 90081 ABS TEE 3/64 (10 pcs pkg)
Plastruct 90081 ABS TEE 3/64 (10 pcs pkg)
Plastruct 90067 ABS H Column 3/8 (4pcs pkg)
Plastruct 90067 ABS H Column 3/8 (4pcs pkg)
Plastruct 90066 ABS H Column 5/16 (5pcs pkg)
Plastruct 90066 ABS H Column 5/16 (5pcs pkg)
LOCOMOTIVE FEATURES:
No.4699
Ex-EMD Lease unit. White cab roof
CSX-style GPS Dome
Large EMD plow
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
LOCOMOTIVE FEATURES:
No.4696
Ex-EMD Lease unit. White cab roof
CSX-style GPS Dome
Large EMD plow
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
LOCOMOTIVE FEATURES:
No.4689
Ex-EMD Lease unit. Blue cab roof
CSX-style GPS Dome
Large EMD plow
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
-Factory installed Celcon handrails
-Individually applied wire formed grab irons
-5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
-See-through cab windows
-DCC Ready 21-pin NEM plug
-LED Illuminated front and rear headlights
-Nickel plated, blackened machined wheels
-Wheels with RP25 contours operate on all popular brand of track
-Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMD’s most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
-Factory installed Celcon handrails
-Individually applied wire formed grab irons
-5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
-See-through cab windows
-DCC Ready 21-pin NEM plug
-LED Illuminated front and rear headlights
-Nickel plated, blackened machined wheels
-Wheels with RP25 contours operate on all popular brand of track
-Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMD’s most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
-Factory installed Celcon handrails
-Individually applied wire formed grab irons
-5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
-See-through cab windows
-DCC Ready 21-pin NEM plug
-LED Illuminated front and rear headlights
-Nickel plated, blackened machined wheels
-Wheels with RP25 contours operate on all popular brand of track
-Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMD’s most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
-Factory installed Celcon handrails
-Individually applied wire formed grab irons
-5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
-See-through cab windows
-DCC Ready 21-pin NEM plug
-LED Illuminated front and rear headlights
-Nickel plated, blackened machined wheels
-Wheels with RP25 contours operate on all popular brand of track
-Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMD’s most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
-Factory installed Celcon handrails
-Individually applied wire formed grab irons
-5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
-See-through cab windows
-DCC Ready 21-pin NEM plug
-LED Illuminated front and rear headlights
-Nickel plated, blackened machined wheels
-Wheels with RP25 contours operate on all popular brand of track
-Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMD’s most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
-Factory installed Celcon handrails
-Individually applied wire formed grab irons
-5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
-See-through cab windows
-DCC Ready 21-pin NEM plug
-LED Illuminated front and rear headlights
-Nickel plated, blackened machined wheels
-Wheels with RP25 contours operate on all popular brand of track
-Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMD’s most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
Detailed Information
NEW FEATURES:
Solid pilot face with screw mounted coupler pockets on both ends
LED Headlights and Improved rear number boards
New Option - Full featured 8-function 21-pin NCE DCC Decoder
LOCOMOTIVE FEATURES:
-Factory installed Celcon handrails
-Individually applied wire formed grab irons
-5-pole motor with precision-machined flywheels and multi-link drive train for trouble free operation
-See-through cab windows
-DCC Ready 21-pin NEM plug
-LED Illuminated front and rear headlights
-Nickel plated, blackened machined wheels
-Wheels with RP25 contours operate on all popular brand of track
-Replacement parts available including motor brushes
PROTOTYPE AND BACKGROUND INFO:
The GP38-2 series of locomotives were some of EMD’s most successful designs. Produced from 1970s to mid 1980s the GP38-2 and GP50 were quickly found in many different tasks of the railroad. From switching to pulling high priority freight trains across country, these versatile locomotives could be seen all over North America. Many of these locomotives are now being rebuilt with ecologically sound emission control for higher population centers. A new era emerges as technology meets proven reliability for these EMD products.
Specifications
DCC: NCE-5240156 Equipped
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
LOCOMOTIVE FEATURES:
-Fully-assembled and ready-to-run
-DCC-ready features Quick Plugâ„¢ plug-and-play technology with 21-pin NEM connector
-Scaled from prototype resources including drawings, field measurements, photographs, and more
-Accurately painted and printed paint schemes
-Coupler cut levers
-Flexible rubber MU hoses
-Flexible rubber trainline hose
-See through cab windows
-Full cab interior
-Walkway tread
-Fine-scale Celcon handrails for scale appearance
-Windshield wipers
-Lift rings
-Wire grab irons
-Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
-Sander lines
-McHenry scale knuckle couplers - Kadee compatible
-Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
-All-wheel drive with precision gears for smooth & quiet operation
-All-wheel electrical pickup provides reliable current flow
-Wheels with RP25 contours operate on all popular brands of track
-LED lighting for realistic appearance
-Heavy die-cast frame for greater traction and more pulling power
-Packaging securely holds model for safe storage
SOUND EQUPPED MODELS ALSO FEATURE
-Onboard DCC decoder with SoundTraxx Tsunami2 sound
-Sound units operate in both DC and DCC
-Full DCC functions available when operated in DCC mode
-Engine, horn, and bell sounds work in DC
-All functions NMRA compatible in DCC mode
-Precision slow speed control
-Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
-Many functions can be altered via Configuration Value (CV) changes
-CV chart included in the box
Continuing upon the successful SD60-series, in 1992 EMD debuted the next step in locomotive evolution with the SD70-series. While outwardly similar at first glance to the SD60M, the D.C.-drive SD70M featured several external design refinements from the predecessor model. Battery boxes were relocated to the left-hand side walkway immediately behind the cab, a large, boxy forward traction motor blower housing replaced the angular version used on SD60s, the raised walkway duct on the left hand walkway was eliminated, and an intake for the rear traction motor blower on the left hand side of the carbody, directly under the rear radiator intake grill, was added.
Internally, the SD70 boasted improvements as well; a 16-710GB prime mover, rated at 4,000hp, was coupled to a new alternator design, the AR20. New D70TR traction motors were standard, and controlling all of this power and locomotive function was EMD’s new EM2000 microprocessor, which boasted more memory, twice the processing speed, and improved locomotive self-diagnostic capabilities compared to the processor suite used in the SD60. Even more revolutionary was the inclusion of EMD’s patented “Radial†truck design, the HTC-R. This design, which made its debut under EMD Demo SD60 #3, replaced the venerable HT-C truck, and is unique in its ability to shift, or “steerâ€, the wheelsets laterally through curves, resulting in greatly reduced wheelset and track wear, and coupled with the new D70TR traction motors and EM2000 microprocessor, greatly improved adhesion.
Continuing with previous practice, EMD built a set of Demonstrator SD70Ms, EMD 7000-7002, all equipped with the North American safety-cab (hence the “M†in their model designation), and decked out in an attractive gray, silver, and burgundy paint scheme. These units travelled all over North America, showing off the latest technology from EMD. Southern Pacific, Union Pacific and eventually Norfolk Southern would sign up for the SD70M models. Although NS started out with the “Spartan†cab SD70, they eventually returned for the SD70M model. By 2004 the SD70M began to be delivered with the familiar “flared†radiator grilles. Both NS and UP have examples of these locomotives on their roster, and you can still find most of the entire fleet of SD70Ms in regular service today.
The Rapido HO Scale F7B and F9B feature:
Designed from original GMD blueprints and field measurements
The only 100% accurate GMD-built F7B and F9B locomotives – This is not a stand-in
Road-number and era-specific details applied at the factory
Steam generator or no steam generator panel as appropriate
Correct bodyside grilles as appropriate
Correct end details including unique CN steam generator end louvers
Backup light in correct location for CN or CP
Unmatched underbody details including air piping
Operational backup light (DCC)
Drive system designed for silky-smooth slow-speed operation
Metal Macdonald-Cartier Knuckle Couplers
DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings
Several road numbers per paint scheme
The Rapido HO Scale F7B and F9B feature:
Designed from original GMD blueprints and field measurements
The only 100% accurate GMD-built F7B and F9B locomotives – This is not a stand-in
Road-number and era-specific details applied at the factory
Steam generator or no steam generator panel as appropriate
Correct bodyside grilles as appropriate
Correct end details including unique CN steam generator end louvers
Backup light in correct location for CN or CP
Unmatched underbody details including air piping
Operational backup light (DCC)
Drive system designed for silky-smooth slow-speed operation
Metal Macdonald-Cartier Knuckle Couplers
DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings
Several road numbers per paint scheme
The Rapido HO Scale F7B and F9B feature:
Designed from original GMD blueprints and field measurements
The only 100% accurate GMD-built F7B and F9B locomotives – This is not a stand-in
Road-number and era-specific details applied at the factory
Steam generator or no steam generator panel as appropriate
Correct bodyside grilles as appropriate
Correct end details including unique CN steam generator end louvers
Backup light in correct location for CN or CP
Unmatched underbody details including air piping
Operational backup light (DCC)
Drive system designed for silky-smooth slow-speed operation
Metal Macdonald-Cartier Knuckle Couplers
DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings
Several road numbers per paint scheme
The Rapido HO Scale F7B and F9B feature:
Designed from original GMD blueprints and field measurements
The only 100% accurate GMD-built F7B and F9B locomotives – This is not a stand-in
Road-number and era-specific details applied at the factory
Steam generator or no steam generator panel as appropriate
Correct bodyside grilles as appropriate
Correct end details including unique CN steam generator end louvers
Backup light in correct location for CN or CP
Unmatched underbody details including air piping
Operational backup light (DCC)
Drive system designed for silky-smooth slow-speed operation
Metal Macdonald-Cartier Knuckle Couplers
DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings
Several road numbers per paint scheme
The Rapido HO Scale F7B and F9B feature:
Designed from original GMD blueprints and field measurements
The only 100% accurate GMD-built F7B and F9B locomotives – This is not a stand-in
Road-number and era-specific details applied at the factory
Steam generator or no steam generator panel as appropriate
Correct bodyside grilles as appropriate
Correct end details including unique CN steam generator end louvers
Backup light in correct location for CN or CP
Unmatched underbody details including air piping
Operational backup light (DCC)
Drive system designed for silky-smooth slow-speed operation
Metal Macdonald-Cartier Knuckle Couplers
DC/Silent or DC/DCC/Sound versions featuring an ESU Loksound decoder with accurate recordings
Several road numbers per paint scheme
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Rapido 044505 HO FM H16.44, With Sound & DCC, Milwaukee Road Orange & Black Scheme No.429
Rapido has announced the Fairbanks Morse H16-44 Phase III Locomotive in HO Scale.They are offering these locomotive with road-specific details fit to make these models as accurate as possible.
Locomotive Features:
Loads of roadname-specific details, including hood doors and handrails
Accurate dimensions measured from the real thing!
Separate grab irons and handrails installed at the factory
Prototypical Trucks: Dofasco or AAR.
Both Dynamic & Non-Dynamic carbodies
Steam generators where appropriate
Full underbody piping and conduits
Different fuel tanks depending on road name
Lit number boards, headlights and green and white class lights
Rapido’s proven drive system adapted from the FA-2
DC/Silent (21-pin DCC Ready) or DC/DCC/Sound options (Manufacturer of the Sound Decoder To Be Determined)
Macdonald Cartier magnetic couplers installed at the correct height
Prototype Information:
In 1955, Fairbanks Morse offered a new design for their existing H16-44 Phase I/II model locomotives. These changes involved raising the walkway & simplifying the short & long hood to make construction easier. Exterior-wise the locomotives looked much like their bigger brother – the H24-66 but with 4 axles instead of 6. Under the hood the locomotives were nearly identical to the earlier phases of H16-44 except for replacing the Westinghouse Electrical System with a more reliable General Electric system.
A total of 165 of the H16-44 Phase III Locomotives were built between 1955 and 1963. Locomotives for the Canadian Pacific Railway & Canadian National Railway were built by Fairbanks Morse subsidiary Canadian Locomotive Company. A total of 58 H16-44s of were built at this plant. The last H16-44 was built for the Ferrorcarril de Chihuahua al Pacifico Railroad in 1963. This was the last Fairbanks Morse Locomotive to roll off the assembly line as the company folded the same year.
Soundtraxx 810159 - JST 21-PNEM Adapter
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - CSX #9998
(With larger fuel tank)
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
HO EMD F40PH Ph2 w/ditch lights - DCC Ready - AMT Montreal Transit #274
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
- DCC Ready units feature a 21 pin plug connector
HO EMD F40PH Ph2 w/ditch lights - DCC/SOund - AMT Montreal Transit #274
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - AMT Montreal Transit #271
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - Agawa Canyon #106
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - Agawa Canyon #105
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #289
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #283
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
HO EMD F40PH Ph2 w/ditch lights - DCC/Sound - DRGW Ski Train #242
Amtraks second F40PH order incorporated several changes to the original Phase 1 design. Phase 2a and 2b units (230-279, 280-328) received larger 1800-gallon fuel tanks mounted toward the front of the frame. The air reservoirs were shifted toward the rear and to the engineers side, while the battery boxes were located on the firemans side. Newer and wider Nathan K5LA horns were specified, requiring a wider horn notch on the cab roof. Units 280-328 (termed Phase 2b) had four vertical ribs at the rear of each side.
When new EPA regulations took effect in 1980, the radiator fans were replaced by quieter Q-fans creating the Phase 3 version of the F40PH. Phase 3 F40s share other spotting features with the Phase 2b F40. Many Phase 3 units were built for commuter agencies as well, but without dynamic brakes.
Amtraks F40PH units were eventually fitted with nose ditch lights. Around the same time the cab side steps and door were modified. Several F40PH units were sold to second-hand owners for use in regional and tourist services.
Rapido will offer both versions of the Phase 2b – original and ditch light-equipped with modified cab details – as well as a non-dynamic brake Phase 3 commuter unit.
Model Features:
- Extensive, separate underbody piping and conduit
- Correct body details for each variation
- Era-specific details
- Working head lights, backup light, strobe and marker lights
- Working ditch lights where appropriate
- Separate, factory-applied wire grab irons
- See-through, etched-metal radiator grills and dynamic brake grills
- Full cab interior painted in correct colors
- Scaled from original blueprints to ensure accurate dimensions
- Accurate fuel tank profile and exhaust silencer
- Sound-equipped models feature a custom ESU LokSound V5 decoder
Evergreen Scale Models 9905 - .010in Combo Transparent Polystyrene Sheet Pack (5 Sheets)
PACKAGE CONTAINS ONE SHEET EACH OF RED,BLUE,GREEN, YELLOW AND ONE SHEET OF OPAQUE BLACK, .010in (.25mm) THICK.
6in x 12in SHEET
Evergreen Scale Models 9904 - .010in Yellow Transparent Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
Evergreen Scale Models 9903 - .010in Green Transparent Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
Evergreen Scale Models 9902 - .010in Blue Transparent Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
Evergreen Scale Models 9901 - .010in Red Transparent Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
Evergreen Scale Models 9125 - .125in Plain Opaque White Polystyrene Sheet (1 Sheet)
6in x 12in SHEET
Evergreen Scale Models 9100 - .100in Plain Opaque White Polystyrene Sheet (1 Sheet)
6in x 12in SHEET
Evergreen Scale Models 9080 - .080in Plain Opaque White Polystyrene Sheet (1 Sheet)
6in x 12in SHEET
Evergreen Scale Models 9060 - .060in Plain Opaque White Polystyrene Sheet (1 Sheet)
6in x 12in SHEET
Evergreen Scale Models 9030 - .030in Plain Opaque White Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
Evergreen Scale Models 9020 - .020in Plain Opaque White Polystyrene Sheet (3 Sheets)
6in x 12in SHEET
Evergreen Scale Models 9015 - .015in Plain Opaque White Polystyrene Sheet (3 Sheets)
6in x 12in SHEET
Evergreen Scale Models 9010 - .010in Plain Opaque White Polystyrene Sheet (4 Sheets)
6in x 12in SHEET
Evergreen Scale Models 9009 - .005in Plain Opaque White Polystyrene Sheet (3 Sheets)
6in x 12in SHEET
Evergreen Scale Models 9008 - Plain Opaque White Polystyrene Three Sheet Assortment Pack
CONTAINS ONE 6inch X 12inch SHEET OF .010inch (.25mm), .020inch (.50mm), .040inch (1.0mm)
Evergreen Scale Models 9007 - .015in Clear Oriented Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
Evergreen Scale Models 9006 - .010in Clear Oriented Polystyrene Sheet (2 Sheets)
6in x 12in SHEET
Evergreen Scale Models 9005 - .005in Clear Oriented Polystyrene Sheet (3 Sheets)
6in x 12in SHEET
.125in Opaque White Polystyrene Board and Batten Siding (1 Sheet)
.040in (1.0mm) THICK X .125in (3.2mm) GROOVE SPACING (BOARD), .025in (.62mm) RIB WIDTH (BATTEN)
6in x 12in SHEET
.100in Opaque White Polystyrene Board and Batten Siding (1 Sheet)
.040in (1.0mm) THICK X .100in (2.5mm) GROOVE SPACING (BOARD), .020in (.50mm) RIB WIDTH (BATTEN)
6in x 12in SHEET
.075in Opaque White Polystyrene Board and Batten Siding (1 Sheet)
.040in (1.0mm) THICK X .075in (1.8mm) GROOVE SPACING (BOARD), .015in (.38mm) RIB WIDTH (BATTEN)
6in x 12in SHEET
.125in Opaque White Polystyrene Corrugated Siding (1 Sheet)
.040in (1.0mm) THICK X .125in (3.2mm) GROOVE SPACING, .045in (1.13mm) RIB WIDTH
6in x 12in SHEET
.080in Opaque White Polystyrene Corrugated Siding (1 Sheet)
.040in (1.0mm) THICK X .080in (2.0mm) GROOVE SPACING, .027in (.68mm) RIB WIDTH
6in x 12in SHEET
.060in Opaque White Polystyrene Corrugated Siding (1 Sheet)
.040in (1.0mm) THICK X .060in (1.5mm) GROOVE SPACING, .02in (.50mm) RIB WIDTH
6in x 12in SHEET
.040in Opaque White Polystyrene Corrugated Siding (1 Sheet)
.040in (1.0mm) THICK X .040in (1.0mm) GROOVE SPACING, .013in (.33mm) RIB WIDTH
6in x 12in SHEET
.030in Opaque White Polystyrene Corrugated Siding (1 Sheet)
.040in (1.0mm) THICK X .030in (.75mm) GROOVE SPACING, .010in (.25mm) RIB WIDTH
6in x 12in SHEET
.040in x .500in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
6in x 12in SHEET
.040in x .375in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
6in x 12in SHEET
.040in x .250in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
6in x 12in SHEET
.040in x .1875in Opaque White Polystyrene Standing Seam Roofing (1 Sheet)
6in x 12in SHEET
Styrene Sidewalk Sheet - 1/2in x 1/2in Opaque White Polystyrene Sidewalk (1 Sheet)
.026in (.65mm) GROOVE SPACING.
.040in THICK.
6in x 12in SHEET
Styrene Sidewalk Sheet - 3/8in x 3/8in Opaque White Polystyrene Sidewalk (1 Sheet)
.021in (.53mm) GROOVE SPACING.
.040in THICK.
6in x 12in SHEET
Styrene Sidewalk Sheet - 1/4in x 1/4in Opaque White Polystyrene Sidewalk (1 Sheet)
.016in (.40mm) GROOVE SPACING.
.040in THICK.
6in x 12in SHEET
Styrene Sidewalk Sheet - 3/16in x 3/16in Opaque White Polystyrene Sidewalk (1 Sheet)
.013in (.33mm) GROOVE SPACING.
.040in THICK.
6in x 12in SHEET
Evergreen Scale Models 4507 - 1/2in x 1/2in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4506 - 1/3in x 1/3in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4505 - 1/4in x 1/4in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4504 - 1/6in x 1/6in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4503 - 1/8in x 1/8in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4502 - 1/12in x 1/12in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4501 - 1/16in x 1/16in Opaque White Polystyrene Square Tile (1sheet)
Evergreen Scale Models 4250 .250in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4188 .188in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4150 .150in Opaque White Polystyrene Novelty Siding (1sheet)
Size 5/0 Synthetic Round Brush
Evergreen Scale Models 4125 .125in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4109 .109in Opaque White Polystyrene Novelty Siding (1sheet)
Evergreen Scale Models 4101 .100in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4100 .100in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4083 .083in Opaque White polystyrene Novelty Siding (1Sheet)
Evergreen Scale Models 4081 .080in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4080 .080in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4067 .067in Opaque White Polystyrene O Scale Freight Car Siding (1sheet)
Evergreen Scale Models 4062 .060in Opeque White Polystyrene Novelty Siding (1sheet)
Evergreen Scale Models 4061 .060in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4060 0.60in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4051 .050in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4050 .050in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4041 .040in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4040 .040in Opaque White Polystyrene V Groove Siding (1sheet)
Evergreen Scale Models 4037 .037in Opaque White Polystyrene HO scale Freight Car Siding (1sheet)
Evergreen Scale Models 4031 0.30in Opaque White Polystyrene Clapboard Siding (1sheet)
Evergreen Scale Models 4030 .030in Opaque White Polystyrene V Groove Siding (1 Sheet)
Evergreen Scale Models 3047 .047in Opaque White Polystyrene Passenger Car Siding (1Sheet)
Evergreen Scale Models 3035 .035in Opaque White Polystyrene Passenger Car Siding (1sheet)
Evergreen Scale Models 3025 .025in Opaque White Polystyrene Passenger Car Siding (1sheet)
Evergreen Scale Models 2125 .125in Opaque White Polystyrene V Groove Siding (1 Sheet)
.020in (.50mm)THICK X .125in( 3.2mm) GROOVE SPACING X .021in (.53mm) GROOVE WIDTH. GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
6in X 12in
Evergreen Scale Models 2100 .100in Opaque White Polystrene V Groove Siding (1 Sheet)
.020in (.50mm)THICK X .100in ( 2.5mm) GROOVE SPACING X .018in (.45mm) GROOVE WIDTH. GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
AVAILABLE IN 6inch X 12inch AND 12inch X 24inch SHEET SIZES
Evergreen Scale Models 2080 .080in Opaque White Polystyrene V Groove Siding (1Sheet)
.020in (.50mm)THICK X .080in ( 2.0mm) GROOVE SPACING X .016in (.40mm) GROOVE WIDTH. GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
6in X 12in
Evergreen Scale Models 2067 .067in Opaque White Polystyrene O Scale Freight Car Siding (1 Sheet)
.020in (.5mm)THICK X .067in ( 1.69mm) GROOVE SPACING.
GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
REPLICATES 3.25in GROOVE SPACING IN O SCALE
6in X 12in
Evergreen Scale Models 2060 .060in Opaque White Polystyrene V Groove Siding (1 Sheet)
.020in (.50mm)THICK X .060in ( 1.5mm) GROOVE SPACING X .013in (.33mm) GROOVE WIDTH. GROOVE SPACING IS CENTER TO CENTER OF GROOVES
6in X 12in
Evergreen Scale Models 2050 .050in Opaque White Polystyrene V Groove Siding (1 Sheet)
.020in (.50mm)THICK X .050in ( 1.3mm) GROOVE SPACING X .012in (.30mm) GROOVE WIDTH. GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
6in X 12in
Evergreen Scale Models 2040 .040in Opaque White Polystyrene V Groove Siding (1 sheet)
.020in (.50mm)THICK X .040in ( 1.0mm) GROOVE SPACING X .011in (.28mm) GROOVE WIDTH. GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
6in X 12in
Evergreen Scale Models 2037 .037in Opaque White Polystyrene HO Scale Freight Car Siding (1 Sheet Pack)
.020in (.5mm)THICK X .037in( .95mm) GROOVE SPACING.
GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
REPLICATES 3.25in GROOVE SPACING IN HO SCALE
AVAILABLE IN 6in X 12in AND 12in X 24in SHEET SIZES
Evergreen Scale Models 2030 .30in Opaque White Polystyrene V Groove Siding (1 Sheet pack)
.020in (.50mm)THICK X .030in( .75mm) GROOVE SPACING X ..010in (.25mm) GROOVE WIDTH. GROOVE SPACING IS CENTER TO CENTER OF GROOVES.
6in X 12in
Evergreen Scale Models 2025 - Opaque White Polystyrene V Groove Siding 0.025in(1 piece)
Evergreen Scale Models - Opaque White Polystyrene N Scale Freight Car Siding .020In x 6In x 12In (1 sheet pkg)
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .080In x 6In x 12In (1 pc pkg)
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .060In x 6In x 12In (1 pc pkg)
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .040In x 6In x 12In (2 pcs pkg)
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .030In x 6In x 12In (2 pcs pkg)
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .020In x 6In x 12In (3 pcs pkg)
Evergreen Scale Models - Plain Opaque Black Polystyrene Sheet .010In x 6In x 12In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (6x12) .066In x .135In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 6 X 12 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (6x10) .066In x .112In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 6 X 10 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (6x8) .066In x .090In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 6 X 8 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (6x6) .066In x .066In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 6 X 6 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (4x12) .043In x .135In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 4 X 12 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (4x10) .043In x .112In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 4 X 10 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (4x8) .043In x .090In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 4 X 8 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (4x6) .043In x .066In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 4 X 6 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (4x4) .043In x .043In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 4 X 4 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x12) .022In x .135In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 2 X 12 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x10) .022In x .112In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 2 X 10 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x8) .022In x .090In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 2 X 8 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x6) .022In x .066In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 2 X 6 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x4) .022In x .043In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 2 X 4 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x3) .022In x .033In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 2 X3 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (2x2) .022In x .022In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 2 X 2 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x12) .011In x .135In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 1 X 12 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x10) .011In x .112In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 1 X 10 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x8) .011In x .090In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 1 X 8 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x6) .011In x .066In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 1 X 6 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x4) .011In x .043In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 1 X 4 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x3) .011In x .033In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 1 X 3 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene HO Scale Strips (1x2) .011In x .022In x 14In (10 pcs pkg)
DIMENSIONS REPLICATE 1 X 2 LUMBER SIZE IN HO SCALE
Evergreen Scale Models - Opaque White Polystyrene T Shape .321In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .257In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .198In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .141In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .123In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .092In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .073In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .056In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene T Shape .035In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Z Channel .250In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Z Channel .188In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Z Channel .156In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Z Channel .125In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Z Channel .100In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Z Channel .080In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Z Channel .060In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Angle .250In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Angle .156In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Angle .125In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Angle .100In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Angle .080In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Angle .060In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene H-Column .188In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene H-Column .156In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene H-Column .125In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene H-Column .100In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene H-Column .080In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene H-Column .060In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .375In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .312In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .250In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .188In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .156In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .100In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .080In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene I-Beam .060In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .312In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .250In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .188In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .156In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .125In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .100In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .080In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Channel .060In x 14In (4 pcs pkg)
53Ft High Cube Container - Clarke- Transforce (2-pack 539630 and 539653)
2020 Release
Detail Variations:
All-new paint scheme
CTHU 539630
CTHU 539653
The Rapido Trains HO Scale 53ft container is a beauty way to go. The insulated dry boxes are ubiquitous to intermodal trains across Canada and the United States. While a good portion of these containers can be found on domestic trains across Canada, they are also seen throughout the US Midwest and as far south as New Orleans.
The containers will also come with an optional heater box and fuel tank, correctly decorated and installed as appropriate for each paint scheme. All containers come assembled with an easily-removable floor so that additional weight can be added as-desired by the end customer.
Available in a wide range of paint schemes including both railway-owned containers as well as those owned by various transportation and shipping companies.
53Ft High Cube Container - CP - Red (2-pack 732333 and 732382)
2020 Release
Detail Variations:
All-new numbers
CPPU 732333
CPPU 732382
The Rapido Trains HO Scale 53ft container is a beauty way to go. The insulated dry boxes are ubiquitous to intermodal trains across Canada and the United States. While a good portion of these containers can be found on domestic trains across Canada, they are also seen throughout the US Midwest and as far south as New Orleans.
The containers will also come with an optional heater box and fuel tank, correctly decorated and installed as appropriate for each paint scheme. All containers come assembled with an easily-removable floor so that additional weight can be added as-desired by the end customer.
Available in a wide range of paint schemes including both railway-owned containers as well as those owned by various transportation and shipping companies.
53Ft High Cube Container - CP - Gray(2-pack 731775 and 731788)
2020 Release
Detail Variations:
All-new numbers
CPPU 731775
CPPU 731788
The Rapido Trains HO Scale 53ft container is a beauty way to go. The insulated dry boxes are ubiquitous to intermodal trains across Canada and the United States. While a good portion of these containers can be found on domestic trains across Canada, they are also seen throughout the US Midwest and as far south as New Orleans.
The containers will also come with an optional heater box and fuel tank, correctly decorated and installed as appropriate for each paint scheme. All containers come assembled with an easily-removable floor so that additional weight can be added as-desired by the end customer.
Available in a wide range of paint schemes including both railway-owned containers as well as those owned by various transportation and shipping companies.
53Ft High Cube Container - CN Intermodal (2-pack 287785 and 287865)
2020 Release
Detail Variations:
All-new numbers
CNRU 287785
CNRU 287865
The Rapido Trains HO Scale 53ft container is a beauty way to go. The insulated dry boxes are ubiquitous to intermodal trains across Canada and the United States. While a good portion of these containers can be found on domestic trains across Canada, they are also seen throughout the US Midwest and as far south as New Orleans.
The containers will also come with an optional heater box and fuel tank, correctly decorated and installed as appropriate for each paint scheme. All containers come assembled with an easily-removable floor so that additional weight can be added as-desired by the end customer.
Available in a wide range of paint schemes including both railway-owned containers as well as those owned by various transportation and shipping companies.
Evergreen Scale Models - Opaque White Polystyrene Rectangular Tubing .250In x .375In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Rectangular Tubing .188In x .312In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Rectangular Tubing .125In x .250In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Square Tubing .375In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Square Tubing .312In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Square Tubing .250In x 14In (2 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Square Tubing .188In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Square Tubing .125In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Quarter Round .10In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Quarter Round .08In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Quarter Round .06In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Quarter Round .04In x 14In (5 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Quarter Round .03In x 14In (5 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Half Round .125In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Half Round .10In x 14In (3 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Half Round .08In x 14In (4 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Half Round .06In x 14In (5 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Half Round .04In x 14In (5 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .50In x 14In (2 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .438In x 14In (2 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .375Inx 14In (2 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .344In x 14In (2 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .312In x 14In (3 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .281In x 14In (3 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .250In x 14In (3 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .219In x 14In (3 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .188In x 14In (4 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .156In x 14In (4 pcs pkg)
Evergreen Scale Models - OD Opaque White Polystyrene Tubing .093In x 14In (6 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .062In x 14In (8 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .047In x 14In (10 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .035In x 14In (10 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .025In x 14In (10 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .02In x 14In (10 pcs pkg)
Evergreen Scale Models - Opaque White Polystyrene Rod and Tube Assortment (7 pcs pkg)
Package contains one of each of the following sizes:
#214 .125In (3.2mm) OD Rod
#219 .025In (.64mm) OD Rod
#220 .035In (.88mm) OD Rod
#222 .062In (1.6mm) OD Rod
#223 .093In (2.4mm) OD Tube
#224 .125In (3.2mm) OD Tube
#226 .188In (4.8mm) OD Tube
Evergreen Scale Models - OD White Polystyrene Rod .125In x 14In (4 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .10In x 14In (5 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .08In x 14In (6 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .04In x 14In (10 pcs pkg)
Evergreen Scale Models - OD White Polystyrene Rod .03In x 14In (10 pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .250x.250 (3pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .188x.188 (4pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .125x.156 (6pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .125x.250 (5pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .125x.188 (6pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .125x.125 (6pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.250 (6pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.188 (7pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.156 (7pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.125 (7pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .10x.10 (8pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.250 (7pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.188 (8pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.156 (8pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.125 (8pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.10 (8pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.250 (8pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .08x.08 (9pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.188 (9pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.156 (9pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.125(10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.10 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.08 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .06x.06 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.250 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.188 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.156 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.125 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.10 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.08 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.06 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .04x.04 (10pcs pkg)
NS #6807
Expected in February 2021
LOCOMOTIVE FEATURES:
Brand new model
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
EMD SD60M WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Rubber MU hoses for durability
All New Tooling
New HTC trucks feature animated spinning roller bearing caps
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
NS FEATURES:
Ex BN units
Illuminated front and rear added ditchlights alternately flash per prototype w/ effect on DCC+Sound version
Illuminated front and rear number boards
Small window nose door
Standard nose bevel
Blower housing kickplate mounted on handrail
Rear pilot spare knuckles
Louvered forward access door on left side of cab
Long, smooth dynamic brake access door
CP #6258
Expected in February 2021
LOCOMOTIVE FEATURES:
Brand new model
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
EMD SD60M WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Rubber MU hoses for durability
All New Tooling
New HTC trucks feature animated spinning roller bearing caps
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
CP FEATURES:
Illuminated front and rear number boards
Illuminated front and rear added ditchlights
Split dynamic brake acess door
Winterization hatch
Large window nose door – high or low window position based on prototype
Large sand fill hatches on the nose
Standard nose bevel
SOO style rear knuckle brackets
CP #6261
Expected in February 2021
LOCOMOTIVE FEATURES:
Brand new model
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
EMD SD60M WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Rubber MU hoses for durability
All New Tooling
New HTC trucks feature animated spinning roller bearing caps
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
CP FEATURES:
Illuminated front and rear number boards
Illuminated front and rear added ditchlights
Split dynamic brake acess door
Winterization hatch
Large window nose door – high or low window position based on prototype
Large sand fill hatches on the nose
Standard nose bevel
SOO style rear knuckle brackets
#6261:
Left side forward sub base door replaced with a smooth door - no louvers
CP #6260
Expected in February 2021
LOCOMOTIVE FEATURES:
Brand new model
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
EMD SD60M WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Rubber MU hoses for durability
All New Tooling
New HTC trucks feature animated spinning roller bearing caps
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
CP FEATURES:
Illuminated front and rear number boards
Illuminated front and rear added ditchlights
Split dynamic brake acess door
Winterization hatch
Large window nose door – high or low window position based on prototype
Large sand fill hatches on the nose
Standard nose bevel
SOO style rear knuckle brackets
#6260:
Era: 2012+
CP #6258
Expected in February 2021
LOCOMOTIVE FEATURES:
Brand new model
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
EMD SD60M WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Rubber MU hoses for durability
All New Tooling
New HTC trucks feature animated spinning roller bearing caps
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
CP FEATURES:
Illuminated front and rear number boards
Illuminated front and rear added ditchlights
Split dynamic brake acess door
Winterization hatch
Large window nose door – high or low window position based on prototype
Large sand fill hatches on the nose
Standard nose bevel
SOO style rear knuckle brackets
BNSF #9236
Expected in February 2021
LOCOMOTIVE FEATURES:
Brand new model
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
EMD SD60M WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Rubber MU hoses for durability
All New Tooling
New HTC trucks feature animated spinning roller bearing caps
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
BNSF FEATURES:
Illuminated ditchlights
Rear pilot mounted spare knuckles
Louvered forward access door on left side of cab
#9236:
Era: 2006+
Blower housing kickplate mounted on handrail
BNSF #9212
Expected in February 2021
LOCOMOTIVE FEATURES:
Brand new model
Fully-assembled and ready-to-run
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, photographs, and more
Accurately-painted and –printed paint schemes
Coupler cut levers
Rubber MU hoses
Trainline hose
See-through cab windows
Full cab interior
Walkway tread
Fine-scale Celcon handrails for scale appearance
Windshield wipers
Lift rings
Wire grab irons
Detailed fuel tank with fuel fillers, fuel gauges, & breather pipes
Sander lines
McHenry scale knuckle couplers - Kadee compatible
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds the model for safe storage
GENESIS 2.0 FEATURES:
By integrating and pioneering some of the latest model advancements in the industry, Athearn is redefining model fidelity with Genesis 2.0.
Etched, see-through walkway steps
Illuminated number boards
Illuminated ground lights
DCC+Sound models feature dual Sugarcube speakers for optimal sound quality
SOUND EQUIPPED MODELS ALSO FEATURE
Dual cube speakers
Onboard DCC+Sound models have full-feature Tsunami2 sound decoder by SoundTraxx
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
EMD SD60M WILL POSESS THE FOLLOWING FEATURES:
All lighting feature new LEDs
Rubber MU hoses for durability
All New Tooling
New HTC trucks feature animated spinning roller bearing caps
Better than brass detail
DCC+Sound models contain full-feature Tsunami2 sound decoder by SoundTraxx
DCC+Sound models will have dual cube speakers for high fidelity sound.
Genesis 2.0 model features
BNSF FEATURES:
Illuminated ditchlights
Rear pilot mounted spare knuckles
Louvered forward access door on left side of cab
#9212:
Blower housing kickplate mounted on handrail
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.250 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.188 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.156 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.125 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.10 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.08 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.06 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.04 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .03x.03 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.250 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.188 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.156 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.125 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.10 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.08 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.06 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.04 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.03 (10pcs pkg)
Evergreen Scale Models Opaque White Polystyrene Strips 14in .02x.02 (10pcs pkg)
Evergreen Scale Models 118 Opaque White Polystyrene Strips 14in .015x.250 (10pcs pkg)
Evergreen Scale Models 118 Opaque White Polystyrene Strips 14in .015x.188 (10pcs pkg)
Evergreen Scale Models 117 Opaque White Polystyrene Strips 14in .015x.156 (10pcs pkg)
Evergreen Scale Models 116 Opaque White Polystyrene Strips 14in .015x.125 (10pcs pkg)
Evergreen Scale Models 115 Opaque White Polystyrene Strips 14in .015x.100 (10pcs pkg)
Evergreen Scale Models 114 Opaque White Polystyrene Strips 14in .015x.080 (10pcs pkg)
Evergreen Scale Models 113 Opaque White Polystyrene Strips 14in .015x.060 (10pcs pkg)
Evergreen Scale Models 112 Opaque White Polystyrene Strips 14in .015x.040 (10pcs pkg)
Evergreen Scale Models 111 Opaque White Polystyrene Strips 14in .015x.030 (10pcs pkg)
Evergreen Scale Models 110 Opaque White Polystyrene Strips 14in .015x.020 (10pcs pkg)
Evergreen Scale Models 109 Opaque White Polystyrene Strips 14in .010x.250 (10pcs pkg)
Evergreen Scale Models 108 Opaque White Polystyrene Strips 14in .010x.188 (10pcs pkg)
Evergreen Scale Models 107 Opaque White Polystyrene Strips 14in .010x.156 (10pcs pkg)
Evergreen Scale Models 106 Opaque White Polystyrene Strips 14in .010x.125 (10pcs pkg)
Evergreen Scale Models 105 Opaque White Polystyrene Strips 14in .010x.100 (10pcs pkg)
Evergreen Scale Models 104 Opaque White Polystyrene Strips 14in .010x.080 (10pcs pkg)
Evergreen Scale Models 103 Opaque White Polystyrene Strips 14in .010x.060 (10pcs pkg)
Evergreen Scale Models 102 Opaque White Polystyrene Strips 0.010x0.040x14in (10pcs pkg)
Evergreen Scale Models 101 Opaque White Polystyrene Strip 0.010x0.030in (10pcs pkg)
14 inches long
Evergreen Scale Model Opaque White Polystyrene Strips 14in .010x.020 (10pcs pkg)
RTR 50 Ft NACC Box - DM&E #5536
MODEL FEATURES:
Three road numbers
Applied metal grab irons and etched end platforms
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Weighted for trouble free operation
Ready-To-Roll 70 ton trucks
Machined 33In metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Minimum radius: 18In
RTR 50 Ft NACC Box - DM&E #5534
MODEL FEATURES:
Three road numbers
Applied metal grab irons and etched end platforms
Pullman Standard or Superior plug doors
Pullman Standard or Stanray (Superior) roof (to match prototype)
Fully-assembled and ready-to-run out of the box
Accurately painted and printed
Highly detailed, injection molded body
Weighted for trouble free operation
Ready-To-Roll 70 ton trucks
Machined 33In metal wheels with RP25 contours operate on all popular brands of track
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Minimum radius: 18In
LED Replacement - No Lens/Deck Mount Ditch Light (12)
LED Bulb - Long/Standard Length 6.35mm (12)
LED Bulb - Standard Length 3.00mm (12)
Gunderson Multi-Max Auto Rack - Kansas City Southern #696070
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
Gunderson Multi-Max Auto Rack - Kansas City Southern #696033
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
Gunderson Multi-Max Auto Rack - Kansas City Southern #696018
In 2013, Greenbrier Companies introduced their new design of 89ft auto rack, the Multi-Max. The new design allows for changing configurations from a Bi-Level to a Tri-Level (and back) without adding or removing decks. The racks are fully compatible with existing 89ft auto racks. To this date, most of the racks have been built on Greenbrier Companies own specially designed 89ft flat cars. These cars are commonly seen in cuts of other similar autorack cars or a solid unit train of autorack cars. Currently, almost 10,000 cars (with racks)are running on North American rails. Atlas rendition of the HO Gunderson Multi-Max will feature multiple variations and road names and is sure to be a star on your layout.
MODEL FEATURES:
Designed in the USA
All new flat car and superstructure Tooling
Newly tooled trucks
Four body style variations to match different prototype configurations
Highly detailed side screens to maximize prototypical appearance in scale
Metal couplers
Accurate painting and lettering
Van Hool CX45 MotorCoach: New Facade - ABC Van Hool (Gray)
Diecast metal
Limited edition!
100 Ton 3-Bay Open Hopper - D&H ex Reading #9708
Designed in 1960 by the N&W as the H-11 class which is an enlarged PRR H-39 70 ton hopper. In 1964, the size was increased to 12ft 3in high, cubic feet increased to 3433 and weight capacity increased to 90-100 tons. Over 130,000 have been built.
Three distinctive characteristics highlight this class of hopper:
-roping eye with integral end buffers
-end slope sheets are at a steeper angle than the hopper sheets
-13 riveted side posts with the middle two panels wider than the rest
Other features include;
-Wine door locks
-Full height side ladder stiles
-Accurate molded details
-Free-rolling trucks with 36in metal wheels
-Magnetic knuckle couplers
Canopy Glue - 2oz (59.1mL)
-Excellent Adhesion of Plastic Materials
-Dries Flexible
-Dries Clear
-Fully Cured in 24 Hours
-Water Cleanup
-Glues plastics to:
-Painted Surfaces
-Wood
-Fiberglass
-Other Plastics (ABS, PETG, Butyrate, Vinyl, Polystyrene)
-Resealable Plastic Squeeze Bottle
HO Code 100 Custom-Line(R) Crossing - 60-Degree
3 inches (7.6cm)
Atlas HO Scale Code 100 Nickel-Silver Snap Track is widely used for sectional track layouts. Each section features nickel silver rail on black molded-plastic ties with realistic wood surface detail. Snap Track features molded centerline nail holes for easy mounting with #2540 track nails. Snap track is available in a wide variety of curve radii and straight lengths and is fully compatible with Code 100 flex track and most conventional Code 100 track systems. Snap-Track is designed for use with Atlas Snap Track turnouts and crossings and can also be used with Atlas Code 100 Custom Line turnouts. Adapter track joiners #551 are available so you can also use Code 83 track on the same layout if desired.
Brown Earth Deposits
The perfect product to recreate accumulated dust and dirt on your model. This Sand Yellow enamel product is perfectly suitable for vehicles operating in a desert environment or any light soil area. The finish is extremely authentic.
Light Dust Deposits
The perfect product to recreate accumulated dust and dirt on your model. This Sand Yellow enamel product is perfectly suitable for vehicles operating in a desert environment or any light soil area. The finish is extremely authentic.
Dark Rust Deposits
The perfect product to recreate a rust texture in a light rust color in surfaces of vehicles or accessories. Once they are dry, they have the same scale appearance as real crusted rust. The finish is extremely authentic and can be combined with other tones for more realism.
Medium Rust Deposits
The perfect product to recreate a rust texture in a light rust color in surfaces of vehicles or accessories. Once they are dry, they have the same scale appearance as real crusted rust. The finish is extremely authentic and can be combined with other tones for more realism.
Light Rust Deposits
The perfect product to recreate a rust texture in a light rust color in surfaces of vehicles or accessories. Once they are dry, they have the same scale appearance as real crusted rust. The finish is extremely authentic and can be combined with other tones for more realism.
Burnt Vehicles Weathering Set
This weathering set will allow you to faithfully recreate the appearance of burnt-out vehicles. The four included pigment colors will help you to reproduce the ashes, black stains and other effects that may be observed on fire-damaged vehicles, whilst our well-received Pigment Fixer will allow you to fix your work in an effective way.
This set contains:
_ AK039 Black.
_ AK142 White Ashes.
_ AK143 Burnt Umber.
_ AK144 Burnt Rust Red.
_ AK048 Pigment Fixer.
HO ACF PD3500 Flexi Flo Hopper -
PC/Conrail Scale Test Car Version 3(996H) -inservice 1969
Car No. CR 80027
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO ACF PD3500 Flexi Flo Hopper -
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990
Car No. 897885
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO ACF PD3500 Flexi Flo Hopper -
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990
Car No. 897878
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO ACF PD3500 Flexi Flo Hopper -
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990
Car No. 897868
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO ACF PD3500 Flexi Flo Hopper -
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990
Car No. 897857
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO ACF PD3500 Flexi Flo Hopper -
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990
Car No. 897851
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO ACF PD3500 Flexi Flo Hopper -
Merchants Despatch Trans Corp MDTX Version 2(963H) Repaint Scheme-inservice 1990
Car No. 897833
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO ACF PD3500 Flexi Flo Hopper -
Conrail CR Version 3(996H) Conrail Repaint-inservice 1976
Car No. 897794
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO ACF PD3500 Flexi Flo Hopper -
Conrail CR Version 3(996H) Conrail Repaint-inservice 1976
Car No. 897712
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO ACF PD3500 Flexi Flo Hopper -
Conrail CR Version 3(996H) Conrail Repaint-inservice 1976
Car No. 897690
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
HO ACF PD3500 Flexi Flo Hopper -
Conrail CR Version 3(996H) Conrail Repaint-inservice 1976
Car No. 897684
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
NYC As Delivered (963H) - In Service 1965
Car Number: 885893
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
NYC As Delivered (963H) - In Service 1965
Car Number: 885873
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
NYC As Delivered (963H) - In Service 1965
Car Number: 885836
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
NYC As Delivered (963H) - In Service 1965
Car Numbers: 885827
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
Plastruct 91365 Tinted Mirrored Sheet - Brass/Gold (2pcs pkg)
100x300x1mm
Plastruct 91364 Tinted Mirrored Sheet - Smoke (2pcs pkg)
100x300x1mm
Plastruct 91363 Tinited Mirrored Sheet - Deep Gold (2 pcs pkg)
100x300x1mm
Plastruct 91361 Tinted Mirrored Sheet - Bronze (2pcs pkg)
100x300x1mm
Plastruct 91360 Tinted Mirrored Sheer- Silver (2pcs pkg)
100x300x1mm
Plastruct 91253 Clear Plastic Sheet .060 (2pcs pkg)
.060 x 7 x12 inches
Plastruct 91252 Clear Plastic Sheet .030 (2pcs pkg)
0.030 x7 x12 inches
Plastruct 91251 Clear Plastic Sheet .030 (3pcs pkg)
.030x7x12 inches
Plastruct 91301 Flouresecent Styrene Sheet Blue (2pcs pkg)
0.10x7x12 inches
Plastruct 91008 Grey ABS Sheet .125 (2pcs pkg)
Specifications In Inches:
Thickness: .125
Width: 7 (175mm)
Length: 12 (300mm)
Plastruct 91005 Gray ABS 0.060 (2pcs pkg)
Specifications In Inches:
Thickness: .060 (1.5mm)
Width: 7 (175mm)
Length: 12 (300mm)
Plastruct 91007 Grey ABS Sheets .100 (2pcs pkg)
Specifications In Inches :
Thickness: .100
Width: 7 (175mm)
Length: 12 (300mm)
Plastruct 90450 1:16 ABS Stairway
(20.6x62.7x300mm)
Plastruct 90449 1:16 ABS Grey Stairway
(20.6x53.2x300mm)
Plastruct 90448 1:24 ABS Grey Stairway G scale
Plastruct 91887 Brick Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
7-1/2 x 10
Plastruct 91883 Red Brick Patterned Plastic Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
7-1/2 x 10
Plastruct 91881 Brown Brick Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
7-1/2 x 10
Plastruct 91875 Random Grey Stone Paper Pattern Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
7-1/2 x 10
Plastruct 91874 White Rose Marble Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
7-1/2 x 10
Plastruct 91873 White Black Marble Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
Plastruct 91862 Blue Snowflake Square Tile Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
Plastruct 91861 Brown Tile Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
Plastruct 91857 Light Hardwood Floor Paper Pattern Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
Plastruct 91856 Reddish Brown Hardwood Floor Paper (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
Plastruct Walnut Wood Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
Plastruct 91854 Wood Paper Sheet Mahogany (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
Plastruct 91853 Wood Paper Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
NYC As Delivered (941H) - In Service 1964 #885823
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
Plastruct 91852 Oak Wood Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
NYC As Delivered (941H) - In Service 1964 #885809
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
Plastruct 91851 Maple Paneling Sheet (2pcs pkg)
A wide variety of exterior and interior patterns in several popular scales. Printed appropriately on either glossy paper or heavy .010 (0.3mm) matte stock in an appropriate color to match the pattern. These sheets are easily applied to most surfaces using double stick tape or any other adhesive transfer mechanism. Please note, the listed scales are only suggestions, as many patterns have no definitive size.
7-1/2 x 10
NYC As Delivered (941H) - In Service 1964 #885804
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
Plastruct 91004 ABS Sheet .040 (3pcs pkg)
Specifications In Inches :
Thickness: .040 (1.0mm)
Width: 7 (175mm)
Length: 12 (300mm)
Plastruct 91003 ABS Sheet .030 (4pcs pkg)
Specifications in Inches:
Thickness: .030 (0.8mm)
Width: 7 (175mm)
Length: 12 (300mm)
Plastruct 91002 ABS Sheet 0.02 (5pcs pkg)
Specifications in Inches:
Thickness: .020 (0.5mm)
Width: 7 (175mm)
Length: 12 (300mm)
Plastruct 91001 ABS .010 Grey Sheet (5pcs pkg)
Specifications In Inches :
Thickness: .010 (0.3 mm)
Width: 7 (175mm)
Length: 12 (300mm)
Plastruct 90223 ABS 3/8 Rectangle Tube (5pcs pkg)
Specifications In Inches :
Height: 3/8 (9.5mm)
Width: 1/4 (6.4mm)
Wall: 1/16 (1.6mm)
Plastruct 90222 ABS 5/16 Rectangle Tube (5pcs pkg)
Specifications In inches :
Height: 5/16 (7.9mm)
Width: 1/4 (6.4mm)
Wall: 1/16 (1.6mm)
Length: 15
Plastruct 90221 ABS 1/4 rectangle Tube (6pcs pkg)
Specifications In Inches :
Height: 1/4 (6.4mm)
Width: 3/16 (4.8mm)
Wall: 1/16 (1.6mm)
Length: 15
Plastruct 90205 ABS 3/8 Square Tube (4pcs pkg)
Specifications in Inches
Height: 3/8 (9.5 mm)
Width 3/8 (9.5 mm)
Inner Diameter 1/4 (6.4mm)
Length 15
Plastruct 90204 ABS 5/16 Square Tube (4pcs pkg)
Specifications in Inches:
Height: 5/16 (7.9mm)
Width: 5/16 (7.9mm)
Inner Diameter: 3/16 (4.8mm)
Wall: 1/16 (1.6 mm)
Length: 15
Plastruct 90203 ABS 1/4 Square Tube (5pcs pkg)
Specifications :
Height: 1/4 (6.4mm)
Width: 1/4 (6.4mm)
Inner Diameter: 1/8 (3.2mm)
Wall: 1/16 (1.6mm)
Length: 15
Plastruct 90202 ABS 3/16 Square Tube (6pcs pkg)
Height: 3/16 (4.8mm)
Width: 3/16 (4.8mm)
Inner Diameter: 3/32 (2.4mm)
Wall: 3/64 (1.2mm)
Length: 15
Plastruct 90201 ABS 1/8 Square Tube (7pcs pkg)
Specifications :
Height: 1/8 (3.2mm)
Width: 1/8(3.2mm)
Inner Diameter: .050 (1.3mm)
Wall: .037 (0.9mm)
Length: 15
Plastruct 90366 ABS 1-1.25inch Strip Stock Dark Grey (4pcs pkg)
Plastruct 90365 ABS 1.25 x 24 Plastic Strip Stock (5pcs pkg)
Plastruct 90362 ABS 1-1.25 in Strip Stock Light Grey (4pcs pkg)
Specifications :
Width: Inches 1-1/4 (31.8mm)
Thickness: Inches .030 (0.8mm)
Plastruct Product Number: 90362
Plastruct 90361 1in ABS Strip (5pcs pkg)
Plastruct 90108 OD 3/8 Butyrate Tubing (5pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
WHITE
OUTSIDE DIAMETER (O.D.)
3/8
9.5mm
INSIDE DIAMETER (I.D.)
1/4
6.4mm
THICKNESS IN INCHES
1/16
THICKNESSS IN MM
1.6mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL BUTYRATE ROUND TUBING Use for piping in industrial, residential, commercial and many other model settings. May also be used as round pylons in bridge, pier and other structures
Plastruct 90107 OD 5/16 Butyrate Tubing (6pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
WHITE
OUTSIDE DIAMETER (O.D.)
5/16
7.9mm
INSIDE DIAMETER (I.D.)
3/16
4.8mm
THICKNESS IN INCHES
1/16
THICKNESSS IN MM
1.6mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL BUTYRATE ROUND TUBING Use for piping in industrial, residential, commercial and many other model settings. May also be used as round pylons in bridge, pier and other structures.
Plastruct 90106 OD 1/4 Butyrate Tubing (7pcs pkg)
Plastruct 90105 OD 3/16 Butyrate Tubing (9pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
WHITE
OUTSIDE DIAMETER (O.D.)
3/16
4.8mm
INSIDE DIAMETER (I.D.)
3/32″
2.4mm
THICKNESS IN INCHES
3/64
THICKNESSS IN MM
1.2mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL BUTYRATE ROUND TUBING Use for piping in industrial, residential, commercial and many other model settings. May also be used as round pylons in bridge, pier and other structures.
Plastruct 90104 OD 1/8 Butyrate Tubing (10pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
WHITE
OUTSIDE DIAMETER (O.D.)
1/8
3.2mm
INSIDE DIAMETER (I.D.)
1/16
1.6mm
THICKNESS IN INCHES
1/32
THICKNESSS IN MM
0.8mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL BUTYRATE ROUND TUBING Use for piping in industrial, residential, commercial and many other model settings. May also be used as round pylons in bridge, pier and other structures.
Plastruct 90103 OD 3/32 Butyrate Tubing (10pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
WHITE
OUTSIDE DIAMETER (O.D.)
3/32
2.4mm
INSIDE DIAMETER (I.D.)
.050
1.3mm
THICKNESS IN INCHES
.020
THICKNESSS IN MM
0.5mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL BUTYRATE ROUND TUBING Use for piping in industrial, residential, commercial and many other model settings. May also be used as round pylons in bridge, pier and other structures.
Plastruct 90102 O D 1/16 Butrate Coated Wire (12pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
WHITE
OUTSIDE DIAMETER (O.D.)
1/16
1.6mm
INSIDE DIAMETER (I.D.)
N/A (wire inside)
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
BUTYRATE COATED WIRE Use for piping industrial, residential, commercial and many other model settings. May also be used as round pylons in bridge, pier and other structures.
Plastruct 90101 O D Butyrate Coated Wire (15 pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
WHITE
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
BUTYRATE COATED WIRE Use for piping industrial, residential, commercial and many other model settings. May also be used as round pylons in bridge, pier and other structures. Ideal for all facets of mo
QUANTITY
Pack of 15
OUTSIDE DIAMETER (O.D.)
3/64
1.2mm
INSIDE DIAMETER (I.D.)
N/A (wire inside)
Plastruct 90408 ABS 1in Warren Open Web Truss (2pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1
HEIGHT IN MM
25.4mm
WIDTH IN INCHES
1-27/32
WIDTH IN MM
46.8mm
THICKNESS IN INCHES
5/16
THICKNESSS IN MM
7.9mm
LENGTH IN INCHES
12
LENGTH IN MM
300mm
USE DESCRIPTION
ABS OPEN WEB TRUSS – WARREN STYLE 2 Use for roof trusses, bridges, conveyors, space frames and other steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or pro
Plastruct 90407 ABS 3/4 Warren Open Web Truss (2pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/4
HEIGHT IN MM
19.1mm
WIDTH IN INCHES
1-21/64
WIDTH IN MM
33.7mm
THICKNESS IN INCHES
1/4
THICKNESSS IN MM
6.4mm
LENGTH IN INCHES
12
LENGTH IN MM
300mm
USE DESCRIPTION
ABS OPEN WEB TRUSS – WARREN STYLE 2 Use for roof trusses, bridges, conveyors, space frames and other steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or pro
Plastruct 90406 ABS 5/8 Warren Open Web Truss (2pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
5/8
HEIGHT IN MM
15.9mm
WIDTH IN INCHES
1-3/32
WIDTH IN MM
27.8mm
THICKNESS IN INCHES
1/4
THICKNESSS IN MM
6.4mm
LENGTH IN INCHES
12
LENGTH IN MM
300mm
USE DESCRIPTION
ABS OPEN WEB TRUSS – WARREN STYLE 2 Use for roof trusses, bridges, conveyors, space frames and other steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or pro
Plastruct 90405 ABS 1/2 Warren Open Web Truss (2 pcs pkg)
Plastruct 90401 ABS 1/8 Warren Open Web Truss (2pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/8
HEIGHT IN MM
3.2mm
WIDTH IN INCHES
3/16
WIDTH IN MM
4.8mm
THICKNESS IN INCHES
1/16
THICKNESSS IN MM
1.6mm
LENGTH IN INCHES
6
LENGTH IN MM
150mm
USE DESCRIPTION
ABS OPEN WEB TRUSS – WARREN STYLE 2 Use for roof trusses, bridges, conveyors, space frames and other steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or pro
Plastruct 90482 HO ABS Stair Rail (2pcs pkg)
SCALE
HO
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
27/64
HEIGHT IN MM
10.7mm
WIDTH IN INCHES
3/4
WIDTH IN MM
19.1mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
6
LENGTH IN MM
150mm
USE DESCRIPTION
ABS STAIR RAIL Use for hand rails on stairways. Precision Injection Molded in Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is critical.
FMC Chemicals SHPX (996H) - In Service 1966 #76002
FEATURES:
Three body styles & two top hatch sizes
100-Ton & 125-Ton Barber S-2 trucks
Etched metal running boards
Both wire and injection-moulded grab irons
Fully detailed underbody with full discharge piping
Brake equipment and piping variations
Factory-installed air pipes and coupler cut levers
Metal Macdonald-Cartier knuckle couplers
Plastruct 90481 N ABS Stair Rail (2pcs pkg)
SCALE
N
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/4
HEIGHT IN MM
6.4mm
WIDTH IN INCHES
7/16
WIDTH IN MM
11.1mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
3-5/8
LENGTH IN MM
90mm
USE DESCRIPTION
ABS STAIR RAIL Use for hand rails on stairways. Precision Injection Molded in Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is critical. High impact character
Plastruct 90471 N ABS Hand Rail (2pcs pkg)
SCALE
N
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
17/64
HEIGHT IN MM
6.7mm
WIDTH IN INCHES
7/16
WIDTH IN MM
11.1mm
LENGTH IN INCHES
3-5/8
LENGTH IN MM
90mm
USE DESCRIPTION
ABS HAND RAILS Use for hand rails on platforms, walkways, balconies and any other elevated structures with public access. Precision Injection Molded in Gray ABS. Ideal for all outdoor or professional
Plastruct 90442 HO ABS 2 in Stair (2pcs pkg)
SCALE
HO
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
9/64
HEIGHT IN MM
3.6mm
WIDTH IN INCHES
25/64
WIDTH IN MM
9.9mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
5
LENGTH IN MM
125mm
USE DESCRIPTION
ABS STAIR Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded
Plastruct 90441 N scale ABS 2 in Stair (2pcs pkg)
SCALE
N
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/32
HEIGHT IN MM
2.4mm
WIDTH IN INCHES
7/32
WIDTH IN MM
5.6mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
3
LENGTH IN MM
75mm
USE DESCRIPTION
ABS STAIR Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded
5/32In Fluorescent Yellow Rod (5pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Yellow
HEIGHT IN INCHES
5/32In
HEIGHT IN MM
4.0mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
1/8In Fluorescent Yellow Rod (7pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Yellow
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
3/32In Fluorescent Yellow Rod (8pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Yellow
HEIGHT IN INCHES
3/32In
HEIGHT IN MM
2.4mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
1/16In Fluorescent Yellow Rod (10pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic.
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Yellow
HEIGHT IN INCHES
1/16In
HEIGHT IN MM
1.6mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
5/32In Fluorescent Red Rod (5pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Red
HEIGHT IN INCHES
5/32In
HEIGHT IN MM
4.0mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
1/8In Fluorescent Red Rod (7pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Red
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
3/32In Fluorescent Red Rod (8pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Red
HEIGHT IN INCHES
3/32In
HEIGHT IN MM
2.4mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
1/16In Fluorescent Red Rod (10pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic.
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Red
HEIGHT IN INCHES
1/16In
HEIGHT IN MM
1.6mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
5/32In Fluorescent Green Rod (5pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Green
HEIGHT IN INCHES
5/32In
HEIGHT IN MM
4.0mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
1/8In Fluorescent Green Rod (7pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Green
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
3/32In Fluorescent Green Rod (8pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
Green
HEIGHT IN INCHES
3/32In
HEIGHT IN MM
2.4mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
1/16In Fluorescent Green Rod (10pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic.
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
GREEN
HEIGHT IN INCHES
1/16In
HEIGHT IN MM
1.6mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
5/32In Fluorescent Blue Rod (5pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
BLUE
HEIGHT IN INCHES
5/32In
HEIGHT IN MM
4.0mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
1/8In Fluorescent Blue Rod (7pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
BLUE
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
3/32In Fluorescent Blue Rod (8pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
BLUE
HEIGHT IN INCHES
3/32In
HEIGHT IN MM
2.4mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
1/16In Fluorescent Blue Rod (10pcs)
A unique additive in the Acrylic actually gathers light from the sides of the rod and emits it from the ends. Originally developed for education, creative modelers are finding many other uses, including switch lights, auto tail lights, candles and neon signage. New Acrylic formula allows flexibility on 1/80 (3.2mm) and smaller size rods not known to Acrylic Plastics. Precision Extruded in Blue, Green, Red and Yellow Fluorescent Colored Acrylic Plastic
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
BLUE
HEIGHT IN INCHES
1/16In
HEIGHT IN MM
1.6mm
LENGTH IN INCHES
10In
LENGTH IN MM
250mm
1/4In Acrylic Round Rod (10pcs)
This clear solid rod can be used for bracing, cabling, piping, or wherever round stock is appropriate. Also quite useful in crafts and educational projects. Precision Extruded in Clear Acrylic Plastic.
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
CLEAR
HEIGHT IN INCHES
1/4In
HEIGHT IN MM
6.4mm
LENGTH IN INCHES
8-3/4In
LENGTH IN MM
225mm
3/16In Acrylic Round Rod (20pcs)
This clear solid rod can be used for bracing, cabling, piping, or wherever round stock is appropriate. Also quite useful in crafts and educational projects. Precision Extruded in Clear Acrylic Plastic.
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
CLEAR
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
LENGTH IN INCHES
8-3/4In
LENGTH IN MM
225mm
1/8In Acrylic Round Rod (30pcs)
This clear solid rod can be used for bracing, cabling, piping, or wherever round stock is appropriate. Also quite useful in crafts and educational projects. Precision Extruded in Clear Acrylic Plastic.
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
CLEAR
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
LENGTH IN INCHES
8-3/4In
LENGTH IN MM
225mm
1/16In Acrylic Round Rod (40pcs)
This clear solid rod can be used for bracing, cabling, piping, or wherever round stock is appropriate. Also quite useful in crafts and educational projects. Precision Extruded in Clear Acrylic Plastic.
SCALE
ALL
MATERIAL
ACRYLIC
COLOR
CLEAR
HEIGHT IN INCHES
1/16In
HEIGHT IN MM
1.6mm
LENGTH IN INCHES
8-3/4In
LENGTH IN MM
225mm
G (1:24) Custom Spiral Staircase (1pc)
Use in interior applications where a spiral staircase in desired. Combine with other staircases to achieve any configuration. Precision Injection Molded in Styrene Plastic
SCALE
G
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
19/64In
HEIGHT IN MM
7.5mm
WIDTH IN INCHES
1-35/64In
WIDTH IN MM
39.3mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
4-5/32In
LENGTH IN MM
100mm
G (1:24) Custom Right Turn Staircase (1pc)
Use in interior applications where a closed casing or spiral staircase is desired. Combine with other staircases to achieve any configuration. Precision Injection Molded in Styrene Plastic.
SCALE
G
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
19/64In
HEIGHT IN MM
7.5mm
WIDTH IN INCHES
1-9/16In
WIDTH IN MM
39.7mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
2-3/8In
LENGTH IN MM
60mm
G (1:24) Custom Left Turn Staircase (1pc)
Use in interior applications where a closed casing or spiral staircase is desired. Combine with other staircases to achieve any configuration. Precision Injection Molded in Styrene Plastic.
SCALE
G
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
19/64In
HEIGHT IN MM
7.5mm
WIDTH IN INCHES
1-9/16In
WIDTH IN MM
39.7mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
2-3/8In
LENGTH IN MM
60mm
G (1:24) Custom Straight Staircase (1pc)
Use in interior applications where a closed casing is desired. Combine with other staircases to achieve many configurations. Precision Injection Molded in Styrene Plastic. ASSEMBLY REQUIRED
SCALE
G
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
19/64In
HEIGHT IN MM
7.5mm
WIDTH IN INCHES
1-9/16In
WIDTH IN MM
39.7mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
7-1/2In
LENGTH IN MM
190mm
O (1:48) Custom Spiral Staircase (1pc)
Use in interior applications where a spiral staircase in desired. Combine with other staircases to achieve any configuration. Precision Injection Molded in Styrene Plastic
SCALE
O
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
1/8In
HEIGHT IN MM
3.2mm
WIDTH IN INCHES
63/64In
WIDTH IN MM
25.0mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1-7/8In
LENGTH IN MM
50mm
O (1:48) Custom Right Turn Staircase (1pc)
Use in interior applications where a closed casing or spiral staircase is desired. Combine with other staircases to achieve any configuration. Precision Injection Molded in Styrene Plastic.
SCALE
O
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
9/64In
HEIGHT IN MM
3.6mm
WIDTH IN INCHES
57/64In
WIDTH IN MM
22.6mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1
LENGTH IN MM
25mm
O (1:48) Custom Left Turn Staircase (1pc)
Use in interior applications where a closed casing or spiral staircase is desired. Combine with other staircases to achieve any configuration. Precision Injection Molded in Styrene Plastic.
SCALE
O
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
9/64In
HEIGHT IN MM
3.6mm
WIDTH IN INCHES
57/64In
WIDTH IN MM
22.6mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1
LENGTH IN MM
25mm
O (1:48) Custom Straight Staircase (1pc)
Use in interior applications where a closed casing is desired. Combine with other staircases to achieve many configurations. Precision Injection Molded in Styrene Plastic. ASSEMBLY REQUIRED
SCALE
O
MATERIAL
STYRENE
COLOR
WHITE
HEIGHT IN INCHES
9/64In
HEIGHT IN MM
3.6mm
WIDTH IN INCHES
57/64In
WIDTH IN MM
22.6mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
3-3/4In
LENGTH IN MM
95mm
1:16 ABS LADDER (2pcs)
Use as straight ladders commonly found in numerous industrial, commercial, and residential applications. Note, in most industrial applications using a fixed ladder, a cage is also desirable. See CL Safety Cage & Ladder Sets. Precision Injection Molded in Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical.
SCALE
1:16
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/4In
HEIGHT IN MM
19.1mm
WIDTH IN INCHES
1-3/32In
WIDTH IN MM
27.8mm
LENGTH IN INCHES
15In
LENGTH IN MM
375mm
G (1:24) ABS LADDER (2pcs)
Use as straight ladders commonly found in numerous industrial, commercial, and residential applications. Note, in most industrial applications using a fixed ladder, a cage is also desirable. See CL Safety Cage & Ladder Sets. Precision Injection Molded in Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical.
SCALE
1:24
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/2In
HEIGHT IN MM
12.7mm
WIDTH IN INCHES
3/4In
WIDTH IN MM
19.1mm
LENGTH IN INCHES
15In
LENGTH IN MM
375mm
1:32 ABS LADDER (2pcs)
Use as straight ladders commonly found in numerous industrial, commercial, and residential applications. Note, in most industrial applications using a fixed ladder, a cage is also desirable. See CL Safety Cage & Ladder Sets. Precision Injection Molded in Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical.
SCALE
1:32
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/8In
HEIGHT IN MM
9.5mm
WIDTH IN INCHES
39/64In
WIDTH IN MM
15.5mm
LENGTH IN INCHES
15In
LENGTH IN MM
375mm
O (1:48) ABS LADDER (2pcs)
Use as straight ladders commonly found in numerous industrial, commercial, and residential applications. Note, in most industrial applications using a fixed ladder, a cage is also desirable. See CL Safety Cage & Ladder Sets. Precision Injection Molded in Gray ABS Plastic.
Ideal for all outdoor or professional model construction where model life is critical.
SCALE
O
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/4In
HEIGHT IN MM
6.4mm
WIDTH IN INCHES
13/32In
WIDTH IN MM
10.3mm
LENGTH IN INCHES
15In
LENGTH IN MM
375mm
G (1:24) Ladder with Safety Cage (1pc)
Use on towers, tanks, buildings and other tall structures where a ladder is perpindicular (or 90¡) to the ground. Precision Injection Molded in Gray ABS. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
SCALE
G
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1-19/64In
HEIGHT IN MM
32.9mm
LENGTH IN INCHES
1/2In
LENGTH IN MM
300mm
1:32 Ladder with Safety Cage (1pc)
Use on towers, tanks, buildings and other tall structures where a ladder is perpindicular (or 90¡) to the ground. Precision Injection Molded in Gray ABS. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
SCALE
1:32
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1In
HEIGHT IN MM
25.4mm
LENGTH IN INCHES
1/2In
LENGTH IN MM
300mm
O (1:48) Ladder with Safety Cage (1pc)
Use on towers, tanks, buildings and other tall structures where a ladder is perpindicular (or 90¡) to the ground. Precision Injection Molded in Gray ABS. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
SCALE
O
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
23/32In
HEIGHT IN MM
18.3mm
LENGTH IN INCHES
1/2In
LENGTH IN MM
300mm
G (1:24) ABS 2Ft-6In STAIR (1pc)
Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded in Gray ABS Plastic. Ideal for all outdoor or profess model construction where model life is critical.
SCALE
G
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
17/32In
HEIGHT IN MM
13.5mm
WIDTH IN INCHES
1-7/16In
WIDTH IN MM
36.5mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1/2In
LENGTH IN MM
300mm
#1 (1:32) ABS 2Ft-6In STAIR (1pc)
Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded in Gray ABS Plastic. Ideal for all outdoor or profess model construction where model life is critical.
SCALE
1:32
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
13/32In
HEIGHT IN MM
10.3mm
WIDTH IN INCHES
1-1/8In
WIDTH IN MM
28.6mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1/2In
LENGTH IN MM
300mm
O (1:48) ABS 3Ft-0In STAIR (1pc)
Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded in Gray ABS Plastic. Ideal for all outdoor or profess model construction where model life is critical.
SCALE
O
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
17/64In
HEIGHT IN MM
6.7mm
WIDTH IN INCHES
7/8In
WIDTH IN MM
22.2mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1/2In
LENGTH IN MM
300mm
O (1:48) ABS 2Ft-6In STAIR (1pc)
Use for open stairways commonly found in industrial complexes, high-rise fire stairs, parking structures, tanks, platforms and other unfinished or open structures. Precision injection molded in Gray ABS Plastic. Ideal for all outdoor or profess model construction where model life is critical.
SCALE
O
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
17/64In
HEIGHT IN MM
6.7mm
WIDTH IN INCHES
3/4In
WIDTH IN MM
19.1mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
1/2In
LENGTH IN MM
300mm
1:16 ABS Hand Rail (1pc)
Use for hand rails on platforms, walkways, balconies and any other elevated structures with public access. Precision Injection Molded in Gray ABS.
Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
Tip: ABS hand rails may be curved to fit circular applications by softening them in warm water or heating with a hair dryer.
SCALE
1:16
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
2-43/64In
HEIGHT IN MM
67.9mm
WIDTH IN INCHES
4-1/2In
WIDTH IN MM
114.3mm
LENGTH IN INCHES
24In
LENGTH IN MM
600mm
G (1:24) ABS Hand Rail (1pc)
Use for hand rails on platforms, walkways, balconies and any other elevated structures with public access. Precision Injection Molded in Gray ABS.
Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
Tip: ABS hand rails may be curved to fit circular applications by softening them in warm water or heating with a hair dryer.
SCALE
G
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1-3/4In
HEIGHT IN MM
44.5mm
WIDTH IN INCHES
3In
WIDTH IN MM
76.2mm
LENGTH IN INCHES
24In
LENGTH IN MM
600mm
1:32 ABS Hand Rail (1pc)
Use for hand rails on platforms, walkways, balconies and any other elevated structures with public access. Precision Injection Molded in Gray ABS.
Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
Tip: ABS hand rails may be curved to fit circular applications by softening them in warm water or heating with a hair dryer.
SCALE
1:32
HEIGHT IN INCHES
1-11/32In
HEIGHT IN MM
34.1mm
WIDTH IN INCHES
2-1/4In
WIDTH IN MM
57.2mm
LENGTH IN INCHES
24In
1:16 ABS Stair Rail (1pc)
Use for hand rails on stairways. Precision Injection Molded in Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
Tip: ABS Stair Rails may be curved to fit circular application by softening them in warm water or heating with a hair dryer. Stairs may be modified to fit the circumference of a tank or other curved surface by cutting off the stair stringer from the side to be cemented. Tape the stair in place. Attach each stair step separately
SCALE
1:16
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
2-21/32In
HEIGHT IN MM
67.5mm
WIDTH IN INCHES
4-1/2In
WIDTH IN MM
114.3mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
24In
LENGTH IN MM
600mm
G (1:24) ABS Stair Rail (1pc)
Use for hand rails on stairways. Precision Injection Molded in Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
Tip: ABS Stair Rails may be curved to fit circular application by softening them in warm water or heating with a hair dryer. Stairs may be modified to fit the circumference of a tank or other curved surface by cutting off the stair stringer from the side to be cemented. Tape the stair in place. Attach each stair step separately
SCALE
G
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1-3/4In
HEIGHT IN MM
44.5mm
WIDTH IN INCHES
3In
WIDTH IN MM
76.2mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
24In
LENGTH IN MM
600mm
#1 (1:32) ABS Stair Rail (1pc)
Use for hand rails on stairways. Precision Injection Molded in Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
Tip: ABS Stair Rails may be curved to fit circular application by softening them in warm water or heating with a hair dryer. Stairs may be modified to fit the circumference of a tank or other curved surface by cutting off the stair stringer from the side to be cemented. Tape the stair in place. Attach each stair step separately
SCALE
1:32
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1-5/16In
HEIGHT IN MM
33.3mm
WIDTH IN INCHES
2-1/4In
WIDTH IN MM
57.2mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
24In
LENGTH IN MM
600mm
O (1:48) ABS Stair Rail (1Pc)
Use for hand rails on stairways. Precision Injection Molded in Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is critical. High impact characteristics provide durability, flexibility and longevity of the model.
Tip: ABS Stair Rails may be curved to fit circular application by softening them in warm water or heating with a hair dryer. Stairs may be modified to fit the circumference of a tank or other curved surface by cutting off the stair stringer from the side to be cemented. Tape the stair in place. Attach each stair step separately
SCALE
O
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
7/8In
HEIGHT IN MM
22.2mm
WIDTH IN INCHES
1-1/2In
WIDTH IN MM
38.1mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
24In
LENGTH IN MM
600mm
Plastruct 90122 Brass Insert Wire .058 (10pcs pkg)
SCALE
ALL
MATERIAL
BRASS
OUTSIDE DIAMETER (O.D.)
.058
1.5mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
Plastruct 90121 Brass Insert Wire .045 (10pcs pkg)
SCALE
ALL
MATERIAL
BRASS
OUTSIDE DIAMETER (O.D.)
0.45
1.1mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
Plastruct 90174 Butyrate Half Round Profile 3/8 (3 pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
GRAY
OUTSIDE DIAMETER (O.D.)
3/8
9.5mm
INSIDE DIAMETER (I.D.)
1/4
6.4mm
THICKNESS IN INCHES
1/16
THICKNESSS IN MM
1.6mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
HALF ROUND PROFILES Use for the top housing unit of corrugated roll-up doors, large scale gutters and bannister railings, and decorative trim for inside and outside buildings.
Plastruct 90173 Butyrate Half Round Profile 5/16 (4pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
GRAY
OUTSIDE DIAMETER (O.D.)
5/16
7.9mm
INSIDE DIAMETER (I.D.)
3/16
4.8mm
THICKNESS IN INCHES
1/16
THICKNESSS IN MM
1.6mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
HALF ROUND PROFILES Use for the top housing unit of corrugated roll-up doors, large scale gutters and bannister railings, and decorative trim for inside and outside buildings.
Plastruct 90172 Butyrate Half Round Profile 1/4 (4pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
GRAY
OUTSIDE DIAMETER (O.D.)
1/4
6.4mm
INSIDE DIAMETER (I.D.)
1/8
3.2mm
THICKNESS IN INCHES
1/16
THICKNESSS IN MM
1.6mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
HALF ROUND PROFILES Use for the top housing unit of corrugated roll-up doors, large scale gutters and bannister railings, and decorative trim for inside and outside buildings.
Plastruct Butyrate Half Round Profile 3/16 (4pcs pkg)
SCALE
ALL
MATERIAL
BUTYRATE
COLOR
GRAY
OUTSIDE DIAMETER (O.D.)
3/16
4.8mm
INSIDE DIAMETER (I.D.)
3/32
2.4mm
THICKNESS IN INCHES
3/64
THICKNESSS IN MM
1.2mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
HALF ROUND PROFILES Use for the top housing unit of corrugated roll-up doors, large scale gutters and bannister railings, and decorative trim for inside and outside buildings.
Plastruct 90352 ABS Rod 1/4 (5pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/8
HEIGHT IN MM
3.2mm
WIDTH IN INCHES
1/4
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
15
LENGTH IN MM
375mm
Plastruct 90351 ABS ROD 1/8 (5 pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/8
HEIGHT IN MM
3.2mm
WIDTH IN INCHES
1/8
WIDTH IN MM
3.2mm
THICKNESS IN INCHES
.000
LENGTH IN INCHES
15
LENGTH IN MM
375mm
Plastruct 90086 ABS TEE 1/4 (4pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/4
HEIGHT IN MM
6.4mm
WIDTH IN INCHES
1/4
WIDTH IN MM
6.4mm
THICKNESS IN INCHES
.060
THICKNESSS IN MM
1.5mm
LENGTH IN INCHES
24
LENGTH IN MM
600mm
USE DESCRIPTION
ABS TEE Use for bracing in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is
Plastruct 90085 ABS TEE 3/16 (5 pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/16
HEIGHT IN MM
4.8mm
WIDTH IN INCHES
3/16
WIDTH IN MM
4.8mm
THICKNESS IN INCHES
.060
THICKNESSS IN MM
1.5mm
LENGTH IN INCHES
24
LENGTH IN MM
600mm
USE DESCRIPTION
ABS TEE Use for bracing in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is
Plastruct 90084 ABS TEE 1/8 (7pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
1/8
HEIGHT IN MM
3.2mm
WIDTH IN INCHES
1/8
WIDTH IN MM
3.2mm
THICKNESS IN INCHES
.040
THICKNESSS IN MM
1.0mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
ABS TEE Use for bracing in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is
Plastruct 90083 ABS TEE 3/32 (8pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/32
HEIGHT IN MM
2.4mm
WIDTH IN INCHES
3/32
WIDTH IN MM
2.4mm
THICKNESS IN INCHES
.030
THICKNESSS IN MM
0.8mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
ABS TEE Use for bracing in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is
Plastruct 90082 ABS TEE 1/16 (8pcs pkg)
Plastruct 90081 ABS TEE 3/64 (10 pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/64
HEIGHT IN MM
1.2mm
WIDTH IN INCHES
3/64
WIDTH IN MM
1.2mm
THICKNESS IN INCHES
.015
THICKNESSS IN MM
0.4mm
LENGTH IN INCHES
10
LENGTH IN MM
250mm
USE DESCRIPTION
ABS TEE Use for bracing in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or professional model construction where model life is
Plastruct 90067 ABS H Column 3/8 (4pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
3/8
HEIGHT IN MM
9.5mm
WIDTH IN INCHES
3/8
WIDTH IN MM
9.5mm
THICKNESS IN INCHES
.070
THICKNESSS IN MM
1.8mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL ABS H-COLUMNS Use for vertical or diagonal members in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or professional
Plastruct 90066 ABS H Column 5/16 (5pcs pkg)
SCALE
ALL
MATERIAL
ABS
COLOR
GRAY
HEIGHT IN INCHES
5/16
HEIGHT IN MM
7.9mm
WIDTH IN INCHES
5/16
WIDTH IN MM
7.9mm
THICKNESS IN INCHES
.065
THICKNESSS IN MM
1.7mm
LENGTH IN INCHES
15
LENGTH IN MM
375mm
USE DESCRIPTION
TRADITIONAL ABS H-COLUMNS Use for vertical or diagonal members in the construction of most steel structures. Precision Injection Molded in Dark Gray ABS Plastic. Ideal for all outdoor or professional