Walthers 4075 HO Cornerstone - Modern Electrical Gear, Phone Boxes and Natural Gas Meters
Kit pkg(2)
Walthers 4070 HO Cornerstone - Truck and Railroad Docks -3 different Dock Styles - 8 Doors Ways
Kit -
Bachmann 42901 HO E-Z Riders with Ball Bearing Rollers (HO/On30 Scale
4 per pack
Digitrax - PX108-6F HO Power Xtender
PX108-6F HO Power Xtender
Digitrax TL1 - Single DCC Function Decoder with Integrated Transponding
Digitrax TL1 - Single DCC Function Decoder with Integrated Transponding
Woodland Scenics Just Plug Lighting System 5675 - HO/OO - Metal Lamp Post (3/pkg)
HO/OO - Metal Lamp Post (3/pkg)
Woodland Scenics 5676 HO Scale - Twin Lamp Post - 3 sets - Just Plug Lighting System
Twin Lamp Post - 3 sets
Atlas Model Railroad 65 HO Switch Machine - Under Table (Right or Left)
65 HO Switch Machine - Under Table (Right or Left)
Walthers 3155 HO Cornerstone Street System Expander - Concrete Street System
Straight Sections pkg(10)
Walthers 3156 HO Cornerstone Street System Expander - Brick Street System
Straight Sections pkg(10)
Woodland Scenics 5060 HO Grillin & Chillin Trailer w/Lights - Built-&-Ready(R) Landmark Structure(R)
Assembled
Woodland Scenics 4950 N Scale Grillin & Chillin Trailer w/Lights - Built-&-Ready(R) Landmark Structure(R)
Assembled
NCE 229 Six pack of 1 Amp replacement lamps for CP6
NCE 229 Six pack of 1 Amp replacement lamps for CP6
NCE 305 RC Filter (Snubber)
RC Filter (Snubber)
Rapido HO 320502 Branchline 3/32 inch 2mm Thick 1-9/16 inch Top Width 1-7/8 inch Base Width 25 Ft Roll Road Bed
HO Scale Branchline 3 32 2mm Thick 1-9 16 Top Width 1-7 8 Base Width 25 Roll
Rapido 320501 HO Scale Noise Killer Foam Roadbed Mainline 18 3.5mm Thick 1 1/2 inches Top-Width 1 7/8 inches Base Width 25 Ft Roll
HO Scale Noise Killer Foam Roadbed Mainline 18 3.5mm Thick 1 1/2 inches Top-Width 1 7/8 inches Base Width 25 Ft Roll
Circuitron 6100 Remote Tortoise Mount
Remote Tortoise Mount
Walthers 4151 HO SceneMaster - Freight Loads
Freight Loads - 146 parts
Digitrax DN166PS - N/HO Scale 1 Amp Mobile Decoder
N/HO Scale 1 Amp Mobile Decoder
Digitrax BD4N - DCC 4 Block Occupancy Detector
DCC 4 Block Occupancy Detector
NCE 205 - All Scale BD20 - Block Detector Module
All Scale BD20 - Block Detector Module
Walthers 4076 HO Modern Guard Shack - Kit
Modern Guard Shack - Kit
Blair Line 129 - HO Laser-Cut 2-Lane Curved Wood Grade Crossing - 29-31in Radius (2)
HO Laser-Cut 2-Lane Curved Wood Grade Crossing - 29-31in Radius (2)
Blair Line 128 - HO Laser-Cut 2-Lane Curved Wood Grade Crossing - 23-25in Radius (2)
HO Laser-Cut 2-Lane Curved Wood Grade Crossing - 23-25in Radius (2)
Athearn 99007 Flat Head Screw, Phillip Head 2-56 x 1/4inch (24 pcs)
Length - 1/4 inches - colour -Black
Athearn 99006 Round Head Screw, Phillip Head 2-56 x 1/2inch (24 pcs)
Length - 1/2 inches - colour -Black
Athearn 99005 Round Head Screw, Phillip Head 2-56 x 7/16inch (24 pcs)
Length - 7/16 inches - colour -Black
Athearn 99003 Round Head Screw, Phillip Head 2-56 x 5/16inch (24 pcs)
Length - 5/16 inches - colour -Black
Athearn 99000 Round Head Screw, Phillip Head 2-56 x 1/8inch (24 pcs)
Length - 1/8 inches - colour -Black
Athearn 99001 Round Head Screw, Phillip Head 2-56 x 3/16inch (24 pcs)
Length - 3/16 inches - colour -Black
Athearn 99002 Round Head Screw, Phillip Head 2-56 x 1/4inch (24 pcs)
Length - 1/4 inches - colour -Black
Athearn 99004 Round Head Screw, Phillip Head 2-56 x 3/8inch (24 pcs)
Length - 3/8 inches - colour -Black
Digitrax BXP88 - LocoNet Occupancy Detector
LocoNet Occupancy Detector
Walthers Cornerstone 4068 - HO Truck & Rail Scale - Kit
HO Truck & Rail Scale - Kit
Kato Unitrack 2142 - HO Rerailer Track - 4-7/8 Inches (2pk)
HO Rerailer Track - 4-7/8 Inches (2pk)
Walthers 4077 HO Cornerstone - HVAC Units
Kit - 4 Each of 2 Styles
Rix 611 HO Cyclones & Vents for Industrial Buildings - 10 pcs
Cyclones & Vents for Industrial Buildings - 10 pcs
Woodland Scenics 1445 Low Temp Foam Glue Gun
Low Temp Foam Glue Gun
Downtown Deco 1052 HO - Sisters of Mercy Thrift Store - Kit
Sisters of Mercy Thrift Store - Kit
Kato 2-143 HO Unitrack Uncoupling track S123U [2 pcs]
123mm (4 7/8 inches ) Uncoupling track [2 pcs] - S123U
Athearn G63839 HO Genesis Motor Retrofit Kit for RTR SD45/SD40 with Included extended Dog-Bone universal - 2pcs.
Genesis Motor Retrofit Kit for RTR SD45/SD40 with Included extended Dog-Bone universal - 2pcs.
Custom Finishing 206 HO ALCO Steam Generator Intake Vents (Brass Castings; pkg(2)
ALCO Steam Generator Intake Vents (Brass Castings; pkg(2)
JL Innovative Design 438 HO Custom Gas Station Junk Pile & Hazardous Material Barrel - Set 1
Custom Gas Station Junk Pile & Hazardous Material Barrel - Set 1
Digitrax PS615 - 90W AC/DC 15VDC 6 Amp Power Supply
Digitrax PS615 - 90W AC/DC 15VDC 6 Amp Power Supply
Walthers 1203 SceneMaster - Static Grass Flocking - Yellow 1/16inch 1.5mm Fibers
SceneMaster - Static Grass Flocking - Yellow 1/16inch 1.5mm Fibers
Walthers 1206 SceneMaster - Static Grass Flocking - Green - 3/32inch 2.5mm Fibers
Static Grass Flocking - Green - 3/32inch 2.5mm Fibers
Walthers 1201 SceneMaster - Static Grass Flocking - Dark Green 1/16inch 1.5mm Fibers
SceneMaster - Static Grass Flocking - Dark Green 1/16inch 1.5mm Fibers
Walthers 1204 SceneMaster - Static Grass Flocking - Brown
Brown 1/16inch 1.5mm Fibers, 3-1/2oz 100g
Walthers 1202 SceneMaster - Static Grass Flocking - Green Blend
Green Blend 1/16inch 1.5mm Fibers, 3-1/2oz 100g
Walthers 1205 SceneMaster - Static Grass Flocking - Dark Green - 3/32inch 2.5mm Fibers
Static Grass Flocking - Dark Green - 3/32inch 2.5mm Fibers
Bowser 24510 HO GMD SD40-2 ESU LokSound & DCC - St L& H (St Lawrence and Hudson) #5593
St L& H (St Lawrence and Hudson) #5593 - ESU LokSound & DCC
Bowser 6-24512 HO GMD SD40-2 ESU LokSound & DCC - St L& H (St Lawrence and Hudson) #5690
St L& H (St Lawrence and Hudson) #5690 - ESU LokSound & DCC
Kadee 156 - HO Whisker Scale Metal Couplers w/Gearboxes - Long (25/64in) Centerset Shank (2pair)
HO Whisker Scale Metal Couplers w/Gearboxes - Long (25/64in) Centerset Shank (2pair)
Walthers Cornerstone 3515 - HO Caged Ladders & Vents (5 Each) - Kit
HO Caged Ladders & Vents (5 Each) - Kit
Walthers 8360 Scene Master Hi Cube Refrigerator Container Evergreen
Scene Master Hi Cube Refrigerator Container Evergreen
Walthers 4090 - HO Cornerstone Aggregate Bins - Kit
HO Cornerstone Aggregate Bins - Kit
Walthers 4074 HO Cornerstone Security Details
Cornerstone Security Details
Walthers 4069 HO Modern Cold Storage Warehouse
Modern Cold Storage Warehouse
Woodland Scenics 1125 - Tree Armatures - Pine - 4-6 inches (44pk)
Tree Armatures - Pine - 4-6 inches (44pk)
Woodland Scenics 1124 - Tree Armatures - Pine - 2-1/2 - 4 inches (70pk)
Tree Armatures - Pine - 2-1/2 - 4 inches (70pk)
Woodland Scenics 1123 - Tree Armatures - Deciduous - 5-7 inches (12pk)
Tree Armatures - Deciduous - 5-7 inches (12pk)
Microscale MC-4161 - HO Diesel Data - EMD SD70 Series (1988+) - Decals
HO Diesel Data - EMD SD70 Series (1988+) - Decals
Preiser 10037 HO People Working - Crane Operators pkg(6)
People Working - Crane Operators pkg(6)
Athearn G69223 HO EMD SD70M w/DCCReady, CSX #4679
CSX #4679
Microscale Decals 87-1317 HO GATX Rail Locomotive Group & Marquette Lease Diesels & Marquette Cabooses.
GATX Rail Locomotive Group & Marquette Lease Diesels & Marquette Cabooses.
Microscale 87-1117 HO First Union Rail (FURX) - Leasing Diesels
First Union Rail (FURX) - Leasing Diesels
Athearn Genesis HO Scale G63454 Prime Air Conditioner Set (6)
HO Scale G63454 Prime Air Conditioner Set (6)
Woodland Scenics 4524 Water Tint - Yellow Silt
Water Tint - Yellow Silt
Woodland Scenics 4523 Water Tint - Olive Drab
Water Tint - Olive Drab
Woodland Scenics 4522 Water Tint - Sage Green
Water Tint - Sage Green
Woodland Scenics 4521 Water Tint - Moss Green
Water Tint - Moss Green
Woodland Scenics 4525 Water Tint - Murky
Water Tint - Murky
Woodland Scenics 4520 Water Tint - Turquoise
Water Tint - Turquoise
Woodland Scenics 4519 Water Tint - Navy Blue
Water Tint - Navy Blue
Woodland Scenics 4529 White Water Highlight
White Water Highlight
Woodland Scenics 4511 Deep Pour Water - Murky
Deep Pour Water - Murky
Woodland Scenics 4531 Water Undercoat - Navy Blue
Navy Blue
Woodland Scenics 4530 Water Undercoat - Deep Blue
Deep Blue
Woodland Scenics 4532 Water Undercoat - Hunter Green
Hunter Green
Woodland Scenics 4535 Water Undercoat - Yellow Silt
Yellow Silt
Woodland Scenics 4516 Surface Water - Water Waves
Surface Water - Water Waves
Woodland Scenics 4539 Dust Dabber
Dust Dabber
Woodland Scenics 4534 Water Undercoat - Olive Drab
Olive Drab
Woodland Scenics 4533 Water Undercoat - Moss Green
Moss Green
Walthers 4148 HO SceneMaster - Safety and Security Posts pkg(20)
Safety and Security Posts pkg(20)
Athearn 97437 HO 52 FT Mill Gondola Detroit Toledo and Ironton - DT and I #9625
Detroit Toledo and Ironton - DT and I #9625
NCE 167 N Scale N14K1 Decoder fits Athearn EMD F45, FP45, Kato Gevo ES44AC, Kato AC4400, Kato C30-7, Kato GE C44-9W, Kato SD40-2 early versions, Kato ES44, SD40, SD40-2 SNOOT, SD45, SD70MAC, SD70
NCE 167 N Scale N14K1 Decoder
Walthers SceneMaster 4147 - HO Dog & Kennel (Doghouse) - Kit
HO Dog & Kennel (Doghouse) - Kit
Walthers SceneMaster 4146 - HO Benches (8 pkg)
HO Benches (8 pkg)
Walthers 4144 HO SceneMaster - Pallet-Jacks - Kit - pkg(4)
Pallet-Jacks - Kit - pkg(4)
Walthers 11635 HO SceneMaster International(R) 4300 Single-Axle Dump Truck - Assembled - White Cab, Silver Dump Box
White Cab, Silver Dump Box w/Railroad Maintenance-of-Way Logo Decals
Walthers 11634 HO SceneMaster - International(R) 4300 Crew Cab Dump Truck - Assembled - White
White w/Railroad Maintenance-of-Way Logo Decals
Intermountain Railway 40052 - HO 33 Inch Semi-Scale Insulated Brass Wheelsets (12/pkg)
HO 33 Inch Semi-Scale Insulated Brass Wheelsets (12/pkg)
Walthers 11702 HO SceneMaster International - MOW Crew Bus - Assembled - White
White
Walthers SceneMaster 11753 - HO International 4300 Utility Truck w/Bucket Lift - Assembled - White
HO International 4300 Utility Truck w/Bucket Lift - Assembled - White
Walthers SceneMaster 11733 - HO International 4300 Utility Truck w/Drill - Assembled - White
HO International 4300 Utility Truck w/Drill - Assembled - White
Walthers 4143 HO SceneMaster - Fire Hydrants - 10 pk
Fire Hydrants - 10 pk
Walthers 3070 HO Cornerstone Operating Single-Track Railroad Bascule Bridge
Kit - 33-1/2 x 3 x 11 inches 83.7 x 7.5 x 27.5cm
BLMA 4512 HO 18 inches Straight Grab Irons (.008inch Formed Wire) - 20pkg
HO 18 inches Straight Grab Irons (.008inch Formed Wire) - 20pkg
Woodland Scenics 5631 HO Arch Cast Iron Street Light - Just Plug(TM) - Package of 3 units
Arch Cast Iron Street Light - Just Plug(TM) - Package of 3 units
Athearn G69234 HO SD70I, DCC Ready - Canadian National CN #5615
DCC Ready - Canadian National CN #5615
Athearn G69332 HO SD70I, DCC & Sound - Canadian National CN #5602
DCC & Sound - Canadian National CN #5602
Walthers Cornerstone 3860 - N Scale Prairie Co-Op Elevator - Kit
N Scale Prairie Co-Op Elevator - Kit
Walthers 11632 HO SceneMaster International(R) 4300 Crew Cab Dump Truck - Assembled - Yellow
Yellow
Walthers 11391 HO SceneMaster International(R) 4900 Dual-Axle Refrigerated Van - Assembled - White Cab, Red Body
White Cab, Red Body
Walthers 11931 HO SceneMaster International(R) 4300 EMS Ambulance - Assembled - Red
Red
Walthers Cornerstone 4063 - HO Trackside Post Office - Kit
HO Trackside Post Office - Kit
Eastern Seaboard Models 225905 N Scale 40 Ft Insulated Boxcar Canadian Pacific 36320 Stacked Block
Canadian Pacific 36320 Stacked Block
Woodland Scenics 5654 HO Wall-Mount Gooseneck Light - Just Plug - pkg(2)
Wall-Mount Gooseneck Light - Just Plug - pkg(2)
Preiser 10016 HO Delivery Men w/Loads
Delivery Men w/Loads
Midwest Products Cork Roadbed N Scale 5 pcs
3 Ft Sections Cork Roadbed N Scale 5 pcs
Woodland Scenics 5740 Just Plug(TM) Lighting System, LED Stick-On Lights, 25mA Warm White (2)
Warm White
Woodland Scenics 5059 - HO Built & Ready Landmark Structures - H&H Feed Mill
Built & Ready Landmark Structures - H&H Feed Mill
Intermountain Railway HO 49806S-02 Paducah GP10 ESU LokSound & DCC - MidSouth 1035
MidSouth 1035 (gray, white, green)
Downtown Deco 1065 - HO Fat Lous Liquor Store - Hydrocal Casting Kit
HO Fat Lous Liquor Store - Hydrocal Casting Kit
Rapido 16076 HO RDC-1- Phase 1b - American Versions - New York Central M459 - DCC Ready
Phase 1b - American Versions - New York Central - DCC Ready M459
Downtown Deco 1054 HO Deteriorated Concrete Sidewalk - Kit
Deteriorated Concrete Sidewalk - Kit
NCE 174 HO D13J Decoder - 1.2 Amp - with NMRA 9 pin DCC Quick Plug and Harness
D13J Decoder - 1.2 Amp with NMRA 9 pin DCC Quick Plug and Harness
NCE 177 HO D13WP Decoder - 1.2 Amp with NMRA 8 pin plug
D13WP Decoder - 1.2 Amp with NMRA 8 pin plug
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 30FT 10m DCC colour Code -Green
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 multi-stran 30FT 10m. - Green
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 30FT 10m DCC colour Code -Gray
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 multi-stran 30FT 10m. - Gray
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 30FT 10m DCC colour Code -Red
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 multi-stran 30FT 10m. - Red
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 30FT 10m DCC colour Code -Yellow
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 multi-stran 30FT 10m. - Yellow
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 30FT 10m DCC colour Code -Purple
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 multi-stran 30FT 10m. - Purple
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 30FT 10m DCC colour Code -Brown
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 multi-stran 30FT 10m. - Brown
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 30FT 10m DCC colour Code -Black
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 multi-stran 30FT 10m. - Black
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 30FT 10m DCC colour Code - Orange
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 multi-stran 30FT 10m. - Orange
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 30FT 10m DCC colour Code -Blue
ESU Super thin cable - 0.02 inch 0.5mm dia. AWG36 multi-stran 30FT 10m. - Blue
NMRA 8 N Scale Standards Gauge
N Scale Standards Gauge
Intermountain Railway 40053 - HO 28 Inch Semi-Scale Insulated Brass Wheelsets - (12/pkg)
HO 28 Inch Semi-Scale Insulated Brass Wheelsets - (12/pkg)
Digitrax DN123K3 N Scale Plug-N-Play Decoder For Kato NW2
DN123K3 N Scale Plug-N-Play Decoder For Kato NW2
Peco PL 13 3013 HO Accessory Switch
Accessory Switch
Walthers 2954 HO Cornerstone Brick Freight House
Kit - 9-3/4 x 9-3/8 x 4-3/8 inches 24.8 x 23.8 x 11.1cm
Rapido 16577 HO RDC-1- Phase 1b - American Versions - New York Central M461- DCC & Sound
Phase1b - American Versions New York Central DCC & Sound M461
Rapido Bits 102067 - HO Scale CN Cast Logo (4pk)
HO Scale CN Cast Logo (4pk)
Rapido Bits 102054 - HO Scale Diesel Loco Details
HO Scale Diesel Loco Details
Intermountain Railway 40073 - HO 36 Inch High Detail Semi-Scale Insulated Brass Wheelsets (12/pkg)
HO 36 Inch High Detail Semi-Scale Insulated Brass Wheelsets (12/pkg)
Woodland Scenics 5051 - HO Built & Ready Landmark Structures - Bettys Burning Building
Built & Ready Landmark Structures - Bettys Burning Building
Woodland Scenics 5026 - HO Built-&-Ready Landmark Structures - Clyde & Dales Barrel Factory
Built-&-Ready Landmark Structures - Clyde & Dales Barrel Factory
Woodland Scenics 5028 - HO Built-&-Ready Landmark Structures - Chips Ice House
Built-&-Ready Landmark Structures - Chips Ice House
Woodland Scenics 5040 - HO Built-&-Ready Landmark Structures - Old Homestead
Built-&-Ready Landmark Structures - Old Homestead
Woodland Scenics 5043 - HO Windmill - Built & Ready Landmark Structures
HO Windmill - Built & Ready Landmark Structures
Assembled - 3-5/8 x 1-3/4 inches 9.2 x 4.5cm
Woodland Scenics 5042 - HO Built-&-Ready Landmark Structures - Old Windmill
Built-&-Ready Landmark Structures - Old Windmill
Woodland Scenics 5031 - HO Built-&-Ready Landmark Structures - Country Store Expansion
Built-&-Ready Landmark Structures - Country Store Expansion
Woodland Scenics 5033 - HO Built-&-Ready Landmark Structures - Citizens Savings & Loan Bank
Built-&-Ready Landmark Structures - Citizens Savings & Loan Bank
Woodland Scenics 5032 - HO Built-&-Ready Landmark Structures - J.W. Cobbler
Built-&-Ready Landmark Structures - J.W. Cobbler
Kadee 23 Plastic-Shank Coupler - Kit - Magne-Matic
Short 1/4inch Centerset w/#213 & #234 Draft Gear Box & Talgo Truck Adaptors 2
Broadway Limited Imports 4229 HO EMD SD7 w/Sound & DCC - Paragon3 - Bessemer & Lake Erie 803
Bessemer & Lake Erie 803
Woodland Scenics 5535 - HO AutoScenes - Thompsons Traveling Trailer
HO AutoScenes - Thompsons Traveling Trailer
Life-Like Products 1009 All Scale - Grass Mat - Light Green - 100 x 25 inch 254 x 63cm
Life-Like Products 1009 All Scale - Grass Mat - Light Green - 100 x 25 inches 254 x 63cm
JL Innovative Design 376 HO Billboard Signs - Vintage Tractors 1940s-50s pkg(6)
JL Innovative Design 376 HO Billboard Signs - Vintage Tractors 1940s-50s pkg(6)
Pikestuff 101 HO Machine Tool Centre
Machine Tool Centre
Pikestuff 8014 N Scale - The Shops (70 x 80ft)
N Scale - The Shops (70 x 80ft)
Pikestuff 102 HO U&K Plastics - Note Colour - Roof White, Side Walls Blue
U&K Plastics - Note Colour - Roof White, Side Walls Blue
Rix Products HO 122 Wrought Iron Highway Overpass w/ Piers - Kit - 50 FT Scale w/1 adjustable Pier
Kit - 50 FT Scale w/1 adjustable Pier
Rix Products HO 121 Wrought Iron Highway Overpass only - Kit - 50 FT Scale - no Piers
Kit - 50 FT Scale -no Piers
Rix Products 204 - HO Maxwell Ave. Porch Kit
HO Maxwell Ave. Porch Kit
Rix Products 503 HO 29 FT Peaked Top Water/Oil Tank
29 FT Water/Oil tank peaked top kit
Walthers SceneMaster 1111 - HO Summer Grass Tufts - 1/4 Inch Tall (42pk)
HO Summer Grass Tufts - 1/4 Inch Tall (42pk)
Walthers SceneMaster 8221 - HO 40ft Hi-Cube Corrugated Container - Yang Ming
HO 40ft Hi-Cube Container w/Flat Roof - Yang Ming
Walthers SceneMaster 8219 - HO 40ft Hi-Cube Corrugated Container - Nedlloyd
HO 40ft Hi-Cube Container w/Flat Roof - Nedlloyd
Walthers SceneMaster 8518 - HO 53ft Singamas Corrugated-Side Container - Canadian National
HO 53ft Singamas Corrugated-Side Container - Canadian National
Walthers SceneMaster 8521 - HO 53ft Singamas Corrugated-Side Container - Hub Group
HO 53ft Singamas Corrugated-Side Container - Hub Group
Rix Products 510 HO Big Blue Storage Silo
Big Blue Storage Silo
Pikestuff 100 HO Rail/Truck Transfer Center
Rail/Truck Transfer Center
Rix Products 100 - HO Highway Pier
HO Highway Pier
Rix Products 201 - HO Maxwell Ave. Home - Kit
HO Maxwell Ave. Home - Kit
Pikestuff 9 HO Service Garage / Machine Shop
Dimensions: 25 X 59 Scale Feet / 3-1/2 X 8-1/8 Inches 541-0009
Pikestuff 12 HO Highway Guardrail (3 Pack)
Highway Guardrail (3 Pack)
Pikestuff 11 - HO Add-on Office/Showroom - Kit
HO Add-on Office/Showroom - Kit
Pikestuff 5005 HO Kitbasher Series - Multi Purpose Building
Multi Purpose Building
Woodland Scenics 5058 HO Wood Shack - Built-&-Ready - Landmark Structures
Wood Shack
Woodland Scenics 5056 HO Tin Shack - Built-&-Ready - Landmark Structures
Tin Shack
Woodland Scenics 5592 - HO Just Plug Lighted Vehicle - City Classic
HO Just Plug Lighted Vehicle - City Classic
Woodland Scenics 5590 - HO Just Plug Lighted Vehicle - Green Pickup
HO Just Plug Lighted Vehicle - Green Pickup
Woodland Scenics 5591 - HO Just Plug Lighted Vehicle - Midnight Ride
HO Just Plug Lighted Vehicle - Midnight Ride
Woodland Scenics 1259 - HO Retaining Wall - Cut Stone (3pcs)
HO Retaining Wall - Cut Stone (3pcs)
Kadee 156-25 - HO Bulk Pack - Whisker Metal Couplers - Long (25/64 inch) Centerset Shank (25pair)
HO Bulk Pack - Whisker Metal Couplers - Long (25/64 inch) Centerset Shank (25pair)
Detail Associates 2007 HO - Cooling Fans - Q-Type 52 inch 1994
Detail Associates 2007 HO - Cooling Fans - Q-Type 52 inch 1994
Bachmann 33109 HO Strolling Figures - 6 Figures
Strolling Figures
Chooch 8340 - HO Single Track Cut Stone Tunnel Portal
HO Single Track Cut Stone Tunnel Portal
Chooch 8350 - HO Double-Track Cut Stone Tunnel Portal - 6 x 5-1/8 Inches (1pc)
HO Double-Track Cut Stone Tunnel Portal - 6 x 5-1/8 Inches (1pc)
Bachmann 39001 - HO Ballast Spreader
HO Ballast Spreader
Chooch Enterprises 8401 - HO Stepped Tunnel Abutment - Cut Stone (1 Pair)
HO Stepped Tunnel Abutment - Cut Stone (1 Pair)
Bachmann Industries Spectrum 380-Ton Schnabel Car w/Transformer Load - Ready to Run - Red, Black, Gray Load, Black Trucks
Red, Black, Gray Load, Black Trucks
Bachmann Industries Spectrum 380-Ton Schnabel Car w/Transformer Load - Ready to Run - Gary, Black, Red Load, Black Trucks
Gray, Black, Red Load, Black Trucks
Chooch Enterprises 8330 - HO Double-Track Concrete Tunnel Portal (1/pkg)
HO Double-Track Concrete Tunnel Portal (1/pkg)
Chooch Enterprises HO Scale Double Track Cut Stone Bridge Pier 214-8432
HO Scale Double Track Cut Stone Bridge Pier
Fits Central Valley Double-Track Truss Bridge
Digitrax SDCK Signal Driver Cable Kit
Signal Driver Cable Kit
Atlas 20 003 764 HO Pressureaide Centerflow Hopper - Casco - 50302
Casco - 50302
Atlas 20 003 762 HO Pressureaide Centerflow Hopper - Casco - 50288
Casco - 50288
Atlas 20 003 763 HO Pressureaide Centerflow Hopper - Casco - 50298
Casco - 50298
InterMountain 49366S-02 HO Diesel EMD SD40-2 ESU LokSound DCC CSX 8811
Diesel EMD SD40-2 CSX 8811
ESU LokSound DCC
Kadee 36 Plastic-Shank Coupler - Kit
Long 25/64inch Centerset w/#233 Draft Gear Boxes 2 Pair
Digitrax TSMK Terminal Strip Mounting Kit - 2 units
Terminal Strip Mounting Kit - 2 units
InterMountain 49371S-04 HO Diesel EMD SD40-2 ESU LokSound DCC - First Union Rail Leasing CEFX #3187
Diesel EMD SD40-2 - First Union Rail Leasing CEFX #3187
ESU LokSound DCC & Sound
InterMountain 49371S-02 HO Diesel EMD SD40-2 ESU LokSound DCC - First Union Rail Leasing CEFX #3183
Diesel EMD SD40-2 - First Union Rail Leasing CEFX #3183
ESU LokSound DCC & Sound
InterMountain 49371S-03 HO Diesel EMD SD40-2 ESU LokSound DCC - First Union Rail Leasing CEFX #3184
Diesel EMD SD40-2 - First Union Rail Leasing CEFX #3184
ESU LokSound DCC & Sound
InterMountain 49371S-01 HO Diesel EMD SD40-2 ESU LokSound DCC - First Union Rail Leasing CEFX #3176
Diesel EMD SD40-2 - First Union Rail Leasing CEFX #3176
ESU LokSound DCC & Sound
InterMountain 49367S-03 HO Diesel EMD SD40-2 ESU LokSound DCC - Saint Lawrence & Hudson #5651
Diesel EMD SD40-2 - Saint Lawrence & Hudson#5651
ESU LokSound DCC & Sound
InterMountain 49367S-04 HO Diesel EMD SD40-2 ESU LokSound DCC - Saint Lawrence & Hudson #5690
Diesel EMD SD40-2 - Saint Lawrence & Hudson#5690
ESU LokSound DCC & Sound
InterMountain 49367S-02 HO Diesel EMD SD40-2 ESU LokSound DCC - Saint Lawrence & Hudson #5627
Diesel EMD SD40-2 - Saint Lawrence & Hudson#5627
ESU LokSound DCC & Sound
InterMountain 49367S-01 HO Diesel EMD SD40-2 ESU LokSound DCC - Saint Lawrence & Hudson #5615
Diesel EMD SD40-2 - Saint Lawrence & Hudson#5615
ESU LokSound DCC & Sound
InterMountain 49367-04 HO Diesel EMD SD40-2 ESU LokPilot DCC - Saint Lawrence & Hudson #5690
Diesel EMD SD40-2 - Saint Lawrence & Hudson#5690
ESU LokPilot DCC -motor and light control
InterMountain 49367-03 HO Diesel EMD SD40-2 ESU LokPilot DCC - Saint Lawrence & Hudson #5651
Diesel EMD SD40-2 - Saint Lawrence & Hudson#5651
ESU LokPilot DCC -motor and light control
InterMountain 49367-02 HO Diesel EMD SD40-2 ESU LokPilot DCC - Saint Lawrence & Hudson #5627
Diesel EMD SD40-2 - Saint Lawrence & Hudson#5627
ESU LokPilot DCC -motor and light control
Walthers SceneMaster 11001 - HO Cable Excavator w/Bucket - Kit
HO Cable Excavator w/Bucket - Kit
Walthers SceneMaster 11003 - HO Farm Combine w/Grain & Corn Heads - Kit
HO Farm Combine w/Grain & Corn Heads - Kit
Busch 6036 HO Asphalt Country Road
HO Asphalt Country Road
Walthers 3089 HO Cornerstone Western Coal Flood Loader - Kit
Western Coal Flood Loader - Kit
Woodland Scenics 64 Coarse Turf Medium Green Bag 25.2 in (412 cm)
Turf Medium Green
Walthers SceneMaster 8213 - HO 40ft Hi-Cube Corrugated Container - APL
HO 40ft Hi-Cube Container w/Flat Roof - APL
Walthers 2859 HO Cornerstone Built-ups Motorized 130 Ft Turntable w/DCC - Assembled
Motorized 130 Ft Turntable w/DCC - Assembled
Walthers Cornerstone 2860 - HO Motorized 90ft Turntable - 13-3/4 Inch Overall Diameter
HO Motorized 90ft Turntable - 13-3/4 Inch Overall Diameter
InterMountain 49365-01 HO Diesel EMD SD40-2 ESU LokPilot DCC BC Rail #753
Diesel EMD SD40-2 BC Rail #753
ESU LokPilot DCC -motor and light control
InterMountain 49365S-03 HO Diesel EMD SD40-2 ESU LokSound DCC BC Rail #757
Diesel EMD SD40-2 BC Rail #757
ESU LokSound DCC w/Sound
Walthers Cornerstone 3531 - HO Wood Water Tank - Kit
HO Wood Water Tank - Kit
Woodland Scenics 1901 HO Masonry & Cement Workers
Masonry & Cement Workers
Woodland Scenics 1856 HO Tombstones 20 pcs
Tombstones 20 pcs
Woodland Scenics 1862 HO Farm Horses 6 pcs
Farm Horses 6 pcs
Woodland Scenics 5048 - HO Built-&-Ready Landmark Structures - Ethyls Gas & Service
HO Built-&-Ready Landmark Structures - Ethyls Gas & Service
Walthers Cornerstone 3817 - N Scale Steel Water Tank - Kit
N Scale Steel Water Tank - Kit
Woodland Scenics 5633 HO Scale - Single Lamp Post Street Light - 3 sets - Just Plug Lighting System
Single Lamp Post Street Light - 3 sets
Walthers SceneMaster 1141 - HO Harvest Corn Field - Brown
HO Harvest Corn Field - Brown
Walthers SceneMaster 1140 - HO Summer Corn Field - Green
HO Summer Corn Field - Green
Peco PLS-135 Stationary Decoder for SmartSwitch
Peco PLS-135 Stationary Decoder
Peco SL8348 - HO Code 83 - #4 Wye Turnout
HO Code 83 - #4 Wye Turnout
Walthers 11393 HO SceneMaster International(R) 4900 Dual-Axle Refrigerated Van - Assembled
Orange Cab, White Body
Peco HO SL8390 Code 83 Track Insulfrog 90 Degree Crossing
Code 83 Track Insulfrog 90 Degree Crossing
Kadee 440 - HO 18 Inch Diameter Old-Time Metal Brake Wheels (6pk)
HO 18 Inch Diameter Old-Time Metal Brake Wheels (6pk)
Kadee 22 - HO Plastic Couplers w/Gearboxes - Medium (9/32 inch) Overset Shank (2pair)
HO Plastic Couplers w/Gearboxes - Medium (9/32 inch) Overset Shank (2pair)
Kadee 521 - HO 36Inch Diameter Ribbed Back Passenger Wheelsets (12 sets)
HO 36Inch Diameter Ribbed Back Passenger Wheelsets (12 sets)
Evergreen Scale Models 4514 - 1/8in x 1/8in Opaque White Polystyrene Sidewalk (1 Sheet)
Styrene Sidewalk Sheet - 1/8in x 1/8in Opaque White Polystyrene Sidewalk (1 Sheet)
NCE 230 Mini-Panel - Automation Controller for NCE DCC Systems
Mini-Panel - Automation Controller for NCE DCC Systems
BLMA Models 4390 HO Concrete Segmental Bridge Set A, Plastic Kit
Concrete Segmental Bridge Set A, One Complete Bridge - Plastic Kit
Walthers Trainline 1100 - HO Replacement Pad for Walthers Track Cleaning Cars (1pc)
HO Replacement Pad for Walthers Track Cleaning Cars
Walthers SceneMaster 11732 - HO International 4300 Utility Truck w/Drill - Assembled - Yellow
HO International 4300 Utility Truck w/Drill - Assembled - Yellow
Walthers SceneMaster 4333 - HO Crossing Flashers - Set of 2 Working Signals
HO Crossing Flashers - Set of 2 Working Signals
Detail Associates 1012 HO Headlights - Diesels - Pyle Dual Seal Beam Conversion for 14-1/2 inch Lights pkg(2)
Diesels - Pyle Dual Seal Beam Conversion for 14-1/2 inch Lights pkg(2)
Circuitron 6190 All Scale Tortoise Drilling Template
Circuitron 6190 All Scale Tortoise Drilling Template
ESU 50321 Loksound Loudspeakers 11mm x 15mm 8 Ohms, with sound chamber cube
Loudspeakers 11mm x 15mm 8 Ohms, with sound chamber
Blair Line 2249 - HO Lasercut Graffiti Decals Mega Set - Set #6 pkg(9)
HO Lasercut Graffiti Decals Mega Set - Set #6 pkg(9)
Blair Line 2259 - HO Lasercut Graffiti Decals Mega Set - Set #10 pkg(11)
HO Lasercut Graffiti Decals Mega Set - Set #10 pkg(11)
Blair Line 2258 - HO Lasercut Graffiti Decals Mega Set - Set #9 pkg(9)
HO Lasercut Graffiti Decals Mega Set - Set #9 pkg(9)
Blair Line 2245 - HO Lasercut Graffiti Decals Mega Set - Set #2 pkg(9)
HO Lasercut Graffiti Decals Mega Set - Set #2 pkg(9)
Mascot Precision Tools 810 Pin Vise - Double End
Mascot Precision Tools 810 Pin Vise - Double End
Woodland Scenics 1842 HO Chestnut Horses
pkg(6)
Walthers 4136 HO SceneMaster Milk Cans, Bottles & Cases
Milk Cans, Bottles & Cases
Walthers SceneMaster 1142 - HO Spring Wheat Field - Green
HO Spring Wheat Field - Green
Digitrax DH126MT - For HO Scale Locomotives Equipped with 21MTC Interface
For HO Scale Locomotives Equipped with 21MTC Interface
Woodland Scenics 5640 N Scale - Double Lamp Post Street Lights - 3pcs - Just Plug Lighting System
Double Lamp Post Street Lights - 3 units
Woodland Scenics 5641 N Scale - Lamp Post Street Lights - 3pcs - Just Plug Lighting System
Lamp Post Street Lights - 3 units
Downtown Deco 1056 - HO Factory Flat - Cast Hydrocal Kit
HO Factory Flat - Cast Hydrocal Kit
Woodland Scenics 5630 HO Wooden Pole Street Light - Just Plug(TM) - Package of 3 units
Wooden Pole Street Light - Just Plug(TM) - Package of 3 units
Walthers SceneMaster 8516 - HO 53ft Singamas Corrugated-Side Container - Matson
HO 53ft Singamas Corrugated-Side Container - Matson
Walthers SceneMaster 8513 - HO 53ft Singamas Corrugated-Side Container - Canadian National
HO 53ft Singamas Corrugated-Side Container - Canadian National
Walthers SceneMaster 8514 - HO 53ft Singamas Corrugated-Side Container - Canadian Tire
HO 53ft Singamas Corrugated-Side Container - Canadian Tire
Downtown Deco 1039 - HO Old Brick Sidewalks - Cast Hydrocal Kit
HO Old Brick Sidewalks - Cast Hydrocal Kit
Woodland Scenics 1238 Rock Molds - Weathered Rock
Rock Molds - Weathered Rock
Woodland Scenics 5632 HO Scale - Double Lamp Post Street Lights - 3 sets - Just Plug Lighting System
Double Lamp Post Street Lights - 3 sets
A-Line 29212 - HO Etched Brass Cab Sunshades - Comfort Cab (4pk)
HO Etched Brass Cab Sunshades - Comfort Cab (4pk)
A-Line 29211 - HO Etched Brass Cab Sunshades - E & F Unit Diesels (6pk)
HO Etched Brass Cab Sunshades - E & F Unit Diesels (6pk)
Monroe Models 2217 - HO Double Billboard - Kit
HO Double Billboard - Kit
Chooch 8450 HO Double-Track Cut Stone Bridge Abutment - Fits Central Valley Double-Track Truss Bridge
Double-Track Cut Stone Bridge Abutment - Fits Central Valley Double-Track Truss Bridge
Walthers Cornerstone 3169 - HO Tanker Truck Loading Rack - Kit
Kit - 7 x 3-1/2 x 3-3/16inch 17.8 x 8.9 x 8.1cm
Bowser Executive Line 24066 HO Diesel F7a ESU DCC & Lok Sound New York Central #1842
New York Central #1842 - ESU DCC & Lok Sound
Bowser Executive Line Diesel F7a DCC & ESU Lok Sound Alaska Railroad #1508
Alaska Railroad #1508 - DCC & Lok Sound
Athearn G69317 HO EMD SD75M w/DCC & Sound, Norfolk Southern NS #2805
Norfolk Southern NS #2805
Athearn G69316 HO EMD SD75M w/DCC & Sound, Norfolk Southern NS #2802
Norfolk Southern NS #2802
Athearn Genesis G69299 - HO SD70 - DCC/Sound - Illinois Central #1037
HO SD70 - DCC/Sound - Illinois Central #1037
Athearn Genesis G69297 - HO SD70 - DCC/Sound - Illinois Central #1025
HO SD70 - DCC/Sound - Illinois Central #1025
Woodland Scenics 5055 - HO Built-&-Ready Landmark Structures - Emilios Italian Restaurant
Built-&-Ready Landmark Structures - Emilios Italian Restaurant
A-Line 11005 HO Coupler Box Covers - For Athearn Rolling Stock pkg(12
HO Scale Coupler Box Covers - For Athearn Rolling Stock pkg(12
Hi-Tech Details HO 6027 Antenna Dome Small Style for UP, BNSF, CR and Others
Hi-Tech Details HO 6027 Antenna Dome Small Style for UP, BNSF, CR and Others
Hi-Tech Details HO 6003 Universal Antenna Dome GE Version for BNSF and UP
Hi-Tech Details HO 6003 Universal Antenna Dome GE Version for BNSF and UP
Kadee 1059 - Tap 00-90 and Drills #62 & #56
Tap 00-90 and Drills #62 & #56
Kadee 206 HO Insulated Muti-Purpose Coupler Height Gauge
#206 HO Insulated Muti-Purpose Coupler Height Gauge
Walthers 2320 HO Cornerstone Turntable Control Box
Walthers Cornerstone Turntable Control Box
Kadee 211 - HO Styrene Gearbox Shims (20pk)
HO Styrene Gearbox Shims (20pk)
Details West 360 HO Ditch Lights - EMD - Predrilled w/3-Volt Bulbs
Ditch Lights - Predrilled w/3-Volt Bulbs
Intermountain Railway 47071-01 HO ACF 4650 Cubic Foot 3-Bay Hopper - Detroit, Toledo and Ironton - DT&I - #10303
Detroit, Toledo and Ironton - DT&I - #10303
Intermountain Railway 47077-02 HO ACF 4650 Cubic Foot 3-Bay Hopper Erie Lackawanna EL #20112
Erie Lackawanna EL #20112
Walthers 4121 HO SceneMaster City Street Accessory Package
HO SceneMaster City Street Accessory Package
Atlas Model Railroad 52 HO Remote Control Switch Machine - Left Hand
Left Hand
Atlas Model Railroad 53 HO Remote Control Switch Machine - Right Hand
Right Hand
BLMA Models 4553 HO Carrier Reefer Unit
Carrier Reefer Unit
Atlas Model Railroad 577 HO Code 83 Crossing - Nickel Silver w/Brown Ties - 90 Degrees
Code 83 Crossing - Nickel Silver w/Brown Ties - 90 Degrees
Atlas Model Railroad 574 HO Code 83 Crossing - Nickel Silver w/Brown Ties - 30 Degrees
Code 83 Crossing - Nickel Silver w/Brown Ties - 30 Degrees
Atlas Model Railroad 176 HO Code 100 Custom-Line(R) Crossing 90-Degrees - 6inch 15.2cm, Black Ties
HO Code 100 Custom-Line(R) Crossing 90-Degrees - 6inch 15.2cm, Black Ties
Peco Code 83 SL 8382 Streamline #8 Insulfrog Turnout - Nickel Silver Left Hand, Insulfrog HO Scale Track
Peco Code 83 SL 8382 Streamline #8 Insulfrog Turnout - Nickel Silver Left Hand HO Scale Track
Walthers Cornerstone 4509 - HO 30Ft Single-Track Railroad Through Girder Bridge - Low Level Kit
HO 30Ft Single-Track Railroad Through Girder Bridge - Low Level Kit
Walthers Cornerstone 4506 - HO 50Ft Single Track Railroad Deck Girder Bridge - Kit
HO 50Ft Single Track Railroad Deck Girder Bridge - Kit
Walthers Cornerstone 4507 - HO 70Ft Single Track Railroad Deck Girder Bridge - Kit
HO 70Ft Single Track Railroad Deck Girder Bridge - Kit
Walthers Cornerstone 4505 - HO 30ft Single-Track Railroad Deck Girder Bridge - Kit
HO 30ft Single-Track Railroad Deck Girder Bridge - Kit
Walthers Cornerstone 4500 - HO 30Ft Single-Track Railroad Through Girder Bridge - Kit
HO 30Ft Single-Track Railroad Through Girder Bridge - Kit
Walthers Cornerstone 4552 - HO Double-Track Railroad Bridge Concrete Pier 2-Pack - Kit
HO Double-Track Railroad Bridge Concrete Pier 2-Pack - Kit
Walthers Cornerstone 4553 - HO Double-Track Railroad Bridge Concrete Abutment - Kit (2-Pack)
HO Double-Track Railroad Bridge Concrete Abutment - Kit (2-Pack)
Walthers Cornerstone 4508 - HO 90ft Single-Track Railroad Deck Girder Bridge - Kit
HO 90ft Single-Track Railroad Deck Girder Bridge - Kit
Walthers Cornerstone 4550 - HO Single-Track Railroad Bridge Concrete Piers 2-Pack - Kit
HO Single-Track Railroad Bridge Concrete Piers 2-Pack - Kit
Walthers Cornerstone 4555 - HO Steel Railroad Bridge Tower Bent 2-Pack - Kit
HO Steel Railroad Bridge Tower Bent 2-Pack - Kit
Walthers Cornerstone 4554 - HO Steel Railroad Bridge Tower - Kit
HO Steel Railroad Bridge Tower - Kit
Peco Code 83 SL 8381 Streamline #8 Insulfrog Turnout - Nickel Silver Right Hand, Insulfrog HO Scale Track
Peco Code 83 SL 8381 Streamline #8 Insulfrog Turnout - Nickel Silver Right Hand HO Scale Track
Aero-Car Hobby Lubricants 6006 - Track & Rail Cleaner & Conditioner 8oz.
Track & Rail Cleaner & Conditioner 8oz.
Hi-Tech Details 8009 HO 96-Gallon Wheeled Trash & Recycling Bin - Kit - Brown pkg(6)
Kit - Brown pkg(6)
Hi-Tech Details 8008 HO 96-Gallon Wheeled Trash & Recycling Bin - Kit - Blue pkg(6)
Kit - Blue pkg(6)
Hi-Tech Details 8006 HO 96-Gallon Wheeled Trash & Recycling Bin - Kit - Green pkg(6)
Kit - Green pkg(6)
Hi-Tech Details 8012 HO Window Air Conditioning Unit (pkg 4) - Tan
Window Air Conditioning Unit (pkg 4) - Tan
Hi-Tech Details 8004 HO Parking Meter pkg(14) - Zinc (silver)
Parking Meter pkg(14) - Zinc (silver)
Hi-Tech Details 8005 HO Parking Meter pkg(14) - Yellow
Parking Meter pkg(14) - Yellow
Peco PL10E Switch Machine w/Extended Pin
Peco PL10E Switch Machine w/Extended Pin
Blair Line 2705 - HO Central Air Conditioner Unit - Kit (3pk)
HO Central Air Conditioner Unit - Kit (3pk)
American Model Builders 206 - HO Structural Flat Car Load w/Blocking (Laser-Cut Wood, Wire & Plastic Kit)
HO Structural Flat Car Load w/Blocking (Laser-Cut Wood, Wire & Plastic Kit)
Blair Line 118 - HO Two-Lane Wood Grade Crossings - Kit (12/pk)
HO Two-Lane Wood Grade Crossings - Kit (12/pk)
Blair Line 2007 - HO Farmers Fertilizer Bulk Plant - Laser-Cut Kit
HO Farmers Fertilizer Bulk Plant - Laser-Cut Kit
Faller 170490 - Super Expert Liquid Cement - Glue (25g)
Super Expert Liquid Cement - Glue (25g)
WalthersTrainline 917 HO Factory
Factory - Kit
Kadee 118 SF Shelf Whisker Metal Couplers - Medium Centerset
SF Shelf Whisker Metal Couplers - Medium Centerset
Woodland Scenics 46 Fine Turf - Weeds
Fine Turf - Weeds
Woodland Scenics 144 Bushes Clump-Foliage 25.2 cu.in Olive Green
Olive Green
Woodland Scenics 146 Bushes Clump-Foliage 25.2 cu.in - Medium Green
Medium Green
Woodland Scenics 135 Underbrush - Light Green - 25.2 cu in - (412 cu cm)
Light Green
Woodland Scenics 138 Underbrush - Forest Green - 25.2 cu in - (412 cu cm)
Forest Green
Woodland Scenics 134 Underbrush - Olive Green - 25.2 cu in - (412 cu cm)
Olive Green
Woodland Scenics 136 Underbrush - Medium Green - 25.2 cu in - (412 cu cm)
Medium Green
Woodland Scenics 139 Underbrush - Forest Blend - 25.2 cu in - (412 cu cm)
Forest Blend
Woodland Scenics 44 - Fine Turf - Burnt Grass - Bag (21.6 in3)
Fine Turf - Burnt Grass - Bag (21.6 in3)
Woodland Scenics 41 Fine Turf - Soil
Fine Turf - Soil
Woodland Scenics 137 Underbrush - Dark Green - 25.2 cu in - (412 cu cm)
Dark Green
Woodland Scenics 50 - Blended Turf - Earth Blend - Bag (54.1 in3)
Blended Turf - Earth Blend - Bag (54.1 in3)
Woodland Scenics 59 - Foliage Clusters - Dark Green (50.8 in3)
Foliage Clusters - Dark Green (50.8 in3)
Woodland Scenics 166 Lichen - Natural
Lichen - Natural
Woodland Scenics 161 Lichen - Spring Green
Lichen Spring Green
Woodland Scenics 57 - Foliage Clusters - Light Green (50.8 in3)
Foliage Clusters - Light Green (50.8 in3)
Woodland Scenics 164 - Lichen - Dark Green (86.6 in3)
Lichen - Dark Green (86.6 in3)
Woodland Scenics 149 Bushes Clump-Foliage 18 cu.in - Forest Blend
Forest Blend
Woodland Scenics 167 Lichen Light Green Mix
Lichen Light Green Mix
Woodland Scenics 168 - Lichen - Dark Green Mix (173 in3)
Lichen - Dark Green Mix (173 in3)
Blair Line 124 HO Handcar Set-Off - Kit (Laser Cut Wood)
HO Handcar Set-Off - Kit (Laser Cut Wood)
Blair Line 119 - HO 1-3/4 inch 1-Lane Wood Grade Crossing - Kit (3/pk)
HO 1-3/4 inch 1-Lane Wood Grade Crossing - Kit (3/pk)
Walthers 11291 HO SceneMaster International(R) 4900 Single-Axle Box Van - Assembled - Red Cab & White Box
Red Cab & White Box
Walthers 11290 HO SceneMaster International(R) 4900 Single-Axle Box Van - Assembled - White Cab & Box
White Cab & Box
Walthers Cornerstone 4559 - HO Bridge Shoes & Adapters Assortment - 4 Units - Kit
HO Bridge Shoes & Adapters Assortment - 4 Units - Kit
SoundTraxx 810135 - 9-Pin JST To NMRA 8-Pin Wiring Harness
9-Pin JST To NMRA 8-Pin Wiring Harness
Walthers Cornerstone 4503 - HO 90Ft Single-Track Railroad Through Girder Bridge - Kit
HO 90Ft Single-Track Railroad Through Girder Bridge - Kit
Walthers Cornerstone 4551 - HO Single-Track Railroad Bridge Concrete Abutments - Kit (2pk)
HO Single-Track Railroad Bridge Concrete Abutments - Kit (2pk)
Walthers Cornerstone 4502 - HO 70ft Single-Track Railroad Through Girder Bridge - Kit
HO 70ft Single-Track Railroad Through Girder Bridge - Kit
Walthers Cornerstone 4501 - HO 50ft Single-Track Railroad Through Girder Bridge - Kit
HO 50ft Single-Track Railroad Through Girder Bridge - Kit
Walthers Cornerstone 4059 - HO Trackside Oil Dealer with Storage Tanks - Kit
HO Trackside Oil Dealer with Storage Tanks - Kit
Walthers Cornerstone 2851 - HO Built-ups - Motorized 110Ft Turntable w/DCC - Assembled
HO Built-ups - Motorized 110Ft Turntable w/DCC - Assembled
Woodland Scenics 5742 All Scale Stick-On LED pkg(2) - Just Plug Lighting System - Yellow
Yellow
Atlas 286 - HO Mark IV Code 100 #8 Right Turnout
HO Mark IV Code 100 #8 Right Turnout
Woodland Scenics 148 Bushes Clump-Foliage 18 cu.in - Forest Green
Forest Green
Woodland Scenics 684 - Clump Foliage - Dark Green - Bag (57.7 in3)
Clump Foliage - Dark Green - Bag (57.7 in3)
Woodland Scenics 1389 - Ballast - Coarse Gray - Shaker (57.7 in3)
Ballast - Coarse Gray - Shaker (57.7 in3)
Woodland Scenics 1381 - Ballast - Medium Light Gray - Shaker (57.7 in3)
Ballast - Medium Light Gray - Shaker (57.7 in3)
Woodland Scenics 654 - Lubricant - Lite Oil - 1/2oz
Lubricant - Lite Oil - 1/2oz
Woodland Scenics 655 - Lubricant - Gear Lube - 1/2oz
Lubricant - Gear Lube - 1/2oz
Walthers Goo 1oz 29.lmL Tube
Walthers Goo 1oz 29.lmL Tube
Downtown Deco 1060 HO The Worst Block in Town -Kit
The Worst Block in Town -Kit
American Model Builders 909 - HO Laser-Cut Acrylic Wheel Masks for Intermountain/Reboxx 36 Inch Wheels
HO Laser-Cut Acrylic Wheel Masks for Intermountain/Reboxx 36 Inch Wheels
American Model Builders 908 - HO Laser-Cut Acrylic Wheel Masks for Intermountain/Reboxx 33 Inch Wheels
HO Laser-Cut Acrylic Wheel Masks for Intermountain/Reboxx 33 Inch Wheels
American Model Builders 906 - HO Laser-Cut Acrylic Wheel Mask for Kadee 33 Inch Wheels
HO Laser-Cut Acrylic Wheel Mask for Kadee 33 Inch Wheels
Walthers Cornerstone 3493 - HO Public Library - Kit
HO Public Library - Kit
Micro Engineering 75524 - HO Tall Steel Viaduct Length Extension - 80Ft
HO Tall Steel Viaduct Length Extension - 80Ft
Micro Engineering 75515 - HO Tall Steel Viaduct Kit - Scale Length: 210Ft 64m
HO Tall Steel Viaduct Kit - Scale Length: 210Ft 64m
Atlas Model Railroad 565 - HO Custom-Line Code 83 - #8 Left Hand Turnout
HO Custom-Line Code 83 - #8 Left Hand Turnout
Atlas Model Railroad 566 - HO Custom-Line Code 83 - #8 Right Hand Turnout
HO Custom-Line Code 83 - #8 Right Hand Turnout
Rapido 320003 HO RailCrew ON-OFF Remote Uncoupler - 12 units
ON-OFF Remote Uncoupler - 12 units
Athearn G68715 HO SD70ACe, DCC Ready, EMD/Blue #1202
EMD/Blue #1202
Athearn G68716 HO SD70ACe, DCC Ready, EMD/Blue #1203
EMD/Blue #1203
Athearn G68717 HO SD70ACe, DCC Ready, EMD/Blue #1204
EMD/Blue #1204
Athearn Genesis G68816 HO SD70ACe, w/DCC & Sound, EMD/Blue #1203
EMD/Blue #1203
Ideal 30-107J Can Twist Wire Connector - Blue 10 pcs
Ideal 30-107J Can Twist Wire Connector - Blue 10 pcs
Walthers Cornerstone 3663 - HO Rocky Point Lighthouse - Kit
HO Rocky Point Lighthouse - Kit
Walthers SceneMaster 4106 HO Industrial Dumpsters
Kit - 2 Large Roll-Off, 2 Medium Roll-Off, 4 Scrap Metal Slide-Off
Kadee 236 Speedi Driver Cleaner
Use for HOn3 to O Scale
Kadee 510 - HO Andrews (1898) Trucks w/33 Inch Ribbed Back Wheels (1 Pair)
HO Andrews (1898) Trucks w/33 Inch Ribbed Back Wheels (1 Pair)
Kadee 503 HO Arch Bar Fully Sprung Metal Trucks w/Whisker(R) Couplers - Kit Code 110 (.110inch) 33inch Ribbed-Back RP-25 Wheels 1 Pair
HO Arch Bar Fully Sprung Metal Trucks w/Whisker(R) Couplers - Kit Code 110 (.110inch) 33inch Ribbed-Back RP-25 Wheels 1 Pair
Kadee 501 HO Arch Bar Fully Sprung Metal Trucks Code 110 (.110inch) 33inch Ribbed-Back RP-25 Wheels 1 Pair
HO Arch Bar Fully Sprung Metal Trucks Code 110 (.110inch) 33inch Ribbed-Back RP-25 Wheels 1 Pair
Woodland Scenics 1446 SubTerrain System Foam Accessories Adhesives Hot Melt Foam Glue Sticks
Hot Melt Foam Glue Sticks - 10 pcs
Woodland Scenics 5052 - HO Built-&-Ready Landmark Structures - The Depot
Built-&-Ready Landmark Structures - The Depot
BLMA Models 4320 HO Modern Dual-Sided Billboard
Modern Dual-Sided Billboard - Assembled
Morning Sun Book 1571 - Algoma Central In Color by Stephen M. Timko
Algoma Central In Color by Stephen M. Timko
Pikestuff 5002 HO Modern 2-Story Office Building
Dimension: 51 X 40 Scale Feet / 7 X 5-1/2 inches.
Walthers Cornerstone 3530 - HO Trackside Structures Set - Kit
HO Trackside Structures Set - Kit
Walthers Cornerstone 3788 - HO Williams Industrial Electric Motors - Kit
HO Williams Industrial Electric Motors - Kit
Walthers Cornerstone 3239 - N Scale Sunrise Feed Mill - Kit
N Scale Sunrise Feed Mill - Kit
Walthers Cornerstone 3838 - N Scale Brick Ranch House - Kit
N Scale Brick Ranch House - Kit
Walthers SceneMaster 4105 - HO Extendible Container Chassis - Kit - 40Ft to 48Ft (2pkg)
HO Extendible Container Chassis - Kit - 40Ft to 48Ft (2pkg)
Walthers SceneMaster 1129 - Tear & Plant Grass Mat - Early Spring Meadow
Tear & Plant Meadow Mat - Early Spring Meadow
Walthers SceneMaster 1130 - Tear & Plant Grass Mat - Winter Meadow
Tear & Plant Meadow Mat - Winter Meadow
Walthers SceneMaster 1131 - Tear & Plant Grass Mat - Lowland Meadow
Tear & Plant Meadow Mat - Lowland Meadow
Walthers SceneMaster 1132 - HO Plowed Field
Tear & Plant Meadow Mat - Plowed Field
Broadway Limited Imports HO 4245 EMD SD9, BNSF #6132 Heritage Scheme, - w/Paragon3 Sound/DC/DCC
EMD SD9, BNSF #6132, Heritage Scheme, - w/Paragon3 Sound/DC/DCC
Peco SL80 - HO Code 100 Single Slip Insulfrog - New Design
HO Code 100 Single Slip Insulfrog - New Design
Woodland Scenics 1409 - SubTerrain System - Foam Risers (4in)
SubTerrain System - Foam Risers (4in)
Woodland Scenics 1223 Earth Colors Liquid Pigment(TM) - 4oz 118mL Bottle - Yellow Ocher
Yellow Ocher
Monroe Models 3115 - A.I.M Colored Weathering Powder - Soot Black (1oz)
Colored Weathering Powder - Soot Black (1oz)
Mascot Precision Tools - 771- Individual File - Half Round
Individual File - Half Round
Woodland Scenics 1122 - Tree Armatures Deciduous - 3 to 5 inches (28pk)
Tree Armatures Deciduous - 3 to 5 inches (28pk)
Monroe Models 3102 - A.I.M Colored Weathering Powder - Grimy Black (1oz)
Colored Weathering Powder - Grimy Black (1oz)
Monroe Models 3106 - A.I.M Colored Weathering Powder - Light Rust (1oz)
Colored Weathering Powder - Light Rust (1oz)
Monroe Models 3108 - A.I.M Colored Weathering Powder - Medium Rust (1oz)
Colored Weathering Powder - Medium Rust (1oz)
Monroe Models 3110 - A.I.M Colored Weathering Powder - Medium Gray (1oz)
Colored Weathering Powder - Medium Gray (1oz)
Monroe Models 3114 - A.I.M. Colored Weathering Powder - Dirty White (1oz)
Colored Weathering Powder - Dirty White (1oz)
Monroe Models 3109 - A.I.M Colored Weathering Powder - New Fresh Rust (1oz)
Colored Weathering Powder - New Fresh Rust
Kato Unitrack 20-184 - N Scale Concrete Double-Track Super-Elevated Curve Easement - 22.5 Degrees - 11/12-3/8 Inch Radius
N Scale Concrete Double-Track Super-Elevated Curve Easement - 22.5 Degrees - 11/12-3/8 Inch Radius
Atlas Model RailRoad 840 - HO Snap-Track Terminal Sections, Nickel-Silver Rail - 9inch Straight, Black Ties
HO Snap-Track Terminal Sections, Nickel-Silver Rail - 9inch Straight, Black Ties
Atlas 172 - HO Code 100 Custom-Line(R) Crossing - 25-Degree
HO Code 100 Custom-Line(R) Crossing - 25-Degree
Woodland Scenics 1258 - HO Retaining Wall - Concrete (3pcs)
HO Retaining Wall - Concrete (3pcs)
Walthers SceneMaster 4389 - Traffic Light Controller
Traffic Light Controller
Rix Products 504 - HO 43ft Water/Oil Tank w/Peaked Top - Kit
HO 43ft Water/Oil Tank w/Peaked Top - Kit
Woodland Scenics 1410 - SubTerrain System - 2% Incline/Decline Set
SubTerrain System - 2% Incline/Decline Set
Woodland Scenics 1408 - SubTerrain System - Foam Risers (2in)
SubTerrain System - Foam Risers (2in)
Woodland Scenics 1407 - SubTerrain System - Foam Risers (1in)
SubTerrain System - Foam Risers (1in)
Woodland Scenics 1414 - SubTerrain System - Foam Risers (3/4in)
SubTerrain System - Foam Risers (3/4in)
Woodland Scenics 1415 - SubTerrain System - 3% Incline Starter Set
SubTerrain System - 3% Incline Starter Set
Woodland Scenics 1412 - SubTerrain System - 2% Incline Starter Set
SubTerrain System - 2% Incline Starter Set
Walthers SceneMaster 4361 - HO Traffic Light - Double Sided
HO Traffic Light - Double Sided
Walthers 4360 HO SceneMaster Traffic Light - Single Sided
Traffic Light - Single Sided
Walthers SceneMaster 4332 - HO Post-1960s Cantilever Grade Crossing Signal - Single-Lane
HO Post-1960s Cantilever Grade Crossing Signal - Single-Lane
Walthers SceneMaster 4331 - HO Modern Cantilever Grade Crossing Signal - Single Lane
HO Modern Cantilever Grade Crossing Signal - Single Lane
Walthers 4363 HO SceneMaster Traffic Light Four-Way Hanging
Traffic Light Four-Way Hanging
Woodland Scenics 1516 Ready-Made Realistic Trees - Deciduous - 6 to 7inch 15.2 to 17.8cm pkg(2) - Medium Green
Ready-Made Realistic Trees - Deciduous - 6 to 7inch 15.2 to 17.8cm pkg(2) - Medium Green
Peco 9 HO PL-9 Mounting Plates For PL-10 Series Turnout Motors - pkg(5)
PL-9 Mounting Plates pkg(5)
Walthers 3484 HO Cornerstone Vintage Dairy Queen
Vintage Dairy Queen ho scale
Custom Finishing Models 230 High-Hood Mount Bell - Hood Mount
High-Hood Mount Bell - Hood Mount
Woodland Scenics 5717 All Scale Tidy Wire - Kit - Just Plug Lighting System
Tidy Wire Kit - Just Plug Lighting System
Athearn 97495 HO BerthGon with Coal Load ConRail CR #503326
ConRail CR #503326
Pikestuff 5007 HO Atkinson Engine Facility
Dimension: 5-1/2 X 11 inches and stands 3-3/8 inches tall.
Digitrax DN136PS - 1 Amp N/HO Scale Mobile Decoder with Short 8 pin Harness
1 Amp N/HO Scale Mobile Decoder with Short 8 pin Harness
Walthers 4058 HO Cornerstone Truck Dump Kit
Truck Dump Kit
Walthers Cornerstone 3786 - HO Two-Story Frame House - Kit
HO Two-Story Frame House - Kit
Woodland Scenics 5748 All Scale Nano LED pkg(2) - Just Plug Lighting System - Cool White
Cool White
Woodland Scenics 5749 All Scale Nano LED pkg(2) - Just Plug Lighting System - Orange
Orange
Atlas 56 Switch Control Box
Atlas 56 Switch Control Box
Walthers Cornerstone 3058 - HO Mountain Lumber Company Sawmill - Kit
HO Mountain Lumber Company Sawmill - Kit
Walthers Cornerstone 3485 - HO Dairy Queen Grill & Chill - Kit
HO Dairy Queen Grill & Chill - Kit
Woodland Scenics 1204 HO N Latex Rubber (Liquid)
16oz 455mL
Pikestuff 16 - HO Three Size Modern Yard Office - Kit
HO Three Size Modern Yard Office - Kit
Micro Trains 001 10 001 - N Scale Short-Shank Body-Mount Coupler - Bulk Pack Kit (10 Pair)
N Scale Short-Shank Body-Mount Coupler - Bulk Pack Kit (10 Pair)
Micro Trains 003 02 162 N Scale Freight Car Trucks 1 Pair Dalman 2-Level (Talgo Style w/Knuckle Coupler)
Dalman 2-Level (Talgo Style w/Knuckle Coupler)
Walthers SceneMaster 13801 HO Heavy-Duty Fire Dept. Ladder Truck - Assembled -Red
Heavy-Duty Fire Dept. Ladder Truck - Assembled -Red
WalthersProto 2311 HO Cushion Car Coupler Pocket - Kit
8 Packages
WalthersProto 2303 HO 36inch Wheelsets w/Plastic Axles - pkg(12)
HO 36inch Wheelsets w/Plastic Axles - pkg(12
WalthersProto 2302 - HO 36inch Wheelsets w/Metal Axles - pkg(12)
HO 36inch Wheelsets w/Metal Axles - pkg(12)
Athearn G67237 HO EMD SD45-2 w/DCC & Sound, Norfolk Southern NS #1700
Norfolk Southern NS #1700 - Patch Ex Conrail
Rix Products 103 - HO Vintage 150Ft Highway Overpass Kit - with 4 Piers
HO Vintage 150Ft Highway Overpass Kit - with 4 Piers
Rix Products 102 HO Vintage Highway Overpass 50 FT. Span with Pier
Vintage Highway Overpass 50 FT. Span with Pier
Kadee 1648 Roundhead Stainless Steel Screws 0-80 x 3/8inch - 12pcs
Roundhead Stainless Steel Screws 0-80 x 3/8inch - 12pcs
Microscale 87-974 HO Railroad Decal Set - Canadian Pacific AC4400CW Diesels (1995 - 1997)-Diesel - AC4400CW - Two Flags Scheme
Canadian Pacific AC4400CW Diesels (1995 - 1997)-Diesel - AC4400CW - Two Flags Scheme
Walthers Cornerstone 3778 - HO Row House - Kit
HO Row House - Kit
A-Line 50607 HO Auto loader
Auto Rack Loading Ramp - Kit
Digitrax N Scale Decoder DN163L0A for Walthers Proto GP20 and similar locos
DN163L0A
Woodland Scenics 5743 All Scale Nano LED pkg(2) - Just Plug Lighting System - Warm White
Warm White
Athearn G61382 HO 100-Ton Truck w/Electrical Pickup (2)
100-Ton Truck w/Electrical Pickup (2)
Athearn G61383 HO 70-Ton Truck w/Electrical Pickup (2)
70-Ton Truck w/Electrical Pickup (2)
NCE 153 HO N Scale Snap-It Quad - Mk2
NCE 153 HO N Scale Snap-It Quad- Mk2
NCE 147 HO No Halt Insurance Module Small w/Attached D13NHP Decoder
Small w/Attached D13NHP Decoder
NCE 159 N Scale Decoder H15/16-44 Atlas
H15/16-44 Atlas
Woodland Scenics 5755 All Scale - Flashing Nano LED pkg(2) - Just Plug Lighting System - Red
Flashing Nano - Red
Woodland Scenics 5715 All Scale Light Diffusing Window Film - Just Plug Lighting System
Light Diffusing Window Film - Just Plug Lighting System
Woodland Scenics 5700 All Scale Light & Hub Set - Just Plug Lighting System
Light & Hub Set - Just Plug Lighting System
Woodland Scenics 5716 All Scale Light Block Kit - Just Plug Lighting System
Light Block Kit - Just Plug Lighting System
Woodland Scenics 5702 All Scale Expansion Hub - Just Plug Lighting System
5702 Expansion Hub - Just Plug Lighting System
Woodland Scenics 5725 All Scale Auxiliary Switch - Just Plug Lighting System
5725 Auxiliary Switch - Just Plug Lighting System
Woodland Scenics 5754 All Scale - Flashing Nano LED pkg(2) - Just Plug Lighting System - Yellow
Flashing Nano - Yellow
Woodland Scenics 5738 All Scale Stick-On LED pkg(2) - Just Plug Lighting System - Blue
Blue
Woodland Scenics 5736 All Scale Stick-On LED pkg(2) - Just Plug Lighting System - Orange
Orange
Woodland Scenics 5737 All Scale Stick-On LED pkg(2) - Just Plug Lighting System - Green
Green
Woodland Scenics 5739 All Scale Stick-On LED pkg(2) - Just Plug Lighting System - Red
Red
Digitrax DH126P - 1.5 Amp Economy Decoder with Digitrax Easy Connect 9 Pin to DCC Medium Plug - 3.0 inch harness
DH126P - 1.5 Amp Economy Decoder with Digitrax Easy Connect 9 Pin to DCC Medium Plug - 3.0 inch harness
Woodland Scenics 1289 - Gravel - Buff Coarse
Gravel - Buff Coarse
Walthers SceneMaster 8251 - HO 40ft Hi-Cube Corrugated Side Container - APL
HO 40ft Hi-Cube Corrugated Side Container - APL
Walthers SceneMaster 8206 - HO 40ft Hi-Cube Corrugated Container - CP Ships
HO 40ft Hi-Cube Corrugated Container w/Flat Roof - CP Ships
Peco LK56 - HO North American-Style Code 100 Inspection Pit
North American-Style Code 100 Inspection Pit
Walthers Cornerstone 4052 - HO Metro Power & Light - Kit
HO Metro Power & Light - Kit
Rix Products HO 123 Wrought Iron Highway Overpass w/Adjustable Piers - Kit - 150ft Scale w/4 Piers
Kit - 150ft Scale w/4 Piers
Woodland Scenics 5701 All Scale Light Hub Only - Just Plug Lighting System
5701 Light Hub Only - Just Plug Lighting System
Woodland Scenics 5741 All Scale Stick-On LED pkg(2) - Just Plug Lighting System - Cool White
Cool White
Woodland Scenics 5760 All Scale Connecting Cables - Just Plug Lighting System 48inch 121.9cm pkg(2)
All Scale Connecting Cables - Just Plug Lighting System 48inch 121.9cm pkg(2)
SoundTraxx 810115 - Oval Speaker - 35 X 20mm
Oval Speaker - 35 X 20mm
Woodland Scenics 5770 All Scale Power Supply - Just Plug Lighting System Output: 24V AC 1000mA
Output: 24V AC 1000mA
Rix Products 708 - N Scale Guthrie Grain Set - Kit
N Scale Guthrie Grain Set - Kit
Peco Code 83 SL 8377 Streamline #7 Insulfrog Turnout - Nickel Silver Left Hand Curved HO Scale Track
Peco Code 83 SL 8377 Streamline #7 Insulfrog Turnout - Nickel Silver Left Hand Curved HO Scale Track
Peco Code 83 SL 8376 Streamline #7 Insulfrog Turnout - Nickel Silver Right Hand Curved HO Scale Track
Peco Code 83 SL 8376 Streamline #7 Insulfrog Turnout - Nickel Silver Right Hand Curved HO Scale Track
Woodland Scenics 1277 - Talus - Extra Coarse Brown (21.6 in3)
Talus - Extra Coarse Brown (21.6 in3)
Faller Gmbh 130487 - HO Tank Farm Piping & Filling Plant - Kit
HO Tank Farm Piping & Filling Plant - Kit
Faller Gmbh 130485 - HO Aral Oil Tank Farm - Kit
HO Aral Oil Tank Farm - Kit
Athearn Genesis G68817 HO SD70ACe, w/DCC & Sound, EMD/Blue #1204
EMD/Blue #1204
Walthers SceneMaster HO 11752 International(R) 4300 Utility Truck w/Bucket Lift - Assembled- Yellow
Yellow
Woodland Scenics 1951 Scenic Accents - Music to My Ears
Music to My Ears
Atlas Model Railroad HO 20003005 CIMC 53Ft Cargo Container 3-Pack - Master Line Marten Set #2
HO scale CIMC 53Ft Cargo Container Marten Set #2
Atlas Model Railroad HO 20002995 Jindo 53 Ft Cargo Container 3-Pack - Master Line - CSX Intermodal (CSXU) Set #3
CSX Intermodal (CSXU) Set #3
Rix Products 112 - HO Modern 50Ft Highway Overpass - with Pier
HO Modern 50Ft Highway Overpass - with Pier
Rix Products 200 - HO Rural Timber Overpass - Kit
HO Rural Timber Overpass - Kit
Rix Products 111 - HO Modern 50Ft Highway Overpass
HO Modern 50Ft Highway Overpass
Rix Products 505 HO 60 Ft Peaked Top Water/Oil Tank
60 Ft Water/Oil tank peaked top kit
Pikestuff 5 - HO Yard Utility Building - Kit
HO Yard Utility Building - Kit
Pikestuff 17 - HO Versatile Modular Loading Docks - Kit
HO Versatile Modular Loading Docks - Kit
Kit pkg(2)
Part of the Cornerstone Modern Industrial Park series - read more here!
Essential detail found outside modern businesses, homes & industries
Great value builds 90 items including:
6 kinds of transformer cabinets (industrial to residential sizes)
Phone boxes
Electrical cabinets with meters
Residential electric meters
Gas meters with optional mounting brackets
Kit - Part of the Cornerstone Modern Industrial Park series
Modernize any industry in minutes - great for kitbashing & customizing!
Includes correct size doors & weather bellows/seals for four truck docks two drve-through & two railcar loading dock doors
Molded in two colors - matches parts in Tip-up concrete structure kits
HO E-Z Riders with Ball Bearing Rollers (HO/On30 Scale
4 per pack
designed for use with HO and On30 locomotive drivers (can also be used for non-drive wheels)
full electrical pickup
perfect for workbench testing
work with 6 axles loco too
PX108-6F HO Power Xtender
Digitrax TL1 - Single DCC Function Decoder with Integrated Transponding
Your TL1 can be used as:
1. Function only DCC decoder with transponding
2. Digitrax Transponder
3. Function only DCC decoder without transponding.
Single 125mA (250mA peak) function output for lights or other functions
Function can be turned on/off using F0, F1, F2, F3, or F4
Supports both 2 digit and 4 digit addressing
Programmable from DCC compatible equipment
Configurable Strobe feature lets you simulate flashing lights like FRED, Strobes, Mars Lights, etc.
Compatible with Digitrax DCC Transponding Systems
Approximate size: 0.461 x 0.31 x 0.161 inches (11.7mm x 7.8mm x 4.1mm
HO/OO - Metal Lamp Post (3/pkg)
Add distinctive detail to your layout!
Use to light city streets, sidewalks, downtown areas, parks, bridges and more.
20mA set
HO scale dimensions - 0.875 w x 4in h (22.2 mm w x 101.6 mm h)
Twin Lamp Post - 3 sets
Use to light street corners, sidewalks, parks, rail yards and more. 20mA/set RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 0.484 in w x 2.76 in h (12.3 mm w x 70.1 mm h)
65 HO Switch Machine - Under Table (Right or Left)
Straight Sections pkg(10)
Modeling streets and roads is a quick and easy job with this complete system of detailed plastic parts. Each installs like sectional track; simply glue sections together and add sidewalks, curbs and other details. Easily painted and weathered to fit your era.
Straight Sections pkg(10)
Modeling streets and roads is a quick and easy job with this complete system of detailed plastic parts. Each installs like sectional track; simply glue sections together and add sidewalks, curbs and other details. Easily painted and weathered to fit your era.
Assembled
The Woodland Scenics(R) Grillin & Chillin Trailer features a large front deck with an awning, trashcan, a TV antenna for entertainment on rainy days and a window air conditioning unit for beating the summer heat. This Built-&-Ready Landmark Structure comes with a printed interior and two LED lights. The installed LED lighting is designed for use with the Just Plug(R) Lighting System. 50mA current draw.
Assembled
The Woodland Scenics(R) Grillin & Chillin Trailer features a large front deck with an awning, trashcan, a TV antenna for entertainment on rainy days and a window air conditioning unit for beating the summer heat. This Built-&-Ready Landmark Structure comes with a printed interior and two LED lights. The installed LED lighting is designed for use with the Just Plug(R) Lighting System. 50mA current draw.
NCE 229 Six pack of 1 Amp replacement lamps for CP6
RC Filter (Snubber)
Features
Use with any DCC system to prevent large voltage spikes.
Reduces or eliminates voltage spikes on long runs of DCC bus wire
Protects decoders from damaging inductive voltage spikes
Solve temporary loss of control or runaway problems
Preserves DCC waveform accuracy
you experience the following?
1) loss of train control but not running away.
2) Runaway engines (Take off)
3) Loss of decoder programming.
4) Decoders blowing up.
5) Any combination of above.
Then you should consider installing RC filters on the track.
WHERE DO I INSTALL THE RC FILTERS?
Put the very first one on a given track bus at the FAR end of long track bus run.
Repeat for every track bus you have. Why at the FAR end? The booster already has some RC filtering capability built in which covers the starting point of the track bus. The RC filter you install will provide the same capability at the opposite FAR end. Together they work on filtering the middle of the track bus. A divide and conquer approach to the problem that has it roots in engineering principles
HO Scale Branchline 3 32 2mm Thick 1-9 16 Top Width 1-7 8 Base Width 25 Roll
HO Scale Noise Killer Foam Roadbed Mainline 18 3.5mm Thick 1 1/2 inches Top-Width 1 7/8 inches Base Width 25 Ft Roll
Remote Tortoise Mount
Mounting bracket and special linkage allow you to mount the Tortoise(tm) above or below the benchwork and up to 18inch from the turnout. Suitable for all scales and brands of turnouts
Freight Loads - 146 parts
Turn empty loading docks into detailed scenes in minutes with the Walthers Scene Master Freight Loads. Perfect as loads for road or rail equipment, you can use these parts to detail stations, freight houses, many businesses and all types of industries. A great value with 146 parts molded in two colors, the set comes with large and small wooden crates, hand truck, sacks, machinery and barrels
N/HO Scale 1 Amp Mobile Decoder
Digitrax Easy Connect 8 Pin Plug to 8 pin DCC medium plug Motor & Function Decoder that fits many N and HO Scale Locos!
- Size: 0.87 x 0.4 x 0.2 inch (22.16mm x 10.28mm x 5.1mm)
- N Scale
- 1.0 Amp/1.5 Amps Peak
- 6 FX3 Functions, 0.5 Amp
- Digitrax Easy Connect 8 Pin Plug to 8 pin DCC medium plug
- Works with PX112-6F Power Xtender
- FX3 Function outputs for prototypical lighting effects and on/off control:
- Constant Brightness Lighting with directional or independent control.
- Optimized selectable LED or incandescent lamp operation
- Realistic Effects like Ditch lights, Mars lights, strobes, and many more
- Configurable Pulse Function available on all function outputs.
- FX3 & Standard Function Qualifiers operate functions based on direction,
- F0 on or off, direction and F0, and whether loco is moving.
- Function Mapping for custom function setup.
- Master Light Switch turns off all lights & functions with one keystroke.
- Advanced Consist Function Controls.
- Digitrax LocoMotion® System-Your locomotives look like the real thing.
- The Digitrax LocoMotion System makes them run like the real thing, too!
- Scaleable Speed Stabilization (Back EMF) with simple setup & 256 level resolution.
- Torque Compensation.
- 128 Speed Step operation (14 or 28 steps can also be used).
- Momentum with acceleration and deceleration.
- Normal Direction of Travel is user selectable.
- Switching Speed feature for easier and faster access to yard speeds.
- 3 Step Speed Tables set start, mid and max voltage for custom control.
- 28 Step Speed Tables with 256 level resolution for precise control.
- Digitrax Easy Connect 8 Pin Plug to 8 pin DCC medium plug.
- Works with PX112-6F Power Xtender.
- Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.
- 2 Digit and 4 Digit Addressing.
- Basic, Advanced & Universal Consisting.
- SuperSonic motor drive for silent operation.
- Direct mode programming.
- Decoder Reset CV with or without speed table reset.
- Transponder Equipped ready for transponding on your Layout.
- Motor Isolation Protection helps prevent damage to your decoder.
- Automatic Analog Mode Conversion when running on DC layout.
- Decoder Lock for individual programming of multiple decoders in one loco.
DCC 4 Block Occupancy Detector
-Low-cost, High-sensitivity DCC block-occupancy detection.
-Adjustable resistance/current detection section (DS) trip threshold.
-8A capacity, suitable for all scales and track wiring configurations.
-Noise resistant and compatible with BDL168 sections.
-On-board status LEDs for stand-alone occupancy and track power indication, expandable for optional LT5 or fascia mounted occupancy indicator LEDs.
-Plug and Play connections to simplify setup. Can cascade Booster wires.
-Isolated Occupancy output signal lines can drive most common signal system or control interfaces.
-Compatible with DS64 and SE8 modules for signaling, control and reporting occupancy onto LocoNet.
-Replaces the BD4.
All Scale BD20 - Block Detector Module
The BD-20 block detector module is normally used to indicate the presence of a locomotive, caboose or other rolling stock in a track section by sensing electrical current drawn by that rolling stock. Locomotives will naturally trigger the detector because they draw current through their DCC decoder. Unpowered rolling stock will not trigger the detector unless equipped with some means of drawing current from the rails such as lights or resistor wheel sets.
The BD20 needs to be as close to the section being detected as possible to avoid false detection triggered by long runs of cable. For the BD20 to work correctly ALL feeders for the section being detected must go thru the BD20. The best practice is to have one BD20 per feeder, and only one feeder per section of track. That section should be isolated from all other sections by using gaps or insulating rail joiners.
The BD20 acts like a normally open switch that gets triggered by sensing current going thru the coil. In a typical application you connect the outputs of the BD20 to something (Logic + 5 to 12vdc) that will react to a ground short. we use it to trigger the inputs of the AIU. Most signal systems work the same way.
The BD20 is a detection device and cannot drive a signal directly unless you want to use the external LED connection in some fashion. An AIU is an input device that detects a 5v line being shorted to ground, such as the output of a BD20. The AIU then puts this information on the NCE Cab Bus. Neither device (BD20 or AIU) are directly related to signaling. They do detection and notification.
Modern Guard Shack - Kit
Protect modern industrial parks, railroad facilities, military installations & large industries
Guard Shack, Chain Link Fence & Entry Gatehouse kits included
Complete set of add-on security details with:
Sliding entry gate kit
12 Security cameras
2 Talk-back speakers
6 Spotlights (nonoperating)
2 Traffic lights
4 Post-mounted call boxes
8 Outside building lights (nonoperating)
12 Protection posts
4 Wall-mounted keypad entry units
2 Window air conditioners
12 Hanging dome cameras
12 4 Ft (1.2m) Speed bumps
9 6 Ft (1.8m) Speed bumps
Guard Shack: 4-1/8 x 3 x 1-1/2 inches, 10.4 x 7.6 x 3.8cm Entry Gatehouse: 1-5/8 x 1-1/4 x 1-1/8 inches, 4.1 x 3.1 x 2.8cm
HO Laser-Cut 2-Lane Curved Wood Grade Crossing - 29-31in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
HO Laser-Cut 2-Lane Curved Wood Grade Crossing - 23-25in Radius (2)
These crossings are prototypically correct with a straight board arrangement. Each set includes two complete crossings, with laser etched boards & nail holes. Ready to paint or stain and install on your highway and road crossings. These crossings will fit curves with a radius as shown. Also included are plastic shims to fit different rail heights.
Length - 1/4 inches - colour -Black
Length - 1/2 inches - colour -Black
Athearn Blue Box cars, coupler box, locomotives
Length - 7/16 inches - colour -Black
Athearn Blue Box cars, coupler box, locomotives
Length - 5/16 inches - colour -Black
Athearn Blue Box cars, coupler box, locomotives
Length - 1/8 inches - colour -Black
Athearn Blue Box cars, coupler box, locomotives
Length - 3/16 inches - colour -Black
Athearn Blue Box cars, coupler box, locomotives
Length - 1/4 inches - colour -Black
Athearn Blue Box cars, coupler box, locomotives
Length - 3/8 inches - colour -Black
Athearn Blue Box cars, coupler box, locomotives
LocoNet Occupancy Detector - 8 Detection Sections with Transponding and Power Management
BXP88 makes adding detection and transponding to your layout easier than ever. No more complicated wiring!
- DCC Occupancy Detection supports up to 8 Detection Sections letting you know when equipped rolling stock is in a detection section on your layout.
- One Transponding Zone per Detection Section lets you know the location of transponder-equipped locos or rolling stock.
- Intelligent Automatic short-circuit and over-current power management for each Detection Section, improves reliability by avoiding most booster fault shutdowns.
- Connects to LocoNet to transmit Detection Section occupancy, Transponding and track power information.
- Detects any powered locomotives in a Detection Section.
- Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
- Detects rolling stock equipped with resistor wheel sets.
- Plug and Play with Digitrax DCC systems with automatic Railsync polarity detection.
- LED output headers for front panel indication of Detection Section occupancy, Transponding, and power status.
- Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles.
- 3 Amp capacity per Detection Section, 8 Amp total unit capacity.
- Automatically updates status at track power on.
- Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track.
- Firmware update capability via IPL over LocoNet.
HO Truck & Rail Scale - Kit
FEATURES:
- Must-have for industries shipping or receiving bulk materials by road and/or rail
- Two below ground weigh in motion track scales (non-operating)
- Two detailed truck scales and signs
- Large and small scale houses with separate doors and windows plus nonworking traffic light, streetlight and spotlights
MEASUREMENTS:
Large Truck Scale: 14-1/16 x 2-15/16 x 3 inches w/Sign
Small Truck Scale: 9-1/4 x 2-1/8 inches
Track Scales each: 4-1/8 x 1-5/8 inches
Large Scale House: 1-15/16 x 1-1/4 inches
Small Scale House: 1 x 1-1/8 inches
HO Rerailer Track - 4-7/8 Inches (2pk)
Kit - 4 Each of 2 Styles
Part of the Cornerstone Modern Industrial Park series - read more here!
Typical of large capacity air conditioners and air handling units used on many industries, businesses & public buildings
Perfect for modeling roof- or ground-mounted equipment
Two complete spruces with parts for eight units (four each of two styles)
Cyclones & Vents for Industrial Buildings - 10 pcs
Cyclones - 2 pcs.
Vents - 8 pcs.
Swivel base allows the vents to remain plum when mounted on a peak roof. This set includes the large cyclone type dust collectors that are mounted on the roofs and walls of many manufacturing plants, along with the vents found in kit #610.
Low Temp Foam Glue Gun
The Glue Gun, with Low Temp Foam Glue Sticks, operates at a temperature that will not damage foam and it bonds instantly. Bonds to foam, plastic, wood, paper and many other craft materials. Two glue sticks are included. 120v - 40Watt - 300mA
Use only Woodland Scenics Low Temp Foam Glue Sticks (ST1446)
Sisters of Mercy Thrift Store - Kit
Foot print 6 X 4 inches -15 X 10cm
What skid row would be complete without a second hand store? This kit features a rooftop water tank and funky cracked stucco. Included are detailed hydrocal castings, full-color signs, laser-cut doors and windows and complete easy-to-understand assembling, painting and aging instructions.
Cast Hydrocal plaster walls, plastic door & windows and full color paper signs and awnings. Perfect for your business district from the cracked stucco to the rusty tin staircase, this building is just brimming with character. This kit features detailed Hydrocal castings, plastic doors and complete, easy-to-understand directions.
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
123mm (4 7/8 inches) Uncoupling track [2 pcs] - S123U
Genesis Motor Retrofit Kit for RTR SD45/SD40 with Included extended Dog-Bone universal - 2pcs.
Features
Used with the DCC-Sound Ready underframe only. Earlier models that do not have the Sound Ready starburst on the box will be able to obtain the underframe (ATH98542) separately.
Simple Installation
Molded on motor saddle mounts
Included extended Dog-Bone universal
Included mounting screws
Balanced Flywheels
DCC Ready- NMRA 8 pin and Decoder Harness plugs
Pre-soldered motor wire leads
- For Models produced after 8/2013
Overview
Three benefits to Genesis power to your RTR Locomotives:
Streamlined DCC speed curves
Lower motor current draw
Quieter motor operation for DCC Sound
Note - only 2 Included extended Dog-Bone universal - not 6 as pictured
ALCO Steam Generator Intake Vents (Brass Castings; pkg(2)
Custom Gas Station Junk Pile & Hazardous Material Barrel - Set 1
Painted and labeled as shown
Digitrax PS615 - 90W AC/DC 15VDC 6 Amp Power Supply
PS615 90W AC/DC 15VDC 6 amp power supply for use with all Digitrax Command Stations and Boosters operating at 5 amps.
High-efficiency power supply
15 VDC output
Accepts different cord sets
Meets MEPS VI and DOE VI efficiency standards
CE for EM compatibility and IEC 60950, UL, and FCC safety requirements
Full galvanic isolation of output voltage from AC input
RoHS environmentally sensitive manufacturing
Compact and lightweight
Power indicator light
For Use With - Evolution Starter Set
Over current and overload protected
SceneMaster - Static Grass Flocking - Yellow 1/16inch 1.5mm Fibers
Model more realistic grass in minutes in any scale
Great for lawns, farm fields, railroad and highway right-of-way and more
Six realistic colors - made exclusively for Walthers by Noch
Easily applied with Noch Static Grass Applicators, Grass Dispenser Bottle or Gras-Master 2.0 (each sold separately)
3-1/2 Ounce 100g reclosable plastic bags
Static Grass Flocking - Green - 3/32inch 2.5mm Fibers
Model more realistic grass in minutes in any scale
Great for lawns, farm fields, railroad and highway right-of-way and more
Six realistic colors - made exclusively for Walthers by Noch
Easily applied with Noch Static Grass Applicators, Grass Dispenser Bottle or Gras-Master 2.0 (each sold separately)
3-1/2 Ounce 100g reclosable plastic bags
SceneMaster - Static Grass Flocking - Dark Green 1/16inch 1.5mm Fibers
Model more realistic grass in minutes in any scale
Great for lawns, farm fields, railroad and highway right-of-way and more
Six realistic colors - made exclusively for Walthers by Noch
Easily applied with Noch Static Grass Applicators, Grass Dispenser Bottle or Gras-Master 2.0 (each sold separately)
3-1/2 Ounce 100g reclosable plastic bags
Brown 1/16inch 1.5mm Fibers, 3-1/2oz 100g
Model more realistic grass in minutes in any scale
Great for lawns, farm fields, railroad and highway right-of-way and more
Six realistic colors - made exclusively for Walthers by Noch
Easily applied with Noch Static Grass Applicators, Grass Dispenser Bottle or Gras-Master 2.0 (each sold separately)
3-1/2 Ounce 100g reclosable plastic bags
Green Blend 1/16inch 1.5mm Fibers, 3-1/2oz 100g
Model more realistic grass in minutes in any scale
Great for lawns, farm fields, railroad and highway right-of-way and more
Six realistic colors - made exclusively for Walthers by Noch
Easily applied with Noch Static Grass Applicators, Grass Dispenser Bottle or Gras-Master 2.0 (each sold separately)
3-1/2 Ounce 100g reclosable plastic bags
Static Grass Flocking - Dark Green - 3/32inch 2.5mm Fibers
Model more realistic grass in minutes in any scale
Great for lawns, farm fields, railroad and highway right-of-way and more
Six realistic colors - made exclusively for Walthers by Noch
Easily applied with Noch Static Grass Applicators, Grass Dispenser Bottle or Gras-Master 2.0 (each sold separately)
3-1/2 Ounce 100g reclosable plastic bags
St L& H (St Lawrence and Hudson) #5593 - ESU LokSound & DCC - Just Arrived
81inch Nose, Chicken Wire Radiator Grill Covers, Double Row of Louvred Doors in Compressor Area, Ditch Lights, Removed Class Lights
GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, DC versions have 21 pin DCC socket, Flywheels, Can motor, 40inch wheels, RP25 flange, KD couplers.
St L& H (St Lawrence and Hudson) #5690 - ESU LokSound & DCC - Just Arrived
102inch Nose, Class Lights Removed, Chicken Wire Radiator Grill Covers, Ditch Lights
GMD Steps, Air Hoses, MU Hoses, Cab interior, Metal grab irons, Brass bell and bracket, Brass horn, Drop Steps, Window Glass, Wind Shield wipers, DC versions have 21 pin DCC socket, Flywheels, Can motor, 40 wheels, RP25 flange, KD couplers.
HO Whisker Scale Metal Couplers w/Gearboxes - Long (25/64in) Centerset Shank (2pair)
The #156 Scale All Metal Self-Centering WHISKER Coupler features a Scale Metal Coupler (a smaller head coupler which is more to scale and is patterned after the type E couplers) & Metal WHISKER Centering Spring, insulated Draft Gear Box and Lid. The #156 Coupler may be mounted with the supplied #242 draft gear box, other Kadee HO-Scale draft gear box shown below or with the Manufacturers cast-on coupler pockets. The coupler will couple and uncouple with other Kadee HO and HOn3 couplers. The coupler has the same shank length as the #26, 36 or 46 coupler which will allow the modeler to remove the existing #26, 36 or 46 coupler and replace with the new smaller coupler. The #156 coupler is made of the same metal as the #46 for strength and rigidity.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. Use the provided insulated gearbox.
Package Includes:
(2) Pair #156 Scale Whisker Metal Couplers - Long Centerset Shank
(2) Pair #242 Snap-Together Gearboxes
(2) #625 Knuckle Springs
HO Caged Ladders & Vents (5 Each) - Kit
Product Information
Add detail to your factory buildings with Walthers Cornerstone HO Scale Caged Ladders and Vents. On real structures, caged safety ladders are required for any ladder access over 10Ft 3m tall and can be found on virtually any American industrial building. A great way to modernize older buildings or detail contemporary structures, the set includes five complete ladder and cage assemblies. Plus, you get five wall-mounted vents that can also be fitted on the outside of almost any building.
Easy way to update old or modern industries
Five caged ladders
Five wall-mounted vents with ductwork and blowers
Molded in appropriate base color
Scene Master Hi Cube Refrigerator Container Evergreen
Prototypes in domestic service 1986 to late 2000s
Perfect load for new Walthers Proto Gunderson As-Built All-Purpose 48 Foot Well Cars (sold separately)
Based on common size and style
Improved door latch detail
Realistic loads for any well car
HO Cornerstone Aggregate Bins - Kit - colour Grey
Kit - 4-7/8 x 2-7/16 x 6-1/8inch 12.3 x 6.1 x 15.5cm
Bulk loader speeds operations at all types of industries
Used for sand, gravel, coal, woodchips and more
Perfect for railcar and or truck loading
Simulated metal construction
Molded in light gray
Overhead clearance below bin 2-3/16 inches 5.5cm
Cornerstone Security Details
Part of the Cornerstone Modern Industrial Park series -more details on Walthers website
Quick and easy update for todays industrial areas
Detail and modernize any existing structure in minutes
Great value with 86 items including:
Sliding entry gate (kit)
12 Security cameras
2 Talkback speakers
6 Spotlights (non operating)
2 Traffic lights
4 Post-mounted call boxes
8 Outside building lights (non operating)
12 Protection posts
4 Wall-mounted keypad entry units
2 Window air conditioners
12 Hanging dome cameras
Twelve 4 inch (1.2m) speed bumps
Nine 6 inch (1.8m) speed bumps
Modern Cold Storage Warehouse
Part of the Cornerstone Modern Industrial Park series -more details on Walthers website
Fits layouts from the 1970s to the present
Easy way to model tip-up concrete panel construction used for all types of trackside warehousing, light and heavy manufacturing plants, strip malls, schools, hotels, offices, apartments and more across North America
Can be built in multiple configurations
Includes alternate doors and windows
Correct height truck and railcar loading docks with weather bellows and or seals
Customize in minutes with molded cut lines, expand with additional kits or build bigger with add-on accessories available separately
Great trackside customer by itself or serving a larger industry
Correct height truck and railcar loading docks with weather bellows and or seals
Industrial electric meters and junction box
Four roof-mounted air conditioners
Modern square security lights - upgrade to working models with Modern Wall Light 3-Pack (#949-4318 sold separately)
Separate doors, windows, entry ramp and stairway
Molded in 5 colors and clear plastic
Main building: 20-1/2 x 9-1/8 x 5-1/4 inches 52 x 23.1 x 13.3cm Cooling Towers: 3-5/16 x 1-13/16 x 3-1/4 inches 8.4 x 4.6 x 8.2cm- Overall height with piping, 4-5/8 inches 11.7cm
Tree Armatures - Pine - 4-6 inches (44pk)
Bend and twist Tree Armature into a realistic shape. Apply Hob-e-Tac to the branches. Let dry clear and use a variety of the of the following foliage materials to make all types of trees for our layout: Underbrush, Bushes, Clump-Foliage, Foliage Clusters, Lichen, Foliage, Fine-Leaf Foliage, and Poly Fiber.
Tree Armatures - Pine - 2-1/2 - 4 inches (70pk)
Bend and twist Tree Armature into a realistic shape. Apply Hob-e-Tac to the branches. Let dry clear and use a variety of the of the following foliage materials to make all types of trees for our layout: Underbrush, Bushes, Clump-Foliage, Foliage Clusters, Lichen, Foliage, Fine-Leaf Foliage, and Poly Fiber.
Tree Armatures - Deciduous - 5-7 inches (12pk)
Bend and twist Tree Armature into a realistic shape. Apply Hob-e-Tac to the branches. Let dry clear and use a variety of the of the following foliage materials to make all types of trees for our layout: Underbrush, Bushes, Clump-Foliage, Foliage Clusters, Lichen, Foliage, Fine-Leaf Foliage, and Poly Fiber.
HO Diesel Data - EMD SD70 Series (1988+) - Decals
People Working - Crane Operators pkg(6)
CSX #4679
DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
These SD70Ms previously wore the EMD demonstrator scheme of burgundy with a black underframe. When they were acquired by CSX, they ran for several years before being repainted in the then-current YN2 - Bright Future - scheme, which they are depicted with here. In addition, several of the units received special names adorning the sides of the nose-all were significant places in Florida, where the SD70Ms worked frequently.
Features
Fully-assembled and ready-to-run
Front/rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Operating ditch lights
MU receptacles and cables per prototype
Pilot face spare knuckles and brackets per prototype
Early or late anticlimbers
3 or 4 step walkways
AEI tags mounted on the frame or jacking pads per prototype
Safety tread on the walkways
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Anti-glare panel painted on the nose
Windshield wipers
Tinted or clear cab windows per prototype
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Standard or Freight-style brake wheel
See-through radiator fans
Lift rings
Factory installed wire grab irons
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Dual sanding lines
Rear pilot drop grab iron (MU hose retainer) pre prototype
DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Incandescent bulbs for realistic appearance
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18 inches
Recommended radius: 22 inches
GATX Rail Locomotive Group & Marquette Lease Diesels & Marquette Cabooses.
First Union Rail (FURX) - Leasing Diesels
HO Scale G63454 Prime Air Conditioner Set (6)
Water Tint - Yellow Silt
Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Tints can be added to Deep Pour Water, Surface Water, and Realistic Water to model any aquatic ecosystem. Water Tints are great for any scene, from translucent to opaque waters, and everything in between. Create customized colors by mixing Water Tints and White Water Highlights together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Water Tint - Olive Drab
Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Tints can be added to Deep Pour Water, Surface Water, and Realistic Water to model any aquatic ecosystem. Water Tints are great for any scene, from translucent to opaque waters, and everything in between. Create customized colors by mixing Water Tints and White Water Highlights together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Water Tint - Sage Green
Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Tints can be added to Deep Pour Water, Surface Water, and Realistic Water to model any aquatic ecosystem. Water Tints are great for any scene, from translucent to opaque waters, and everything in between. Create customized colors by mixing Water Tints and White Water Highlights together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Water Tint - Moss Green
Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Tints can be added to Deep Pour Water, Surface Water, and Realistic Water to model any aquatic ecosystem. Water Tints are great for any scene, from translucent to opaque waters, and everything in between. Create customized colors by mixing Water Tints and White Water Highlights together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Water Tint - Murky
Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Tints can be added to Deep Pour Water, Surface Water, and Realistic Water to model any aquatic ecosystem. Water Tints are great for any scene, from translucent to opaque waters, and everything in between. Create customized colors by mixing Water Tints and White Water Highlights together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Water Tint - Turquoise
Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Tints can be added to Deep Pour Water, Surface Water, and Realistic Water to model any aquatic ecosystem. Water Tints are great for any scene, from translucent to opaque waters, and everything in between. Create customized colors by mixing Water Tints and White Water Highlights together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Water Tint - Navy Blue
Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Tints can be added to Deep Pour Water, Surface Water, and Realistic Water to model any aquatic ecosystem. Water Tints are great for any scene, from translucent to opaque waters, and everything in between. Create customized colors by mixing Water Tints and White Water Highlights together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
White Water Highlight
Add White Water Highlight to intensify water crests, rapids, and waterfalls. The look of foamy or frothy water can be created when added to Surface Water or Deep Pour Water. White Water Highlight is 100% acrylic.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Deep Pour Water - Murky
Create underwater features with Deep Pour Water and Water Undercoats for submerged water scenes or to imitate depth. Create any Murky aquatic ecosystem and add Surface Waters for the illusion of water movement and undeniable realism. Deep Pour Water dries hard and will not crack, is non-shrinking, and will not become discolored over time.
Murky Water is translucent up to 1/2 inch pours.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Navy Blue
Seal your base and add color all at once! Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Undercoat lays a base for creating dark depths to shallow shorelines, and underwater scenes for any aquatic ecosystem. Create customized colors by mixing Water Undercoat together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Deep Blue
Seal your base and add color all at once! Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Undercoat lays a base for creating dark depths to shallow shorelines, and underwater scenes for any aquatic ecosystem. Create customized colors by mixing Water Undercoat together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Hunter Green
Seal your base and add color all at once! Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Undercoat lays a base for creating dark depths to shallow shorelines, and underwater scenes for any aquatic ecosystem. Create customized colors by mixing Water Undercoat together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Yellow Silt
Seal your base and add color all at once! Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Undercoat lays a base for creating dark depths to shallow shorelines, and underwater scenes for any aquatic ecosystem. Create customized colors by mixing Water Undercoat together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Surface Water - Water Waves
Water Waves goes on clear and dries clear to create splashes, waves, and rapids. Customize your water colors by adding Water Tints or create whitecaps and frothy water with White Water Highlight.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Dust Dabber
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Olive Drab
Seal your base and add color all at once! Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Undercoat lays a base for creating dark depths to shallow shorelines, and underwater scenes for any aquatic ecosystem. Create customized colors by mixing Water Undercoat together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Moss Green
Seal your base and add color all at once! Specially formulated to represent authentic colors on the Forel-Ule Scale, Water Undercoat lays a base for creating dark depths to shallow shorelines, and underwater scenes for any aquatic ecosystem. Create customized colors by mixing Water Undercoat together.
Woodland Scenics water products are designed to work together to model any water scene such as; waterfalls, rivers, lakes and more. Watch the How-To videos to learn more about modeling water.
Safety and Security Posts pkg(20)
Prototypes increase driver awareness of obstacles
Added protection for everything from gas pumps to structure entrances
Ready to use - modernize a scene in minutes
20 posts molded in Safety Yellow
Detroit Toledo and Ironton - DT and I #9625
Key Features
•Fully assembled and ready for your layout
•Upgrades include seperately applied grab irons and stirrup steps
•33†solid nickel silver wheels with RP25 contours operate on all popular brands of track
•McHenry scale knuckle spring couplers installed
NCE 167 N Scale N14K1 Decoder
Athearn EMD F45, Athearn EMD FP45
Kato Gevo ES44AC, Kato AC4400, Kato C30-7, Kato GE C44-9W, Kato SD40-2 early versions, Kato ES44, Kato SD40, Kato SD40-2 SNOOT, Kato SD45, Kato SD70MAC ,Kato SD70
HO Dog & Kennel (Doghouse) - Kit
Fido is sure to love this SceneMaster model that makes a great detail for HO backyards and many businesses. Easy to assemble and customize, the kit is complete with dog and doghouse.
HO Benches (8 pkg)
Product Information
Heres a must-have detail from SceneMaster(TM) that will bring HO Scale station platforms, city parks, bus stops and more to life in minutes! The set includes eight benches that are ready to install anywhere along your railroad. For the finsihing touch, add some SceneMaster Figures, available separately.
Please Note: Figure shown in photo is not included.
Pallet-Jacks - Kit - pkg(4)
Detail modern loading dock scenes with this set of four easy to assemble Pallet Jacks. Kit includes parts for four jacks, which can be built with handles up or down, and illustrated step-by-step instructions.
White Cab, Silver Dump Box w/Railroad Maintenance-of-Way Logo Decals
Fully assembled & painted white - typical of todays heavy trucks operated by railroads, gas, water & power utilities, as well as city, county & state highway departments
Colorful railroad logo decals sized to fit for quick conversion to maintenance-of-way service including BNSF, CN, ATSF, BN, CP Rail, CNW(TM), NS, Chessie, DRGW(TM), MILW, KCS, CR, CSX, SOU, SP(TM) & UP(R)
Licensed replica of popular International trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled & painted
Die cast metal & plastic parts
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, they are still in production as the International Durastar.
White w/Railroad Maintenance-of-Way Logo Decals
Fully assembled & painted white - typical of todays heavy trucks operated by railroads, gas, water & power utilities, as well as city, county & state highway departments
Colorful railroad logo decals sized to fit for quick conversion to maintenance-of-way service including BNSF, CN, ATSF, BN, CP Rail, CNW(TM), NS, Chessie, DRGW(TM), MILW, KCS, CR, CSX, SOU, SP(TM) & UP(R)
Licensed replica of popular International trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled & painted
Die cast metal & plastic parts
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, they are still in production as the International Durastar.
HO 33 Inch Semi-Scale Insulated Brass Wheelsets (12/pkg)
Nickel Silver Plated Brass Insulated Wheelsets
These wheels follow NMRA RP-25 Standards.
One wheel is insulated from the all-metal axle.
The entire wheelset is non-magnetic.
The axle length is 1.006in (+- .004in)
28in wheels are used on modern Tri-Level Autoracks, some Bi-Level Autoracks, and some older intermodal cars such as Impack spine cars, front runners & four runners - check your prototype.
33in wheels are used on 50 & 70 ton capacity cars (CAPY approximately 150,000 LBS or less).
36in wheels are used on 100 ton capacity cars (CAPY approximately 200,000 LBS), and on all passenger cars no matter the era.
38in wheels are used on 150 ton capacity cars, primarily the center connection trucks on modern intermodal cars with 33in wheels at the coupler ends.
(Cabooses can use either 33in or 36in wheels depending on the prototype.)
The CAPY information is typically printed on model freight cars and can be used as a guide. Some cars have the wheel size printed on the sides or ends of the car in the data. If you are ever unsure of which size to use, you can simply replace the wheels currently on the car with the same size.
Wheel diameter can be measured with a caliper:
28in wheels measure (28/87.1=.321in) in HO scale.
33in wheels measure (33/87.1=.378in) in HO scale.
36in wheels measure (36/87.1=.413in) in HO scale.
38in wheels measure (38/87.1=.436in) in HO scale.
(87.1 = HO scale to prototype ratio. HO scale is 87.1 times smaller than the prototype).
White
Fully assembled & painted white - typical of todays heavy trucks operated by railroads, gas, water & power utilities, as well as city, county & state highway departments
Colorful railroad logo decals sized to fit for quick conversion to maintenance-of-way service including BNSF, CN, ATSF, BN, CP Rail, CNW, NS, Chessie, DRGW, MILW, KCS, CR, CSX, SOU, SP & UP
Licensed teplicas of popular International trucks
Perfect size for collectors
Positionable parts on many models
Die cast metal & plastic parts
HO International 4300 Utility Truck w/Bucket Lift - Assembled - White
Colorful railroad logo decals sized to fit for quick conversion to maintenance-of-way service including BNSF, CN, ATSF, BN, CP Rail, CNW(TM), NS, Chessie, DRGW(TM), MILW, KCS, CR, CSX, SOU, SP(TM) & UP(R)
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Position-able Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, they are still in production as the International Durastar.
HO International 4300 Utility Truck w/Drill - Assembled - White
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Position-able Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, they are still in production as the International Durastar.
Fire Hydrants - 10 pk
Must-have detail for city street scenes
Fits all popular modeling eras
10 ready to use Hydrants included
Kit - 33-1/2 x 3 x 11 inches 83.7 x 7.5 x 27.5cm
Part of the new Cornerstone Engineered Bridge System
For more information about the Cornerstone Engineered Bridge System click here
Prototypes provide maximum clearance for vessels on busy waterways
Low-speed motor & gear drive included
Add to new or existing scenery with Single-Track Railroad Bridge Concrete Abutments (#933-4551, sold separately)
Use with Walthers Code 83 Bridge Track (948-886, sold separately)
Has clearance for todays taller equipment
Authentic trusses, chords, counterweight & other details
Bridge tenders shanty & interlocking tower
Molded in two colors and clear plastic
HO 18 inches Straight Grab Irons (.008inch Formed Wire) - 20pkg
Arch Cast Iron Street Light - Just Plug(TM) - Package of 3 units
Use to light depots, rail yards, alley ways, sidings, parking lots and more. Also includes an extension pole to make the light pole taller for a broader reach. 20mA RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 1.071 in w x 3.449 in h (27.2 mm w x 87.6 mm h)
Dimensions with extension piece - 1.071 in w x 5.516 in h
(27.2 mm w x 140.1 mm h)
DCC Ready - Canadian National CN #5615
DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
All road numbers ◦SD70I body
Freight type brake wheel
K-3 horn
Isolated cab with early Pyle nose mounted headlight
Angled cab door without window
Large & small Sinclair type antennas
Waste oil retention tank
Underbody plumbing
Tab mounted AEI tags
Spare knuckles on rear pilot
CN style medium plow
Ribbed front & rear anti-climbers
Salem air filters
Large emergency fuel cut off button
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Operating ditch lights
MU receptacles and cables per prototype
Pilot face spare knuckles and brackets per prototype
Early or late anticlimbers
3 or 4 step walkways
AEI tags mounted on the frame or jacking pads per prototype
Safety tread on the walkways
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Anti-glare panel painted on the nose
Windshield wipers
Tinted or clear cab windows per prototype
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Standard or Freight-style brake wheel
See-through radiator fans
Lift rings
Factory installed wire grab irons
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Dual sanding lines
Rear pilot drop grab iron (MU hose retainer) pre prototype
DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Incandescent bulbs for realistic appearance
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Recommended radius: 22inch
DCC & Sound - Canadian National CN #5602
ROADNAME AND ROAD NUMBER SPECIFIC FEATURES:
CN FEATURES:
Representing the only SD70Is built, Canadian National ordered 26 of these locomotives in 1996. They were all delivered painted in the single stripe scheme, featuring bold orange ends and a large -CN- adorning the side of the hood. Typical of many Canadian locomotives, they have several distinctive spotting features, such as early-style Pyle headlights mounted in the nose, ribbed front and rear anticlimbers, and the CN specified fuel tank with auxiliary waste oil retention tank. Now approaching their 20th birthday, these engines are still mainline power on the CN, and can often be found working in multiple with most other types of power, including GE Dash 8 & 9s, and EMD SD40, SD60 and SD70 series.
All road numbers
SD70I body
Freight type brakewheel
K-3 horn
Isolated cab with early Pyle nose mounted headlight
Angled cab door without window
Large & small Sinclair type antennas
Waste oil retention tank
Underbody plumbing
Tab mounted AEI tags
Spare knuckles on rear pilot
CN style medium plow
Ribbed front & rear anticlimbers
Salem air filters
Large emergency fuel cutoff button
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Operating ditch lights
MU receptacles and cables per prototype
Pilot face spare knuckles and brackets per prototype
Early or late anticlimbers
3 or 4 step walkways
AEI tags mounted on the frame or jacking pads per prototype
Safety tread on the walkways
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Anti-glare panel painted on the nose
Windshield wipers
Tinted or clear cab windows per prototype
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Standard or Freight-style brake wheel
See-through radiator fans
Lift rings
Factory installed wire grab irons
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Dual sanding lines
Rear pilot drop grab iron (MU hose retainer) pre prototype
DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Incandescent bulbs for realistic appearance
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Recommended radius: 22inch
Sound equipped models also feature:
Onboard DCC decoder with SoundTraxx Tsunami sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Excellent Slow speed control
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
N Scale Prairie Co-Op Elevator - Kit
Classic small town terminal elevator
Typical of concrete elevators in use from 1915 to today
Used with all types of grain
Square design with four silos
Off-center head house
Cement block unloading shed
Cement block office with truck scale
Loading spouts for boxcars & covered hoppers
Separate dust collector, vents & sampling arm
Molded in white, light gray & clear plastic
Finished model measures:
Main Structure: 5-3/16 x 3-3/16 x 7-1/4 inches 13.1 x 8 x 18.4cm
Office/Scale House: 2-5/8 x 2-1/16 x 1-3/8 inches 6.6 x 5.2 x 3.4cm
Truck Scale: 1 x 3-1/2 inches 2.5 x 8.8cm
Yellow
One unit
White Cab, Red Body
One Unit
Red - 0ne unit
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Positionable Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
HO Trackside Post Office - Kit
FEATURES:
- Fits any North American steam or diesel-era layout from the early 1900s to the 1970s
- Perfect for just down the tracks from Union Station
- Includes loading dock and canopies
- Easy-to-build plastic kit
- Molded in appropriate colors
MEASUREMENTS:
13-1/8 x 4-1/2 x 6-3/8 inches
Canadian Pacific 36320 Stacked Block
Trucks And Couplers Micro-Trains
Body-mounted couplers
Wall-Mount Gooseneck Light - Just Plug - pkg(2)
Delivery Men w/Loads
3 Ft Sections Cork Roadbed N Scale 5 pcs
These lightweight pieces of cork roadbed are easy to use by any modeler: materials can be easily shaped and cut. Constructed with consistent thickness, each section is beveled for a realistic look. Features excellent sound absorption.
Warm White
No electrical knowledge or special tools needed, just plug and you are done. The Just Plug(TM) Lighting System is a quick and easy way to add realism and interest to new and existing layouts and other projects. Individual bulb brightness can be controlled, and the modular design allows for easy expansion. Just Plug is compatible with DCC and works for any scale.
Features
2 lights per pack
Includes 24 inches cables
Ready to plug into Light Hub (sold separately)
Adhesive-backed for simple installation
Built & Ready Landmark Structures - H&H Feed Mill
Assembled - 7-5/32 x 6-3/8 x 6-1/8 inches (18.1 x 16.1 x 15.5cm)
Keep your eyes peeled; the pigeons atop this roof might give you an unexpected surprise!
The H&H Feed Mill is authentically weathered and hand-painted down to the finest details. These details include a positionable grain chute, a cyclone above the dumping area, a large back dock, with a smaller side dock, and other outdoor accessories on the front walk. The H&H Feed Mill includes a printed interior, as well as LED lighting - two interior lights and one exterior light over the dumping area.
The installed LED lighting was made for use with the Just Plug® Lighting System. 30mA, RoHS Compliant.
MidSouth 1035 (gray, white, green)
Throughout the 1970s, the Paducah shops of the Illinois Central rebuilt worn out EMD GP7 and GP9 locomotives into the GP-10. These models feature a smooth-powerful drive, prototype-specific details, Kadee(R) couplers,laser-sharp lettering and etched metal details.
HO Fat Lous Liquor Store - Hydrocal Casting Kit
Beer, wine, lottery tickets, & girlie mags, what else could a guy need? This kit would look great next to the tattoo parlor or strip club. Includes very cool stucco/brick castings, full color signs and complete assembly, painting & ageing instructions.
DIMENSIONS:
4 x 4-1/2 inches.
Phase 1b - American Versions - New York Central - DCC Ready - M459, • Accurate Phase 1 and Phase 2 details and fluting •Correct Phase 1b, Phase 1c and Phase 2 roof blisters •Rapido’s acclaimed “stainless steel†finish •Full interior detail with constant lighting •Two five-pole, skew-wound motors hidden in the actual engine bays •Crazy amount of underbody detail •Separate underframe piping and conduit •Lit number boards and class lights •Optional working front door Mars light, if appropriate •Fabricated or cast truck sideframes, as appropriate •All wheels powered •Separate grab irons and front door chains •Etched-metal roof grills and fan covers •Wrap-around nose fluting, if appropriate•Separate diaphragms, if appropriate •Loads of roadname-specific details
Deteriorated Concrete Sidewalk - Kit
Features
The kits include beautifully detailed Hydrocal castings, plastic Grandt Line doors and windows, full color signs and complete, easy to understand painting and aging instructions. Some kits also include laser cut stencils for painting the large signs on the sides of the structures. These kits are unique in the fact that the master patterns are all hand carved, brick by brick and stone by stone.
D13J Decoder - 1.2 Amp with NMRA 9 pin DCC Quick Plug and Harness
Dimensions: 1.03 x 0.630 x .185 inches (26 x 16.5 x 4.7 mm)
Features of this decoder:
- Silent Running, torque compensated motor drive
- Torque Compensation for ultra smooth low speed performance
- Motor rating 3/4 Amp continuous, 1.2 Amp stall
- All four function outputs have lighting effects generators
D13WP Decoder - 1.2 Amp with NMRA 8 pin plug
Dimensions: 1.03 x 0.630 x .185 inches (26 x 16.5 x 4.7 mm)
Features of this decoder:
- Silent Running ,torque compensated motor drive
- Torque Compensation for ultra smooth low speed performance
- Motor rating 3/4 Amp continuous, 1.2 Amp stall
- All four function outputs have lighting effects generators
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Green
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Gray
Product Information
The LokSound by ESU Super Thin Wire is AWG 36, .5mm, 36AWG super flexible wire. It comes in a 30Ft 10m roll and is matched to common DCC colors.
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Red
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Yellow
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Purple
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Brown
Product Information
The LokSound by ESU Super Thin Wire is AWG 36, .5mm, 36AWG super flexible wire. It comes in a 30Ft 10m roll and is matched to common DCC colors.
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Black
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Orange
ESU Super thin cable,0.02inch 0.5mm dia. AWG36 multi-stran 30FT 10m All DCC colours available. Blue
N Scale Standards Gauge
Designed and developed by the NMRA (National Model Railroad Association) Engineering committee, this pocket sized gauge enables you to check all important dimensions on your track and rolling stock as follows:
Gauge of track and turnouts
Flangeway depth and -check gauge-
Clearance
Height of loading platform
If cars do not run correctly, this gauge will help you pinpoint the trouble. Complete instructions come with each gauge
HO 28 Inch Semi-Scale Insulated Brass Wheelsets - (12/pkg)
Nickel Silver Plated Brass Insulated Wheelsets
These wheels follow NMRA RP-25 Standards.
One wheel is insulated from the all-metal axle.
The entire wheelset is non-magnetic.
The axle length is 1.006in (+- .004in)
28in wheels are used on modern Tri-Level Autoracks, some Bi-Level Autoracks, and some older intermodal cars such as Impack spine cars, front runners & four runners - check your prototype.
33in wheels are used on 50 & 70 ton capacity cars (CAPY approximately 150,000 LBS or less).
36in wheels are used on 100 ton capacity cars (CAPY approximately 200,000 LBS), and on all passenger cars no matter the era.
38in wheels are used on 150 ton capacity cars, primarily the center connection trucks on modern intermodal cars with 33in wheels at the coupler ends.
(Cabooses can use either 33in or 36in wheels depending on the prototype.)
The CAPY information is typically printed on model freight cars and can be used as a guide. Some cars have the wheel size printed on the sides or ends of the car in the data. If you are ever unsure of which size to use, you can simply replace the wheels currently on the car with the same size.
Wheel diameter can be measured with a caliper:
28in wheels measure (28/87.1=.321in) in HO scale.
33in wheels measure (33/87.1=.378in) in HO scale.
36in wheels measure (36/87.1=.413in) in HO scale.
38in wheels measure (38/87.1=.436in) in HO scale.
(87.1 = HO scale to prototype ratio. HO scale is 87.1 times smaller than the prototype).
DN123K3 N Scale Plug-N-Play Decoder For Kato NW2
This 6 function decoder is rated at 1.5A - 2A peak - and has 6 FX3 functions at .5A.
Supports Digitrax FX3 functions and 14, 28 or 128 step speed control.
Other features include -
Torque compensation for smooth, silent operation.
Momentum with acceleration and deceleration.
User selectable normal direction of travel.
Switching speed feature for easier and faster access to yard speeds.
Three-step speed tables set start, mid and max voltage for custom control.
28-step speed tables with 256 level resolution for precise control.
SuperSonic - motor drive for silent operation.
FX3 function outputs for prototypical lighting effects -
Constant brightness lighting with directional or independent control
Realistic effects such as ditch lights, Mars lights, strobes, and more.
Dynamic and static qualifiers operate functions based on direction, F0 on or off, loco direction and F0, and whether loco is moving.
Function remapping for custom setup.
Master light switch turns off all lights and functions with one keystroke.
Advanced consist function controls
Transponder equipped
All-mode programming with operations mode read back - reads back CV values on the mainline
Decoder reset CV with or without speed table reset.
Motor isolation protection prevents decoder damage.
Basic, advanced and universal consisting
Two- or four digit addressing
DCC compatible
Works with most DCC-ready Z, N, and HO Scale locomotives up to 18V track voltage
FCC Part 15, Class B RFI compliant
Decoder lock
Accessory Switch (SPDT) - for fitting to turnout motor - (switch machine)
Kit - 9-3/4 x 9-3/8 x 4-3/8 inches 24.8 x 23.8 x 11.1cm
Easily Expanded - Similar Structures in Many Cities
Moving an endless stream of packages and less-than-carload-lot (LCL) freight shipments for small business, industry and residential customers, the railroad freight house was one of the busiest spots in any big city.
Walthers Freight Office -933-2953 and Freight House - 933-2954 kits are based on structures that stood on Fowler Street, just south of Milwaukees hometown depot. Their classic American design is similar to buildings in many other cities making both models ideal for use in any city terminal or as part of a large industry. Authentic Milwaukee Road signs are included in the Freight Office kit. Special end walls in the Freight House allow modelers to easily combine kits to create a larger facility. These easy-to-build kits have detailed plastic parts and come with illustrated instructions. Individually or combined, they are a great accessory for Walthers Hiawatha.
Phase1b - American Versions New York Central DCC & Sound M461
ESU Loksound & DCC
Accurate Phase 1 and Phase 2 details and fluting
Correct Phase 1b, Phase 1c and Phase 2 roof blisters
Rapidos acclaimed -stainless steel- finish
Full interior detail with constant lighting
Two five-pole, skew-wound motors hidden in the actual engine bays
Crazy amount of underbody detail
Separate underframe piping and conduit
Lit number boards and class lights
Optional working front door Mars light, if appropriate
Fabricated or cast truck sideframes, as appropriate
All wheels powered
Separate grab irons and front door chains
Etched-metal roof grills and fan covers
Wrap-around nose fluting, if appropriate
Separate diaphragms, if appropriate
Loads of roadname-specific details
HO Scale CN Cast Logo (4pk)
HO Scale Diesel Loco Details
HO 36 Inch High Detail Semi-Scale Insulated Brass Wheelsets (12/pkg)
The front and back profile of these wheels is more prototypically accurate.
These wheels follow NMRA RP-25 Standards.
One wheel is insulated from the all metal axle.
The entire wheelset is non-magnetic.
The axle length is 1.006in (+- .004in).
Built & Ready Landmark Structures - Bettys Burning Building
Assembled - 3 x 4-5/16 x 5-5/8 inches (7.5 x 10.9 x 14.3cm)
Great for the center of an action-packed layout, this 3-story brownstone includes flickering lighting effects that create the illusion of a burning building. Custom paint and weathering add the finishing touch of a scorched exterior. The building also includes a exterior yellow light, printed interior and loads of details and scene-setting accessories such as signage, a bicycle leaning against the side, dumpster, wrought iron fire escapes, window treatments and more.
Built-&-Ready Landmark Structures - Clyde & Dales Barrel Factory
Assembled - 6-5/8 x 5-11/16 inches
(16.8 x 14.4cm)
With its definitive architecture, weathered exterior and rooftop water tank, this old beer barrel factory brings back the past when factories had their own water supply. Individually crafted details include a propane tank, dock-high loading areas, exhaust vent and ladders.
Built-&-Ready Landmark Structures - Chips Ice House
Assembled - 6-3/8 x 4-11/16 inches (16.2 x 11.9cm)
Chip is one cool dude, operating one cool business! Chip makes sure layout residents are cool too! The structure has an easy-access loading dock and features full architectural details. It comes with accessories including a conveyor, gas tank and rooftop compressors.
Built-&-Ready Landmark Structures - Old Homestead
Assembled - 3-3/4 x 5-7/16 inches (9.5 x 13.8cm)
She is a bit rough around the edges and the prefect representation of an old rural bungalow, beautifully weathered and loaded with detail. Features include an outhouse, rusting propane tank, a couple of old barrels, a mailbox, old dog asleep on the front porch and more. Pair Old Homestead with the Old Weathered Barn (785-5038, sold separately) to set a complete scene.
HO Windmill - Built & Ready Landmark Structures
Assembled - 3-5/8 x 1-3/4 inches 9.2 x 4.5cm
Built-&-Ready Landmark Structures - Old Windmill
Assembled - 3-3/8 x 2-3/16 inches
(8.57 x 5.55 cm)
Built-&-Ready Landmark Structures - Country Store Expansion
Assembled - 6-7/16 x 5-1/2 inches
(16.4 x 14cm)
The general store is expanding and construction is well underway on the new addition.
Built-&-Ready Landmark Structures - Citizens Savings & Loan Bank
Assembled - 5-1/2 x 4-1/8 inches (14 x 10.5cm)
The local hometown thrift institution assists your layout residents with basic passbook savings accounts, investing and loaning folks cash to plant crops, open small businesses and buy their home.
Built-&-Ready Landmark Structures - J.W. Cobbler
Assembled - 2-31/32 x 4-5/16 inches (7.5 x 10.9 cm)
A door-bell jingles and the rugged smell of leather greets your nose as you walk through the door. You can just imagine the village shoemaker sitting hunched over his cluttered workbench topstitching some new boots or re-soling a pair of shoes.
Short 1/4inch Centerset w/#213 & #234 Draft Gear Box & Talgo Truck Adaptors 2
23 short 1/4inch centerset plastic shank Magne-Matic(R) coupler kit with #213 & #234 draft gearbox or Talgo truck adaptors included. 2 pair.
Bessemer & Lake Erie 803
NEW Paragon3 Sound & Operation System FEATURING ROLLING THUNDERTM with Authentic Sounds and Prototypical Operation in both DC and DCC environments
- Factory Installed Engineer / Fireman Figures
- Locomotive Composition: ABS Body with Die Cast Chassis
- Couplers: (2) Operating Kadee or Compatible
- Compatible Tracks: Code 70, 83, 100 Rail
- Minimum Operating Radius: 18 in or greater
HO AutoScenes - Thompsons Traveling Trailer
The Thompsons are headed out for places unknown.
Capture the classic designs and simple lifestyles of the 1940s and 50s. Each finely crafted, hand-painted automobile, figure and accessory adds color, interest and authenticity to any layout, diorama or project. True 1:87 HO scale models.
Figures included as shown.
Life-Like Products 1009 All Scale - Grass Mat - Light Green - 100 x 25 inches 254 x 63cm
Green Grass You Do not Have to Mow
You will find dozens of uses for these realistic grass mats. They feature a durable paper backing and a nonmagnetic surface that wont rub off. It is easy to cut and shape the mat to fit your layout or diorama, then simply glue or staple to your base. The mats are also great for crafts, architectural use, dollhouses and holiday decor.
JL Innovative Design 376 HO Billboard Signs - Vintage Tractors 1940s-50s pkg - 6 signs
international Harvester, Ford, Allis-Chalmers, Minneapolis-Moline
Machine Tool Centre
N Scale - The Shops (70 x 80ft)
This kit is designed to be built 24 scale feet high. Side walls have cut lines for optional door openings. End walls have 3 engine-house doors provided on front and rear walls. Office portion is 20 X 30 and the location and height is optional.
Kit includes doors, windows, roof top vents, and down spouts.
U&K Plastics - Note Colour - Roof White, Side Walls Blue
43-1/2 X 40 (office) & 70 X 60 (warehouse) Scale Feet / 6 X 5-1/2 & 9-5/8 X 8-1/4 541-0102
Kit - 50 FT Scale w/1 adjustable Pier
one 50 FT Bridge and 1 Adjustable Pier
The Rix Wrought Iron Highway Overpass for HO scales is modeled after the bridges built to span over railroad tracks. The Rix Highway Overpass Wrought Iron consist of 50 foot spans which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
Kit - 50 FT Scale -no Piers
The Rix Wrought Iron Highway Overpass for HO scales is modeled after the bridges built to span over railroad tracks. The Rix Highway Overpass Wrought Iron consist of 50 foot spans which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
HO Maxwell Ave. Porch Kit
The Rix Maxwell Ave. Porch Kit is molded in styrene plastic and features clapboard gable, asphalt shingle roofing, brick porch, doors and steps.
Dimensions:
9 deep x 21 wide x 17 tall scale feet
1-1/4 x 2-7/8 x 2-3/8 inches
29 FT Water/Oil tank peaked top kit
60 foot tall by 24 foot in diameter riveted steel tank with peaked top.
The Rix Water and Oil Tank is designed to represent riveted steel tanks which the railroads started building back in 1880 during the steam era. Today tanks similar to these are being used to hold oil and chemicals. The Rix Water and Oil Tank is made up of 6 band segments which form a complete band. The bands are then stacked one on top of another until they reach the given height. Kits include enough band segment to produce either a 29, 43 or 60 foot tall by 24 foot diameter tank. All tanks are molded in a black polystyrene.
HO Summer Grass Tufts - 1/4 Inch Tall (42pk)
FEATURES:
- Realistic Grass Tufts
- Great for adding long grass to small areas
- Pre-shaped and ready to use
- Ideal for filling pavement cracks, tree bases, along fences and more
- Includes 42 individual tufts in one color
- Flexible transparent bases
HO 40ft Hi-Cube Container w/Flat Roof - Yang Ming
(gray, red, blue)
FEATURES:
- Based on common size & style in service worldwide
- Improved door latch detail
- Great detail for terminals and industrial scenes
- Realistic loads for any well car
- Ready to use
HO 40ft Hi-Cube Container w/Flat Roof - Nedlloyd
(gray, orange, black)
FEATURES:
- Based on common size & style in service worldwide
- Improved door latch detail
- Great detail for terminals and industrial scenes
- Realistic loads for any well car
- Ready to use
HO 53ft Singamas Corrugated-Side Container - Canadian National
(white, gray, red, Worldwide Logo)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes
HO 53ft Singamas Corrugated-Side Container - Hub Group
(red, white)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes
Big Blue Storage Silo
A great storage system for farm or industry, measures a scale 24 FT diameter by 49 FT tall (at eave).
Rail/Truck Transfer Center
Easy to Assemble - Complete instructions
Kit Includes:
Reddish-brown Brick Office Building, Blue Steel Truck Terminal, Gray Concrete Loading Docks (not Shown) Doors, Steps, and Signs
This kit will REQUIRE CUTTING openings for the doors and windows on the loading dock without the pre-measured cut lines usually provided by Pikestuff.
Pikestuff has chosen a plastic which is EASY TO CUT with the use of a sharp hobby knife. (Hobby knife NOT included.)
Location of these openings are completely up to you, so be creative and let your imagination go wild!
Dimensions: 110 x 29 scale feet (15-1/4 x 4 inches)
HO Highway Pier
The Rix Highway Overpass for HO scale is modeled after the bridges built during the 1930s and 1940s to span over railroad tracks. This style of bridge was used all over the country and is common to most people. The pier is designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy!
Contains: 1 pier only.
HO Maxwell Ave. Home - Kit
The Rix Maxwell Ave. House kit is modeled after mid western homes built during the 1930s and 1940s.
They feature clapboard walls, asphalt roof and brick porch.
The Rix Maxwell Ave. House kit come in three versions.
Kit number 201 is a small house with no porch.
Kit 202 is a house with front porch.
Kit 203 is a house with side porch.
Kit 204 is the porch only.
Rix Maxwell Ave. House is molded in three colors.
Roof, Brown.
Walls, White.
Brick Porch, Red.
Dimensions:
28 wide x 31 deep scale feet
3-7/8 x 4-1/4 inches
Dimensions: 25 X 59 Scale Feet / 3-1/2 X 8-1/8 Inches 541-0009
This kit includes doors, windows, gutters, chimney and down spouts. All door and window openings are cut out for you.
This kit is designed with cut lines on the back side of the walls so that door and window locations are optional. Kit includes doors, windows, roof vents and down spouts.e
These Kitbasher Series kits are built up from individual components from several our existing Pikestuff kits. We have done the kit bashing for you by providing you with ofthe parts and instructions to build a unique building from the Pikstuff inventory. These kits require some cutting of the soft plastic. Some cut lines are not provided, but cutting is easy and the instructions will guide you through each step along the way.
Highway Guardrail (3 Pack)
Highway Guardrail (3 Pack) Each guardrail is 25-1/2 scale feet or 3-1/2 inches long and a combined length of 76-1/2 scale feet or 10-1/2 inches long.
HO Add-on Office/Showroom - Kit
This kit is designed with cut lines on the back side of the walls so that door and window locations are optional. Kit includes doors, windows, outside sign (no shown) and down spouts.
Dimensions: 36 wide x 28 deep scale feet / 5 x 3-7/8 inches.
Multi Purpose Building
Dimensions: 40 X 60 Scale Feet / 5-1/2 X 8-1/4 Inches
These Kitbasher Series kits are built up from individual components from several of our existing Pikestuff kits. We have done the kit bashing for you by providing you with the parts and instructions to build a unique building from the Pikstuff inventory. These kits require some cutting of the soft plastic. Some cut lines are not provided, but cutting is easy and the instructions will guide you through each step along the way.
Wood Shack
The bright green door is a little rugged now and the wood paneled walls could use a good wash, but it is still as secure as the day it was built.
Building includes a raised foundation with two staggered steps up to a padlocked door, asphalt shingles, and two barrels once used for collecting rain water.
Exterior details are unattached for customized placement or addition to other structures. Add Shacks along the track or behind factories, businesses, and homes to create even more realistic detail.
Tin Shack
Assembled - 1-7/16 x 1-3/16 x 1-3/16 inches
It is rusted metal walls and weather beaten door shows its true age after standing tall for nearly thirty years through the rain, sun, and snow. The building includes a corrugated metal roof and walls with a little rust and a wooden door. A barrel of iron and an old wheel can be seen leaning against the wall. Exterior details are unattached for customized placement or addition to other structures. Add along the track or behind factories, businesses, and homes to create even more realistic detail.
HO Just Plug Lighted Vehicle - City Classic
Simple, yet elegant, this classic car likes to strut its stuff down main street for all to see!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
HO Just Plug Lighted Vehicle - Green Pickup
This little pickup still has a few thousand miles left and is up for anything!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
HO Just Plug Lighted Vehicle - Midnight Ride
Revved up and ready to go, this timeless coupe is ready for a night time cruise under the stars!
Just Plug vehicles make it easy to model backcountry roads or busy city scenes. With a driver and a set of headlights and taillights, your layouts traffic has never looked so realistic! Add a vehicle to a Just Plug light hub for easy installation. Just Plug and you are done!
(20mA per Vehicle)
HO Retaining Wall - Cut Stone (3pcs)
Tunnel Portals, Retaining Walls, Culverts, and Roads reinforce natural terrain contours and add functionality, realism and interest to your layout. The high-density castings are detailed realistically, colored easily with Earth Colors Liquid Pigment and meet NMRA specifications.
Use Retaining Walls alone, installed adjacent to each other to create straight or curved walls or use with Tunnel Portals. Cut to varying heights to create stepped, winged walls. Color easily and realistically with Earth Colors
Liquid Pigment. Set contains three pieces.
HO Bulk Pack - Whisker Metal Couplers - Long (25/64 inch) Centerset Shank (25pair)
The next evolution of model train couplers starts and ends with the Kadee Whisker series of couplers. The scale size and detail of the #58 coupler has long been popular with model railroaders, so we knew we had to offer a Whisker version. The #156 is a Long Centerset scale sized coupler with smaller head and knuckle for a more prototypical look. The #156 features an even longer-lasting and more reliable design. No more fumbling with centering springs. No more multi-piece assemblies. The #156 Whisker coupler is a true drop-in coupler. Use Kadee Whisker couplers in your next model and enjoy the most reliable and smooth coupling experience you have ever had. Always made right here in the USA with legendary Made In America quality.
The #156 is interchangeable with the #26, #36, #146, and most manufacturers Long Centerset OEM knuckle couplers. For a #36 equivalent use the #156 in a #252 Gearbox.
Package Includes:
- (25) Pair #156 Scale Whisker Metal Couplers - Long Centerset Shank
- (10) Spare #625 Knuckle Springs
(Gearboxes not included)
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage. For insulated couplers use the #26 coupler.
Detail Associates 2007 HO - Cooling Fans - Q-Type 52 inch 1994
Strolling Figures 6 pcs
HO Single Track Cut Stone Tunnel Portal
(4-1/2 x 4-1/2Ft) 11 cm X 11 cm
Product Features
Hand cast in durable resin.
Exquisite cut stone detail!
Single track entrance.
Can be cut with razor saws, and shaped with files.
Product Specifications
Scale: HO 1:87
Width: 4-1/4Ft (108mm)
Height: 4-3/8Ft (110mm)
HO Double-Track Cut Stone Tunnel Portal - 6 x 5-1/8 Inches (1pc)
HO Ballast Spreader
Spread ballast the easy way with this handy tool!
HO Stepped Tunnel Abutment - Cut Stone (1 Pair)
DIMENSIONS:
Base - 4-1/2 inches (11.4cm)
Max Height - 3-1/2 inches (8.9cm)
Red, Black, Gray Load, Black Trucks
The Schnabel cars unique design allows it to carry extremely heavy or oversized loads, such as generators and transformers for power stations, by making the load an element of the car. The two tapered lifting arms that hold the load resemble a birds beak, which gave the car its name Schnabel is from the German for carrying-beak-wagon -Tragschnabelwagen. Schnabel is a funny name for a seriously powerful freight car.
Features include:
16 sets of 125-ton roller-bearing trucks
prototypically correct 36 inch metal wheels
RP25 wheel contours
8 span bolsters
detailed transformer load
molded hydraulic lines and pumps
27.5 inches long
E-Z Mate Mark II couplers
This model performs best on 22 inch radius curves or greater.
Gray, Black, Red Load, Black Trucks
The Schnabel cars unique design allows it to carry extremely heavy or oversized loads, such as generators and transformers for power stations, by making the load an element of the car. The two tapered lifting arms that hold the load resemble a birds beak, which gave the car its name Schnabel is from the German for carrying-beak-wagon -Tragschnabelwagen. Schnabel is a funny name for a seriously powerful freight car.
Features include:
16 sets of 125-ton roller-bearing trucks
prototypically correct 36 inch metal wheels
RP25 wheel contours
8 span bolsters
detailed transformer load
molded hydraulic lines and pumps
27.5 inches long
E-Z Mate Mark II couplers
This model performs best on 22 inch radius curves or greater.
HO Double-Track Concrete Tunnel Portal (1/pkg)
Dimensions: 6-5/8 x 5-1/4 inches (16.8 x 13.3cm)
Features:
- Hand cast in durable resin.
- Exquisite concrete detail!
- Double track entrance.
- Can be cut with razor saws, and shaped with files.
HO Scale Double Track Cut Stone Bridge Pier
Fits Central Valley Double-Track Truss Bridge
Signal Driver Cable Kit
Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.
Use this kit to make signal driver cables to connect your SE8c to the signals on the railroad. Make the cables any length that you desire and place the signal connectors at the locations where you will install signals. All the signals are carried neatly in the ribbon cable so you can avoid a “bird’s nest†under your layout.
Casco - 50302
Etched metal roof walks
Detailed brake gear with scale piping
Blackened metal wheels
Accurate painting and printing
100-ton roller-bearing trucks and body mounted AccuMate couplers with screw-attached coupler pockets
Casco - 50288
Etched metal roof walks
Detailed brake gear with scale piping
Blackened metal wheels
Accurate painting and printing
100-ton roller-bearing trucks and body mounted AccuMate couplers with screw-attached coupler pockets
Casco - 50298
Etched metal roof walks
Detailed brake gear with scale piping
Blackened metal wheels
Accurate painting and printing
100-ton roller-bearing trucks and body mounted AccuMate couplers with screw-attached coupler pockets
Diesel EMD SD40-2 CSX 8811
ESU LokSound and DCC
This locomotive has working front ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5 inches
Long 25/64inch Centerset w/#233 Draft Gear Boxes 2 Pair
Terminal Strip Mounting Kit - 2 units
Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads. Use this interface instead of Signal Mast Bases when you already have signals installed on your layout. Simply run the wires from your existing signals to the terminals on the TSMK and plug your Signal Driver Cable in on the plug provided.
Diesel EMD SD40-2 - First Union Rail Leasing CEFX #3187
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
Diesel EMD SD40-2 - First Union Rail Leasing CEFX #3183
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
Diesel EMD SD40-2 - First Union Rail Leasing CEFX #3184
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
Diesel EMD SD40-2 - First Union Rail Leasing CEFX #3176
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
Diesel EMD SD40-2 - Saint Lawrence & Hudson #5651
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
Diesel EMD SD40-2 - Saint Lawrence & Hudson #5690
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
Diesel EMD SD40-2 - Saint Lawrence & Hudson #5627
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
Diesel EMD SD40-2 - Saint Lawrence & Hudson #5615
ESU LokSound DCC & Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
Diesel EMD SD40-2 - Saint Lawrence & Hudson #5690
ESU LokPilot DCC -motor and light control
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
Diesel EMD SD40-2 - Saint Lawrence & Hudson #5651
ESU LokPilot DCC -motor and light control
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
Diesel EMD SD40-2 - Saint Lawrence & Hudson #5627
ESU LokPilot DCC -motor and light control
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
HO Cable Excavator w/Bucket - Kit
Product Information
Put this easy-to-build Walthers SceneMaster vehicle kit to work along your HO layout! The model features:
Designed for easy assembly - illustrated step-by-step instructions
Highly detailed to bring HO layouts to life
Plastic parts molded in realistic colors
Typical of shovels used from the 1950s to 1990s
Detailed crawler chassis, boom and bucket
Photo shows assembled model.
HO Farm Combine w/Grain & Corn Heads - Kit
Product Information
Put this easy-to-build Walthers SceneMaster vehicle kit to work along your HO layout! Perfect for any farm scene, the detailed model includes complete instructions and features:
Designed for easy assembly - illustrated step-by-step instructions
Highly detailed to bring HO layouts to life
Build with your choice of corn or grain heads - both included
Use with SceneMaster Harvest Corn (949-1141) or Wheat Fields (949-1143, both sold separately)
Adaptable as load for flatcar or truck
Includes trailer for head transport
Positonable parts for added realism
Molded in two colors and clear plastic
Photo shows assembled model.
HO Asphalt Country Road
39-5/8 x 2-19/32inch 1m x 66mm (Yellow Line Markings)
Western Coal Flood Loader - Kit
32 x 4-1/2 x 16 81.3 x 11.4 x 40.6cm - Conveyor Sections; 7-1/16inch 18cm Ea
The basic building includes a variety of roof-top machinery that puts realistic detail in this highly visible location. Modular conveyor sections can be arranged in a variety of ways, or combined with other buildings like the New River Mining Company, (933-3017) or Glacier Gravel (933-3062) to model a complete scene. And, the stackable silo sections allow you to easily build a tall or short structure that can fit where overhead clearance may be limited.
Turf Medium Green
Models low grasses, leaves and weeds. Adds texture and highlights to trees and scenery. Provides a smooth transition from low ground cover to medium and high ground cover. Available in 11 natural colors. Attach with Scenic Cement. Purchase the Scenery Manual for additional information on how to use the Landscape System.
Particle size is approximately 1/32inch x 1/8inch (0.79 mm x 3mm)
HO 40ft Hi-Cube Container w/Flat Roof - APL
(brown, white)
FEATURES:
- Based on common size & style in service worldwide
- Improved door latch detail
- Great detail for terminals and industrial scenes
- Realistic loads for any well car
- Ready to use
Motorized 130 Ft Turntable w/DCC - Assembled - 19-1/8 inches 47.8cm Overall Diameter
130 Ft (39.6m) length typical of bigger tables built from 1900s on - some still in service today
Must-have detail for engine terminals
130 Ft (39.6m) length holds locos up to 18-7/8 inches (46.1cm) long - big enough for a 4-8-8-4!
Layout mounting templates for pit & Cornerstone Turntable Control Box
User-friendly, illustrated instructions simplify assembly
Requires 18-1/4 inches (45.6cm) mounting hole 19-1/8 inches (47.8cm) overall diameter
Control Box included for use on layouts with DC or DCC train control
New Cornerstone Turntable Control Box for simple operation & programming with:
- Programmable indexing for up to 99 different tracks
- One-touch 180-degree bridge rotation in either direction
- Simplified LED display with adjustable brightness
- Operate from up to four locations with add-on Cornerstone Turntable Control Boxes (#933-2320 each sold separately)
Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately)
Comes complete with motor & Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included)
Comes with Code 83 rail installed on bridge
For more information and accessories
Cornerstone Turntable Control Box
Cornerstone Advanced Turntable Control Module
HO Motorized 90ft Turntable - 13-3/4 Inch Overall Diameter
Sure to be the focal point of any HO scale engine terminal, this Walthers Cornerstone 90ft motorized turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, most smaller turntables were placed adjoining the roundhouse and servicing tracks. This 90 ft turntable is large enough to turn typical locomotives as large as a 2-8-2 Mikado or 4-6-2 Pacific. It will look great at smaller terminals, at junctions, and anywhere else steam locomotives must be turned.
TURNTABLE FEATURES:
- Typical of tables built from 1900s on - some still in service today
- Fits most engine terminals
- Holds locos up to 12-3/8 inches long
- User-friendly, illustrated instructions simplify operation and programming
- Layout mounting templates for pit and Cornerstone Turntable Control Box
- Control Box included for use on layouts with DC or DCC train control
CONTROL BOX FEATURES:
- Programmable indexing for up to 99 different tracks
- One-touch 180-degree bridge rotation in either direction
- Simplified LED display with adjustable brightness
- Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately)
Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately)
Diesel EMD SD40-2 BC Rail #753
ESU LokPilot DCC -motor and light control
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
Diesel EMD SD40-2 BC Rail #757
ESU LokSound DCC w/Sound
This locomotive has working ditch lights.
This is the initial release of the InterMountain Railway HO scale SD40-2. The model has a new drive with six wheel HTC trucks, equipped for DC or DCC operation, plus ESU LokSound sound effects. There are numerous finely molded features including snow shields, radiator fan blades, ditch lights, walkway tread, and cab interior. Etched metal details include radiator and fan grills, stair treads, drop steps, wipers, and antenna. Grab irons are metal wire. Kadee couplers are included. Minimum Radius 19.5inch
HO Wood Water Tank - Kit
Product Information
The Walthers Cornerstone Wood Water Tank kit is a typical wooden water tank as used on railroads from coast to coast. Constructed to satisfy steam locomotives thirst for water, this fully assembled and decorated model adds instant steam-era realism to any layout. Appearing early in the 20th century, tanks like this were a fixture of railroad facilities until the last days of steam. Its perfect for busy engine terminals, small town yards and near smaller depots where engines were watered during the station stop. The Wood Water Tank kit features detailed wooden support timbers, positionable spout and ladder details.
As shown the kit measures: 3-1/2 x 3-7/8 x 6-5/8inch (8.7 x 9.6 x 16.5cm)
The Wood Water Tank will be a welcome addition to any servicing scene alongside other Cornerstone railroad maintenance structures.
Detailed wood support timbers
Positionable spout
Easy-to-build plastic kit
Molded in gray for easy painting
Perfect for steam-era railroads
Masonry & Cement Workers 11pcs
A set of four men. One pushes a wheelbarrow, one operates a cement mixer powered by a generator, one wields a heavy shoulder load and another stands ready to work.
Tombstones 20 pcs
Set includes a twenty-piece assortment of square, rounded, cross and obelisk tombstones
Farm Horses 6 pcs
Set includes five adult sturdy work horses and one foal in various poses.
HO Built-&-Ready Landmark Structures - Ethyls Gas & Service
Product Information
This vintage gas and service station with its open-beamed overhang, the old globed gas pumps, decals, signage and scene-setting detail is loaded with charm and nostalgia. Details include trash cans, an old bench and chair, cola machine, ice machine and pallets of old junk and car parts. The fenced outdoor service area features an oil-stained concrete floor, a lift, free-standing kerosene tank, old tires, dolly, pole lights and loads more.
N Scale Steel Water Tank - Kit
2 x 2 x 4-1/2inch 5 x 5 x 11.4cm
Great for late steam- and transition-era layouts
Found at engine servicing facilities in terminals and on the main line
Includes parts for two water columns and oil column
Simulated steel construction with rivets and other fine details
Molded in black plastic
Measures: Tower: 2 x 2 x 4-1/2inch 5 x 5 x 11.4cm
Water Columns, each: 1/2 x 7/8 x 2inch 1.2 x 2.2 x 5cm
Oil Column: 1/2 x 1/2 x 1-1/2inch 1.2 x 1.2 x 3.8cm
Single Lamp Post Street Light - 3 sets
Use to light street corners, sidewalks, parks and more. 20mA/set RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 0.484 in w x 2.76 in h (12.3 mm w x 70.1 mm h)
HO Harvest Corn Field - Brown
Plant a bumper crop on any farm along your layout with this easy to use SceneMaster Corn Field kit, available in two colors (each sold separately) to match the season along your layout. Earth-colored baseplates are also included for easy assembly and installation in new or existing scenery.
FEATURES:
- x400 1 inch tall cornstalks
- Covers about 15 square inches, (100 square centimeters)
- Flocking for tassels
- Base plate for easy alignment & assembly
HO Summer Corn Field - Green
Plant a bumper crop on any farm along your layout with this easy to use SceneMaster Corn Field kit, available in two colors (each sold separately) to match the season along your layout. Earth-colored baseplates are also included for easy assembly and installation in new or existing scenery.
FEATURES:
- x400 1 inch tall cornstalks
- Covers about 15 square inches, (100 square centimeters)
- Flocking for tassels
- Base plate for easy alignment & assembly
Peco PLS-135 Stationary Decoder
Peco Products PLS-135 SmartSwitch Stationary Decoder for use with PLS-100 for DCC control
The Peco-PLS 135 SmartSwitch Stationary Decoder can be operated by a DCC controller, and uses the constant DCC voltage in the rails as its power supply. The decoder is also easy to program, and is compatible with most makes of DCC control systems.
HO Code 83 - #4 Wye Turnout
Peco Code 83 items are realistic models of North American railroad track, with Code 83 nickel silver rail. Scaled from A.R.E.A. drawings and NMRA compliant, Code 83 features authentic tie sizes and spacing, the standard American number system for frog geometry, plus a very fine representation of traditional rail spike fixings.
Technical Specification:
Length: 183mm
Frog Angle: 14.3 Degrees
Radius: 978mm
SL110 Conducting Rail Joiners: Nickel Silver for PECO Code 83 track
SL111 Insulated Rail Joiners for PECO Code 83 track
SL14 Track Fixing Pins: Chemically blackened mild steel for unobtrusively pinning down trackwork
Orange Cab, White Body
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Positionable Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
This medium-duty truck line was introduced in the late 1980s. Powered by a Navistar DT inline six-cylinder diesel engine capable of up to 350 horsepower, the 4900 series has been a great starting point for a wide range of commercial vehicles, including delivery vans, single- and dual-axle semi tractors, as well as fire apparatus and other government applications
Code 83 Track Insulfrog 90 Degree Crossing
83 Line items are realistic models of North American railroad track, using Code 83 rail. Scaled from prototype drawings with all new tooling using the latest CADCAM technology, this Code 83 product range features authentic tie sizes and spacing.
Features
Insulfrog, ready-wired for immediate use.
HO 18 Inch Diameter Old-Time Metal Brake Wheels (6pk)
Die-cast metal brake wheel.
HO Plastic Couplers w/Gearboxes - Medium (9/32 inch) Overset Shank (2pair)
This industry leading coupler features plastic standard coupler with metal knuckle, and #634 standard centering spring and comes complete with insulated draft gearbox and lid. The #22 Magne-Matic Plastic Coupler may be mounted with the included #213 or #232 Gearbox or with most other manufacturers cast-on coupler pockets.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.
Package Includes:
- (2) Pair #22 Plastic Shank Couplers - Medium Overset Shank
- (2) Pair #634 Centering Spring NO.5 Style
- (2) Pair #213 .055 inch ID & .100 inch ID Bushing/Sleeves
- (2) Pair #212 Talgo Truck Adaptors
- (2) Pair #213 Gearboxes
- (2) Pair #232 Gearboxes
- (2) #622 Knuckle Springs
HO 36Inch Diameter Ribbed Back Passenger Wheelsets (12 sets)
Ribbed wheelsets are most commonly found on steam era rolling stock. Kadee(R) wheel sets are manufactured to the most exacting standards.
Features
- 12 Sets per Package
- Code 110
- Accurate Markings
- Incredible Detail True to Prototype
- Non-magnetic Metal Wheels
- Smooth Tracking Free Rolling Contoured Insulated Axles - RP-25 Free Rolling Wheels
- Needlepoint Axles
Styrene Sidewalk Sheet - 1/8in x 1/8in Opaque White Polystyrene Sidewalk (1 Sheet)
011in (.28mm) GROOVE SPACING.
.040in THICK.
6in x 12in SHEET
Mini-Panel - Automation Controller for NCE DCC Systems
Use one button to control multiple switches or macros on your NCE DCC system. You can have up to 30 pushbuttons, toggle switches, block detectors,etc. Can be connected for control of turnouts, signals and other devices. Easy programming, just plug in a Pro Cab or a Powercab. Simple hook up, one Cab Bus connection and 2 wires for each pushbutton or other input device. Can be used to perform simple automatic train control and other layout automation tasks.
Concrete Segmental Bridge Set A, One Complete Bridge - Plastic Kit
Ends & Segments
Expand with Set B #4391
Era: 1970s+
Found across the United States, Modern Concrete Segmental Bridges have replaced literally thousands of aging wooden or early concrete styles of the past.
Featuring generic parts and easy construction, railroads across the country have been using this bridge style for decades due to its low cost, expandability, ease of maintenance, and durability.
Model Description:
Our model faithfully recreates the prototype down to small details like bolt heads! Featuring the same expandability as the prototype, this product is available in two sets:
- Set (A) with (2) two ends and (3) three segments.
- Set (B) with (3) three additional segments.
Dimensions:
- Length (Set A - End to End): 6.85inch (scale 50 feet)
- Width (Trackbed): 1.80inch (scale 13 feet)
- Width (Outside): 2.63inch (scale 19 feet)
- Segment Length: 1.92inch (scale 14 feet)
- Height (floor to bottom): 1.15inch (scale 8.3 feet)
Model Features:
Features:
- Easy to Assemble!
- Injection-Molded Plastic
- Light Gray Concrete Color
- Perfect for 1970+
- Ultra-Common Design
- Extremely Accurate Detail
- Fine-Scale Handrails
HO Replacement Pad for Walthers Track Cleaning Cars
HO International 4300 Utility Truck w/Drill - Assembled - Yellow
Product Information
Licensed replica of popular International trucks
Must-have for HO model railroads
Perfect size for collectors
Positionable parts on many models
Fully assembled and painted
Die-cast metal and plastic parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Introduced in 2002 to replace the 4000-series trucks of the 1990s, the medium-duty 4300 was built in three variations and became a very popular chassis for a variety of commercial applications. Today, theyre still in production as the International Durastar.
INTERNATIONAL(R) and other International Truck trademarks are licensed by International Truck Intellectual Property Company, LLC.
HO Crossing Flashers - Set of 2 Working Signals
Product Information
Make HO Scale highways safer and more realistic with these working models from SceneMaster featuring:
Two US-style crossbucks with forward-facing LEDs
Fits layouts from the 1960s to the present
Fully-assembled for easy installation in new or existing scenes
Operate with Grade Crossing Signal Controller #949-4359 (sold separately)
Diesels - Pyle Dual Seal Beam Conversion for 14-1/2 inch Lights pkg(2)
HO Scale Headlight housing parts are based on those used on many late-production locomotives. This headlight part is part of the line of Detail Associates HO Scale locomotive detail parts.
Circuitron 6190 All Scale Tortoise Drilling Template
Loudspeakers 11mm x 15mm 8 Ohms, with sound chamber
The ESU model designed sound chamber that allow the height of the sound chamber to be custom fit to the available space.
The speakers can be wired in series or in parallel when used with ESU LokSound sound decoders since the Loks are rated for a speaker impedance of 4-16 ohms.
HO Lasercut Graffiti Decals Mega Set - Set #6 pkg(9)
9 Design -Tags-
All of our graffiti decal sets are now lasercut. What this means is you no longer will have to trim the decal close. You only have to cut a couple of small tabs and soak the sheet in water. The trimming has been done for you by our laser cutter! As an added bonus the decals are printed on white decal paper making them more opaque.
Love it or hate it, graffiti is everywhere. We do not condone painting graffiti on real railroad cars, buildings, bridges, etc. and it is against the law. But defacing your model railroad with Blair Lines Graffiti Decals is fun and still legal as far as we know! All decals are reproductions of graffiti found on real railroad cars. Decals are not shown actual size.
HO Lasercut Graffiti Decals Mega Set - Set #10 pkg(11)
11 Design -Tags-
All of our graffiti decal sets are now lasercut. What this means is you no longer will have to trim the decal close. You only have to cut a couple of small tabs and soak the sheet in water. The trimming has been done for you by our laser cutter! As an added bonus the decals are printed on white decal paper making them more opaque.
Love it or hate it, graffiti is everywhere. We do not condone painting graffiti on real railroad cars, buildings, bridges, etc. and it is against the law. But defacing your model railroad with Blair Lines Graffiti Decals is fun and still legal as far as we know! All decals are reproductions of graffiti found on real railroad cars. Decals are not shown actual size.
HO Lasercut Graffiti Decals Mega Set - Set #9 pkg(9)
9 Design -Tags-
All of our graffiti decal sets are now lasercut. What this means is you no longer will have to trim the decal close. You only have to cut a couple of small tabs and soak the sheet in water. The trimming has been done for you by our laser cutter! As an added bonus the decals are printed on white decal paper making them more opaque.
Love it or hate it, graffiti is everywhere. We do not condone painting graffiti on real railroad cars, buildings, bridges, etc. and it is against the law. But defacing your model railroad with Blair Lines Graffiti Decals is fun and still legal as far as we know! All decals are reproductions of graffiti found on real railroad cars. Decals are not shown actual size.
HO Lasercut Graffiti Decals Mega Set - Set #2 pkg(9)
9 Designs
All of our graffiti decal sets are now lasercut. What this means is you no longer will have to trim the decal close. You only have to cut a couple of small tabs and soak the sheet in water. The trimming has been done for you by our laser cutter! As an added bonus the decals are printed on white decal paper making them more opaque.
Love it or hate it, graffiti is everywhere. We do not condone painting graffiti on real railroad cars, buildings, bridges, etc. and it is against the law. But defacing your model railroad with Blair Lines Graffiti Decals is fun and still legal as far as we know! All decals are reproductions of graffiti found on real railroad cars. Decals are not shown actual size.
Mascot Precision Tools 810 Pin Vise - Double End
pkg(6)
Two foals and four adult horses complete this set. All six are a beautiful chestnut color, some graze and others stand, heads held high
Milk Cans, Bottles & Cases
Detail trackside milk platforms, station scenes, dairies, milk trucks & more
20 milk cans with handles & lids
8 milk cases
Bottles molded in white (full) & clear (empty)
HO Spring Wheat Field - Green
Plant a bumper crop on any farm along your layout with this easy to use SceneMaster Wheat Field kit, available in two colors (each sold separately) to match the season along your layout.
FEATURES:
- x4000 3/8 inch tall plants
- Choose from 2 seasonal colors to fit your layout
- Covers about 15 square inches (100 square centimeters)
For HO Scale Locomotives Equipped with 21MTC Interface
- 1.5 Amp/2 Amp Peak
- 2 FX3 Functions, 0.5 Amp
- Series 6 Decoder Features.
- Works with PX112-2 Power Xtender.
- .805 x.64x.17 inch
- 20.45mm x 16.26mm x 4.32mm
Double Lamp Post Street Lights - 3 units
Use to light street corners, sidewalks, parks, light depots, rail yards, alley ways, sidings, parking lots and more. 20mA/set. RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 0.264 in w x 1.5 in h (6.7 mm w x 38.1 mm h)
Lamp Post Street Lights - 3 units
Use to light depots, rail yards, alley ways, sidings, parking lots and more. 20mA/set. RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 1.125 in h x .125 in w (25 mm h x 2 mm w)
HO Factory Flat - Cast Hydrocal Kit
DIMENSIONS:
25 x 1/2 inches
Designed to go up against the backdrop of your layout, this is thin in size but long in the detail department. Tichy doors and windows, iron security bars, fire escapes, signs, packing & shipping crates, wire to create the funky razor security wire, vents, piping etc. You pretty much get everything except the dog & the truck. The walls are all individual castings so you can arrange them in a different way if you like. This industrial, gritty looking factory would look great by the train tracks!! Check out the detail in the castings!
Wooden Pole Street Light - Just Plug(TM) - Package of 3 units
Use to light depots, rail yards, alley ways, sidings, parking lots and more. Also includes an extension pole to make the light pole taller for a broader reach. 20mA RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 1.071 in w x 3.449 in h (27.2 mm w x 87.6 mm h)
Dimensions with extension piece - 1.071 in w x 5.516 in h
(27.2 mm w x 140.1 mm h)
HO 53ft Singamas Corrugated-Side Container - Matson
(gray, blue)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes
HO 53ft Singamas Corrugated-Side Container - Canadian National
(gray, red; CN Intermodal Logo)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes
HO 53ft Singamas Corrugated-Side Container - Canadian Tire
(red, white, green)
FEATURES:
- Great door latch detail
- Realistic corrugated sides, roof and ends
- Ideal loads for WalthersMainline and WalthersProto well cars or intermodal flatcars
- Use with other SceneMaster HO Scale Intermodal Containers
- Ready to use
- Great detail for terminals, highways and industrial scenes
HO Old Brick Sidewalks - Cast Hydrocal Kit
These rustic brick sidewalks are cast in hydrocal for maximum realism. You get six straight sections and four corners, enough to do about 3 feet of sidewalk.
Rock Molds - Weathered Rock
Highly detailed, flexible and durable rock molds can be used to cast small boulders, rock outcroppings, top rocks for fields and creeks, or make entire rock faces by combining castings produced with these molds.
Double Lamp Post Street Lights - 3 sets
Use to light street corners, sidewalks, parks and more. 20mA/set RoHS Compliant.
3 Warm White LED Street Lights/pkg
Dimensions 0.484 in w x 2.76 in h (12.3 mm w x 70.1 mm h)
HO Etched Brass Cab Sunshades - Comfort Cab (4pk)
Replace fragile plastic shades with durable brass etchings. Great for models which are handled often. Shades are adjustable and include mounting instructions.
HO Etched Brass Cab Sunshades - E & F Unit Diesels (6pk)
Replace fragile plastic cab sunshades with durable A-Line HO scale brass etchings. Great for models that are handled often, shades are adjustable and include mounting instructions. Available in multiple styles, sunshades are available for virtually any locomotive or caboose.
HO Double Billboard - Kit
DIMENSIONS:
5-1/2 x 1-1/4 x 2 inches
Double-Track Cut Stone Bridge Abutment - Fits Central Valley Double-Track Truss Bridge
Walthers Cornerstone - HO Tanker Truck Loading Rack - Kit
7 x 3-1/2 x 3-3/16inch 17.8 x 8.9 x 8.1cm
Prototypes simplify filling tank trucks for local delivery
Typical of loading equipment found at refineries and distribution centers
Covered loading are serves two lanes of vehicles
Detailed piping, discharge equipment & pumps
Keep tank trucks rolling with local deliveries when you fill them up at this Loading Rack. Typical of the facilities found at refineries and regional distribution centers, the easy-to-build kit includes detailed piping, discharge equipment, pumps and a large awning that spans two lanes for safe loading in any weather.
New York Central #1842 - ESU DCC & Lok Sound
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, can motor, flywheels, nickel silver wheels with RP25 flanges and KD® couplers. Analog (DC) version features NMRA 8 & 21 pin plug for DCC, DCC/Sound version features LokSound Select Dual-Mode decoder which allows locomotive to be used on DC as well as on DCC layouts.
Alaska Railroad #1508 - DCC & Lok Sound
Features: air hoses, windshield wipers, grab irons, coupler lift bars, operating headlight, window glass, can motor, flywheels, nickel silver wheels with RP25 flanges and KD® couplers. Analog (DC) version features NMRA 8 & 21 pin plug for DCC, DCC/Sound version features LokSound Select Dual-Mode decoder which allows locomotive to be used on DC as well as on DCC layouts.
Norfolk Southern NS #2805
These were former ATSF and BNSF Locomotives. Units were acquired in September 2014 via NRE.
SD75M body with turbo -bulge-
Early dynamic brake grills
Nathan 5 chime horn
Two grab irons on cab roof
Tinted cab windows
Nose door with window
Short sunshade brackets
Large and small Sinclair antennas
SD75M 4-step walkway
Spare knuckles and holders on rear pilot
Drop grab irons (MU hose holders) on rear pilot
Low-tab mounted AEI tags
Early jacking pads
Front round top ditch lights
EMD low plow
MU receptacles w/ yellow MU cables front and rear
Late 5000 gallon fuel tank
Stem-mounted fuel gauge and late sight glass
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Operating ditch lights
MU receptacles and cables per prototype
Pilot face spare knuckles and brackets per prototype
Early or late anticlimbers
3 or 4 step walkways
AEI tags mounted on the frame or jacking pads per prototype
Safety tread on the walkways
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Anti-glare panel painted on the nose
Windshield wipers
Tinted or clear cab windows per prototype
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Standard or Freight-style brake wheel
See-through radiator fans
Lift rings
Factory installed wire grab irons
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Dual sanding lines
Rear pilot drop grab iron (MU hose retainer) pre prototype
DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on Code 55 and larger rail
Incandescent bulbs for realistic appearance
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Recommended radius: 22inch
Onboard DCC decoder with SoundTraxx Tsunami sound
Norfolk Southern NS #2802
These were former ATSF and BNSF Locomotives. Units were acquired in September 2014 via NRE.
SD75M body with turbo -bulge-
Early dynamic brake grills
Nathan 5 chime horn
Two grab irons on cab roof
Tinted cab windows
Nose door with window
Short sunshade brackets
Large and small Sinclair antennas
SD75M 4-step walkway
Spare knuckles and holders on rear pilot
Drop grab irons (MU hose holders) on rear pilot
Low-tab mounted AEI tags
Early jacking pads
Front round top ditch lights
EMD low plow
MU receptacles w/ yellow MU cables front and rear
Late 5000 gallon fuel tank
Stem-mounted fuel gauge and late sight glass
LOCOMOTIVE FEATURES:
Fully-assembled and ready-to-run
Front / rear trainline and MU hoses with silver ends
Coupler cut levers with loops per prototype
Sunshades and sunshade tracks per prototype
Roof details such as antennas, air conditioners, beacons, and conduits per prototype
Operating ditch lights
MU receptacles and cables per prototype
Pilot face spare knuckles and brackets per prototype
Early or late anticlimbers
3 or 4 step walkways
AEI tags mounted on the frame or jacking pads per prototype
Safety tread on the walkways
Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
Anti-glare panel painted on the nose
Windshield wipers
Tinted or clear cab windows per prototype
Detailed and painted cab interior with control stand, display screens, detailed crew seats
Standard or Freight-style brake wheel
See-through radiator fans
Lift rings
Factory installed wire grab irons
Fine-scale Celcon handrails for scale appearance
Underframe mounted bell- regular or electronic
Low mount stepwell lights (non-operating)
Dual sanding lines
Rear pilot drop grab iron (MU hose retainer) pre prototype
DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
McHenry lower-shelf scale knuckle spring couplers
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on Code 55 and larger rail
Incandescent bulbs for realistic appearance
Bidirectional constant lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Packaging securely holds for the model for safe storage
Minimum radius: 18inch
Recommended radius: 22inch
Onboard DCC decoder with SoundTraxx Tsunami sound
HO SD70 - DCC/Sound - Illinois Central #1037
ROAD NUMBER SPECIFIC FEATURES:
All Units:
- Early dynamic brake grills
- Integrated Cab Equipment (ICE) equipment bulge on low nose
- Nathan P5 horn
- EMD Spartan cab detailed with corresponding interior
- Toilet hatch
- IC late battery boxes
- Cab mounted Sinclair and small can antennas
- Walkway-mounted spare knuckle basket
- Spartan cab 4-step walkway
- Non illuminated engineers side ground light
- Spare knuckles and holders on rear pilot
- Drop grab irons (MU hose holders) on rear pilot
- Sidesill-mounted AEI tags
- Early jacking pads
- Front / Rear flat-top ditch lights with angle kick plates
- CSX/NS style tall plow
- Early anticlimbers
- Front / Rear MU receptacles with light brown cables
- Large EFCO button
- Early speed recorder
- Early 5000 gallon fuel tank with digital fuel gauge and single sight glass
- Era Late 1999+
#1021, 1025:
- Low cab handrail
#1032:
- Standard cab handrail
#1037:
- Late-angled cab handrail
MODEL FEATURES:
- Fully-assembled and ready-to-run
- Front / rear trainline and MU hoses with silver ends
- Coupler cut levers with loops per prototype
- Sunshades and sunshade tracks per prototype
- Roof details such as antennas, air conditioners, beacons, and conduits per prototype
- Operating ditch lights
- MU receptacles and cables per prototype
- Pilot face spare knuckles and brackets per prototype
- Early or late anti-climbers
- 3 or 4 step walkways
- AEI tags mounted on the frame or jacking pads per prototype
- Safety tread on the walkways
- Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
- Anti-glare panel painted on the nose
- Windshield wipers
- Tinted or clear cab windows per prototype
- Detailed and painted cab interior with control stand, display screens, detailed crew seats
- Standard or Freight-style brake wheel
- See-through radiator fans
- Lift rings
- Factory installed wire grab irons
- Fine-scale Celcon handrails for scale appearance
- Underframe mounted bell- regular or electronic
- Low mount stepwell lights (non-operating)
- Dual sanding lines
- Rear pilot drop grab iron (MU hose retainer) pre prototype
- DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
- McHenry lower-shelf scale knuckle spring couplers
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on Code 55 and larger rail
- Incandescent bulbs for realistic appearance
- Bidirectional constant lighting so headlight brightness remains constant
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Minimum radius: 18 inch
- Recommended radius: 22 inch
SOUND EQUIPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami sound
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
HO SD70 - DCC/Sound - Illinois Central #1025
ROAD NUMBER SPECIFIC FEATURES:
All Units:
- Early dynamic brake grills
- Integrated Cab Equipment (ICE) equipment bulge on low nose
- Nathan P5 horn
- EMD Spartan cab detailed with corresponding interior
- Toilet hatch
- IC late battery boxes
- Cab mounted Sinclair and small can antennas
- Walkway-mounted spare knuckle basket
- Spartan cab 4-step walkway
- Non illuminated engineers side ground light
- Spare knuckles and holders on rear pilot
- Drop grab irons (MU hose holders) on rear pilot
- Sidesill-mounted AEI tags
- Early jacking pads
- Front / Rear flat-top ditch lights with angle kick plates
- CSX/NS style tall plow
- Early anticlimbers
- Front / Rear MU receptacles with light brown cables
- Large EFCO button
- Early speed recorder
- Early 5000 gallon fuel tank with digital fuel gauge and single sight glass
- Era Late 1999+
#1021, 1025:
- Low cab handrail
#1032:
- Standard cab handrail
#1037:
- Late-angled cab handrail
MODEL FEATURES:
- Fully-assembled and ready-to-run
- Front / rear trainline and MU hoses with silver ends
- Coupler cut levers with loops per prototype
- Sunshades and sunshade tracks per prototype
- Roof details such as antennas, air conditioners, beacons, and conduits per prototype
- Operating ditch lights
- MU receptacles and cables per prototype
- Pilot face spare knuckles and brackets per prototype
- Early or late anti-climbers
- 3 or 4 step walkways
- AEI tags mounted on the frame or jacking pads per prototype
- Safety tread on the walkways
- Several types of fuel tanks, all featuring separate gauges, sight glasses, and breather piping
- Anti-glare panel painted on the nose
- Windshield wipers
- Tinted or clear cab windows per prototype
- Detailed and painted cab interior with control stand, display screens, detailed crew seats
- Standard or Freight-style brake wheel
- See-through radiator fans
- Lift rings
- Factory installed wire grab irons
- Fine-scale Celcon handrails for scale appearance
- Underframe mounted bell- regular or electronic
- Low mount stepwell lights (non-operating)
- Dual sanding lines
- Rear pilot drop grab iron (MU hose retainer) pre prototype
- DCC-ready features Quick Plug plug-and-play technology with both 8- and 9-pin connector
- McHenry lower-shelf scale knuckle spring couplers
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately painted and printed paint schemes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
- All-wheel drive with precision gears for smooth and quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on Code 55 and larger rail
- Incandescent bulbs for realistic appearance
- Bidirectional constant lighting so headlight brightness remains constant
- Heavy die-cast frame for greater traction and more pulling power
- Packaging securely holds for the model for safe storage
- Minimum radius: 18 inch
- Recommended radius: 22 inch
SOUND EQUIPPED MODELS ALSO FEATURE:
- Onboard DCC decoder with SoundTraxx Tsunami sound
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Excellent Slow speed control
- Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
Built-&-Ready Landmark Structures - Emilios Italian Restaurant
Assembled - 4-1/8 x 4-15/32 x 4-7/32inches (10.4 x 11.3 x 10.7cm)
This specialty building features outdoor seating a classic menu board, stained glass arched windows looking into the restaurant and window awnings over the second floor windows. Four LED lights, two interior to light up both floors and two exterior above the entry ways, give this classy restaurant an inviting glow.
HO Scale Coupler Box Covers - For Athearn Rolling Stock pkg(12
Hi-Tech Details HO 6027 Antenna Dome Small Style for UP, BNSF, CR and Others
Features
Molded in white plastic and ready for finish to be applied
Hi-Tech Details HO 6003 Universal Antenna Dome GE Version for BNSF and UP
Features
Molded in white plastic and ready for finish to be applied.
Tap 00-90 and Drills #62 & #56
Hand Tap and Drill Set made from High Speed Steel. Hand Taps are the versatile, and are popular for use in taping holes for the hobby industry and general tapping. Bottoming Taps are useful for threading blind holes. A bottoming tap has almost no taper at the end because it is designed to thread all the way to the bottom of its reach.
The #1059 Tap and Drill Set is used for installing 00-90 screws.
Package Includes:
(1) 00-90 Tap (bottoming style)
(1) #62 Tap Drill
(1) #56 Clearance Drill
WARNING: Cutting tools may shatter when broken. An approved form of eye protection is strongly recommended.
#206 HO Insulated Muti-Purpose Coupler Height Gauge
Insulated Muti-Purpose Coupler Height Gauge
Includes the #148 Whisker® Coupler & #158 Scale Whisker® Coupler. - Kit.
Walthers Cornerstone Turntable Control Box
For Walthers Turntables produced 2016 or later
Use on layouts with DC or DCC train control
Simple operation & programming with:
- Programmable indexing for up to 99 different tracks
- One-touch 180-degree bridge rotation in either direction
- Simplified LED display with adjustable brightness
Operate turntable (sold separately) from up to four remote locations with additional Control Boxes
For more information and accessories go to Walthers Web site
Cornerstone Advanced Turntable Control Module
Motorized 110 Ft Turntable
HO Styrene Gearbox Shims (20pk)
For #5, 9, 20-Series & 40-Series, & whisker couplers.
Any coupler using the #232 (NO.5) or #234 gear boxes.
Shims will need to be trimmed to work with #242 whisker gear boxes.
Ditch Lights - Predrilled w/3-Volt Bulbs
EMD style
Full instructions included, Suggestion on resistor values given.
Detroit, Toledo and Ironton - DT&I - #10303
Metal wheel sets and Kadee #5 coupler installed
Date: New 11-73
Erie Lackawanna EL #20112
Metal wheel sets and Kadee #5 coupler installed
Date: NEW 1-68
HO SceneMaster City Street Accessory Package
Adds extra realism to streets and structures
Found in cities big and small from the 1960s to the present
Great value with:
- 2 curbside mailboxes
- 2 post-/wall-mounted mailboxes
- 6 trashcans w/dome tops
- 4 fire hydrants (2 each of 2 styles)
- 2 double-sided bike racks (each holds 12 bikes) --
- 2 single-sided bike racks (each holds six bikes) --
- 6 parking meters
- Phone booth w/phone
- Phone enclosure w/phone
-Easy assembly, with appropriate decals for the finishing touch
--Bicycles are available separately
Bikes with Accessories Kit
Left Hand
Powered solenoid turnout machine
Right Hand
Powered solenoid turnout machine
Carrier Reefer Unit
Kit - Fits Any Semi Reefer Trailer
NO More to be Made Again !!!
Code 83 Crossing - Nickel Silver w/Brown Ties - 90 Degrees
Plus 4 pcs 5cm 2 inches straight track
DCC Friendly
Code 83 Crossing - Nickel Silver w/Brown Ties - 30 Degrees
also includes four 1inch straight sections
Note - package was opened but was not used in layout
HO Code 100 Custom-Line(R) Crossing 90-Degrees - 6inch 15.2cm, Black Ties
Peco Code 83 SL 8382 Streamline #8 Insulfrog Turnout - Nickel Silver Left Hand HO Scale Track
Shipped from Ontario Canada
HO 30Ft Single-Track Railroad Through Girder Bridge - Low Level Kit
Product Information
This authentic Walthers Cornerstone Low-Level 30Ft Single-Track Railroad Deck Girder Bridge is typical of bridges used for decades on lines large and small. Railroad deck girder bridges are used in all kinds of arrangements across the continent. Use this kit as a stand-alone bridge supported by Cornerstone Engineered Bridge System bridge abutments or as part of a larger viaduct with piers, Steel Railroad Bridge Towers or Bridge Tower Bents. Once in place, add WalthersTrack Code 83 Bridge Track 948-83004 or other trackage of your choice (each sold separately). Kit parts come molded in dark gray plastic and feature simulated steel construction.
As shown the low-Level 30Ft Single-Track Railroad Deck Girder Bridge measures: 4-1/8 x 1-3/8 x 1-1/8inch (10.4 x 3.4 x 2.8cm)
Part of the Cornerstone Engineered Bridge System
One of the most popular railroad bridge designs with unlimited overhead and side clearance for passing trains
Fits steam, diesel and modern-eras
Available in four common lengths to match prototype practice
Build with open or ballasted deck
Perfect as approach spans for bigger Cornerstone and other bridge kits
Add to new or existing scenery with Single-Track Center Piers (933-4550) and Abutments (933-4551) available separately
Use with WalthersTrack Code 83 Bridge Track (948-83004 sold separately) plus flexible, sectional and hand-laid track or your own rail
Detailed plastic parts molded in dark gray
HO 50Ft Single Track Railroad Deck Girder Bridge - Kit
Product Information
This authentic Walthers Cornerstone 50Ft Single-Track Railroad Deck Girder Bridge is typical of bridges used for decades on lines large and small. Used in varying lengths, this bridge kit is designed to be used with Cornerstone Engineered Bridge System abutments and piers. Railroad deck girder bridges are used in all kinds of arrangements across the continent. Use this bridge as a stand-alone structure or as an approach span for larger installations. Once in place, add Walthers Code 83 Bridge Track 948-886 or 948-889 or other trackage of your choice (each sold separately). Kit parts come molded in dark gray plastic and feature simulated steel construction.
As shown the 50Ft Single-Track Railroad Deck Girder Bridge measures: 6-7/8 x 1-3/16 x 1-5/16inch (17.4 x 3 x 3.3cm).
Part of the Cornerstone Engineered Bridge System
One of the most popular railroad bridge designs with unlimited overhead and side clearance for passing trains
Fits steam, diesel and modern-eras
Available in four common lengths to match prototype practice
Build with open or ballasted deck
Perfect as approach spans for bigger Cornerstone and other bridge kits
Add to new or existing scenery with Single-Track Center Piers (933-4550) and Abutments (933-4551) available separately
Complete your installation with WalthersTrack Bridge Track 948-83004 available separately or flexible, sectional and hand-laid track or your own rail
Detailed plastic parts molded in dark gray
Use with Steel Bridge Towers and Bents
(both sold separately) to model a viaduct.
HO 70Ft Single Track Railroad Deck Girder Bridge - Kit
Product Information
This authentic Walthers Cornerstone 70Ft Single-Track Railroad Deck Girder Bridge is typical of bridges used for decades on lines large and small. Railroad deck girder bridges are used in all kinds of arrangements across the continent. Use this kit as a stand-alone bridge supported by Cornerstone Engineered Bridge System bridge abutments or as part of a larger viaduct with piers, Steel Railroad Bridge Towers or Bridge Tower Bents. Once in place, add WalthersTrack Code 83 Bridge Track 948-83004 or other trackage of your choice (each sold separately). Kit parts come molded in dark gray plastic and feature simulated steel construction.
As shown the 70Ft Single-Track Railroad Deck Girder Bridge measures: 9-5/8 x 1-3/8 x 1-1/2inch (24.4 x 3.4 x 3.8cm)
Part of the Cornerstone Engineered Bridge System
One of the most popular railroad bridge designs with unlimited overhead and side clearance for passing trains
Fits steam, diesel and modern-eras
Available in four common lengths to match prototype practice
Build with open or ballasted deck
Perfect as approach spans for bigger Cornerstone and other bridge kits
Add to new or existing scenery with Single-Track Center Piers (933-4550) and Abutments (933-4551) available separately
Complete your installation with WalthersTrack Bridge Track (948-83004 available separately or flexible, sectional and hand-laid track or your own rail
Detailed plastic parts molded in dark gray
Use with Steel Bridge Towers and Bents
(both sold separately) to model a viaduct.
HO 30ft Single-Track Railroad Deck Girder Bridge - Kit
DIMENSIONS:
4-3/16 x 1-3/16inch x 1-3/16 inches (10.6 x 3.0 x 3.0cm)
- One of the most popular railroad bridge designs with unlimited overhead & side clearance for passing trains
- Fits steam-, diesel- and modern-eras
- Available in four common lengths to match prototype practice
- Build with open or ballasted deck
- Perfect as approach spans for bigger Cornerstone and other bridge kits
- Add to new or existing scenery with Single-Track Center Piers (933-4550) and Abutments (933-4551) available separately
- Use with WalthersTrack Code 83 Bridge Track (948-83004 sold separately) plus flexible, sectional and hand-laid track or your own rail
- Detailed plastic parts molded in dark gray
HO 30Ft Single-Track Railroad Through Girder Bridge - Kit
Product Information
This Walthers Cornerstone 30Ft Single-Track Railroad Through Girder Bridge kit is based on one of the most common North American railroad bridge designs. Its part of the Cornerstone Engineered Bridge System and is designed to be compatible with system abutments and bridge piers. Plate-girder bridges are typically used to cross short distances between 30 and 90Ft 9.1 to 30.4m. Used for many decades, this design is constructed of several steel sections riveted together to form girders. They are known as through types as the track passes between, rather than on top of the spans. Its ideal for use with WalthersTrack Code 83 Bridge Track 948-83004 or other trackage of your choice. The kit can be built either as a single- or a double-track bridge. Each includes parts for two complete spans, but the design makes it easy to combine additional kits (sold separately) to build a longer or wider bridge if needed. The plastic parts are molded in color and feature authentic rivets and other fine details.
As shown the 30Ft Single-Track Railroad Through Girder Bridge is 4-7/32 x 2-3/8 x 1inch (10.7 x 6 x 2.5cm long).
Part of the Cornerstone Engineered Bridge System
One of the most common American railroad bridge designs
Used for extra clearance above highways, waterways and other railroads
Fits steam, diesel and modern eras
Girder heights vary with bridge length
Build with open or ballasted deck
Includes optional center girder for easy conversion to double track or wider right-of-way
Perfect as approach spans for bigger Cornerstone and other bridge kits
Easily added to new or existing scenery
Authentic rivets and other details
Molded in dark gray plastic
HO Double-Track Railroad Bridge Concrete Pier 2-Pack - Kit
Product Information
This Cornerstone Double-Track Railroad Bridge Concrete Pier kit is perfect for use with Cornerstone double-track bridges and is part of the Cornerstone Engineered Bridge System. The detailed structure can be built with or without a cutwater and molded cut lines allow you to customize the height to fit your bridge height. The kit includes parts for two single-track concrete bridge piers and comes molded in a concrete base color.
Part of the Cornerstone Engineered Bridge System
Common prototype design used with various types of bridges
Fits steam-, diesel- and modern-eras
Use with Cornerstone Double-Track Railroad Bridges (sold separately)
Simulates poured concrete construction
Molded cut lines for easy height adjustment
Build with or without cutwater ends for extra realism
Adaptable to other bridges
Parts for two complete piers
PLEASE NOTE: If you are planning on installing piers with the wider Single Track Truss Bridge (933-3185 sold separately), use this kit rather than the Single-Track Bridge Piers (933-4550).
HO Double-Track Railroad Bridge Concrete Abutment - Kit (2-Pack)
Product Information
The Cornerstone HO Scale Double-Track Railroad Bridge Concrete Abutment kit includes two concrete abutments with wing walls. The parts feature molded cut lines to make it easy to adjust their height to fit your scenery needs. Injection-molded parts come molded in an appropriate base color.
Part of theCornerstone HO Scale Engineered Bridge System.
Common prototype design used with various types of double-track bridges
Fits steam-, diesel- and modern-eras
Use with Cornerstone double-track railroad bridges (sold separately)
Simulates poured concrete construction
Adaptable to other bridges
Parts for two complete abutments including wing walls
Molded cut lines for easy height adjustment
Easy-to-build plastic kit molded in appropriate base color
As shown at maximum height each double-track bridge abutment measures: 11-1/4 x 3-1/4inch 28.5 x 8.2cm
HO 90ft Single-Track Railroad Deck Girder Bridge - Kit
DIMENSIONS: 12-7/16 x 1-3/16 x 1-1/2 inches (31.5 x 3 x 3.8cm)
This authentic Walthers Cornerstone 90ft Single-Track Railroad Deck Girder Bridge is typical of bridges used for decades on lines large and small. Railroad deck girder bridges are used in all kinds of arrangements across the continent. Use this kit as a stand-alone bridge supported by Cornerstone Engineered Bridge System bridge abutments or as part of a larger viaduct with piers, Steel Railroad Bridge Towers or Bridge Tower Bents. Once in place, add track of your choice (sold separately). Kit parts come molded in dark gray plastic and feature simulated steel construction.
- Part of the Cornerstone Engineered Bridge System
- One of the most popular railroad bridge designs with unlimited overhead and side clearance for passing trains
- Fits steam, diesel and modern-eras
- Available in four common lengths to match prototype practice
- Build with open or ballasted deck
- Perfect as approach spans for bigger Cornerstone and other bridge kits
- Add to new or existing scenery with Single-Track Center Piers (933-4550) and Abutments (933-4551) (available separately)
- Use with track of your choosing
- Detailed plastic parts molded in dark gray
- Use with Steel Bridge Towers and Bents (both sold separately) to model a viaduct
HO Single-Track Railroad Bridge Concrete Piers 2-Pack - Kit
Product Information
This Walthers Cornerstone HO Scale Single-Track Railroad Bridge Concrete Pier kit is perfect for use with Cornerstone single-track bridges and is part of the Cornerstone HO Scale Engineered Bridge System. This kit can be built with or without a cutwater and molded cut lines allow you to customize the height to fit your bridge height. The kit includes parts for two single-track concrete bridge piers and comes molded in a concrete base color.
Part of the Cornerstone HO Scale Engineered Bridge System.
Common prototype design used with various types of bridges
Fits steam, diesel and modern eras
Use with Cornerstone single-track railroad bridges (sold separately)
Simulates poured concrete construction
Build with or without cutwater ends for extra realism
Adaptable to other bridges
Parts for two complete piers
Molded cut lines for easy height adjustment to 4-11/32, 3-15/16, 3-1/2, 2-3/4 and 1-31/32inch 13, 11, 9, 7 & 5cm
PLEASE NOTE: If you are planning on installing piers with the wider Single Track Truss Bridge (933-3185, sold separately), use the Double-Track Railroad Bridge Concrete Pier 2-Pack (933-4552), sold separately.
HO Steel Railroad Bridge Tower Bent 2-Pack - Kit
Product Information
Walthers Cornerstone Steel Railroad Bridge Tower Bents are just the thing for constructing impressive steel viaducts on your layout. This kit includes parts for two tower bents used for supporting deck girder bridges of varying lengths.
Add realism to your HO railroad with the Cornerstone Engineered Bridge System!
Part of the Cornerstone Engineered Bridge System.
Common prototype design used with various types of bridges
Fits steam, diesel and modern-eras
Highly detailed parts
Easily cut to three different heights
Two sizes of concrete pedestals included
Use with Cornerstone Standard 30Ft, 50Ft and 70Ft Deck Girder Bridges (each sold separately) to model a continuous viaduct
Each Steel Railroad Bridge Tower Bent measures:
Width at Base: 4-1/2inch (11.4cm)
Width at Top: 1-13/64inch (3cm)
Height: 10inch (25.4cm)
Footings Large: 29/32inch (2.5cm)
Tall Small: 1/2inch (1.5cm)
Photo shows a typical viaduct modeled with Steel Railroad Bridge Tower Bent 2-Packs (933-4555), and 70Ft Standard Level Single-Track Railroad Deck Girder Bridges (933-4507), each sold separately:
HO Steel Railroad Bridge Tower - Kit
Product Information
Walthers Cornerstone Steel Railroad Bridge Towers are just the thing for constructing impressive steel viaducts on your layout. This kit includes parts for a tower used for supporting deck girder bridges of varying lengths. Bridge Towers are easily cut to different heights.
Add realism to your HO railroad with the Cornerstone Engineered Bridge System!
Part of the Cornerstone Engineered Bridge System.
Common prototype design used with various types of bridges
Fits steam, diesel and modern-eras
Highly detailed parts
Easily cut to three different heights
Two sizes of concrete pedestals included
Use with Cornerstone Standard 30Ft, 50Ft and 70Ft Deck Girder Bridges (each sold separately) to model a continuous viaduct
Assembled model measures:
Length: 4-7/16inch (11.3cm)
Width at Base: 4-1/2inch (11.4cm)
Width at Top: 1-13/64inch (3cm)
Height: 10inch (25.4cm)
Footings Large: 29/32inch (2.5cm)
Tall Small: 1/2inch (1.5cm Tall)
Photo shows a typical viaduct modeled with Steel Railroad Bridge Tower Bent 2-Pack (#933-4555), 30Ft Standard Level Single-Track Railroad Deck Girder Bridge (#933-4505) and 70Ft Standard Level Single-Track Railroad Deck Girder Bridge (#933-4507), each sold separately
Peco Code 83 SL 8381 Streamline #8 Insulfrog Turnout - Nickel Silver Right Hand HO Scale Track
Shipped from Ontario Canada
Track & Rail Cleaner & Conditioner 8oz.
Cleans your track and lays down a non-slippery conductive film that will improve current flow.This will enhance the operation of DCC and Sound Systems. May be used with most track cleaning cars.
There are a number of track cleaning devices out there: Centerline, Trix, Atlas, CMX, and Aztex are some of the cars available. You need to apply Track Cleaner to the cloth rollers or discs on these machines. Run around the track, replace the rollers of cloth with a dry pad or cloth, and run again. This will remove the residue and you should be ready to roll!
Kit - Brown pkg(6)
Kit - Blue pkg(6)
Kit - Green pkg(6)
Window Air Conditioning Unit (pkg 4) - Unit Colour Tan
Parking Meter pkg(14) - Zinc (silver)
Parking Meter pkg(14) - Yellow
Peco PL10E Switch Machine w/Extended Pin
Easy-to Install Motor for Peco Turnouts
Unit installs directly beneath the turnout and makes positive contact without linkage or other complex connections. Just cut a hole in your bench work deep enough to clear the motor and install.
HO Central Air Conditioner Unit - Kit (3pk)
Use for larger commercial or residential units. Kit includes 3 each laser-cut adhesive backed laser-board and basswood air conditioner units. Easy to assemble tab and slot construction and most of the parts are peel-n-stick. Parts are laid out on carrier sheet by paint color for easy painting.
HO Structural Flat Car Load w/Blocking (Laser-Cut Wood, Wire & Plastic Kit)
Suitable for a variety of flat cars (sold separately), this kit is a real eye catcher parked on a siding, traveling in a train or just sitting on its blocking in an industrial area. Its unique design allows the load to be anything you want: part of an overhead crane, a section of movable bridge, part of the boom on a giant scoop shovel as used in pit-mining, or anything you can imagine. The load can be hauled aboard two 30Ft, 40Ft or 50Ft flat cars with one or two idler cars, or carried on a single 60 flat.
The laser-cut kit features Peel & Stick assembly and includes all of the parts for the load, plus all the blocking, tie-down rods, and nut and washer detail. Designed for HO Scale, it can also be used in S and O scales as a smaller load. Assembled load measures: 7-3/4 x 1 x 1-1/8inch (19.6 x 2.5 x 2.8cm).
HO Two-Lane Wood Grade Crossings - Kit (12/pk)
HO Farmers Fertilizer Bulk Plant - Laser-Cut Kit
DIMESIONS:
7-3/8 x 7-5/16 inches (18.8 x 18.5cm)
Add new business alongside your railroad with this Bulk Fertilizer Plant. A familiar sight since the 1940s, these operations receive various dry ingredients in hopper cars, which are moved to inside storage bins through a series of augers and conveyors. Batches of fertilizer are then custom-mixed and loaded into special application machinery for delivery right to the field. Some operations also make and sell smaller batches in bags for gardeners and homeowners. Found all across rural America and Canada, this kit builds into a typical facility that is perfect for layouts from the 1960s to the present.
The kit features laser-cut floor, sub-roof and walls with tab and slot construction. Laser-cut peel-n-stick trim, doors, window glazing and roofing are all included for easy assembly. The kit also includes laser-cut parts for a truck-loading conveyor that can be installed at either end or side. A bucket elevator for hopper unloading, complete with unloading pan, ladder, handrails and control cabinet is also included. A set of signs rounds out the kit.
Super Expert Liquid Cement - Glue (25g)
Faller Super Expert Liquid Plastic Cement bonds plastics quickly and permanently and is the choice of experienced modelers. The easy-to-handle bottle features a special hollow needle applicator and protective cap.
Factory - kit
Quick & easy to build
Add fun to any HO scale train set or layout
Plastic parts molded in colors - no painting needed
Colorful printed signs
Complete instructions
Classic American designs found on railroads big & small
SF Shelf Whisker Metal Couplers - Medium Centerset
#118 SF Shelf Whisker Metal Couplers - Medium 9/32in Centerset Shank with #242 draft Gearboxes 2pr - Kit.
Fine Turf - Weeds
25.2 Cubic Inches Per Package
Particle size is approximately 1/1000inch - 1/32inch (0.025 mm - 0.079 mm)
Use Weeds Fine Turf to model realistic grass, low ground cover and for highlighting and accenting landscape. It is colorfast and blends naturally with other foliage. Use for any scale.
Olive Green
Available in six realistic colors and great for making bushes, hedges, shrubs and trees. Each package includes 12 oz volume of material
Medium Green
Models medium to high ground cover, such as bushes, shrubs and trees, and is the perfect product to make medium to large trees. Use for any scale. Six realistic colorfast colors. Attach to Tree Armatures with Hob-e-Tac. Use Scenic Glue to attach to layout. Purchase the Scenery Manual for additional information about how to use the Landscape System.
Particle size approximately 5/16inch - 1/2inch (7.9mm - 12.7 mm)
Each package includes 21.6 cu in (353 cu cm) volume of material.
Light Green
Models tree foliage for medium to large trees and low-to-medium ground covers, such as bushes, trees and shrubs. Use for any scale, colorfast and blends with other foliage.
Available in six realistic colors and great for making small trees too! Each package includes 32 oz volume of material. Underbrush works well for medium ground cover or undergrowth. It blends with our Foliage, Field Grass and Turf products.
1. Apply Scenic Glue (S190) to layout.
2. Press Underbrush into glue and allow to dry.
Forest Green
Models tree foliage for medium to large trees and low-to-medium ground covers, such as bushes, trees and shrubs. Use for any scale, colorfast and blends with other foliage.
Available in six realistic colors and great for making small trees too! Each package includes 32 oz volume of material. Underbrush works well for medium ground cover or undergrowth. It blends with our Foliage, Field Grass and Turf products.
1. Apply Scenic Glue (S190) to layout.
2. Press Underbrush into glue and allow to dry.
Olive Green
Models tree foliage for medium to large trees and low-to-medium ground covers, such as bushes, trees and shrubs. Use for any scale, colorfast and blends with other foliage.
Available in six realistic colors and great for making small trees too! Each package includes 32 oz volume of material. Underbrush works well for medium ground cover or undergrowth. It blends with our Foliage, Field Grass and Turf products.
1. Apply Scenic Glue (S190) to layout.
2. Press Underbrush into glue and allow to dry.
Medium Green
Models tree foliage for medium to large trees and low-to-medium ground covers, such as bushes, trees and shrubs. Use for any scale, colorfast and blends with other foliage.
Available in six realistic colors and great for making small trees too! Each package includes 32 oz volume of material. Underbrush works well for medium ground cover or undergrowth. It blends with our Foliage, Field Grass and Turf products.
1. Apply Scenic Glue (S190) to layout.
2. Press Underbrush into glue and allow to dry.
Forest Blend
Models tree foliage for medium to large trees and low-to-medium ground covers, such as bushes, trees and shrubs. Use for any scale, colorfast and blends with other foliage.
Available in six realistic colors and great for making small trees too! Each package includes 32 oz volume of material. Underbrush works well for medium ground cover or undergrowth. It blends with our Foliage, Field Grass and Turf products.
1. Apply Scenic Glue (S190) to layout.
2. Press Underbrush into glue and allow to dry.
Fine Turf - Burnt Grass - Bag (21.6 in3)
Use Burnt Grass Fine Turf to model realistic grass, low ground cover and for highlighting and accenting landscape. It is colorfast and blends naturally with other foliage!
You can use this for any scale.
Fine Turf - Soil
25.2 Cubic Inches Per Package
Use Soil Fine Turf to model realistic grass, low ground cover and for highlighting and accenting landscape. It is colorfast and blends naturally with other foliage. Use for any scale.
Dark Green
Models tree foliage for medium to large trees and low-to-medium ground covers, such as bushes, trees and shrubs. Use for any scale, colorfast and blends with other foliage.
Available in six realistic colors and great for making small trees too! Each package includes 32 oz volume of material. Underbrush works well for medium ground cover or undergrowth. It blends with our Foliage, Field Grass and Turf products.
1. Apply Scenic Glue (S190) to layout.
2. Press Underbrush into glue and allow to dry.
Blended Turf - Earth Blend - Bag (54.1 in3)
Use Earth Blend Blended Turf as an earth-tone base covering over pigmented terrain. It is colorfast and blends naturally with other foliage. Use for any scale.
Foliage Clusters - Dark Green (50.8 in3)
Model bushes, hedges, shrubs, trees, and other high ground cover, and use on hillsides to model tree masses.
Lichen - Natural
Small Bag - 86.6 in³ (1.41 dm³)
Natural lichen blends in a variety of colors and textures when combined with other Woodland Scenics landscape products, such as Turf and Foliage.
Lichen Spring Green
Small Bag - 86.6 in³ (1.41 dm³)
Natural lichen blends in a variety of colors and textures when combined with other Woodland Scenics landscape products, such as Turf and Foliage.
Foliage Clusters - Light Green (50.8 in3)
Break into any size cluster and use to model bushes, hedges, shrubs, trees, other high ground cover and use on hillsides to model tree masses. Attach to layout with Scenic Glue(TM). Purchase The Complete Guide to Model Scenery for additional information about how to use the Landscape System.
Lichen - Dark Green (86.6 in3)
This natural product is a longtime favorite of hobbyists. Its unique texture realistically blends easily with other foliages. It is non-toxic, non-flammable, and hygroscopic.
Use for any scale to model bushes, moss and other ground cover, or use as tree foliage to model quick and economical tree masses. Lichen is available in five solid colors and three mixes. Attach to Tree Armatures with Hob-e-Tac(R). Attach to layout with Scenic Glue(TM).
Forest Blend
Bag - 18 cu in (294 cu cm)
Models medium to high ground cover, such as bushes, shrubs and trees, and is the perfect product to make medium to large trees. Use for any scale. Six realistic colorfast colors. Attach to Tree Armatures with Hob-e-Tac. Use Scenic Glue to attach to layout. Purchase the Scenery Manual for additional information about how to use the Landscape System.
Particle size approximately 5/16inch - 1/2inch (7.9mm - 12.7 mm)
Each package includes 21.6 cu in (353 cu cm) volume of material.
Lichen Light Green Mix
Large Bag - 173 in³ (2.83 dm³)
Natural lichen blends in a variety of colors and textures when combined with other Woodland Scenics landscape products, such as Turf and Foliage.
Lichen - Dark Green Mix (173 in3)
This natural product is a longtime favorite of hobbyists. Its unique texture realistically blends easily with other foliages. It is non-toxic, non-flammable, and hygroscopic.
Use for any scale to model bushes, moss and other ground cover, or use as tree foliage to model quick and economical tree masses. Lichen is available in five solid colors and three mixes. Attach to Tree Armatures with Hob-e-Tac(R). Attach to layout with Scenic Glue(TM).
HO Handcar Set-Off - Kit (Laser Cut Wood)
1 x 11/16inch 2.5 x 1.8cm pkg(3)
Track workers, section gangs, signal maintainers and road masters used handcar set-offs to clear the line for passing trains, and to turn their handcars and motorcars for the return trip. Some roads required set-offs every mile, and they were often found at signals and sidings as well. Based on prototype railroad standards, this kit includes parts to build three complete stand-offs on a fill (with supports for one end) or level ground.
HO 1-3/4 inch 1-Lane Wood Grade Crossing - Kit (3/pk)
This Blair Line HO Scale Wood Grade Crossing is ready to install on your highway and road crossings. Similar to those found all over North America, laser-cut wood kits are detailed with laser-etched boards and bolt holes. These rugged crossings are perfect for industrial areas, rural areas or anywhere grade crossings are not well maintained.
Red Cab & White Box
Note only one unit
White Cab & Box
Note only one unit
HO Bridge Shoes & Adapters Assortment - 4 Units - Kit
Product Information
Add realism to your HO railroads bridges with Bridge Shoes and Adapters Assortment. This set of shoes, shims and pedestals works on Cornerstone Engineered Bridge System bridges allowing you to add the bridges to abutments and piers. The kit allows fine tuning and alignment for more reliable bridge installation.
Part of the Cornerstone HO Scale Engineered Bridge System.
Multiple styles of bridge shoes, pedestals and shims
Simplifies aligning and combining Cornerstone bridge kits for longer spans
Detailed plastic parts molded in dark gray
Includes four sprues of parts shown
9-Pin JST To NMRA 8-Pin Wiring Harness
This harness easily converts TSU-2200 or ECO-200 Digital Sound Decoders to plug and play decoders for use with models equipped with an NMRA 8-pin socket.
HO 90Ft Single-Track Railroad Through Girder Bridge - Kit
Product Information
The Walthers Cornerstone 90Ft Single-Track Railroad Through Girder Bridge kit is based on one of the most common North American railroad bridge designs. Its part of the Cornerstone Engineered Bridge System and is designed to be compatible with system abutments and bridge piers. Plate-girder bridges are typically used to cross short distances between 30 and 90Ft 9.1 to 30.4m. Used for many decades, this design is constructed of several steel sections riveted together to form girders. They are known as through types as the track passes between, rather than on top of the spans. Its ideal for use with Walthers Code 83 Bridge Track 948-83004 or other trackage of your choice. The kit can be built either as a single-track bridge but includes optional center girder for easy conversion to double-track or wider right-of-way by combining kits. The plastic parts are molded in color and feature authentic rivets and other fine details.
As shown the 90Ft Single-Track Railroad Through Girder Bridge is 12-1/2 x 2-3/8 x 1-1/2inch (31.7 x 6 x 3.8cm).
Part of the Cornerstone Engineered Bridge System
One of the most common American railroad bridge designs
Used for extra clearance above highways, waterways and other railroads
Fits steam, diesel and modern eras
Girder heights vary with bridge length
Build with open or ballasted deck
Includes optional center girder for easy conversion to double track or wider right-of-way
Perfect as approach spans for bigger Cornerstone and other bridge kits
Easily added to new or existing scenery
Authentic rivets and other details
Molded in dark gray plastic
Available in 30, 50, 70 and 90Ft lengths
HO Single-Track Railroad Bridge Concrete Abutments - Kit (2pk)
DIMENSIONS:
4-9/16 x 8-9/16 x 4-7/16 inches (11.5 x 21.7 x 11.2cm)
FEATURES:
- Injection-molded parts come molded in an appropriate base color
- Part of the Cornerstone Engineered Bridge System
- Fits steam-, diesel- and modern-eras
- Common prototype design used with various types of bridges
- Use with Cornerstone single-track railroad bridges (sold separately)
- Simulates poured concrete construction
- Adaptable to other bridges
- Parts for two complete abutments
- Molded cut lines for easy height adjustment to 2-1/8, 2-7/8 & 3-3/4 inches (5.3, 7.3 & 9.5cm)
HO 70ft Single-Track Railroad Through Girder Bridge - Kit
DIMENSIONS:
9-3/4 x 2-3/8 x 1-5/16 inches (24.7 x 6 x 3.3cm)
FEATURES:
- Compatible with system abutments and bridge piers
- Ideal for Walthers Track Code 83 Bridge Track (#948-83004) or other trackage of your choice
- One of the most common North American railroad bridge designs
- Used for extra clearance above highways, waterways and other railroads
- Fits steam, diesel and modern eras
- Girder heights vary with bridge length
- Build with open or ballasted deck
- Includes optional center girder for easy conversion to double track or wider right-of-way
- Perfect as approach spans for bigger Cornerstone and other bridge kits
- Easily added to new or existing scenery
- Authentic rivets and other details
- Molded in dark gray plastic
- Available in 30, 50, 70 and 90ft lengths
HO 50ft Single-Track Railroad Through Girder Bridge - Kit
DIMENSIONS:
6-15/16 x 2-3/8 x 1-3/32 inches (17.6 x 6 x 2.7cm)
- Part of the Cornerstone Engineered Bridge System
- One of the most common American railroad bridge designs
- Used for extra clearance above highways, waterways and other railroads
- Fits steam, diesel and modern eras
- Girder heights vary with bridge length
- Build with open or ballasted deck
- Includes optional center girder for easy conversion to double track or wider right-of-way
- Perfect as approach spans for bigger Cornerstone and other bridge kits
- Easily added to new or existing scenery
- Authentic rivets and other details
- Molded in dark gray plastic
- Available in 30, 50, 70 and 90ft lengths
HO Trackside Oil Dealer with Storage Tanks - Kit
Product Information
Prototypes for the Walthers Cornerstone Trackside Oil Dealer with Storage Tanks could be seen along North American railroad lines beginning in the 1920s as oil became popular for heating, industrial and automotive use. Oil arrived in tank cars and was transferred into on-site storage tanks. This versatile kit allows you to arrange it to fit available space. It includes a row of five tanks complete with rooftop walkways. A corrugated storage warehouse is perfect for loading barrels into trucks. At busy locations barrels would arrive in boxcars. A corrugated office and a pump house for filling up local delivery trucks can be arranged wherever needed. The Trackside Oil Dealer with Storage Tanks is just one of a wide selection of Cornerstone railroad-served industrial buildings.
Fits small towns and city scenes from 1920s to the present
Narrow design fits easily between or along tracks - perfect for shelf layouts
Separate office and warehouse buildings
Parts for five tanks, plus piping and other details
Printed signs
Molded in five colors & clear plastic
Small Shed w/Loading Dock: 5-1/2 x 4-1/2 x 3-9/16inch (13.9 x 11.4 x 9cm)
Office w/Stairs: 4 x 4-1/2 x 3inch (10.1 x 11.4 x 7.6cm)
Tank Row: 9-7/8 x 2inch x 4-1/4inch (25 x 5 x 10.7cm)
Pump House/Truck Loader: 2-3/16 x 2 x 1-3/4inch (5.5 x 5 x 4.4cm)
HO Built-ups - Motorized 110Ft Turntable w/DCC - Assembled
Product Information
Sure to be the focal point of any HO Scale engine terminal, this Walthers Cornerstone 110Ft Motorized Turntable is where steam locomotives, and later diesels, were turned around at the end of their runs. Normally serving a roundhouse, turntables were placed adjoining the roundhouse, servicing tracks and at major terminals, backshops. This 110Ft turntable is large enough to turn larger locomotives such as a 4-8-4 Northerns and 2-10-2s. Itll look great at your locomotive terminal, at junctions and anywhere else medium-sized steam locomotives must be turned. On your layout use the 110Ft Motorized Turntable as the heart of your servicing facility alongside other Cornerstone railroad maintenance structures
110Ft 33.5m length typical of bigger tables built from 1900s on - some still in service today
Must-have detail for engine terminals
Holds locos up to 15-1/4inch (38.7cm) long
Layout mounting templates for pit and Cornerstone Turntable Control Box
User-friendly, illustrated instructions simplify assembly
Requires 15-9/16inch (39.5cm) mounting hole to be cut in layout for installation
16-7/16inch (41.7cm) overall diameter
Control Box included for use on layouts with DC or DCC train control
New Cornerstone Turntable Control Box for simple operation and programming with:
Programmable indexing for up to 99 different tracks
One-touch 180-degree bridge rotation in either direction
Simplified LED display with adjustable brightness
Operable from up to four remote locations with additional Control Boxes (933-2320 each sold separately)
Optional: To control turntable operation with DCC throttle or serial UART controller, purchase Cornerstone Advanced Control Module (933-2321, available separately)
Comes complete with motor and Control Box, operates on 12-18v AC, 16-24v DC power supply (power supply not included)
Comes with Code 83 rail installed on bridge
Yellow
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
HO Mark IV Code 100 #8 Right Turnout
This Atlas Code 100 Custom-Line Mark IV Turnout features nickel silver rail and black plastic ties that match other Atlas Code 100 trackage. This turnout can be set up as a remote or manual switch with your choice of switch machine (sold separately). The turnout comes equipped with a metal frog that can be powered if necessary for your layout, and a throw bar with the extension on the straight (or outside on curved versions) stock rail side. Custom Line turnouts feature Code 100 low-oxidation nickel silver rail with a realistic cross-section and can be used with a variety of switch machines or ground throws (sold separately). Each turnout includes four rail joiners. You can use the frog power contact option to energize the frog and prevent loss of power when a locomotive is passing through. For track planning purposes Code 100 Custom-Line Mark IV Turnouts are not interchangeable with Atlas Snap Switch turnouts in layout plans.
Forest Green
Models medium to high ground cover, such as bushes, shrubs and trees, and is the perfect product to make medium to large trees. Use for any scale. Six realistic colorfast colors. Attach to Tree Armatures with Hob-e-Tac. Use Scenic Glue to attach to layout. Purchase the Scenery Manual for additional information about how to use the Landscape System.
Particle size approximately 5/16inch - 1/2inch (7.9mm - 12.7 mm)
Each package includes 21.6 cu in (353 cu cm) volume of material.
Clump Foliage - Dark Green - Bag (57.7 in3)
Mix and match with other foliage to model medium to high ground covers, create variation in trees, shrubs and bushes and to landscape hillsides. Available in five colors and a fall mix. Use for all scales. Colorfast and blends naturally with other foliage. Attach to Tree Armatures with Hob-e-Tac. Attach to layout with Scenic Glue.
Ballast - Coarse Gray - Shaker (57.7 in3)
Use ballast and coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads, and coal piles. Available in several colors and sizes, you can mix and match for a superior realistic effect. Ballast and coal are lightweight and easy to use. Watch the Woodland Scenics video about how to apply it and attach with scenic cement!
ALLERGY CAUTION: Ballast contains tree nut by-products.
Ballast - Medium Light Gray - Shaker (57.7 in3)
Use ballast and coal for any scale to model realistic railroad track, gravel roads, crushed rock and stones, hopper loads, and coal piles. Available in several colors and sizes, you can mix and match for a superior realistic effect. Ballast and coal are lightweight and easy to use. Watch the Woodland Scenics video about how to apply it and attach with scenic cement!
ALLERGY CAUTION: Ballast contains tree nut by-products.
Lubricant - Lite Oil - 1/2oz
Multi-viscosity oil with an additive that reduces its tendency to thin out at high temperatures. Good general-purpose hobby lubricant for most light to medium load-bearing applications. Includes extension tip for hard-to-reach areas.
For use on:
- R/C bearings and linkages
- HO and larger scale model railroad side rods, gears, journals and motor bearing surfaces
- Workshop and garden tools, small appliances and casters
Viscosity: cSt; at 40 Degrees Celcius ...47
Lubricant - Gear Lube - 1/2oz
A tough, long-lasting, heavy-duty hobby lubricant with tack additive for anti-drip adherence. Stays put where applied. Use on small gears and linkages with high friction points. Includes extension tip for hard-to-reach areas.
For use on:
- R/C car ball joints and large servo gears
- Model train power gears and locomotive cross heads
- Mowers, bikes, chains and overhead door rollers
Viscosity: cSt at 40 Degrees Celsius ...454
Walthers Goo 1oz 29.lmL Tube
GOO(R) is the all-purpose adhesive that grips almost anything. It never lets go. GOO is perfect for building or repairing jobs on your layout and around the house. The easy contact action of GOO produces fast-setting joints with any material. GOO works with all types of metals including steel, brass, aluminum, copper and more. It also works on plastic, wood cardboard, china, leather, vinyl, ceramics, paper, concrete and many more surfaces. GOO is a permanent rubber base adhesive that s shockproof-its as flexible as rubber. Joints won t crack when flexed back and forth, won t break loose when the temperature changes and won t weaken when wet or damp. It sticks forever! Repair shoes.
For more precise applications of GOO right from the tube, pick up a pack of Micro Tips (#904-302)! Easily added to GOO tubes or most any 3/16 inches diameter glue nozzle, the end can be trimmed for a faster/wider application if needed.
The Worst Block in Town -Kit
8 X 10 inches
Every town has to have at least one block like this! Kit includes highly detailed hydrocal castings, full color “Ghost Sign†decals custom made for this kit by Dave’s Decals, an old couch & mattress, two barren foundations & complete assembly, painting & aging instructions. Car & figures not included. 8″ x 10″.
This HO Scale kit features something none of our other kits ever had, waterslide decals. The very cool “Ghost Sign†decals were custom made for us by Dave’s Decals. Included in the kit are highly detailed hydrocal castings, […]
There no time like the first time for anything & that includes building your first hydrocal kit! Designed with rank beginners in mind, this kit features simple construction but amazing detail. The instructions for this one were specifically written for beginners. Try one, you’ll like it!
For more detail on how to start and finish model go to downtowndeco .com › TUTORIALS WITH RANDY › HOW TO ASSEMBLE, PAINT & WEATHER HYDROCAL STRUCTURE KIT step by step
HO Laser-Cut Acrylic Wheel Masks for Intermountain/Reboxx 36 Inch Wheels
These paint masks are precision cut to fit popular high quality HO scale wheel sets. It not only keeps paint off of the wheel treads leaving just the front and back wheel faces and axle exposed for color, but keeps the modeler?s hands clean as well. The mask will hold four axles and, once painted, each of its fingers can be individually pulled apart to release one wheel set at a time. Unlike cardboard masks, these will last for years! The mask is easy to assemble from 5 clear acrylic parts; a plastic solvent glue is all that is required.
HO Laser-Cut Acrylic Wheel Masks for Intermountain/Reboxx 33 Inch Wheels
These paint masks are precision cut to fit popular high quality HO scale wheel sets. It not only keeps paint off of the wheel treads leaving just the front and back wheel faces and axle exposed for color, but keeps the modeler?s hands clean as well. The mask will hold four axles and, once painted, each of its fingers can be individually pulled apart to release one wheel set at a time. Unlike cardboard masks, these will last for years! The mask is easy to assemble from 5 clear acrylic parts; a plastic solvent glue is all that is required.
HO Laser-Cut Acrylic Wheel Mask for Kadee 33 Inch Wheels
These paint masks are precision cut to fit popular high quality HO scale wheel sets. It not only keeps paint off of the wheel treads leaving just the front and back wheel faces and axle exposed for color, but keeps the modeler?s hands clean as well. The mask will hold four axles and, once painted, each of its fingers can be individually pulled apart to release one wheel set at a time. Unlike cardboard masks, these will last for years! The mask is easy to assemble from 5 clear acrylic parts; a plastic solvent glue is all that is required.
HO Public Library - Kit
Product Information
Typical of American libraries built 1900s to late 1930s, the Walthers Cornerstone Public Library is an important addition to scenes set in the early 1900s into the present. Similar buildings still serve many smaller towns and city neighborhoods today. As with many government buildings, this library projects an image of quiet power and stability. Ideal for any town from the early 1900s to the present day, buildings like this are still common in cities, suburbs and on college campuses.
As shown the kit measures: 8-1/2 x 6-1/2 x 4-3/4inch (21.5 x 16.5 x 12cm).
Easily used as city hall, police station, courthouse, school or other public building
Traditional large entry with elevated stairway
Highly detailed plastic parts simulating stone and brick construction
Finely molded windows and doors
Molded in three colors and clear plastic
HO Tall Steel Viaduct Length Extension - 80Ft - Note first picture to your left is the kit
Tall steel viaducts are some of the most spectacular and interesting types of bridges. They are used by railroads to span wide and/or steep valleys, often replacing wooden trestles. These HO and HOn3 Tall Steel Viaducts are available in three base kits, three length extension kits, a height extension kit which adds a 4th and 5th story, and a tower kit. The various kits allow you to design and build your own custom bridge of any length from one to five stories high, with full towers or bents, and straight or curved. A 10-page instruction sheet with over 35 photos and illustrations is included. These bridges are beautifully detailed and are often the centerpiece structure on modelers layouts.
HO Tall Steel Viaduct Kit - Scale Length: 210Ft 64m
Details:
Tall steel viaducts are some of the most spectacular and interesting types of bridges. They are used by railroads to span wide and/or steep valleys, often replacing wooden trestles. These HO and HOn3 Tall Steel Viaducts are available in three base kits, three length extension kits, a height extension kit which adds a 4th and 5th story, and a tower kit. The various kits allow you to design and build your own custom bridge of any length from one to five stories high, with full towers or bents, and straight or curved. A 10-page instruction sheet with over 35 photos and illustrations is included. These bridges are beautifully detailed and are often the centerpiece structure on modelers layouts.
Includes three 50Ft spans, two 30Ft spans and two towers 29inch Long x 10-3/4inch High.
HO Custom-Line Code 83 - #8 Left Hand Turnout
Custom-Line Turnouts are prototypically accurate, featuring blackened metal frogs and rivetless switch points that provide superior electrical conductivity. These turnouts can be powered using an under-table switch machine or standard remote and manual code 83 switch machines. All Custom-Line Turnouts have the same geometry as the current Atlas code 100 versions, for drop-in installation in Atlas and other layout plans.
Please note that you cannot substitute a Custom-Line for a Snap-Switch as their geometries are different.
HO Custom-Line Code 83 - #8 Right Hand Turnout
Custom-Line Turnouts are prototypically accurate, featuring blackened metal frogs and rivetless switch points that provide superior electrical conductivity. These turnouts can be powered using an under-table switch machine or standard remote and manual code 83 switch machines. All Custom-Line Turnouts have the same geometry as the current Atlas code 100 versions, for drop-in installation in Atlas and other layout plans.
Please note that you cannot substitute a Custom-Line for a Snap-Switch as their geometries are different.
ON-OFF Remote Uncoupler - 12 units
The RailCrew ON-OFF Remote Uncoupler sits under the roadbed to reliably uncouple locomotives, passenger or freight cars, no matter what brand of standard magnetic knuckle couplers you use. At just 1 3/4″ wide (44mm) and 7/8″ deep (22mm) it’s not much larger than a permanent magnet and can be easily controlled by DCC accessory decoders. It also features an LED between the rails that marks the uncoupling zone which only operates when in the “ON†position. This is handy to have as the uncoupler is totally hidden from view.
When the uncoupler is “off†it has no effect on the couplers on your equipmemt. That means you won’t have any unwanted uncoupling. This is really handy in large yards and on the mainline, especially near runaround tracks or industrial spurs.
This revolutionary new product features:
•Compact 1 3/4″(44mm) diameter x 7/8″†(22mm) height
•Easy to install on existing layouts
•Momentary 12V DC power means you can power numerous machines off of one power supply.
•Only uncouples cars when you want it to
•Works with all major brands of magnetic couplers
•Low-profile, compact design for all layout types (including multi-deck and portable layouts)
•Ideal for uncoupling both freight and passenger cars
•LED between and below the rails marks uncoupling zone when in “ON†position
The RailCrew ON-OFF Remote Uncoupler is available a single unit or in a six-pack. Installation onto an existing layout is easy: drill a 1/8″ hole between the ties at the track centre line. Insert the steel centering pin (included) into your hole saw and cut a larger hole from beneath the subroadbed using the 1/8″ hole as a guide. Push the uncoupler in from below and connect the power. That’s it. If you are doing a new layout build you can do the entire installation from above.
EMD/Blue #1202 - DCC Ready
EMD Demo/Lease -Blue
Leader PTC Antenna Array
New feature: Water sight glass
SD70ACe AND SD70M-2 SPECIFIC FEATURES
Correctly-sized operating ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or -tube- style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Standard grille or Canadian-style -louver- dynamic brake intakes
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Different jacking pads
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
New version HTCR or HTSC trucks
Non-sound QuickPlug equipped with NMRA 8-pin and 9-pin DCC plugs
McHenry scale knuckle spring couplers
Minimum radius: 18inch
Recommended radius: 22inch
EMD/Blue #1203 - DCC Ready
EMD Demo/Lease -Blue
Leader PTC Antenna Array
New feature: Water sight glass
SD70ACe AND SD70M-2 SPECIFIC FEATURES
Correctly-sized operating ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or -tube- style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Standard grille or Canadian-style -louver- dynamic brake intakes
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Different jacking pads
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
New version HTCR or HTSC trucks
Non-sound QuickPlug equipped with NMRA 8-pin and 9-pin DCC plugs
McHenry scale knuckle spring couplers
Minimum radius: 18inch
Recommended radius: 22inch
EMD/Blue #1204 - DCC Ready
EMD Demo/Lease -Blue
Leader PTC Antenna Array
New feature: Water sight glass
SD70ACe AND SD70M-2 SPECIFIC FEATURES
Correctly-sized operating ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or -tube- style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Standard grille or Canadian-style -louver- dynamic brake intakes
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Different jacking pads
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
New version HTCR or HTSC trucks
Non-sound QuickPlug equipped with NMRA 8-pin and 9-pin DCC plugs
McHenry scale knuckle spring couplers
Minimum radius: 18inch
Recommended radius: 22inch
EMD/Blue #1203 SoundTraxx Tsunami sound
EMD Demo/Lease - Blue
Leader PTC Antenna Array
New feature: Water sight glass
SD70ACe AND SD70M-2 SPECIFIC FEATURES
Correctly-sized operating ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or -tube- style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Standard grille or Canadian-style -louver- dynamic brake intakes
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Different jacking pads
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
New version HTCR or HTSC trucks
Non-sound QuickPlug equipped with NMRA 8-pin and 9-pin DCC plugs
McHenry scale knuckle spring couplers
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Ideal 30-107J Can Twist Wire Connector - Blue 10 pcs
Features
>Wire Combinations - single #14 with 1-4 22 AWG solid and/or stranded wires
Wire Combinations from 22 to 8 AWG solid and/or stranded wires
Heat-set spring threads
Flexible walls showing wires firmly connected
Easily removed for repeat useage
Quick pick up
CSA 22.2#1888 Certified
Min 3 No. 22 Max 3 No. 10
Shell Temperature Rating 105C/221F
HO Rocky Point Lighthouse - Kit
FEATURES:
- Perfect for steam or diesel-era layouts
- Traditional wooden design keepers quarters and tower
- Walls and trim molded in two realistic colors as one complete part
- Classic light tower with flashing LED tower light
- Foundation with basement windows
- Simple assembly with minimal gluing
- Easy-to-build plastic kit requires minimal gluing
- Printed interior window treatments
- Molded in seven realistic colors and clear window glazing
MEASUREMENTS:
3 x 8-1/8 x 8-7/8 inches
Kit - 2 Large Roll-Off, 2 Medium Roll-Off, 4 Scrap Metal Slide-Off
Use for HOn3 to O Scale
For HOn3 to O Scale. Kadees driver cleaner is easy to use and efficient. Just hook the power leads to a 12-volt DC source and touch the brushes against the driving wheels of your locomotive.
HO Andrews (1898) Trucks w/33 Inch Ribbed Back Wheels (1 Pair)
Metal Fully Sprung Trucks Features:
- Ready-To-Mount #148 Metal Whisker Couplers
- Code 110 (.110) #523 33 inch Ribbed Back Wheels
- Accurate Markings
- Incredible Detail True to Prototype
- Non-Magnetic Metal Wheels
- Highly Flexible Sprung Trucks
- Metal Side-frames & Fully Sprung Bolster
- Smooth tracking Free Rolling Contoured Insulated Plastic Axles
- RP-25 Free Rolling Wheels
- #637 HO Scale Truck Springs
Package Includes:
- (2) Each #510 Andrews (1898) Trucks with Coupler Platform (assembled)
- (2) Each #148 Metal Whisker Couplers
- (2) Each Coupler Gearbox
- (2) Each 0-48 Screw
- (2) Each Insulated Bushing
- (2) Each #209 Gray Insulating Fiber Washers .010 inch
- (2) #622 Knuckle Springs
The Andrews truck is also a turn of the century design that was long lived. It represents one of the first steps in the development of the modern freight truck with its cast frame. The journal boxes are bolted to the main frame. This truck was used through the end of the 1950s although by that time was only used in lighter applications such as refrigerator cars. Andrews trucks are probably still used were logging railroads remain in operation.
HO Arch Bar Fully Sprung Metal Trucks w/Whisker(R) Couplers - Kit Code 110 (.110inch) 33inch Ribbed-Back RP-25 Wheels 1 Pair
Truck Features:
Ready-to-mount metal Whisker(R) couplers
Code 110 (.110) 33h ribbed back wheels
Accurate markings
Incredible detail true to prototype
Non-magnetic metal wheels
Highly flexible sprung trucks
Metal side frames and fully sprung bolster
Smooth tracking free rolling contoured insulated axles
RP-25 free rolling wheels
Mounts with a #2 or 2-56 screw (sold separately).
HO Arch Bar Fully Sprung Metal Trucks Code 110 (.110inch) 33inch Ribbed-Back RP-25 Wheels 1 Pair
Truck Features:
Code 110 (.110) 33h ribbed back wheels
Accurate markings
Incredible detail true to prototype
Non-magnetic metal wheels
Highly flexible sprung trucks
Metal side frames and fully sprung bolster
Smooth tracking free rolling contoured insulated axles
RP-25 free rolling wheels
Mounts with a #2 or 2-56 screw (sold separately).
Hot Melt Foam Glue Sticks - 10 pcs
Low Temp Glue Sticks melt at a temperature that will not damage foam.
Built-&-Ready Landmark Structures - The Depot
Assembled - 6-9/16 x 4 inches (16.7 x 10.2cm)
The Depot is a classic whistle stop depot suitable for any layout. It features clapboard siding, a weathered cedar shake roof, covered outside passenger waiting area and a modeled interior that includes a ticket clerk figure standing before an open ticket window. Scene-setting details include a lamppost, posted train schedule, luggage carts, benches, semaphore, pigeons sitting on the roof, signage, decals and many more.
The Depot also includes one installed warm white interior LED light equipped with a plug compatible with the Just Plug Lighting System. 25mA RoHS Compliant.
Modern Dual-Sided Billboard - Assembled
Prototype History:
Completely assembled and ready to place on your layout, our Modern Yard Office is perfect for rail yards, construction sites, city dumps and more!
The prototype for this product is located at the Union Pacific (ex Southern Pacific) -J- Yard in Los Angeles. With such generic features, this style of Yard Office (or generic prefabricated metal building) is perfect for literally any railroad in the country.
Features:
- Completely Assembled!
- Injection-Molded Plastic
- Light Brown/Dark Brown
- Installed Window Glass
- Perfect for 1970s+
- Ultra-Common Design
- Extremely Accurate Detail
Model Footprint:
Length 6.75inch X Width 2.77inch (not including roof overhand)
Algoma Central In Color by Stephen M. Timko
Released February 1, 2016
Headquartered at Sault Ste. Marie, this colorful all-EMD railroad extended directly north from the Great Lakes into the wilderness of Ontario. Although most famous for its passenger trains through the beautiful Agawa Canyon, the road was also a heavy duty freight hauler carrying lumber, mining, and steel products.
Dimension: 51 X 40 Scale Feet / 7 X 5-1/2 inches.
This kit is designed with cut lines on the back side of the walls so that door and window locations are optional. Kit includes doors, windows, and down spouts.e
These Kitbasher Series kits are built up from individual components from several our existing Pikestuff kits. We have done the kit bashing for you by providing you with of the parts and instructions to build a unique building from the Pikstuff inventory. These kits require some cutting of the soft plastic. Some cut lines are not provided, but cutting is easy and the instructions will guide you through each step along the way.
HO Trackside Structures Set - Kit
Product Information
The Walthers Cornerstone HO Scale Trackside Structures Set includes easy-to-build kits for a wooden interlocking tower, crossing shanty and speeder shed. The structures match those offered in the Walthers Built-ups Trackside Structures Set but are unassembled and undecorated for easy customization and kitbashing. All parts in this version are molded in gray for ease of painting, and complete instructions for all three buildings are included. Used as a group or by themselves, these buildings say -railroad- on any layout, module or diorama scene. Theyre typical of the designs used by North American railroads large and small from the 1880s to the 1970s so they fit any location and era. Perfect for main, branch, shortline or industrial roads, you can use several sets to make your entire line more realistic. Use the Trackside Structures Set with a wide variety of Cornerstone HO Scale railroad buildings.
Easy-to-build plastic kit
Fits any North American steam or diesel-era railroad from the 1800s to the 1970s
Includes three different structures
Molded in gray plus clear window glazing
Structures in the Trackside Structures Set measure:
Crossing Shanty-Gate House: 1-3/4 x 1-7/16inch (4.5 x 3.7cm)
Interlocking Tower: 3-5/16 x 2-3/8inch (8.4 x 6.1cm)
Speeder Shed: 2 x 4-7/16inch (5.1 x 11.3cm)
HO Williams Industrial Electric Motors - Kit
Product Information
Walthers Cornerstone Williams Industrial Electric Motors is a great big city factory building that fits in a small space. Great for 1930s and later railroads, its perfect for urban trackside scenes. This five-story brick building features Art Deco detailing along the office entry side of its facade, multiple entry and dock doors on the front and sides, plus a small loading dock and canopy. Its ideal for use among other Cornerstone factory buildings. On the roof youll find three skylights and a detailed rooftop elevator machinery house. Inside, molded cut lines allow you to cut it down for use as a one-sided background building for use between your layout and background scene.
As shown, Williams Industrial Electric Motors measures: 10-1/2 x 7-7/8 x 9-3/4inch (26.6 x 20 x 24.7cm)
Williams Industrial Electric Motors is just one of a wide variety of Cornerstone industrial structures.
Big city industry that fits a small space
Perfect for steam, diesel and modern eras
Front and side loading areas for truck and rail service
Five-story brick and block construction
Separate dock, entry and overhead doors
Art Deco-era details for front wall
Detailed rooftop elevator machinery house and skylights
Colorful printed signs
Molded cut lines for easy conversion to background building
Molded in three colors and clear plastic
N Scale Sunrise Feed Mill - Kit
Product Information
The Walthers Cornerstone Sunrise Feed Mill is based on a typical grain-handling building used across the continent. Back when America moved by horses instead of horsepower, the local feed mill was an important trackside customer in towns of every size. Here, all types of grains were ground for animal feed and then bagged for easier handling and storage. Theyre still going strong in areas where livestock and dairy production requires a constant supply of feed. Many of those still in use have been expanded to include multiple modern concrete and steel elevator silos. Others serve suburban customers with pet foods, bird food, lawn and garden supplies and more. This detailed, easy-to-build model is complete with authentic wooden drop siding, a large dust collector for the roof, rail and truck or wagon unloading docks and colorful decals.
As shown the finished model measures: 9 x 2-3/8 x 4-1/4inch (22.8 x 6 x 10.6cm)
The Sunrise Feed Mill is just one of a wide variety of Cornerstone N Scale industrial buildings.
Easy-to-build plastic kit
Prototypical drop siding wood walls
Boxcar-height trackside loading doors
Rooftop dust collector
Typical structure used from the early 1900s to the present
Truck and wagon loading dock with awning
Colorful decal signs
Molded in appropriate colors
N Scale Brick Ranch House - Kit
FEATURES:
- Single story brick home with asphalt shingle roof
- Typical North American suburban home design
- Used coast to coast
- Perfect for the classic-diesel era to the present
- Two different front doors and picture windows for easy customizing
- Easy-to-build plastic kit
- Molded in three colors plus clear window glazing
DIMENSIONS:
3-1/16 x 2-9/32 x 1-1/4 inches
HO Extendible Container Chassis - Kit - 40Ft to 48Ft (2pkg)
Product Information
This Walthers SceneMaster Extendible Container Chassis is a must-have accessory for your HO Scale intermodal terminals, industry and highway scenes. Typical of equipment used all over North America from the 1980s to the present, it can be used with most containers (sold separately) from 40Ft to 48Ft long and semi tractors (sold separately). The kit includes parts for two complete chassis molded in black plastic, and illustrated instructions.
Prototypes used for hauling containers from container yard to end user
Two complete chassis per kit
Use with SceneMaster and other HO Scale Intermodal Containers
Parts molded in black
Easy-to-build kit
Tear & Plant Meadow Mat - Early Spring Meadow
DIMENSIONS:
8-5/8 x 7-7/8 inches (21.9 x 20cm)
FEATURES:
- Can be used for HO, N, O or larger scales
- A realistic grass meadow in minutes!
- Easily cut or torn into smaller pieces or to fit you available space
- Great for adding long grass to medium and large areas
- Flexible for easy use on uneven terrain
- Ready to use
- Varied colors and flocking for added realism
- Includes 10 individual grass tufts too!
- Flexible transparent base blends into existing scenery
Tear & Plant Meadow Mat - Winter Meadow
DIMENSIONS:
8-5/8 x 7-7/8 inches (21.9 x 20cm)
FEATURES:
- Can be used for HO, N, O or larger scales
- A realistic grass meadow in minutes!
- Easily cut or torn into smaller pieces or to fit you available space
- Great for adding long grass to medium and large areas
- Flexible for easy use on uneven terrain
- Ready to use
- Varied colors and flocking for added realism
- Includes 10 individual grass tufts too!
- Flexible transparent base blends into existing scenery
Tear & Plant Meadow Mat - Lowland Meadow
DIMENSIONS:
8-5/8 x 7-7/8 inches (21.9 x 20cm)
FEATURES:
- Can be used for HO, N, O or larger scales
- A realistic grass meadow in minutes!
- Easily cut or torn into smaller pieces or to fit you available space
- Great for adding long grass to medium and large areas
- Flexible for easy use on uneven terrain
- Ready to use
- Varied colors and flocking for added realism
- Includes 10 individual grass tufts too!
- Flexible transparent base blends into existing scenery
Tear & Plant Meadow Mat - Plowed Field
DIMENSIONS:
8-5/8 x 7-7/8 inches (21.9 x 20cm)
FEATURES:
- Can be used for HO, N, O or larger scales
- One piece foam casting
- Realistic texture and color
- Easily cut with utility knife for smaller areas
- Includes 10 separate grass tufts for extra detail
- Heat with hairdryer and bend to fit uneven terrain
EMD SD9, BNSF #6132, Heritage Scheme,- w/Paragon3 Sound/DC/DCC
FEATURES
- NEW Paragon3 Sound & Operation System FEATURING ROLLING THUNDERTM with Authentic Sounds and Prototypical Operation in both DC and DCC environments
- Factory Installed Engineer / Fireman Figures
- Locomotive Composition: ABS Body with Die Cast Chassis
- Couplers: (2) Operating Kadee or Compatible
- Compatible Tracks: Code 70, 83, 100 Rail
- Equipped with Traction Tires
- Minimum Operating Radius: 18 in or greater
HO Code 100 Single Slip Insulfrog - New Design
Angle: 12 degree
Length: 249mm (9 ¾in)
Nominal Radius: 610mm (24in)
SubTerrain System - Foam Risers (4in)
2/pkg - 4 x 2-1/2 x 24 inches (10.1 cm x 6.35 cm x 60.9 cm)
Risers are generally used with incline/decline starters to create varying grades on your layout. Risers are easily flexed to form curves and work on plywood or foam bases. To install, pin in place with foam nails and attach with foam tack glue or low temp foam glue gun and glue sticks.
Yellow Ocher
Use to stain rocks, plaster castings and terrain. Water soluble colors can be diluted and blended in endless combinations to model a variety of scenic effects. Extremely concentrated for economical use, each bottle includes four ounces of liquid pigment. (Photo shows plaster rock casting, sold separately, stained with this color.)
Colored Weathering Powder - Soot Black (1oz)
There are several basic methods and approaches to using these powders and we are sure you will probably develop a few of your own! These powders are intended to make rolling stock, buildings, and detail pieces look old, dirty, dusty, rusty, faded, and generally the worse for wear after being exposed to the elements of weather, travel, pollution, and mechanical wear and tear.
Individual File - Half Round
Tree Armatures Deciduous - 3 to 5 inches (28pk)
Bend and twist Tree Armature into a realistic shape. Apply Hob-e-Tac to the branches. Let dry clear and use a variety of the of the following foliage materials to make all types of trees for our layout: Underbrush, Bushes, Clump-Foliage, Foliage Clusters, Lichen, Foliage, Fine-Leaf Foliage, and Poly Fiber.
Colored Weathering Powder - Grimy Black (1oz)
There are several basic methods and approaches to using these powders and we are sure you will probably develop a few of your own! These powders are intended to make rolling stock, buildings, and detail pieces look old, dirty, dusty, rusty, faded, and generally the worse for wear after being exposed to the elements of weather, travel, pollution, and mechanical wear and tear.
Colored Weathering Powder - Light Rust (1oz)
There are several basic methods and approaches to using these powders and we are sure you will probably develop a few of your own! These powders are intended to make rolling stock, buildings, and detail pieces look old, dirty, dusty, rusty, faded, and generally the worse for wear after being exposed to the elements of weather, travel, pollution, and mechanical wear and tear.
Colored Weathering Powder - Medium Rust (1oz)
There are several basic methods and approaches to using these powders and we are sure you will probably develop a few of your own! These powders are intended to make rolling stock, buildings, and detail pieces look old, dirty, dusty, rusty, faded, and generally the worse for wear after being exposed to the elements of weather, travel, pollution, and mechanical wear and tear.
Colored Weathering Powder - Medium Gray (1oz)
There are several basic methods and approaches to using these powders and we are sure you will probably develop a few of your own! These powders are intended to make rolling stock, buildings, and detail pieces look old, dirty, dusty, rusty, faded, and generally the worse for wear after being exposed to the elements of weather, travel, pollution, and mechanical wear and tear.
Colored Weathering Powder - Dirty White (1oz)
There are several basic methods and approaches to using these powders and we are sure you will probably develop a few of your own! These powders are intended to make rolling stock, buildings, and detail pieces look old, dirty, dusty, rusty, faded, and generally the worse for wear after being exposed to the elements of weather, travel, pollution, and mechanical wear and tear.
Colored Weathering Powder - New Fresh Rust
There are several basic methods and approaches to using these powders and we are sure you will probably develop a few of your own! These powders are intended to make rolling stock, buildings, and detail pieces look old, dirty, dusty, rusty, faded, and generally the worse for wear after being exposed to the elements of weather, travel, pollution, and mechanical wear and tear.
N Scale Concrete Double-Track Super-Elevated Curve Easement - 22.5 Degrees - 11/12-3/8 Inch Radius
1 Each Left & Right
This modular track system features nickel-silver rails fully integrated to a remarkably realistic-looking roadbed. The patented Unijoiners (included) lock the track sections together firmly and evenly. The frustration of derailments resulting from uneven rail joints and separating sections is eliminated!
There is no need to glue down cork roadbed; tack down track sections and file rail connections smooth after soldering. Simply snap it together and you are ready to go!
HO Snap-Track Terminal Sections, Nickel-Silver Rail - 9inch Straight, Black Ties
HO Code 100 Custom-Line(R) Crossing - 25-Degree
4-1/2 inches (11.4cm)
Atlas HO Scale Code 100 Nickel-Silver Snap Track is widely used for sectional track layouts. Each section features nickel silver rail on black molded-plastic ties with realistic wood surface detail. Snap Track features molded centerline nail holes for easy mounting with #2540 track nails. Snap track is available in a wide variety of curve radii and straight lengths and is fully compatible with Code 100 flex track and most conventional Code 100 track systems. Snap-Track is designed for use with Atlas Snap Track turnouts and crossings and can also be used with Atlas Code 100 Custom Line turnouts. Adapter track joiners #551 are available so you can also use Code 83 track on the same layout if desired.
HO Retaining Wall - Concrete (3pcs)
Tunnel Portals, Retaining Walls, Culverts, and Roads reinforce natural terrain contours and add functionality, realism and interest to your layout. The high-density castings are detailed realistically, colored easily with Earth Colors Liquid Pigment and meet NMRA specifications.
Use Retaining Walls alone, installed adjacent to each other to create straight or curved walls or use with Tunnel Portals. Cut to varying heights to create stepped, winged walls. Color easily and realistically with Earth Colors
Liquid Pigment. Set contains three pieces.
Traffic Light Controller
Product Information:
- Realistic red-yellow-green sequence
- Operates up to four standard or two, Four-Way Hanging signals (#949-4363, each sold separately)
- Operates all SceneMaster working traffic lights
- Fully assembled, ready to use
- Simple plug-in wiring connections
- Operates on 18 volt AC from power pack accessory terminals
- Complete installation & hook up instructions
HO 43ft Water/Oil Tank w/Peaked Top - Kit
The Rix Water and Oil Tank is designed to represent riveted steel tanks which the railroads started building back in 1880 during the steam era. Today tanks similar to these are being used to hold oil and chemicals. The Rix Water and Oil Tank is made up of 6 band segments which form a complete band. The bands are then stacked one on top of another until they reach the given height. Kit include enough band segment to produce a 34 foot tall by 24 foot diameter tank with peaked top. Tank is molded in a black polystyrene.
SubTerrain System - 4% Incline/Decline Set
8 sections raise/lower 4 inches in and 16ft run.
Each section measures 2-1/2 inches wide x 24 inches long.
Incline/Decline Sets are the ideal way to alter the elevation of your track quickly and easily. Each set includes the high-density foam pieces necessary to raise or lower the elevation of your track. Incline/Decline Sets come in either 2%, 3%, or 4% grades.
Sets can start an incline at 0 inches and reach a maximum height of 4-1/2 inches. Declines can start at a maximum height of 4-1/2 inches and lower to 0 inches. Actual measurements depend on the grade used.
NOTE: One set only includes foam pieces necessary either to create an incline OR create a decline. One set cannot do both. You will need two sets to create both an incline and a decline on your layout.
To install Incline/Decline Sets, pin in place with foam nails and attach with foam tack glue or the low temp foam glue gun and glue sticks.
SubTerrain System - Foam Risers (2in)
4/pkg - 2 x 2-1/2 x 24 inches (5.08 cm x 6.35 cm x 60.9 cm)
Risers are generally used with incline/decline starters to create varying grades on your layout. Risers are easily flexed to form curves and work on plywood or foam bases. To install, pin in place with foam nails and attach with foam tack glue or low temp foam glue gun and glue sticks.
SubTerrain System - Foam Risers (1in)
4/pkg - 1 x 2-1/2 x 24 inches (2.54 cm x 6.35 cm x 60.9 cm)
Risers are generally used with incline/decline starters to create varying grades on your layout. Risers are easily flexed to form curves and work on plywood or foam bases. To install, pin in place with foam nails and attach with foam tack glue or low temp foam glue gun and glue sticks.
SubTerrain System - Foam Risers (3/4in)
4/pkg - 3/4 x 2-1/2 x 24 inches (1.9 cm x 6.35 cm x 60.9 cm)
Risers are generally used with incline/decline starters to create varying grades on your layout. Risers are easily flexed to form curves and work on plywood or foam bases. To install, pin in place with foam nails and attach with foam tack glue or low temp foam glue gun and glue sticks.
SubTerrain System - 3% Incline Starter Set
6/pkg - each piece elevates from 0 - 3/4 inch within 24 inches and measures 2-1/2 inches wide x 24 inches long
Incline Starters are wedges of high-density foam used to start your track on an incline or decline. Each piece in a package elevates/lowers the track to/from a designated number of inches within a 24 inch stretch, allowing for a smooth transition from one height to another.
To install, pin in place with foam nails and attach with foam tack glue or the low temp foam glue gun and glue sticks. Use alone or with risers.
SubTerrain System - 2% Incline Starter Set
8/pkg - each piece elevates from 0 - 1/2 inch within 24 inches and measures 2-1/2 inches wide x 24 inches long
Incline Starters are wedges of high-density foam used to start your track on an incline or decline. Each piece in a package elevates/lowers the track to/from a designated number of inches within a 24 inch stretch, allowing for a smooth transition from one height to another.
To install, pin in place with foam nails and attach with foam tack glue or the low temp foam glue gun and glue sticks. Use alone or with risers.
HO Traffic Light - Double Sided
FEATURES:
- Long-lasting LEDs
- Makes model street scenes more realistic
- Common North American-style traffic signal as used in many communities
- Fits popular modeling eras
- Great detail for day or night scenes
- Fully assembled from tough metal parts
- Install in minutes in new or existing scenery
- Color-coded wiring
- Operate with Traffic Light Controller (949-4389 sold separately)
Traffic Light - Single Sided
Now with long-lasting LEDs
Makes model street scenes more realistic
Common North American-style traffic signals as used in many communities
Fit popular modeling eras
Great detail for day or night scenes
Fully assembled from tough metal parts
Install in minutes in new or existing scenery
Color-coded wiring
Operate with Traffic Light Controller (949-4389 sold separately)
HO Post-1960s Cantilever Grade Crossing Signal - Single-Lane
FEATURES:
- Long-lasting LEDs
- Adds animation and realism to model street scenes
- Modern American cantilever-style signals as used in many communities
- Correct scale dimensions
- Install in minutes in new or existing scenery
- Fully assembled, ready to use
- Color-coded hook up wires
- Operate with Crossing Signal Controller (949-4359, sold separately)
HO Modern Cantilever Grade Crossing Signal - Single Lane
FEATURES:
- Long-lasting LEDs
- Adds animation and realism to model street scenes
- Modern American cantilever-style signals as used in many communities
- Correct scale dimensions
- Install in minutes in new or existing scenery
- Fully assembled, ready to use
- Color-coded hook up wires
- Operate with Crossing Signal Controller (949-4359, sold separately)
Traffic Light Four-Way Hanging
Now with long-lasting LEDs
Makes model street scenes more realistic
Common North American-style traffic signals as used in many communities
Fit popular modeling eras
Great detail for day or night scenes
Fully assembled from tough metal parts
Install in minutes in new or existing scenery
Color-coded wiring
Operate with Traffic Light Controller (949-4389 sold separately)
Ready-Made Realistic Trees - Deciduous - 6 to 7inch 15.2 to 17.8cm pkg(2) - Medium Green
PL-9 Mounting Plates pkg(5)
For PL-10 Series Turnout Motors
5 units Plus 10 screws
Adapter for other brands of turnouts which are not self-locking. Includes over-center spring and self-locking operating arm.
The Walthers Cornerstone HO Scale Vintage Dairy Queen is an officially licensed replica of the original 1950s design stands that soon became North American icons. Many of these colorful drive-in restaurants are still serving treats today! This easy-to-build plastic kit includes the full-color cone logo sign, interior and rooftop details. Parts are molded in two colors and the kit includes clear plastic window glazing. The Vintage Dairy Queen kit is one of many Cornerstone HO Scale businesses.
The finished Vintage Dairy Queen model as shown measures: 5-1/16 x 3-1/2 x 2-3/8in 12.8 x 8.8 x 6cm
Officially licensed replica
Full-color printed rooftop sign
Interior details
Easy-to-build plastic kit
Sorry, this product is not shippable outside the United States and Canada.
High-Hood Mount Bell - Hood Mount
- metal parts
Tidy Wire Kit - Just Plug Lighting System
Kit Contents
12 - Wire Mounts 1/2inch x 1/2inch (1.27 cm x 1.27 cm)
24 - Twist Ties 4inch (10.1 cm)
20 - Labels 3/8inch x 2inch (9.5 mm x 5.08 cm)
Instructions
Install quickly and easily to keep cables secure, tidy and easy to access for expansion. Adhesive-backed Wire Tie Mounts secure cables and Wire Ties bundle cables neatly. Use Labels to identify connections.
ConRail CR #503326
Key Features
Fully assembled and ready for your layout
Factory installed wire grab irons
Removable cast coal load in each car
Five different road numbers in each package
Machined RP25 profile metal wheels
McHenry scale knuckle spring couplers installed
Overview
Key Features
11 different road numbers
Removable coal load
Factory installed wire grab irons
100 ton roller bearing trucks
Minimum radius: 18inch
Fully-assembled and ready to run out of the box
Highly-detailed, injection-molded body
Separate wireform grab irons, etched metal coupler platforms, and/or etched metal roofwalks on select models
Separately applied brake wheel
Painted and printed for realistic decoration
Multiple road numbers
Machined metal wheels
Weighted for trouble free operation
Wheels with RP25 contours operate on Code 75, 83, 100 rail
Body mounted McHenry operating scale knuckle couplers
Window packaging for easy viewing plus interior plastic blister safely holds the model for convenient storage
Replacement parts available
Dimension: 5-1/2 X 11 inches and stands 3-3/8 inches tall.
The Atkinson Engine Facility is modeled after an existing engine facility build in the early 1970s. The Structure is designed to allow the engines to be serviced under roof and provide office and storage space for the service attendants.
This kit is designed with cut lines on the back side of the walls so that door and window locations are optional. Kit includes doors, windows, roof vents and down spouts.e
These Kitbasher Series kits are built up from individual components from several our existing Pikestuff kits. We have done the kit bashing for you by providing you with of the parts and instructions to build a unique building from the Pikstuff inventory. These kits require some cutting of the soft plastic. Some cut lines are not provided, but cutting is easy and the instructions will guide you through each step along the way.
1 Amp N/HO Scale Mobile Decoder with Short 8 pin Harness
Fits Many N/HO Locomotives with 8 pin Medium Socket
- Size: .55 x .404 x .2 inch (13.9mm x 10.3mm x 5 mm)
- N/HO Scale
- Digitrax Easy Connect 8 Pin Harness
- 1.0 Amp/1.5 Amps Peak
- 3 FX3 Functions, 0.5 Amp
- FX3 Function outputs for prototypical lighting effects and on/off control:
- Constant Brightness Lighting with directional or independent control.
- Optimized selectable LED or incandescent lamp operation
- Realistic Effects like Ditch lights, Mars lights, strobes, and many more
- Configurable Pulse Function available on all function outputs.
- FX3 & Standard Function Qualifiers operate functions based on direction,
- F0 on or off, direction and F0, and whether loco is moving.
- Function Mapping for custom function setup.
- Master Light Switch turns off all lights & functions with one keystroke.
- Advanced Consist Function Controls.
- Digitrax LocoMotion® System - Your locomotives look like the real thing.
- The Digitrax LocoMotion System makes them run like the real thing, too!
- Scaleable Speed Stabilization (Back EMF) with simple setup & 256 level resolution.
- Torque Compensation.
- 128 Speed Step operation (14 or 28 steps can also be used).
- Momentum with acceleration and deceleration.
- Normal Direction of Travel is user selectable.
- Switching Speed feature for easier and faster access to yard speeds.
- 3 Step Speed Tables set start, mid and max voltage for custom control.
- 28 Step Speed Tables with 256 level resolution for precise control.
- Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.
- Digitrax Easy Connect 8 Pin Plug to 8 pin medium plug for Track, Motor and Function Control.
- 2 Digit and 4 Digit Addressing.
- Basic, Advanced & Universal Consisting.
- SuperSonic motor drive for silent operation.
- Direct mode programming.
- Decoder Reset CV with or without speed table reset.
- Transponder Equipped ready for transponding on your Layout.
- Motor Isolation Protection helps prevent damage to your decoder.
- Automatic Analog Mode Conversion when running on DC layout.
- Decoder Lock for individual programming of multiple decoders in one loco.
The Walthers Cornerstone Truck Dump kit is based on authentic facility used for loading all kinds of materials from dump trucks into hoppers or gondolas. This kit includes a timber-supported gravel truck ramp, corrugated-metal dump house and hopper, a positionable hopper loading conveyor that can be arranged left, right or center, and a car puller. Use the Truck Dump to add a shipping facility to any siding on your 1970s and later layout.
The Truck Dump is just one of a wide variety of Cornerstone industrial buildings.
Easy-to-build plastic kit
Gravel truck ramp with timber walls
Metal dump shed and hopper
Looks at home from the 1970s to the present
Perfect for use with gondolas and hoppers
Positionable conveyor and car puller
Molded in two appropriate colors
Conveyor & Shed: 5-3/16 x 1-5/8 x 1-3/32in 13.1 x 4.1 x 2.77cm
Loading Ramp: 7 x 2 x 1-1/8in 17.7 x 5 x 2.8cm
Car Puller: 1/2 x 9/32 x 1/2in 1.2 x 0.7 x 1.2cm
HO Two-Story Frame House - Kit
FEATURES:
- Two-story wood home with basement
- Classic North American house design for middle-class neighborhoods
- Built by the thousands 1870 to 1910s
- Includes parts for two different front walls and porches
- Traditional porch trim
- Separate doors, windows and details
- Easy-to-build plastic kit
- Molded in three colors plus clear window glazing
DIMENSIONS:
5 x 2-1/2 x 4-1/16 inches
Cool White
Small in size, big in brightness. Ready to plug into Light Hub, sold separately. Simulates individual bulb. 30AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug.
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
Orange
Small in size, big in brightness. Ready to plug into Light Hub, sold separately. Simulates individual bulb. 30AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug.
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
Atlas 56 Switch Control Box
HO Mountain Lumber Company Sawmill - Kit
Product Information
Whether set in the days when Shays and Heislers ruled the forests, or served by contemporary diesels and trucks, the Walthers Cornerstone Mountain Lumber Company sawmill can be the centerpiece of any logging operation. Everything you will need to start work is included, from the log conveyor to the burner. The mill building is enclosed with board and batten siding and covered with a corrugated metal roof. This style is typical of permanent operations or those that ran in areas where the weather could turn cold. At the back is a canopied area, where fresh-cut boards are sorted. To keep the machinery running, theres a nicely detailed powerhouse with twin smokestacks. And for the final touch, you get a sawdust burner, used to dispose of scrap lumber and sawdust from the cutting operations. Typical of buildings constructed from the 1920s to the 1940s and still in use today, the Mountain Lumber Company model fits easily into steam- or diesel-era layouts.
Includes main mill, log conveyor, powerhouse and sawdust burner
Realistic wood-textured walls and canopied sorting area on main mill
Fits steam and diesel-era layouts
Printed signs
Easy-to-build plastic kit
Molded in appropriate colors
Main Building: 13 x 16 x 5-3/4inch (32.5 x 40 x14.3cm)
Log Conveyor: 3 x 21inch (7.5 x 52.5cm)
Powerhouse: 4-1/8 x 4-3/8 x 4-1/2inch (10.3 x 10.9 x 11.2cm)
Sawdust Burner: 3-7/8inch (9.6cm)
Diameter x 4-1/4inch (10.6cm) Tall
HO Dairy Queen Grill & Chill - Kit
DIMENSIONS:
7-1/4 x 5-3/8 x 2-3/4 inches (18.4 x 13.6 x 6.9cm)
- Officially licensed replica
- Contemporary design seen all across North America
- Factory-printed street and structure signs in correct colors
- Drive-thru window
- Molded in four realistic colors and clear plastic
- Easy-to-build plastic kit
16oz 455mL
Make your own rock molds with Latex Rubber. Formulated for durability, and to pick-up fine detail.
HO Three Size Modern Yard Office - Kit
This kit is designed with cut lines on the back side of the walls so that door and window locations are optional. Kit includes doors, windows and down spouts. It will build on of three different height buildings. Walls are 24 foot tall with cut lines to produce a 18 foot tall building and cut lines to produce a 12 foot tall building.
Dimensions: 30 X 40 Scale Feet 4-1/4 X 5-1/2 inches.
N Scale Short-Shank Body-Mount Coupler - Bulk Pack Kit (10 Pair)
This kit contains:
(x20) coupler knuckle shanks, ( PN #001 95 251)
(x20) coupler lip shanks (PN #001 95 295)
(x20) snap-together draft gear boxes (PN #001 95 101)
(x20) lids (PN #001 95 165)
(x20) shims (PN #001 95 522)
(x20) centering springs
(x20) 00-90 screws
(x20) trip pins (enough parts to make 10 pair #1015 couplers)
Dalman 2-Level (Talgo Style w/Knuckle Coupler)
with Medium Extension Magne-Matic couplers - Assembled
For Con-Cor and Bachmann cars, rolling stock
This style, considered -modern era- came on the scene in the late -60s.
Heavy-Duty Fire Dept. Ladder Truck - Assembled -Red
Ladder companies have always had a critical job at any fire, from rescuing people trapped inside, to assisting engine companies in getting high-pressure streams of water into the heart of the flames.
A must have for any HO Scale city, this model is complete with an extendable, rotating aerial ladder.
Each SceneMaster vehicle is a highly detailed replica, using diecast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
8 Packages
Used on Boxcars, Flatcars, Auto Racks, Cabooses & More 1970s to Present
Simulates End-of-Car Cushioning Devices that Provide Extra Protection for Fragile Loads
Realistic Appearance
Installs Easily on Most HO Models
Parts to Convert 4 Cars (2 Pockets Each)
Use with Proto MAX & Most Popular Couplers (sold separately)
HO 36inch Wheelsets w/Plastic Axles
12 in package
Quick & Easy Upgrade for Steam-, Diesel- & Modern-Era Rolling Stock
Standard Sizes for Most Freight & Passenger Cars
High Quality Turned Metal Wheels for Optimum Performance
Fits Most Popular HO Truck Styles
Fully Assembled, Ready to Use
Each Pack Converts 3 Four-Axle Cars
HO 36inch Wheelsets w/Metal Axles - pkg(12)
Quick & Easy Upgrade for Steam-, Diesel- & Modern-Era Rolling Stock
Standard Sizes for Most Freight & Passenger Cars
High Quality Turned Metal Wheels for Optimum Performance
Fits Most Popular HO Truck Styles
Fully Assembled, Ready to Use
Each Pack Converts 3 Four-Axle Cars
Norfolk Southern NS #1700 - Patch Ex Conrail
Standard plow
Ex Conrail Quality
Cab signal box
Cab armrests
Mirrors/Windwings per prototype
Low profile Fans, dustbin, exhaust, dynamic brake vent
Low profile bracket mounted S3LR
5000 gallon fuel tank
Hood side vents per prototype
Ex Conrail patched
Era: 1999+
SD45-2 FEATURES
Fully-assembled and ready-to-run
Multiple unit (MU) hoses with silver glad hands
Front and rear trainline air hose with silver glad hands
Horns per prototype
See through cab windows
Detailed and painted cab interior
Fine-scale handrails for scale appearance
HT-C trucks with Timken bearings
McHenry scale knuckle spring couplers
Accurately painted and printed paint schemes
Incandescent bulbs for realistic appearance
Scaled from prototype resources including drawings, field measurements, photographs, and more
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain for trouble free operation
All-wheel drive with precision gears for smooth and quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on Code 70, 83, and 100 rail
Bidirectional constant lighting so headlight brightness remains constant
Minimum radius: 18inch
Recommended radius: 22inch
HO Vintage 150Ft Highway Overpass Kit - with 4 Piers
20-11/16 X 3-7/16 inches
Product Information
These vintage highway overpass kits model concrete bridges built in the 1930s and 1940s, which are still used today. All parts are molded in realistic concrete color. Each overpass section is a scale 50Ft long and 25Ft wide. Modular design and interlocking parts make it easy to build longer overpasses.
Vintage Highway Overpass 50 FT. Span with 1 Adjustable Pier
6-7/8 X 3-7/16 inches
These vintage highway overpass kits model concrete bridges built in the 1930s and 1940s, which are still used today. All parts are molded in realistic concrete color. Each overpass section is a scale 50Ft long and 25Ft wide. Modular design and interlocking parts make it easy to build longer overpasses.
#1649 Roundhead Stainless Steel Screws 0-80 x 3/8inch - 12pcs
Canadian Pacific AC4400CW Diesels (1995 - 1997)-Diesel - AC4400CW - Two Flags Scheme
Description: Canadian Pacific AC4400CW Diesels (1995 - 1997)-Diesel - AC4400CW - Two Flags Scheme - Waterslide Decal - HO Scale
HO Row House - Kit
Product Information
Walthers Cornerstone Row Houses are perfect for adding big city realism to your layout. Each kit includes a pair of brick side-by-side homes with a raised concrete basement foundation with windows. In many locales row houses line the streets near large factories such as steel mills and can also be found in entire neighborhoods in urban settings. Full blocks of identical homes are easy to model by combining several kits side by side. If you have densely populated neighborhoods on your steam or diesel-era layout use the Row Houses to add realism to your layout along with other Cornerstone HO Scale housing.
Classic home for big city neighborhoods
Found in the heart of many North American cities for over 100 years
Easily combined to build a typical block or entire neighborhood of homes
Printed window treatments
Separate doors, windows, steps and downspouts
Molded in three colors and clear plastic
As shown the Row Houses kit measures: 7-13/16 x 4-9/32 x 4inch (19.8 x 10.8 x 10.1cm)
Auto Rack Loading Ramp - Kit - Yellow
DN163L0A
Fits 2011+ Version Walthers (Life-Like) PROTO N GP20 Diesel
Current Rating-Motor1.00 Amp (1.25 Amps Peak) Size0.35†x 2.12†x 0.044†(8.89mm x 53.848mm x 11.176mm) Installation Board replacement decoder Function Outputs 6-500mA
Warm White
Small in size, big in brightness. Ready to plug into Light Hub, sold separately. Simulates individual bulb. 30AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug.
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
100-Ton Truck w/Electrical Pickup (2)
Key Features
-Genesis detail with animated/spinning roller bearing caps
-Pickups and soldered wires for DCC decoder and other electronic animations
-Machined 36inch wheels with .110 tread
-Works with code 55, 70, 75, 80, 83, and 100 rail sizes
-Fully assembled and ready to install
70-Ton Truck w/Electrical Pickup (2)
Key Features
Genesis detail with animated/spinning roller bearing caps
Pickups and soldered wires for DCC decoder and other electronic animations
Machined 36inch wheels with .110 tread
Works with code 55, 70, 75, 80, 83, and 100 rail sizes
Fully assembled and ready to install
NCE 153 HO N Scale Snap-It Quad- Mk2 - Four Snap-its on one board!
FOR TWIN COIL SWITCH MACHINES ONLY
All new easy programming!
Control for 4 twin coil solenoid type switch machines (Atlas, Peco, etc)
Supports the full range of DCC accessory addresses (1-2044)
Runs from track power or external 9-15 Volt DC power supply
Easy address programming, no need to connect it to programming track
Inputs for local control panel push buttons
Simple hook up, 2 wires to the track, 2 wires to each switch machine
Easy programming! Control for 4 twin coil solenoid type switch machines. Supports the full range of DCC accessory addresses (1-2044). Runs from track power or external 9-15V DC power supply (sold separately). Easy address programming - no need to connect it to programming track. Inputs for local control and panel push buttons. Simple hook up: 2 wires to the track, 2 wires to each switch machine.
Small w/Attached D13NHP Decoder
Direct plug in to locos equipped with NMRA 8 pin plug
Features of this decoder:
NCE No-Halt_Insurance technology, keeps locos moving over dirty track
Supplied as two pre-wired modules for easier, more flexible installation
Silent RunningTM,torque compensated motor drive
Motor rating 1.3 Amp continuous, 2 Amp peak (stall)
All four function outputs have lighting effects generators
Select from 15 different lighting effects
Full support for LED lighting
H15/16-44 Atlas
Plug and play decoder for N-Scale Atlas H15-44 and H16-44, GP40-2, U25B, SD35, Trainmaster, B23-7 and others
Features of this decoder::
Preprogrammed marker lights change color depending on direction
Silent Running, torque compensated motor drive
Torque Compensation for ultra smooth low speed performance
Motor rating .7 Amp continuous, 1 Amp peak (stall)
All function outputs have lighting effects generators
Select from 15 different lighting effects
Full support for LED lighting
Decoder programming lock mechanism
Flashing Nano - Red - (colour of light)
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
Light Diffusing Window Film - Just Plug Lighting System
216 Square Inches 1394 Square Centimeters
Diffuses light evenly throughout when lights are on and eliminates the need for a building interior. Blocks the outside view through the windows of an empty building, while still allowing light to shine through the windows from the inside. Use the optional Window Tint together with Diffusing Film to make windows appear dark when lights are off. Material is easy to apply and Tint and Film will each cover approximately 216 square inches (13.9 sq dm) of window space.
Light & Hub Set - Just Plug Lighting System
quick and easy way to add lights to any project - all you need is power. Set includes two warm white LED stick-on lights. Use the individual dimmer controls to regulate light brightness.
Requires power supply 785-5770 or train power pack, each sold separately. Add an optional Auxiliary Switch 785-5725, sold separately, for convenient operation.
Modelers are able to connect the Just Plug Lighting System to DCC by using a Connecting Cable (JP5760). By plugging one end of the Connecting Cable into the CTRL Port on a Light Hub (JP5700, JP5701) or Expansion Hub (JP5702) and the other end of the Connecting Cable to a DCC relay unit (per DCC manufacturer instructions), the modeler would be able to turn lights ON/Off remotely with DCC. The dimmer controls on the Light Hubs will need to be adjusted manually.
Light Block Kit - Just Plug Lighting System
Keep light inside a structure, where it belongs. Seal all light leaks easily by pressing Ribbon Putty into interior corners and joints. Affix it along the bottom edges of structures to secure building to layout surface and block light from bleeding along foundations. Apply Masking Paint to keep light from glowing through walls and shining through windows. Putty will cover 96 linear inches (243 cm) and Paint will cover 1,200 sq. in (77.4 sq dm).
5702 Expansion Hub - Just Plug Lighting System - Use w/#785-5700 or 5701
Connect up to 4 Light Hubs
Includes 4 connecting cables
Easily add Auxiliary switch
Modelers are able to connect the Just Plug Lighting System to DCC by using a Connecting Cable (JP5760). By plugging one end of the Connecting Cable into the CTRL Port on a Light Hub (JP5700, JP5701) or Expansion Hub (JP5702) and the other end of the Connecting Cable to a DCC relay unit (per DCC manufacturer instructions), the modeler would be able to turn lights ON/Off remotely with DCC. The dimmer controls on the Light Hubs will need to be adjusted manually.
5725 Auxiliary Switch - Just Plug Lighting System Use w/#785-5700, 5701 or 5702
Control lights with the flick of a switch. Rocker style on/off switch plugs into Light and Expansion Hub Ports (sold separately). Control the power to lights on a Light Hub, an Expansion Hub or control lights on multiple hubs. Use multiple switches for various lighting configurations. Adhesive-backed for easy mounting. Easy to install into main control panel, if desired.
Flashing Nano - Yellow - (colour of light)
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
Blue - (colour of light)
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
Orange- (colour of light)
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
Green- (colour of light)
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
Red- (colour of light)
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
DH126P - 1.5 Amp Economy Decoder with Digitrax Easy Connect 9 Pin to DCC Medium Plug - 3.0 inch harness
Specifications:
Size: 0.672 x 1.074 x 0.259 inches (17.08mm x 27.28mm x 6.6mm)
Installation: DCC Medium Plug Long Harness
Function Outputs: 2
Function Type: FX3
Features: Series 6
For Use With: PX112-2
Current Rating-Functions: 0.5 Amps total all functions
Current Rating: 1.5/2.0 Amps Max
Warranty: No Worries Warranty
FX3 Function outputs for prototypical lighting effects and on/off control:
- Constant Brightness Lighting with directional or independent control.
- Realistic Effects like Ditch lights, Mars lights, strobes, and many more.
- FX3 & Standard Function Qualifiers operate functions based on direction.
- F0 on or off, direction and F0, and whether loco is moving.
- FX3 effects optimized for selectable LED or lamp operation.
- Configurable FX3 Pulse Function available on all function outputs.
- Function Remapping for custom function setup.
- Master Light Switch turns off all lights & functions with one keystroke.
- Advanced Consist Function Controls.
Digitrax LocoMotion System-Your locomotives look like the real thing.
- The Digitrax LocoMotion System makes them run like the real thing, too!
- Torque Compensation for smooth as silk silent operation.
- 128 Speed Step operation (14 or 28 steps can also be used).
- Momentum with acceleration and deceleration.
- Normal Direction of Travel is user selectable.
- Switching Speed feature for easier and faster access to yard speeds.
- 3 Step Speed Tables set start, mid and max voltage for custom control.
- 28 Step Speed Tables with 256 level resolution for precise control.
- Program CVs using any Digitrax Compatible Control system without having to buy any extra equipment.
- Series 6 Decoder Features.
- 2 Digit and 4 Digit Addressing.
- Basic, Advanced & Universal Consisting.
- SuperSonic motor drive for silent operation.
- Direct mode programming.
- Decoder Reset CV with or without speed table reset.
- Transponder Equipped ready for transponding on your Layout.
- Motor Isolation Protection helps prevent damage to your decoder.
- DCC Compatible.
- FCC Part 15, Class B RFI compliant.
Gravel - Buff Coarse
Gravel is sized to model gravel roads more realistically. Use Accent for shoulders and to model bare spots on roads.
Gravel- 10.8 in3
Accent Powder- 1.8 in3
Coverage: Models a gravel road 14 feet x 2 inches
HO 40ft Hi-Cube Corrugated Side Container - APL
(Eagle Logo)
This Walthers SceneMaster HO Scale 40ft Hi-Cube Corrugated-Side Container will add a modern touch to your intermodal terminals, highway scenes and railroad operations. Ready for service on your layout as loads for WalthersProto and WalthersMainline well cars and container flatcars, additional features of these 40ft Corrugated Containers include:
- Improved door latch detail
- Great detail for terminals and industrial scenes
- Realistic loads for any well car
- Ready to use
HO 40ft Hi-Cube Corrugated Container w/Flat Roof - CP Ships
(green, white, black; Multimark Logo)
FEATURES:
- Based on common size & style in service worldwide
- Improved door latch detail
- Great detail for terminals and industrial scenes
- Realistic loads for any well car
- Ready to use
North American-Style Code 100 Inspection Pit
Perfect for use in loco servicing scenes, roundhouses, engine houses and more. Includes pit, Code 83 rail and details.
Total Length 11.7in 297mm long
HO Metro Power & Light - Kit
DIMENSIONS:
Generating Plant 13-7/8 x 10 x 13 inches (35.2 x 25.4 x 33cm)
FEATURES:
- Typical of 1970s-and-later coal-fired power plants
- Realistic design in a size that fits most layouts
- Detailed corrugated-metal siding
- Tall smokestack
- Molded in three colors and clear plastic
- Model a complete power grid with the Cornerstone Metro Power & Light (933-4052), Northern Light & Power Powerhouse (933-3021), Northern Light and Power Substation (933-3025), High-Voltage Transmission Tower (933-3121), SceneMaster Electric Utility Pole Set (949-4120) and assorted Utility Trucks (949-11636 to 11895), each sold separately
Kit - 150ft Scale w/4 Piers
The Rix Wrought Iron Highway Overpass for HO scales is modeled after the bridges built to span over railroad tracks. The Rix Highway Overpass Wrought Iron consist of 50 foot spans which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
5701 Light Hub Only - Just Plug Lighting System
Quickly and easily add up to 4 Just Plug LED lights of your choice. Regulate brightness with individual dimmer controls.
Requires power supply 785-5770 or train power pack, each sold separately. Add an optional Auxiliary Switch 785-5725, sold separately, for convenient operation.
Modelers are able to connect the Just Plug Lighting System to DCC by using a Connecting Cable (JP5760). By plugging one end of the Connecting Cable into the CTRL Port on a Light Hub (JP5700, JP5701) or Expansion Hub (JP5702) and the other end of the Connecting Cable to a DCC relay unit (per DCC manufacturer instructions), the modeler would be able to turn lights ON/Off remotely with DCC. The dimmer controls on the Light Hubs will need to be adjusted manually.
Cool White
Simply plug into Light Hub, sold separately. 24AWG gauge wire. Two lights with 24inch 60.9 cm wire lead and plug
All Scale Connecting Cables - Just Plug Lighting System 48inch 121.9cm pkg(2)
Easy-to-install cable plugs make connections a snap. Connect Expansion Hubs to Light Hubs, Expansion Hubs to Expansion Hubs and/or connect any Hub to train power pack or DCC system (all sold separately).
Oval Speaker - 35 X 20mm
If you have more space, this speaker is great for larger models.
Dimensions: 35 x 20 x 5.3mm(D)
Frequency Response: 560Hz - 20kHz
Power: 1 Watt (Nominal) 2 Watts (Peak)
Impedance: 8 Ohms
Output: 24V AC 1000mA
Powers up to 50 lights and connects to Just Plug Light Hub or Expansion Hub, each sold separately.
N Scale Guthrie Grain Set - Kit
This elevator and grain bins represents the style used all over the country at farms and industries. The Rix N Scale Guthrie Grain offers a highly detailed elevator with ladders, platforms and distribution box along with 2 30 foot grain bins. The Grain Elevator can be built in 30 foot increments up to any height you wish. Color matches galvanized metal. The N Scale Grain Elevator is available separately (628-707) and is also packaged as an industry called Guthrie Grain. The Guthrie Grain kit includes a 60 foot tall grain elevator, two 30 foot tall grain bins and chute tubes. Additional 30 and 40 foot grain bins are also available for Rix Products. Concrete colored base not included.
Peco Code 83 SL 8377 Streamline #7 Insulfrog Turnout - Nickel Silver Left Hand Curved HO Scale Track
Shipped from Ontario Canada
Peco Code 83 SL 8376 Streamline #7 Insulfrog Turnout - Nickel Silver Right Hand Curved HO Scale Track
Shipped from Ontario Canada
Talus - Extra Coarse Brown (21.6 in3)
Create rock piles and slides, or model blasting areas. Color with Earth Colors Liquid Pigment.
Model talus (rock debris) wherever you create rock faces, outcroppings, and/or road cuts. Intermix grades and blend shades for the most realism. Color natural talus with Earth Colors(TM) Liquid Pigment, if desired. Sprinkle talus and secure with scenic cement (#191).
Particle size - Fine: 1/32 - 3/32 inch | Medium: 1/32 - 3/16 inch | Coarse: 3/16 - 3/8 inch | Extra Coarse: 3/16 - 1/2 inch
HO Tank Farm Piping & Filling Plant - Kit
Includes pump house, pipes and pipeline bridge for transferring gas or liquid goods.
HO Aral Oil Tank Farm - Kit
Build a fuel depot complete with 3 different capacity cylindrical fuel tanks that are partially connected via stairways and platforms. Set includes an office container.
EMD/Blue #1204 SoundTraxx Tsunami sound
EMD Demo/Lease - Blue
Leader PTC Antenna Array
New feature: Water sight glass
SD70ACe AND SD70M-2 SPECIFIC FEATURES
Correctly-sized operating ditch lights
Snowplow
Front and rear trainline air hose with silver tips
Multiple unit (MU) hoses with silver tips
Coupler cut bars
Train line air hoses
Flat or tapered front and rear anticlimbers
Safety tread on the walkways
Nose or cab mounted headlight
Standard or isolated cab
Windshield wipers
Tinted side windows
Mirrors
Detailed and painted cab interior with control stand, display screens, detailed crew seats and optional grade crossing camera
Airchime K5LLA horn with square or -tube- style mounting bracket
Large antenna dome
Small GPS antenna dome
Inverter box with original X-panels, X-panels with retrofitted louvers, factory louvers, late EMD large intake or retrofit large intake
See-through radiator fans
Etched dynamic brake grille and screen with appropriate grid detail underneath
Dynamic brake louver variations per prototype
Standard grille or Canadian-style -louver- dynamic brake intakes
Chicago Blower brand air blower visible behind the see-through grilles at the rear of the locomotive
Early or late hand brake housing and wheel
Early or Late Sander Brackets
Factory installed wire grab irons
Different jacking pads
Plumbing alongside the frame appropriate to the specific railroad and purchase order
Fuel tanks with single or dual fuel fillers
New version HTCR or HTSC trucks
Non-sound QuickPlug equipped with NMRA 8-pin and 9-pin DCC plugs
McHenry scale knuckle spring couplers
Minimum radius: 18inch
Recommended radius: 22inch
SOUND EQUPPED MODELS ALSO FEATURE
Onboard DCC decoder with SoundTraxx Tsunami sound
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Yellow
Licensed Replica of Popular International Trucks
Must-Have for HO Model Railroads
Perfect Size for Collectors
Positionable Parts on Many Models
Fully Assembled & Painted
Die Cast Metal & Plastic Parts
Highly detailed replica, using die cast and plastic as appropriate to create a model worthy of your layout. On some models, moving parts can be positioned so you can display the truck in realistic work situations.
Music to My Ears
4 Musicians w/Instruments, drum set, base fiddle , flute, piano
HO scale CIMC 53Ft Cargo Container Marten Set #2
53Ft CIMC Features:
-Side corrugations with an 8-55-8 arrangement
-Front wall with 10 vertical corrugations
-Roof with 6-54-6 corrugations
-1-3-1 beveled doors
-Placard Holders on front wall, sides and door
CSX Intermodal (CSXU) Set #3
53 Ft CIMC Features:
Side corrugations with an 8-55-8 arrangement
Front wall with 10 vertical corrugations
Roof with 6-54-6 corrugations
1-3-1 beveled doors
Placard Holders on front wall, sides and door
HO Modern 50Ft Highway Overpass - with Pier
The Rix Modern Highway Overpass for HO scales is modeled after the bridges built today to span over railroad tracks. This style of bridge is typical of most new construction and is used all over the country. The Rix Modern Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built. The piers are designed to be adjustable so that raising or lowering the bridge for different heights is quick and easy.
HO Rural Timber Overpass - Kit
The Rural Timber Overpass is a great addition to any layout! It represents an overpass build by most railroad to provide access to farms, homes or small town. The Rural Timber Overpass features great detail and easy assembly.
Molded in polystyrene.
HO Modern 50Ft Highway Overpass
The Rix Modern Highway Overpass for HO scales is modeled after the bridges built today to span over railroad tracks. This style of bridge is typical of most new construction and is used all over the country. The Rix Modern Highway Overpass consist of 50 foot spans which interlock together so that any length bridge can be built.
60 Ft Water/Oil tank peaked top kit
60 foot tall by 24 foot in diameter riveted steel tank with peaked top.
The Rix Water and Oil Tank is designed to represent riveted steel tanks which the railroads started building back in 1880 during the steam era. Today tanks similar to these are being used to hold oil and chemicals. The Rix Water and Oil Tank is made up of 6 band segments which form a complete band. The bands are then stacked one on top of another until they reach the given height. Kits include enough band segment to produce either a 29, 43 or 60 foot tall by 24 foot diameter tank. Two styles of tops are offered, flat top or a peaked top. All tanks are molded in a black polystyrene.
HO Yard Utility Building - Kit
This kit is designed with cut lines on the back side of the walls so that the door and window locations are optional.
Dimensions:12 X 12 scale feet / 1-5/8 X 1-5/8 inches
HO Versatile Modular Loading Docks - Kit
Kit contains four 10 X 40 foot dock modules and two ramps. Combine them in any configuration you want! They are designed to butt flush up against each other. Make a loading dock beside your industry, piggyback ramps, warehouse platforms, team track loading ramps and more!
Each module measures 1-3/8 X 5-1/2 inches.